Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Precision Fasteners and Bearings

Open

Federal

Response Deadline11/20/2026, 03:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Precision Fasteners and Bearings subcontract, issued by DLA Aviation under the Department of Defense, involves the supply of standardized and specialized hardware for prime contractors working on Navy CSI projects. The scope of work includes the delivery of bulk shipments of flat washers, spring tension washers, headed pins, and plain rod end bearings. All components must be manufactured from hardened steel and specialized alloys, with a strict requirement for full material certification and traceability for all provided hardware. This opportunity is categorized under NAICS code 332722 and will be performed in Richmond, Virginia. Interested parties must note the response deadline of November 20, 2026.

General Info

DLA Aviation subcontract for hardened steel hardware supply in Richmond, Virginia by 2026.

Agency

Department Of Defense → DLA Aviation

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

Richmond, VA, 23237, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A527R0033.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Parker Hannifin Sole Source Adds to LTC

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 20

Submission deadline

Response Deadline

11/20/2026, 03:00:00 PM ESTin 15 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Aviation

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA Aviation

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies standardized and specialized fasteners and bearings for prime contractors on Navy CSI projects. Provides flat washers, spring tension washers, headed pins, and plain rod end bearings manufactured from hardened steel and specialized alloys. Provides material certification and traceability for all hardware. Delivers bulk hardware shipments.

Similar Contracts

Same NAICS industry code

Supply of Hexagon Head Cap ScrewsThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the supply of 250 Hexagon Head Cap Screws identified by NSN 5305015885151. The contract is designated under NAICS code 332722 and requires the supplier to provide industrial fasteners to prime contractors. Performance for this contract will take place in New Cumberland, Pennsylvania. The agreement mandates strict adherence to the Berry Amendment and the Buy American Act to ensure all materials meet domestic origin requirements. Shipping will be handled according to FOB Origin and First Destination Transportation terms. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

Manufacturing of Critical Application Machine Bolts (MS35764-261)This subcontract involves the manufacture of 1,104 critical application machine bolts for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The parts must be fabricated according to MS35764H, MIL-DTL-45912C, and TDP Rev A Gen 1 specifications using precision machining, with a strict prohibition on additive manufacturing. Performance will take place in Tracy, California, under NAICS code 332722. The contractor must ensure full compliance with the Berry Amendment and maintain a quality system that adheres to either SAE AS9003 or ISO 9001 standards. Final deliverables must be packaged and labeled in accordance with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N. The response deadline for this requirement is November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

Manufacturer of Flat Washers (NSN 5310-00-178-0607)This subcontract involves the manufacture and delivery of 48 flat washers for prime contractors supporting DLA Weapons Support ASC projects. The parts must be produced according to NSN 5310-00-178-0607 technical data and adhere to either SAE AS9003 or ISO 9001 quality systems. All items must be packaged and marked in accordance with ASTM D3951, RP001, and MIL-STD-129 standards, with final delivery handled as FOB Origin to Robins Air Force Base. To be eligible, the contractor must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. Additionally, access to the US/Canada Joint Certification Program is required. The opportunity is categorized under NAICS code 332722 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

Precision Machine Screw Fabrication

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

Precision Manufacture of Shoulder Bolts (NSN 5306-01-053-0198)This subcontract involves the precision manufacture of 245 shoulder bolts for the DLA Weapons Support ASC Commodities Division under NSN 5306-01-053-0198. The contractor is responsible for fabricating the units according to Basic Drawing NR 55820 43390 Revision E and ensuring all items meet quality control standards per MIL-STD-1916 or ASQ H1331. The project requires support for source inspection of critical application items and final delivery of packaged bolts to DLA Distribution Cherry Point in accordance with MIL-STD-2073-1E. To be eligible, the contractor must hold US/Canada Joint Certification Program certification and maintain CMMC Level 2 compliance. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332722. The performance of the contract is centered in Cherry Point, North Carolina.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

Precision Retaining Ring ManufacturingThis subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, requires the precision manufacture of 4,982 retaining rings under NSN 5325002516131. Production must strictly adhere to TDP Rev A Gen 1 and Basic Drawing NR 07482 9646M06 Revision D. The project is designated as a Total Small Business Set-Aside under NAICS code 332722, with performance taking place at Robins Air Force Base. The contractor must utilize precision machining equipment and maintain strict compliance with DFARS 252.204-7012. Quality control and sampling are governed by FAR 52.246-2 and either MIL-STD-1916 or ASQ H1331 standards. The final deliverable consists of 4,982 conforming retaining rings intended for prime contractors fulfilling DLA supply contracts.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

Precision Manufacturer - Flat Washers (NSN 5310-01-592-9749)This subcontract involves the manufacture and supply of 12 high-precision flat washers for the DLA Weapons Support ASC Commodities Division. The items must be produced according to Basic Drawing NR 43689 709-5486674 Revision M, with strict prohibitions against the use of mercury or additive manufacturing. All materials and processes must comply with the Buy American Act and the Berry Amendment, and the final products must be packaged in accordance with MIL-STD-2073-1E and MIL-STD-129. Qualified providers must possess precision machining equipment and hold JCP certification along with either SAE AS9003 or ISO 9001 certification. The performance location for this contract is Tracy, California. Interested parties must submit their responses by November 13, 2026, for this Department of Defense requirement under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

Supply of Hexagon Head Cap Screws (NSN 5305-01-60-47693)This subcontract involves the supply of 63 units of hexagon head cap screws, specifically matching NSN 5305-01-60-47693, to support prime contractors for the DLA Weapons Support ASC Commodities Division. The deliverables must strictly adhere to DLA Packaging Requirements RP001 and MIL-STD-2073-1E, while following marking standards RQ017 and MIL-STD-129. Performance for this contract is based in New Cumberland. To be eligible, the provider must maintain ITAR and EAR compliance, hold US/Canada Joint Certification Program certification, and meet CMMC Level 2 cybersecurity standards. The opportunity was posted on November 5, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

Manufacture of Shear Bolts (NAS626-30)This subcontract involves the manufacture of 1,020 high-strength shear bolts, specifically NSN 5306-00-813-8089, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The work requires precision machining and forming in strict accordance with TDP Rev C Gen 3 and NAS624 through NAS644 standards, with a specific prohibition against the use of additive manufacturing. Quality assurance must be maintained through sampling per MIL-STD-1916 or ASQ H1331. To be eligible, the provider must hold SAE AS9003 or ISO 9001 certification and maintain full DFARS cybersecurity compliance. The project is categorized under NAICS code 332722, with performance taking place in New Cumberland. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

Supply of Panel Fastener Inserts (NSN 5325001232780)This subcontract involves the production and supply of 458 specialized panel fastener inserts under NSN 5325001232780 for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for ensuring all hardware meets Class 3A and 3B thread specifications per FED-STD-H28/20 and adheres to MIL-STD-130N marking requirements. Quality assurance must be conducted in accordance with MIL-STD-1916 or ASQ H1331 standards. The agreement mandates strict adherence to the Berry Amendment and the Buy American Act, alongside compliance with NIST SP 800-171 for data security. Performance of the contract will take place in Jacksonville, Florida, under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

Supply of Flat Washers (NSN 5310-01-277-5657)This subcontract involves the manufacture or procurement of 947 flat washers under NSN 5310-01-277-5657 for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for ensuring all units adhere to specific technical drawings and meet rigorous quality sampling standards per MIL-STD-1916 or ASQ H1331. Additionally, all items must be marked and packaged in accordance with MIL-STD-129, MIL-STD-2073-1E, and DLA RP001 guidelines. To be eligible, the provider must maintain SAE AS9003 or ISO 9001 certification and demonstrate cybersecurity compliance with NIST SP 800-171. The project is categorized under NAICS code 332722, with performance taking place in New Cumberland. The response deadline for this requirement is November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

Precision Angle Valve FabricationThis subcontract involves the precision fabrication of two Angle Valves, identified by NSN 4820-00-177-0272, for the DLA Weapons Support Nuclear Reactor Program. The manufacturer must strictly adhere to Basic Drawing 80020 A509519, utilizing precision machining to meet nuclear-grade tolerances. Additive manufacturing is explicitly prohibited for this project. The selected contractor must hold SAE AS9003 or ISO 9001 certification and be approved for ITAR/EAR export-controlled data and the US/Canada Joint Certification Program. Performance will take place in San Diego, California, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 12 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Aviation

Same awarding agency

Industrial Electrical InstallationThis industrial electrical installation subcontract, issued by DLA Aviation for the Department of Defense, involves performing electrical connections from facility systems to PMB equipment for prime contractors at Fleet Readiness Center, Southwest projects in San Diego. The scope of work includes the installation of industrial conduit and wiring to link systems to facility electrical sources, ensuring the final delivery of a fully powered and grounded PMB system. All work must be performed by licensed electricians and strictly adhere to NFPA 70 National Electrical Code standards. The opportunity falls under NAICS code 238210, with a response deadline set for November 20, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 17 hours ago

DEADLINE

Foundation Modification ServicesThis subcontract for Foundation Modification Services, issued by DLA Aviation for the Department of Defense, involves modifying existing concrete foundations for prime contractors at Fleet Readiness Center, Southwest in San Diego. The scope of work includes adjusting concrete slabs to fit new PMB booth footprints and applying industrial sealants to patch and seal building structures against environmental intrusion. All work must be performed in accordance with local building codes and specific facility requirements to ensure the foundations are fully prepared for equipment installation. The project is categorized under NAICS code 238110, with a response deadline set for November 20, 2026.

Poured Concrete Foundation and Structure Contractors

POSTED

about 17 hours ago

DEADLINE

PMB System Installation and RiggingThis subcontract for PMB System Installation and Rigging supports prime contractors on Fleet Readiness Center, Southwest projects in San Diego. The scope of work involves the physical installation, anchoring, and precision leveling of PMB systems, including the unloading and rigging of heavy machinery using forklifts and man-lifts. The contractor is responsible for installing anchor bolts and leveling screws to ensure all components are securely fastened to the foundation. Managed under DLA Aviation for the Department of Defense, this project requires specialized expertise and mandatory OSHA rigging and lifting certifications. The final deliverable is a fully positioned and anchored system. Interested parties must respond by November 20, 2026, under NAICS code 238990.

All Other Specialty Trade Contractors

POSTED

about 17 hours ago

DEADLINE

PMB Booth Demolition and Removal ServicesThis subcontract for PMB Booth Demolition and Removal Services involves the purging and removal of existing PMB booth systems for prime contractors supporting Fleet Readiness Center, Southwest projects in San Diego. The scope of work includes purging fluids and blast media, separating materials into drums, and removing all associated wiring, conduit, piping, and exhaust ducting. The final deliverable is a cleared site with all exhaust openings properly sealed and capped. Managed under DLA Aviation for the Department of Defense, the project requires strict adherence to OSHA safety standards and 40 CFR Part 761 regulations regarding PCBs. The opportunity is categorized under NAICS code 336612, with a response deadline set for November 20, 2026.

POSTED

about 17 hours ago

DEADLINE

Plastic Media Blasting (PMB) System ManufacturerThis subcontract through DLA Aviation involves the manufacture and supply of a custom Plastic Media Blasting (PMB) system for prime contractors operating on Fleet Readiness Center, Southwest projects in San Diego. The scope of work requires the production of two blast booths equipped with closed-loop blasting units, pneumatic recovery systems compliant with ISO 4414, and dust control systems meeting 29 CFR 1910.94(a) standards. Key technical specifications include the installation of boron carbide nozzles and rubber-lined walls, with strict adherence to MIL-P-85891A and MIL-STD-130N. The selected provider is responsible for the delivery of the manufactured booths, recovery systems, and all associated technical data. This procurement falls under NAICS code 333249 and is managed by the Department of Defense. Interested parties must note the response deadline of November 20, 2026.

Other Industrial Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

Actuating Cylinders and Maintenance Parts KitsThis subcontract through DLA Aviation involves the assembly and supply of specialized parts kits and linear actuation components for prime contractors working on Navy CSI projects. The scope of work specifically includes providing linear actuating cylinder parts kits and hydraulic accumulator parts kits, which encompass seal kits and various accumulator components intended for maintenance and repair. A critical requirement of the contract is the provision of necessary traceability and certification for all components sourced from non-OEM providers. The performance of these services is centered in Richmond, Virginia, under NAICS code 333998.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

Valves, Manifolds, and Hydraulic PumpsThis subcontract through DLA Aviation involves the supply of fluid control hardware and hydraulic sub-assemblies for prime contractors working on Navy CSI projects. The scope of work includes the sourcing and manufacture of fuel system valves, aircraft fluid manifolds, check valves, and axial piston hydraulic pump sub-assemblies. All components must be produced using aircraft-grade materials and seals, and the final deliverables must be fully tested and certified. The contract requires strict adherence to Navy CSI standards, and contractors must provide DD Form 2345 to gain necessary data access. Performance for this effort is based in Richmond, Virginia, under NAICS code 336311. The response deadline for this opportunity is November 20, 2026.

Carburetor, Piston, Piston Ring, and Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

Servo Shaft and Mechanical Drive AssembliesThis subcontract through DLA Aviation involves the supply of precision-machined shafts and drive housings for prime contractors supporting Navy CSI projects. The scope of work includes the manufacture or sourcing of mechanical drive housings and servo shaft assemblies, specifically NIIN 011587334, utilizing high-tolerance machined metals. To ensure quality and compliance, the provider must deliver finished assemblies along with full traceability and certification for all non-OEM parts. The project is categorized under NAICS code 332710 and will be performed in Richmond, Virginia. Interested parties must submit responses by November 20, 2026. Additionally, access to unclassified data related to this contract requires the submission of DD Form 2345.

POSTED

about 17 hours ago

DEADLINE

6220-01-055-9786; 26F; F-16 AIRCRAFT

Solicitation # SPE4A627R0068

DLA Aviation is seeking an Indefinite Quantity Contract for navigational lights under NSN 6220-01-555-9778. This is an other than full and open solicitation for a five year base term with an estimated annual demand of 19 units. To be considered, vendors must propose approved sources of supply, specifically Control Products Corporation or Grimes Aerospace Company. The contract terms are FOB Origin with inspection and acceptance at the destination for DLA Direct, and required delivery is 258 days to any facility within the Continental United States. The solicitation is tentatively scheduled for release on November 23, 2026, and may involve a reverse auction conducted via the Procurex system. Proposals must be submitted directly to the bid custodian, as electronic submissions through DIBBS are unacceptable. While the solicitation documents will be available for download via the DIBBS homepage, no paper copies will be provided.

Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

about 17 hours ago

DEADLINE

6150-01-657-2104; YJN; VIRGINIA CLASS SUBMARINE

Solicitation # SPE4A627R0075

Other Electronic Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

PARTS KIT,VALVE,OVERHAUL; NSN: 1660-00-442-2007, PR: 7017536534, P/N: 9776122-10, WSDC: Z9N, AIRCRAFT, FA-18, A-D, E/F, G (GROWLER)

Solicitation # SPE4A727R0079

This procurement request from DLA Aviation is for 742 valve overhaul parts kits, part number 9776122-10, under NSN 1660-00-442-2007. These components are designated as Critical Safety and Critical Application Items intended for FA-18 aircraft. The solicitation will result in a firm fixed price contract with delivery terms set as FOB Destination and inspection and acceptance occurring at the origin. Approved sources include Lynn Electronics LLC, the United States Department of the Air Force, System Technical Support Corporation, and Conquest Machine, Inc. Any other manufacturers wishing to bid must submit a complete source approval package. This is a total small business set-aside opportunity with a response deadline of December 21, 2026. Award decisions will be based on a combination of price, past performance via the Supplier Performance Risk System, and other evaluation factors.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in about 2 months

Sources Sought F108 COI NSN 2915-016838300 / NSN 5310-017389802

Solicitation # SPE4AX27RF108ADDS1

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Supply of Socket Head Cap Screws (NSN 5305-01-0086703)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Manufacturer of Self-Locking Hexagon Nuts (NSN 5310-01-524-5026)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Small Business Set Aside for Spherical Washers per attachments. Request Access to the drawings through SAM. Provide your Cage Code when requesting access in SAM.

Solicitation # N61331-27-Q-KS04

Naval Surface Warfare Center

POSTED

about 17 hours ago

DEADLINE

53--NUT,SELF-LOCKING,HEXAG

Solicitation # SPE4A6-27-T-8772

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

53--BOLT,INTERNAL WRENCHIN

Solicitation # SPE4A6-27-T-8904

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

53--WASHER,LOCK

Solicitation # SPE4A5-27-T-2366

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

53--SCREW,CAP,SOCKET HEAD

Solicitation # SPE4A6-27-T-8900

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

53--NUT,PLAIN,ASSEMBLED WASHER

Solicitation # SPE4A6-26-T-31WS

Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

53--SCREW,CLOSE TOLERANCE

Solicitation # SPE4A6-27-T-9068

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-8771

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

SPE4A726R0496-Justification

Solicitation # SPE4A726R0496-Justification

POSTED

about 17 hours ago

DEADLINE

53--BOLT,SHOULDER

Solicitation # SPE4A6-27-T-8962

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS