Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Valves, Manifolds, and Hydraulic Pumps

Open

Federal

Response Deadline11/20/2026, 03:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract through DLA Aviation involves the supply of fluid control hardware and hydraulic sub-assemblies for prime contractors working on Navy CSI projects. The scope of work includes the sourcing and manufacture of fuel system valves, aircraft fluid manifolds, check valves, and axial piston hydraulic pump sub-assemblies. All components must be produced using aircraft-grade materials and seals, and the final deliverables must be fully tested and certified. The contract requires strict adherence to Navy CSI standards, and contractors must provide DD Form 2345 to gain necessary data access. Performance for this effort is based in Richmond, Virginia, under NAICS code 336311. The response deadline for this opportunity is November 20, 2026.

General Info

Supply fluid control hardware and hydraulic sub-assemblies for Navy CSI projects by November 2026.

Agency

Department Of Defense → DLA Aviation

NAICS

336311 - Carburetor, Piston, Piston Ring, and Valve Manufacturing

Place of Performance

Richmond, VA, 23237, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A527R0033.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Parker Hannifin Sole Source Adds to LTC

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 20

Submission deadline

Response Deadline

11/20/2026, 03:00:00 PM ESTin 15 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Aviation

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA Aviation

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies fluid control hardware and hydraulic sub-assemblies for prime contractors on Navy CSI projects. Sources or manufactures fuel system valves, aircraft fluid manifolds, axial piston hydraulic pump subassemblies, and check valves using aircraft-grade materials and seals. Adheres to Navy CSI standards and requires DD Form 2345 for data access. Delivers tested and certified valves, manifolds, and pumps.

Similar Contracts

Same NAICS industry code

Damper Piston Valve Manufacturer/Supplier

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

Valve Seat Manufacturing and SupplyThis subcontract involves the manufacturing and supply of 25 valve seats for prime contractors supporting DLA Weapons Support projects under the Department of Defense. The selected provider must manufacture or source components identified by NSN 4820010089469 and ensure all items strictly adhere to the packaging and marking standards outlined in MIL-STD-2073-1E. Eligibility for this contract is restricted to small businesses operating under NAICS code 336311. The opportunity was posted by DLA DIST SAN JOAQUIN on November 5, 2026, with a response deadline set for November 16, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 17 hours ago

DEADLINE

Cylinder Sleeve and Piston Assembly ManufacturerThis small business set-aside subcontract involves the manufacture and supply of 300 cylinder sleeve and piston assembly kits for the DLA Weapons Support Land Supply Chain. The contractor is responsible for producing components according to NSN 2815012719822 and part numbers 2DR671 and 3802401 using precision CNC machining. All work must strictly adhere to the DLA Master List requirements, and the use of additive manufacturing is expressly prohibited. The project requires full compliance with DFARS 252.204-7012 standards and adherence to the Buy American Act and Berry Amendment. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by November 16, 2026, under NAICS code 336311.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Diesel Engines (NSN 7RH 2815-01-282-6430)This subcontract involves the supply of two diesel engines under NSN 7RH 2815-01-282-6430 for prime contractors supporting the Department of Defense via the DLA Aviation office in Philadelphia. The scope of work requires the manufacturer or procurer to ensure all units meet strict Critical Safety Item requirements in accordance with DFARS 252.209-7010 and undergo Product Verification Testing as mandated by DLAD 46.292. Logistical requirements specify that all engines must be packaged and palletized following MIL-STD-2073, MIL-STD-147, and ANSI MH1-2016 standards. The opportunity falls under NAICS code 336311, with a response deadline set for November 30, 2026.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Engine Starting Ion Cylinder SupplyThis subcontract, issued by the DLA Weapons Support Land Supply Chain under the Department of Defense, involves the supply of 259 dozen Ion Cylinders used as engine cold starting aids. The contractor is responsible for manufacturing or sourcing components for NSN 2910-00-646-9727, ensuring all items comply with the DLA Master List of Technical and Quality Requirements and meet strict technical specifications through rigorous quality control. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336311, with the place of performance located in Tracy, California. Interested parties must adhere to the response deadline of November 9, 2026, to provide these essential components to prime contractors delivering DLA supply contracts.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Outboard Motor & Propulsion SystemThis subcontract, managed by DAS Procurement for the State of Connecticut, involves the supply and installation of a high-horsepower outboard motor and propulsion system for prime contractors working on CT DEEP Fisheries Division projects. The scope of work requires the installation of a 90hp four-stroke engine equipped with an aluminum propeller and skeg, along with the setup of throttle controls operational from the console seat. To ensure a fully operational integrated system, the installation must include electric starting and power trim and tilt systems according to OEM specifications. The opportunity is categorized under NAICS code 336311 and was posted on October 28, 2026. Interested parties must submit their responses by the deadline of November 12, 2026. Further details and submission guidelines can be accessed through the CTSource Bid Board portal.

DAS Procurement

POSTED

DEADLINE

Diesel Fire Pump Engine SupplierThis subcontract agreement establishes a supplier for replacement diesel fire pump drive engines and necessary mounting hardware to support prime contractors on Illinois Department of Corrections facility projects, specifically for the Sheridan Correctional Center. The supplier is responsible for the procurement and delivery of engines that strictly adhere to State specifications and comply with 30 ILCS 565 Buy American requirements regarding steel products. The contract mandates a minimum 12-month warranty against defects for all provided equipment. Interested parties must respond to the solicitation by November 9, 2026, to provide the required materials under NAICS code 336311.

SHERIDANCC426 - Sheridan Correctional Center

POSTED

DEADLINE

Powertrain Supply (Engine & Transmission)This subcontract, managed by the Department of Defense under agency W6QK Acc- Dta, involves the supply and integration of primary propulsion systems for U.S. Army Infantry Squad Vehicle projects. The selected provider will be responsible for delivering high-performance automotive engines and transmissions that adhere to strict military specifications, with production scales ranging from 100 to over 1,500 units. Beyond the delivery of completed engine and transmission assemblies, the contractor must provide essential technical data, interface-control information, and detailed parts documentation to ensure long-term sustainment. The opportunity is categorized under NAICS code 336311, with a response deadline set for November 25, 2026.

POSTED

DEADLINE

Police and Emergency Vehicle UpfittingThis subcontract for Police and Emergency Vehicle Upfitting involves providing specialized installation and modification services for prime contractors working on City of Clermont emergency service projects. The scope of work includes the installation of wiring, mounting hardware, and emergency equipment, as well as secondary color painting for vehicles such as Police Interceptors. The contractor is responsible for ensuring all accessories meet quality standards and include manufacturer warranties to deliver fully upfitted and operational emergency vehicles. This opportunity is managed by Procurement Services in Florida under NAICS code 336311, with a response deadline set for November 12, 2026.

Procurement Services

POSTED

DEADLINE

Carbody, Underframe, and HVAC SupplyThis subcontract for Metra locomotive projects involves the supply of essential carbody hardware, glazing, and HVAC components to prime contractors. The scope of work includes providing couplers, draft gear, hoses, valves, lamps, weatherstripping, and HVAC systems, all of which must adhere to OEM standards. Additionally, the provider is responsible for delivering comprehensive carbody and underframe equipment kits. The opportunity is categorized under NAICS code 336311 and was posted on October 13, 2026. Interested parties must submit their responses by the deadline of November 9, 2026. This procurement is managed by Metra in Illinois.

POSTED

DEADLINE

Truck and Suspension Component SupplyThis subcontract for Metra in Illinois focuses on the supply of critical components required for the remanufacture of locomotive truck assemblies. The scope of work involves providing suspension components and new wheels that adhere strictly to original equipment manufacturer standards, as well as the delivery of comprehensive truck overhaul kits to support prime contractors. The opportunity is categorized under NAICS code 336311 and was posted on October 13, 2026. Interested parties must submit their responses by the deadline of November 9, 2026.

POSTED

DEADLINE

Engine Components & EUI Kit SupplyThis subcontract focuses on the supply of OEM engine components and Electronic Unit Injection conversion kits for prime contractors working on Metra locomotive projects in Illinois. The scope of work includes the delivery of EMDEC electronic fuel injection systems, UTEX turbochargers, bearings, pumps, gears, and camshafts, all of which must adhere to 40 CFR Part 1033 emissions standards. The opportunity is categorized under NAICS code 336311 and was posted on October 13, 2026. Interested parties must submit their responses by the deadline of November 9, 2026.

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Aviation

Same awarding agency

Industrial Electrical InstallationThis industrial electrical installation subcontract, issued by DLA Aviation for the Department of Defense, involves performing electrical connections from facility systems to PMB equipment for prime contractors at Fleet Readiness Center, Southwest projects in San Diego. The scope of work includes the installation of industrial conduit and wiring to link systems to facility electrical sources, ensuring the final delivery of a fully powered and grounded PMB system. All work must be performed by licensed electricians and strictly adhere to NFPA 70 National Electrical Code standards. The opportunity falls under NAICS code 238210, with a response deadline set for November 20, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 17 hours ago

DEADLINE

Foundation Modification ServicesThis subcontract for Foundation Modification Services, issued by DLA Aviation for the Department of Defense, involves modifying existing concrete foundations for prime contractors at Fleet Readiness Center, Southwest in San Diego. The scope of work includes adjusting concrete slabs to fit new PMB booth footprints and applying industrial sealants to patch and seal building structures against environmental intrusion. All work must be performed in accordance with local building codes and specific facility requirements to ensure the foundations are fully prepared for equipment installation. The project is categorized under NAICS code 238110, with a response deadline set for November 20, 2026.

Poured Concrete Foundation and Structure Contractors

POSTED

about 17 hours ago

DEADLINE

PMB System Installation and RiggingThis subcontract for PMB System Installation and Rigging supports prime contractors on Fleet Readiness Center, Southwest projects in San Diego. The scope of work involves the physical installation, anchoring, and precision leveling of PMB systems, including the unloading and rigging of heavy machinery using forklifts and man-lifts. The contractor is responsible for installing anchor bolts and leveling screws to ensure all components are securely fastened to the foundation. Managed under DLA Aviation for the Department of Defense, this project requires specialized expertise and mandatory OSHA rigging and lifting certifications. The final deliverable is a fully positioned and anchored system. Interested parties must respond by November 20, 2026, under NAICS code 238990.

All Other Specialty Trade Contractors

POSTED

about 17 hours ago

DEADLINE

PMB Booth Demolition and Removal ServicesThis subcontract for PMB Booth Demolition and Removal Services involves the purging and removal of existing PMB booth systems for prime contractors supporting Fleet Readiness Center, Southwest projects in San Diego. The scope of work includes purging fluids and blast media, separating materials into drums, and removing all associated wiring, conduit, piping, and exhaust ducting. The final deliverable is a cleared site with all exhaust openings properly sealed and capped. Managed under DLA Aviation for the Department of Defense, the project requires strict adherence to OSHA safety standards and 40 CFR Part 761 regulations regarding PCBs. The opportunity is categorized under NAICS code 336612, with a response deadline set for November 20, 2026.

POSTED

about 17 hours ago

DEADLINE

Plastic Media Blasting (PMB) System ManufacturerThis subcontract through DLA Aviation involves the manufacture and supply of a custom Plastic Media Blasting (PMB) system for prime contractors operating on Fleet Readiness Center, Southwest projects in San Diego. The scope of work requires the production of two blast booths equipped with closed-loop blasting units, pneumatic recovery systems compliant with ISO 4414, and dust control systems meeting 29 CFR 1910.94(a) standards. Key technical specifications include the installation of boron carbide nozzles and rubber-lined walls, with strict adherence to MIL-P-85891A and MIL-STD-130N. The selected provider is responsible for the delivery of the manufactured booths, recovery systems, and all associated technical data. This procurement falls under NAICS code 333249 and is managed by the Department of Defense. Interested parties must note the response deadline of November 20, 2026.

Other Industrial Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

Precision Fasteners and BearingsThe Precision Fasteners and Bearings subcontract, issued by DLA Aviation under the Department of Defense, involves the supply of standardized and specialized hardware for prime contractors working on Navy CSI projects. The scope of work includes the delivery of bulk shipments of flat washers, spring tension washers, headed pins, and plain rod end bearings. All components must be manufactured from hardened steel and specialized alloys, with a strict requirement for full material certification and traceability for all provided hardware. This opportunity is categorized under NAICS code 332722 and will be performed in Richmond, Virginia. Interested parties must note the response deadline of November 20, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

Actuating Cylinders and Maintenance Parts KitsThis subcontract through DLA Aviation involves the assembly and supply of specialized parts kits and linear actuation components for prime contractors working on Navy CSI projects. The scope of work specifically includes providing linear actuating cylinder parts kits and hydraulic accumulator parts kits, which encompass seal kits and various accumulator components intended for maintenance and repair. A critical requirement of the contract is the provision of necessary traceability and certification for all components sourced from non-OEM providers. The performance of these services is centered in Richmond, Virginia, under NAICS code 333998.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

Servo Shaft and Mechanical Drive AssembliesThis subcontract through DLA Aviation involves the supply of precision-machined shafts and drive housings for prime contractors supporting Navy CSI projects. The scope of work includes the manufacture or sourcing of mechanical drive housings and servo shaft assemblies, specifically NIIN 011587334, utilizing high-tolerance machined metals. To ensure quality and compliance, the provider must deliver finished assemblies along with full traceability and certification for all non-OEM parts. The project is categorized under NAICS code 332710 and will be performed in Richmond, Virginia. Interested parties must submit responses by November 20, 2026. Additionally, access to unclassified data related to this contract requires the submission of DD Form 2345.

POSTED

about 17 hours ago

DEADLINE

6220-01-055-9786; 26F; F-16 AIRCRAFT

Solicitation # SPE4A627R0068

DLA Aviation is seeking an Indefinite Quantity Contract for navigational lights under NSN 6220-01-555-9778. This is an other than full and open solicitation for a five year base term with an estimated annual demand of 19 units. To be considered, vendors must propose approved sources of supply, specifically Control Products Corporation or Grimes Aerospace Company. The contract terms are FOB Origin with inspection and acceptance at the destination for DLA Direct, and required delivery is 258 days to any facility within the Continental United States. The solicitation is tentatively scheduled for release on November 23, 2026, and may involve a reverse auction conducted via the Procurex system. Proposals must be submitted directly to the bid custodian, as electronic submissions through DIBBS are unacceptable. While the solicitation documents will be available for download via the DIBBS homepage, no paper copies will be provided.

Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

about 17 hours ago

DEADLINE

6150-01-657-2104; YJN; VIRGINIA CLASS SUBMARINE

Solicitation # SPE4A627R0075

Other Electronic Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

PARTS KIT,VALVE,OVERHAUL; NSN: 1660-00-442-2007, PR: 7017536534, P/N: 9776122-10, WSDC: Z9N, AIRCRAFT, FA-18, A-D, E/F, G (GROWLER)

Solicitation # SPE4A727R0079

This procurement request from DLA Aviation is for 742 valve overhaul parts kits, part number 9776122-10, under NSN 1660-00-442-2007. These components are designated as Critical Safety and Critical Application Items intended for FA-18 aircraft. The solicitation will result in a firm fixed price contract with delivery terms set as FOB Destination and inspection and acceptance occurring at the origin. Approved sources include Lynn Electronics LLC, the United States Department of the Air Force, System Technical Support Corporation, and Conquest Machine, Inc. Any other manufacturers wishing to bid must submit a complete source approval package. This is a total small business set-aside opportunity with a response deadline of December 21, 2026. Award decisions will be based on a combination of price, past performance via the Supplier Performance Risk System, and other evaluation factors.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in about 2 months

Sources Sought F108 COI NSN 2915-016838300 / NSN 5310-017389802

Solicitation # SPE4AX27RF108ADDS1

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS