Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Precision Finishing and Coating for Valve Components

Open

Federal

Response Deadline11/20/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Precision Finishing and Coating for Valve Components, involves providing specialized surface treatments, plating, and coatings for machined valve components. Working under the Department of Defense through DLA DIST San Joaquin, the contractor is responsible for applying treatments according to TDP specifications using industrial plating and chemical baths. A critical requirement of the performance is the strict prohibition of mercury and Class I ozone-depleting chemicals during the process. The work is to be performed in Tracy, California, under NAICS code 332813. Interested parties must respond by November 20, 2026, to provide the finished, coated metallic components required for prime contractors on DLA supply contracts.

General Info

Subcontract for specialized valve component coating and plating for DoD in Tracy, California.

Agency

Department Of Defense → DLA DIST SAN JOAQUIN

NAICS

332813 - Electroplating, Plating, Polishing, Anodizing, and Coloring

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7MC-27-T-1953.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

STEM, FLUID VALVE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 9

subcontract

Response DeadlineNov 20

Submission deadline

Response Deadline

11/20/2026, 09:00:00 AM PSTin 9 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs surface treatments, plating, or coatings on machined valve components for prime contractors on DLA supply contracts. Applies treatments per TDP specifications while ensuring zero use of Class I ozone-depleting chemicals or mercury. Utilizes industrial plating and chemical treatment baths. Delivers finished, coated metallic components.

Similar Contracts

Same NAICS industry code

CAD Plating Services for Steel HardwareThis subcontract involves providing specialized CAD plating services for steel hardware to support prime contractors on DLA Weapons Support ASC projects. The scope of work includes surface preparation, cleaning, and the application of clear anodic or chemical plating to steel stepped studs to ensure necessary corrosion resistance. The contractor must utilize appropriate chemical plating baths and curing equipment while strictly adhering to prohibitions regarding hexavalent chromium and maintaining compliance with RQ006 quality conformance standards. The project requires the delivery of four CAD-plated stepped steel studs under NAICS code 332813. This requirement is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division. Interested parties should note the response deadline of November 17, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

Phosphate Coating and Surface TreatmentThis subcontract involves providing specialized phosphate coating and surface treatment services for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected provider is responsible for the surface preparation and application of phosphate coatings for 54 mounting plates, ensuring all work adheres to the DLA Master List of Technical and Quality Requirements. To qualify, the contractor must possess specific phosphate coating certifications and maintain the necessary treatment tanks. Additionally, strict compliance with prohibitions regarding ozone-depleting chemicals is required. The performance of this contract will take place in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing supports the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Division. The project involves performing specialized surface treatments and coatings on aircraft structural components to ensure essential corrosion resistance. All work must be executed in strict accordance with reference drawings BAC5300 and BAC5307, with final delivery consisting of finished plates featuring aerospace-grade treatments. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813, with performance taking place at Tinker AFB. To be eligible, contractors must maintain NADCAP accreditation and ISO 9001:2015 certification. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

Precision Plating and Surface TreatmentThis subcontract for Precision Plating and Surface Treatment supports the DLA Weapons Support Land Supply Chain through the delivery of surface-treated Feed Trays. The selected provider will perform plating and surface treatments in accordance with ASTM-B633 and TDP specifications, with a strict requirement that no Class I Ozone Depleting Chemicals are used during the process. Performance of the work will take place in New Cumberland. To be eligible, contractors must maintain ITAR and EAR registrations and achieve CMMC Level 2 certification to ensure the secure handling of technical data. The solicitation was posted on November 10, 2026, with a response deadline of November 20, 2026. This opportunity falls under NAICS code 332813 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

NADCAP Approved Special Process FinishingThis subcontract, titled NADCAP Approved Special Process Finishing, involves performing specialized processing for prime contractors on DLA Weapons Support ASC projects. The scope of work includes heat treating, plating, anodizing, or non-destructive testing on aircraft channels in accordance with Drawing 20145214. All processed components must be delivered with the required certifications of compliance. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Tinker AFB. To be eligible, contractors must hold NADCAP approval for the specific process being performed and obtain ITAR/EAR data access approval. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

Aerospace Component Finishing and Plating

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

Aerospace Component Finishing and CoatingThis subcontract for Aerospace Component Finishing and Coating supports the DLA Weapons Support Maritime Supply Chain by providing specialized surface treatments and coatings for prime contractors. The selected provider must apply finishes in strict accordance with TDP Rev A Gen 2 and associated reference drawings, ensuring that all coatings maintain critical tolerances and preserve the integrity of IUID markings. The contractor is required to hold ISO 9001:2015 certification and must manage all hazardous materials according to 29 CFR 1910.1200(g) regulations. Performance will take place in Tracy, California, with the primary objective being the delivery of finished components that meet all specified Department of Defense standards.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

Phosphate Coating Services for Critical Gun PartsThis subcontract involves providing specialized phosphate coating services for critical gun parts on behalf of prime contractors delivering to the DLA Weapons Support ASC Commodities Division. The contractor is responsible for applying coatings to pins in strict accordance with MIL-DTL-16232 using approved written procedures to ensure all thickness and adherence specifications are met. The performance of this contract requires facility approval by the PCO to allow for DCMA in-process inspections and the submission of recent Government First Article or PVT test reports. Work will be performed in New Cumberland, Pennsylvania, under NAICS code 332813.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

Hot-Dip Zinc Coating ServicesThis subcontract for the Department of Defense involves providing hot-dip zinc coating services for prime contractors at the DDSP New Cumberland Facility. The scope of work requires the application of industrial galvanizing to 892 feet of extruded structural steel angles to ensure long-term corrosion prevention. All coating processes and final finishes must strictly adhere to ASTM A123 standards. The successful contractor is responsible for delivering the treated structural steel angles along with a formal certification of compliance.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 13 hours ago

DEADLINE

Industrial Coating and Finishing ServicesThis subcontract for Industrial Coating and Finishing Services involves providing surface treatment and protective coatings for metal assemblies to support prime contractors on DLA supply contracts. The scope of work focuses on the delivery of finished metal components while maintaining strict adherence to regulatory standards, specifically the prohibition of Hexavalent Chromium per DFARS 252.223-7008 and the hazardous material identification requirements of FAR 52.223-3. Managed under the Department of Defense through the Red River Receiving Building, the project falls under NAICS code 332813. The performance of these services is centered in the 75507-5000 zip code area. Interested parties should note the response deadline of November 17, 2026.

RED RIVER RECEIVING BLDG

POSTED

about 13 hours ago

DEADLINE

Aerospace Special Process ServicesThis subcontract for Aerospace Special Process Services involves performing NADCAP-certified special processes for prime contractors supporting DLA Weapons Support ASC aircraft component projects. The scope of work includes executing plating, anodizing, or heat treating as specified in drawing EI-014768257, with all deliverables requiring certifications of conformance. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division, with performance taking place at Tinker AFB. Strict adherence to aerospace quality standards and ITAR/EAR export controls is mandatory. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

Specialized Phosphate Coating ServicesThis subcontract for Specialized Phosphate Coating Services supports the DLA Weapons Support Land Supply Chain by providing phosphate coating for prime contractors. The scope of work involves applying coatings to metal components in strict accordance with MIL-STD-171, MIL-DTL-16232, and TT-C-490 Types I, II, and V to ensure all deliverables meet rigorous military specifications. To qualify for this engagement, providers must hold NADCAP certification for phosphate chemical processes as issued by the Performance Review Institute. The work is associated with NAICS code 332813 and is designated for performance in Tracy, California. Interested parties must respond by November 20, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

Supply of Specialized Air Conditioner Units (NSN 4120-01-690-8526)This subcontract, issued by the Department of Defense for DLA DIST SAN JOAQUIN, requires the procurement or manufacture of seven specialized air conditioner units. The units must match NSN 4120-01-690-8526 and Engineered Coil Company part numbers 1621-0000 and 1621-0000-2. All deliverables must adhere to strict packaging and marking standards, specifically ASTM D3951 for packaging, RP001 for palletization, and MIL-STD-129 for marking. The contract is designated as a Total Small Business Set-Aside under NAICS code 333415 and requires full compliance with the Buy American Act. Performance will take place in Tracy, California. Interested parties must submit their responses by November 20, 2026.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Supply of High-Strength Industrial WebbingThis subcontract involves the supply of high-strength industrial webbing and strapping material for prime contractors supporting DLA Distribution San Joaquin projects in Tracy, California. The scope of work requires the weaving of high-tenacity polyester, nylon, or aramid fibers using industrial looms to ensure compliance with NSN 4240-01-544-3384 standards for tensile strength and abrasion resistance. Available products include UV-resistant or flame-retardant textiles delivered as either spools or pre-cut lengths of safety webbing. The contract falls under NAICS code 313310 and mandates strict adherence to the Buy American Act. Interested parties must note the response deadline of November 20, 2026, for this Department of Defense requirement.

Textile and Fabric Finishing Mills

POSTED

about 13 hours ago

DEADLINE

Supply of Industrial Safety Hardware (Carabiners/D-Rings/Hooks)This subcontract involves the supply of industrial safety hardware, specifically snap hooks, D-rings, and carabiners, for prime contractors supporting DLA Distribution San Joaquin projects in Tracy. The scope of work requires the manufacture of high-strength connectors using steel or aluminum alloys treated with corrosion-resistant coatings. To ensure safety and quality, the provider must deliver bulk safety-rated components accompanied by Mill Test Reports for load-bearing specifications. The contract mandates strict adherence to the Buy American Act and requires that all supplied hardware be mercury-free. Managed under NAICS code 332510 for the Department of Defense, the procurement process began on November 10, 2026, with a response deadline set for November 20, 2026.

Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

Industrial Safety Lanyard Fabrication (NSN 4240-01-544-3384)This subcontract involves the full assembly and manufacturing of 286 industrial safety lanyards for prime contractors supporting DLA Distribution San Joaquin projects in Tracy, California. The fabrication process must strictly adhere to NSN 4240-01-544-3384 and the DLA Master List of Technical and Quality Requirements, utilizing specialized industrial sewing and crimping equipment for safety-rated webbing. Compliance is mandatory regarding NIST SP 800-171 cybersecurity standards and RA001 quality protocols. Final deliverables must be packaged in accordance with MIL-STD-2073-1E. The opportunity is categorized under NAICS code 812332, with a response deadline of November 20, 2026.

Industrial Launderers

POSTED

about 13 hours ago

DEADLINE

Supply of Non-Immersion Electrical Heating ElementsThis subcontract involves the supply of eight non-immersion type electrical heating elements to prime contractors supporting DLA supply contracts. The items must be manufactured or sourced in strict accordance with NSN 4520-01-303-1172 and the DLA Master List of Technical and Quality Requirements. All deliverables must be packaged and marked according to MIL-STD-129 and MIL-STD-2073-1E standards. Managed by the Department of Defense through DLA DIST San Joaquin, the contract requires full compliance with DFARS 252.204-7012 and 252.204-7018 cybersecurity standards. The place of performance is located in Tracy, California. The solicitation was posted on November 10, 2026, with a response deadline of November 20, 2026, under NAICS code 333414.

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 13 hours ago

DEADLINE

Aluminum Alloy Sheet Supplier (NSN 9535-00-232-7567)This subcontract opportunity, managed by the DLA DIST SAN JOAQUIN for the Department of Defense, seeks a supplier for aluminum alloy metal sheets under NSN 9535-00-232-7567. The required materials must be 0.040 inches thick, 60 inches wide, and 120 inches long, strictly conforming to SAE AMS4025P, ASTM B660, and ASTM B666 standards. Eligible suppliers must maintain a QSLD listing for FSGs 95 and 96 and provide Mill-Material Certifications upon delivery of two sheets. Performance will take place in Tracy, California, with all packaging adhering to MIL-STD-2073-1E and MIL-STD-129 specifications. The solicitation was posted on November 10, 2026, with a response deadline of November 20, 2026. This requirement falls under NAICS code 331521 and is intended for prime contractors delivering on DLA supply contracts.

Aluminum Die-Casting Foundries

POSTED

about 13 hours ago

DEADLINE

Specialized Aluminum Alloy Sheet SupplierThis subcontract, issued by the Department of Defense through DLA DIST SAN JOAQUIN, seeks a supplier for 86 aluminum alloy metal sheets to support prime contractors. The required materials are H-32 strain hardened and stabilized to 1/4 hard aluminum, measuring 0.125 inches by 48 inches by 96 inches. The supplier must provide Mill-Material Certifications and ensure all sheets feature continuous identification markings via stenciling or stamping. The contract is a total small business set-aside under NAICS code 331521, with performance taking place in Tracy, California. Compliance with MIL-STD-2073-1E and MIL-STD-129 is mandatory, and the supplier must maintain a QSLD listing. Interested parties must respond by November 20, 2026.

Aluminum Die-Casting Foundries

POSTED

about 13 hours ago

DEADLINE

Supplier of Flexible Duct (NSN 4120016645641)This subcontract involves the manufacture or sourcing of 22 units of flexible ducting for prime contractors supporting DLA Distribution San Joaquin. The supplied units must strictly adhere to NSN 4120016645641 and RA001 technical requirements, with performance taking place in Tracy, California. The contractor is required to maintain full compliance with the Buy American Act and the Berry Amendment. Additionally, all shipments must be packaged according to ASTM D3951 and marked in accordance with MIL-STD-129 and RP001 standards. Delivery of the 22 units is designated as FOB Origin.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Supplier of Motorola Lithium-Ion Storage BatteriesThis subcontract involves the supply of 45 Motorola Solutions lithium-ion storage batteries, part number BTRY-MC55EAB00, for prime contractors supporting DLA Distribution San Joaquin projects. The batteries must be delivered FOB Destination to Tracy, California, and must adhere to strict quality and packaging standards, including compliance with MIL-STD-129, MIL-STD-2073-1E, and DFARS 252.225-7001. A critical requirement of the agreement is the verification of a non-extendable Type I shelf life of 36 months, with a guarantee that at least 85 percent of this shelf life remains upon delivery. The procurement falls under NAICS code 423850 and is managed by the Department of Defense.

Service Establishment Equipment and Supplies Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE8E8-27-T-0505

Solicitation SPE8E8-27-T-0505 is a federal procurement issued by DLA Distribution San Joaquin for the acquisition of 22 units of flexible duct, identified by NSN 4120016645641. The contract is established under the First Destination Transportation program to utilize Government-Arranged Transportation, with shipping terms set as FOB Origin. Delivery is required within 125 days, with a need ship date of March 26, 2027, and a required delivery date of May 2, 2027. Inspection and acceptance will occur at the destination, governed by FAR 52.246-1 and 52.246-2. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 for general packaging, MIL-STD-129 for labeling, and RP001 for palletization. Hazardous materials must be labeled according to the Hazard Communication Standard 29 CFR 1910.1200. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment requests. The solicitation incorporates several FAR clauses, including those regarding sustainable products, employment eligibility, and combating trafficking in persons, and requires compliance with the Buy American Act and the Berry Amendment.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

DRY CHEMICAL, FIRE EXTI

Solicitation # SPE8E6-27-T-0425

Solicitation SPE8E6-27-T-0425 is a fixed-price request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of 20 dry chemical fire extinguishers, identified by NSN 4210-01-625-6364. The requirement specifies a need ship date of November 26, 2026, with an original required delivery date of January 26, 2027. Supplies are to be delivered to DLA Distribution San Joaquin in Tracy, California. While the request form mentions FOB Destination, the solicitation text clarifies that offers should be submitted based on FOB Origin under the First Destination Transportation program. Inspection and acceptance will occur at the destination per FAR 52.246-1. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and RP001, with DLA Master List technical and quality requirements taking precedence over ASTM D3951. If materials are deemed hazardous under FED-STD-313, they must be packaged according to TQ requirement IP025 and labeled per the Hazard Communication Standard. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with the Buy American Act and Berry Amendment. Cybersecurity protections are enforced through DFARS 252.204-7012 and 252.204-7009. All quotations must be submitted via the DIBBS portal by November 9, 2026.

Broadwoven Fabric Mills

POSTED

about 13 hours ago

DEADLINE

PITCH, PINE TAR

Solicitation # SPE8ES-27-T-0155

Solicitation SPE8ES-27-T-0155 is a request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of Pine Tar Pitch, NSN 8030002751176. The requirement is for four cans, with each unit consisting of 35 pounds packaged in 5 gallon pails. This item is classified as a Type I Code M item with a non-extendable shelf life of 24 months. Delivery is required within 46 days after order to DLA Distribution San Joaquin in Tracy, California, with FOB Destination terms. Inspection and acceptance will also occur at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, which must include the lot or batch number and conspicuous storage temperature requirements. Because the material is hazardous, the supplier must provide Safety Data Sheets and Hazardous Communication Standard labels in accordance with 29 C.F.R. 1910.1200 and Federal Standard No. 313-E for review and approval prior to award. Compliance with the Buy American and Balance of Payments Program is required for quotes above the micro-purchase threshold. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

Cyclic Crude, Intermediate, and Gum and Wood Chemical Manufacturing

POSTED

about 13 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Specialized Finishing and Coating

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Phosphate Coating Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Aerospace Surface Treatment and Finishing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Zinc Coating and Finishing Services

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Aerospace and Defense Component Finishing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Passivation and Solid Film Lubrication Services

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

CARC and Phosphate Coating Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Thermal Spray or Specialized Coating Services

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Specialized Surface Treatment and Finishing

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Phosphate Coating Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Zinc Coating and Finishing for Critical Fasteners

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Aerospace Component Finishing and Coating

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS