Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Finishing and Coating for Critical Shafts

Active

Federal

Response Deadline10/05/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Precision Finishing and Coating for Critical Shafts, involves providing specialized surface and heat treatments for prime contractors under DLA supply contracts. The scope of work includes applying protective coatings and surface finishes according to C5B configurations, as well as performing heat treatments to ensure critical application components meet specific hardness and strength requirements using precision plating and furnace equipment. The project is managed by the Department of Defense under the Land Supplier Opns Vehicle Spt agency, with performance taking place at Hill AFB. The contract falls under NAICS code 332813 and requires the delivery of finished and coated shafts. The response deadline for this opportunity is October 5, 2026.

General Info

Subcontract for specialized surface and heat treatments for critical shafts at Hill AFB.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L3-26-T-283K.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SHAFT, SHOULDERED

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 24

subcontract

Response DeadlineOct 5

Submission deadline

Response Deadline

10/05/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs final surface treatments and heat treatment for prime contractors on DLA supply contracts. Applies protective coatings and surface finishes per the C5B configuration and performs heat treatment to meet hardness and strength specifications for critical application components using precision plating and furnace equipment. Delivers finished and coated shafts.

Similar Contracts

Same NAICS industry code

Phosphate Coating Services for Mortar Mount LegsThis subcontract opportunity is for the provision of specialized phosphate coating services for mortar mount legs to support prime contractors delivering to the Department of Defense Land Supply Chain. The selected provider will utilize industrial plating tanks and chemical processing equipment to apply coatings in accordance with military specifications to ensure essential corrosion and wear protection for the metal surfaces. The project is designated as a Total Small Business Set-Aside under NAICS code 332813 and will be performed in New Cumberland. Interested parties must respond by October 5, 2026, to be considered for this requirement.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Cadmium Plating for Carbon Steel HardwareThis subcontract involves providing cadmium plating services for carbon steel hardware to support prime contractors on DLA Land and Maritime fluid handling projects. The scope of work includes the surface preparation of carbon steel adapters and the application of cadmium plating using industrial tanks and chemical processing equipment to ensure all components meet government corrosion resistance specifications. The project is managed by the Department of Defense Fluid Handling Division and will be performed at Tinker AFB. Interested parties must respond by October 5, 2026, for this requirement categorized under NAICS code 332813.

FLUID HANDLING DIVISION

POSTED

DEADLINE

NADCAP Certified Phosphate Coating ServicesThis subcontract for NADCAP Certified Phosphate Coating Services supports the Department of Defense Fluid Handling Division by providing specialized corrosion resistance for metal components used in DLA Land and Maritime projects. The contractor is responsible for applying phosphate coatings using industrial plating tanks and chemical processing equipment to meet strict military-grade standards. A critical requirement for this engagement is the maintenance of NADCAP Certification for all phosphate procedures to ensure quality and compliance. The work will be performed in Texarkana, Texas, under NAICS code 332813. Interested parties must respond by October 5, 2026, to the solicitation posted on September 24, 2026. The final deliverable consists of phosphate-coated metal components that are fully prepared for final assembly.

FLUID HANDLING DIVISION

POSTED

DEADLINE

NADCAP Special Process Services (Heat Treat/Plating/NDT)This subcontract opportunity with the Department of Defense involves performing specialized aerospace processes for aircraft panel projects under the ASC Supplier OE and AF Division. The selected provider will execute heat treating, chemical processing, or non-destructive testing using industrial ovens, plating baths, or X-ray and ultrasonic equipment as specified by technical drawings. A critical requirement for this contract is maintaining active NADCAP approval for the specific processes performed, and all delivered components must include a certification of compliance. The project is designated as a Total Small Business Set-Aside under NAICS code 332813 and will be performed at Tinker AFB. Interested parties must submit their responses by October 2, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Coating and Surface TreatmentThis subcontract for Precision Coating and Surface Treatment involves providing specialized surface treatments for critical gun parts, specifically pawl components, for prime contractors under DLA supply contracts. The work is performed for the Department of Defense Land Supply Chain and requires the application of coatings and finishes according to ASTM-B633 and SAE-AMS-QQ-P-416 standards using industrial plating tanks to ensure military-grade durability and corrosion resistance. The performance of this contract takes place in New Cumberland, Pennsylvania, under NAICS code 332813. To be eligible, providers must maintain ISO 9001 certification and be registered with ITAR. The solicitation was posted on September 24, 2026, with a response deadline of October 5, 2026.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Finishing and Coating for Snap HooksThis subcontract involves providing post-casting finishing services for prime contractors on DLA Land and Maritime fluid handling projects. The scope of work includes removing casting flash and burrs and applying protective coatings, such as powder coating or zinc plating, utilizing tumbling machines and plating tanks to deliver finished snap hooks. The project is managed by the Department of Defense Fluid Handling Division and will be performed in San Diego, California. All operations must strictly comply with FAR 52.223-23 and FAR 52.223-3 regulations. The opportunity is categorized under NAICS code 332813.

FLUID HANDLING DIVISION

POSTED

DEADLINE

CARC and High-Temperature Coating Application

LAND SUPPLY CHAIN

POSTED

DEADLINE

Specialized Coating and Finishing ServicesThis subcontract for Specialized Coating and Finishing Services supports the Department of Defense Fluid Handling Division by providing industrial coating and finishing for prime contractors. The scope of work includes surface preparation through degreasing and sandblasting, followed by the application of powder and industrial coatings using specialized spray booths and ovens to ensure all finished racks meet strict military durability standards. All operations must strictly comply with the Hazard Communication Standard under 29 CFR 1910.1200 regarding the handling of hazardous materials. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813 and will be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 5, 2026, following the posting date of September 24, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Surface Treatment and Finishing for Arming BracketsThis subcontract for the Department of Defense, specifically the Land Supplier Operations Vehicle Support agency, involves providing specialized surface treatment and finishing for arming solenoid brackets. The contractor is responsible for applying protective coatings, anodizing, or cadmium plating using industrial plating tanks and chemical baths to ensure all components meet strict MIL-SPEC environmental and durability standards. The final deliverables must be finished brackets ready for assembly and inspection. The project is categorized under NAICS code 332813 and will be performed at Hill AFB in Utah. Interested parties must respond by October 5, 2026, following the posting date of September 24, 2026. This effort supports prime contractors on DLA supply contracts to ensure critical hardware meets military specifications.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Specialized Coating for Critical Gun PartsThis subcontract, issued by the Department of Defense Land Supply Chain, involves the application of specialized protective or functional coatings to cylinder caps for critical gun part projects. The work requires the use of industrial coating equipment for anodizing, plating, or chemical film application in accordance with the technical data package for NSN 1095009553203. The project is set aside for Women-Owned Small Businesses and will be performed at Hill AFB. The contractor is responsible for delivering 769 coated cylinder caps and one assembled coating exhibit for First Article Testing. Strict adherence to security and regulatory standards is mandatory, specifically requiring CMMC Level 2 and DFARS 252.204-7012 compliance. The response deadline for this opportunity is October 5, 2026.

LAND SUPPLY CHAIN

POSTED

DEADLINE

CLEANING SOLVENT, GE

Solicitation # SPE8E5-26-T-4461

Solicitation SPE8E5-26-T-4461 is a Request for Quotations issued by the Defense Logistics Agency Troop Support for the procurement of one box of cleaning solvent, GE, identified by NSN 7930-01-367-0995. The item is classified as a Type I Code H product with a non-extendable shelf life of 12 months. Delivery is required within five days after receipt of the order, with an original required delivery date of September 28, 2026. The shipment is destined for the 309 AMARG MXDSPS at Davis Monthan AFB, Arizona, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements via the DLA Master List and specifies packaging and marking in accordance with MIL-STD-2073-1E and MIL-STD-129. Because the item is hazardous, the contractor must comply with IP025 and the Hazard Communication Standard for labeling and shipping. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment. Offerors must comply with the Buy American Act, the Berry Amendment, and various DFARS regulations regarding domestic sourcing and cybersecurity. Quotes must be submitted via the DIBBS system by October 5, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Aerospace Special Process Finishing (Peening/Surface Treatment)This subcontract for the Department of Defense and DLA Aviation at Oklahoma City involves providing specialized surface treatments and finishing for nickel alloy shroud segments used in Air Force propulsion projects. The scope of work includes executing automated, flapper, or manual peening, laser part marking, and spark erosion grinding to deliver components ready for final inspection. Eligible providers must hold Significant Industrial Process certifications and maintain quality systems compliant with AS9100 or ISO 9001. The opportunity is categorized under NAICS code 332813, with a response deadline set for October 26, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

Supply of Critical Application Gaskets (NSN 5330-01-583-1332)This subcontract involves the manufacture and supply of 102 critical application gaskets, identified by NSN 5330-01-583-1332, for prime contractors supporting the Department of Defense. Production must adhere to TDP Rev A Gen 1 and Basic Drawing NR 16236 RE-015831332, requiring the use of precision cutting and molding equipment. All units must be delivered to DLA Distribution San Joaquin in Tracy, California. Compliance with MIL-STD-129 for marking and RP001 and IP025 for packaging is mandatory, including the application of Special Marking Code 32 to indicate shelf life. The contract falls under NAICS code 332722 and is managed by the Land Supplier Opns Vehicle Spt agency.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Wiper Seal (NSN 5330-01-140-4968)This subcontract involves the procurement or manufacture of one wiper seal, specifically matching Indal Technologies part number 1145-165-1, for prime contractors supporting DLA Land and Maritime supply contracts. The item must be asbestos-free in accordance with FED-STD-313 and requires a government-acceptable inspection system as mandated by FAR 52.246-2. The deliverable must be packaged in medium-duty, waterproof, and UV-resistant containers following MIL-STD-2073-IE and MIL-STD-129 standards. This requirement is issued by the Department of Defense under the Land Supplier Opns Vehicle Spt agency, with performance located in FPO 96662. The response deadline for this opportunity is October 2, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of HARNESS, W25 (NSN 1005-01-566-1831)This subcontract involves the procurement of 100 units of HARNESS, W25 (NSN 1005-01-566-1831) for the Department of Defense under the Land Supplier Operations Vehicle Support agency. The selected provider must manufacture or source the harnesses according to strict technical specifications and adhere to specific military standards for packaging, marking, and palletization, specifically MIL-STD-2073-1E, MIL-STD-129, and RP001. The contract requires the provider to maintain CMMC Level 2 self-assessment and ensure full CDI cybersecurity compliance. Performance will take place in New Cumberland, Pennsylvania, with the final deliverable being 100 properly packaged and marked harnesses. The response deadline for this opportunity is October 5, 2026.

Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

Military-Grade Packaging and Shipping ServicesThis subcontract for Military-Grade Packaging and Shipping Services involves providing specialized packaging, marking, and palletization for prime contractors on DLA Land and Maritime hardware contracts. The service provider must ensure all work adheres to strict military standards, including MIL-STD-2073-I and MIL-DTL-117 for packaging, MIL-STD-129 for marking, and RP001 for palletization. Additionally, hazardous materials must be handled according to IP025 using specific waterproof, greaseproof, and opaque bags. The final deliverable is a fully compliant, palletized shipment delivered to Fort Hood, Texas. This opportunity is associated with the Department of Defense under the Land Supplier Opns Vehicle Spt agency and falls under NAICS code 488510. The response deadline for this requirement is October 2, 2026.

Freight Transportation Arrangement

POSTED

about 8 hours ago

DEADLINE

Supply of Gasket (NSN 5330-01-516-1551)This subcontract involves the manufacture and supply of one gasket, identified by NSN 5330-01-516-1551, for prime contractors supporting DLA Land and Maritime supply contracts. The item must be asbestos-free in accordance with FED-STD-313 and compliant with ARPA Support Services part number 101022230600. Packaging must utilize waterproof, greaseproof, opaque bags meeting MIL-DTL-117, Type II, Class C, Style 1 specifications, and all items must adhere to MIL-STD-130N marking requirements. The contract is managed by the Department of Defense under the Land Supplier Opns Vehicle Spt agency, with a NAICS code of 326220. The final product must be delivered to Fort Hood, Texas. Interested parties must respond by the deadline of October 2, 2026.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7L3-26-Q-1376

Solicitation SPE7L3-26-Q-1376 is a Request for Quotations issued by the Department of Defense, DLA Land and Maritime, for the procurement of one gasket, identified by National Stock Number 5330-01-516-1551. This is a Firm Fixed Price acquisition with a required delivery date of 30 days after receipt of order. The item is to be delivered FOB Origin to a maintenance facility at Fort Hood, Texas. Award will be based on the best value to the government, evaluating price, past performance, and offered delivery. The contract mandates strict adherence to technical and quality standards, including the DLA Master List of Technical and Quality Requirements and MIL-STD-130N for identification marking. Specific packaging requirements include compliance with MIL-STD-2073-1E and RP001, with a requirement that the item be sealed in a medium duty, waterproof, greaseproof, opaque bag per MIL-DTL-117 to prevent deterioration from ultraviolet rays. Additionally, the item must be free of asbestos as defined in FED-STD-313 and include special marking code 32 for shelf life. Inspection and acceptance will occur at the destination, and all payments must be processed electronically through the Wide Area WorkFlow system.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7L3-26-Q-1377

Solicitation SPE7L3-26-Q-1377 is a firm fixed price request for quotation issued by DLA Land and Maritime for one wiper seal, identified as NSN 5330-01-140-4968 and manufacturer part number 1145-165-1 from Indal Technologies Inc. This item is designated as a critical application item and must be free of asbestos. The delivery requirement is 30 days after receipt of order, with the shipment designated as an RDD 999/NMCS priority, requiring the fastest traceable means of transport to the USS Cape St George CG 71. The contract mandates strict packaging and marking standards to prevent ultraviolet ray deterioration, requiring the item to be sealed in a medium duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1. General packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while palletization must follow RP001. Inspection and acceptance are set for destination; however, any offeror proposing origin inspection will face a price evaluation penalty of 2,500 dollars. Award will be based on best value, evaluating price, past performance, and offered delivery. Invoicing must be processed through the Wide Area WorkFlow system.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7L3-26-Q-1375

Solicitation SPE7L3-26-Q-1375 is a firm fixed price request for the procurement of 102 gaskets, identified by NSN 5330-01-583-1332. This item is designated as a critical application item and must be manufactured according to TDP Rev A Gen 1, basic drawing NR 16236 RE-015831332. The required delivery timeline is 90 days after the date of award, with shipping destined for DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality standards, including MIL-STD-130N for identification marking and MIL-STD-129 for general marking, specifically utilizing special marking code 32 for shelf life. Packaging must comply with RP001 and MIL-DTL-117, requiring the items to be sealed in medium duty, waterproof, greaseproof, opaque bags to prevent deterioration from ultraviolet rays. Award will be based on the best value to the government, with evaluation factors including price, past performance, and offered delivery. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7L3-27-Q-0007

Solicitation SPE7L3-27-Q-0007 is a request for quotation issued by DLA Land and Maritime for the procurement of 100 units of HARNESS, W25, identified by NSN 1005-01-566-1831. This total small business set-aside under NAICS 332994 requires quotes to be submitted via DIBBS by October 5, 2026. The award will be based on best value, evaluating past performance, price, and the offered delivery schedule. The required delivery date is 623 days after the order is placed, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Special requirements include a CMMC Level 2 self-assessment, compliance with covered defense information protocols, and specific demilitarization procedures for small arms weapons and accessories. Invoicing must be processed electronically through the Wide Area WorkFlow system. Offerors are requested to provide specific price breaks for quantities ranging from 101 to 150 units.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of RIX Industries Part A8–20141This subcontract involves the supply of one unit of RIX Industries part number A8-20141, identified by NSN 3040-01-707-1204, for prime contractors under Defense Logistics Agency supply contracts. The selected provider must manufacture or source the hardware component according to specific technical specifications, ensuring compliance with DLA RA001 quality requirements and NAVSEA 5100-003D mercury restrictions. The contract requires strict adherence to MIL-STD-2073-1E, RP001, and MIL-STD-129 for all packaging and marking procedures. This opportunity is managed by the Department of Defense under the Land Supplier Opns Vehicle Spt agency, with performance located in New Cumberland, Pennsylvania. The response deadline for this requirement is October 5, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

DLA Compliant Packaging and PreparationThis subcontract for the Department of Defense, specifically the Land Supplier Opns Vehicle Spt, involves specialized packaging and labeling services for prime contractors delivering DLA supply contracts. The scope of work requires the packaging of nine units of NSN 2590015681259 in strict accordance with RP001 DLA Packaging Requirements for Procurement. To ensure compliance, the provider must utilize military-grade materials, including MIL-STD containers and moisture barriers, for hardware delivered via Government-Arranged Transportation under the FDT program. The project is categorized under NAICS code 488410 and will be performed in New Cumberland, Pennsylvania. The solicitation was posted on September 24, 2026, with a response deadline of October 5, 2026. The primary objective is the delivery of fully packaged and labeled hardware that meets all government procurement standards.

Motor Vehicle Towing

POSTED

DEADLINE

Supply of Vehicular Component Brackets (NSN 2590015681259)This subcontract involves the manufacture or sourcing of nine vehicular component brackets, identified by NSN 2590015681259, for prime contractors supporting the Department of Defense Land Supplier Operations Vehicle Support agency. The supplier must ensure all parts are produced in compliance with DLA Master List requirement RA001 and adhere to strict quality control and inspection standards. To be eligible, the provider must possess a valid CAGE code and UEI. The performance of this contract will take place in New Cumberland, Pennsylvania, under NAICS code 332312. The response deadline for this opportunity is October 5, 2026.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS