Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Hardware Manufacturing – Washer (NSN 5310011246196, P/N 1C6477P33)

Active

Federal

Response Deadline08/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Department of Defense Aviation Supply Chain involves the manufacture and supply of precision metal washers, specifically identified by NSN 5310011246196 and Part Number 1C6477P33. The scope of work encompasses the entire production lifecycle, including material sourcing, stamping or machining, rigorous quality control, and packaging that meets military specifications. The project falls under NAICS code 332722. Interested parties must note the tight turnaround for responses, with the solicitation posted on August 26, 2026, and a response deadline of August 28, 2026.

General Info

DoD subcontract for manufacturing precision metal washers NSN 5310011246196 by August 28, 2026.

Agency

Department Of Defense → AVIATION SUPPLY CHAINView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A1-26-T-2617.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

WASHER

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 26

subcontract

Response DeadlineAug 28

Submission deadline

Response Deadline

08/28/2026, 05:00:00 PM UTCin 1 day

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → AVIATION SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of a precision metal washer to military specifications, including material sourcing, stamping or machining, quality control, and compliant packaging.

Similar Contracts

Same NAICS industry code

Precision Fastener Manufacturing (Critical Application Item)This subcontract under the Department of Defense ASC Commodities Division involves the precision manufacture of self-locking nuts with assembled washers, identified as part number MS21224-6. The items are designated as critical application components and must strictly adhere to military specifications, specifically requiring Class 3B threading and full material compliance. Source inspection is a mandatory requirement to ensure quality and technical standards are met. The opportunity was posted on August 26, 2026, with a response deadline of September 3, 2026. It falls under NAICS code 332722 for bolted threaded fastener manufacturing. Interested parties can find further details and submission guidelines through the provided DIBBS link.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

Supply of Nonmetallic Seals (NSN: 5330015769565)This subcontract involves the manufacture and delivery of 61 nonmetallic seals under NSN 5330015769565 for the Department of Defense, specifically the LSO Combat Vehicles and Armament agency. The items must be compliant with all military packaging and marking standards and are to be delivered FOB Origin to DLA depots. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332722. Interested parties must respond by August 28, 2026, following the posting date of August 26, 2026.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 14 hours ago

DEADLINE

Supply of Flat Washers under NSN 5310013774386This subcontract, issued by the Department of Defense through the ASC Commodities Division, requires the supply of 100 flat washers that meet military specifications under NSN 5310-01-377-4386. The items must be compliant with DLA packaging standards and delivered within 20 days of the order. The procurement falls under NAICS code 332722. Interested parties must submit their responses by the deadline of September 3, 2026, following the posting date of August 26, 2026.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

Rod End Connector SupplyThis subcontract involves the supply of one NSN-compliant Rod End Connector, identified by NSN 5340016176960, for the Department of Defense under the Land Supply Chain agency. The supplier must ensure the component meets all DLA technical, quality, and labeling standards required for federal delivery. The procurement is categorized under NAICS code 332722, with the place of performance located at Aberdeen Proving Ground. Interested parties must submit their responses by the deadline of September 8, 2026, following the posting date of August 26, 2026.

LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

Precision Machining of Close Tolerance ScrewsThe Department of Defense, through the ASC Commodities Division, is seeking a subcontractor for the precision machining of close tolerance screws. The scope of work includes CNC machining, threading, heat treating, and finishing processes to ensure all components meet strict military or industrial specifications. This subcontract opportunity is categorized under NAICS code 332722. Interested parties must submit their responses by September 3, 2026, following the posting date of August 26, 2026.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

Precision Machine Screw Manufacturing for Critical ApplicationThis subcontract with the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, involves the manufacture and delivery of critical application machine screw assemblies under part number ABS20642-4F14. The project falls under NAICS code 332722 and mandates strict adherence to military specifications regarding quality control, detailed inspection, and full traceability. The solicitation was posted on August 26, 2026, with a response deadline of September 9, 2026. Interested parties must ensure all technical requirements for these critical components are met to comply with the agency's rigorous standards for aerospace and air force divisions.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

Precision Hardware Manufacturing – Thumb Latch (NSN 5340011797363)This subcontract, issued by the Department of Defense Land Supply Chain, requires the manufacture and delivery of 20 precision-engineered thumb latches under NSN 5340011797363. The contractor is responsible for the entire production lifecycle, including material sourcing, machining, finishing, and rigorous testing to ensure full compliance with military specifications. All deliverables must adhere to MIL-STD packaging requirements to meet defense standards. The opportunity was posted on August 26, 2026, with a response deadline of September 8, 2026. Classified under NAICS code 332722, the contract focuses on high-precision hardware manufacturing. Interested parties can find further details and submission guidelines through the DIBBS portal.

LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

Precision Fastener Manufacturing and Supply for NSN 5306-00-582-6419This subcontract, issued by the Department of Defense ASC Commodities Division, requires the manufacture and delivery of five close tolerance bolts under NSN 5306-00-582-6419. The contractor must ensure all items meet strict military specifications, including full compliance with DLA standards for packaging, marking, and quality assurance. The opportunity falls under NAICS code 332722 and was posted on August 26, 2026. Interested parties must submit their responses by the deadline of September 3, 2026.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

Precision Fastener Manufacturing – Self-Locking Plate NutsThis subcontract through the Department of Defense ASC Commodities Division involves the manufacture and delivery of 45 self-locking plate nuts. The contractor must ensure all units are produced according to strict military specifications, adhering to the provided technical data package, reference drawings, and established quality standards. The project falls under NAICS code 332722 and is to be performed in New Cumberland, Pennsylvania. Interested parties must respond by August 28, 2026, following the solicitation posted on August 26, 2026.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

Manufacturing of Close Tolerance BoltsThis subcontract through the Department of Defense ASC Commodities Division involves the manufacture and supply of 50 close tolerance bolts under NSN 5306-00-582-6419. The contractor must ensure all units meet strict military specifications, including full compliance with DLA quality and marking standards. The opportunity falls under NAICS code 332722 and was posted on August 26, 2026. Interested parties must submit their responses by the deadline of September 3, 2026.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

Precision Screw Assembly ManufacturingThis subcontract involves the manufacture and supply of four units of a precision screw assembly, identified by NSN 5305016205523. The contractor must ensure all units are fully compliant with DLA technical specifications and adhere to strict military packaging standards. The project is managed by the Department of Defense under the Aviation Supply Chain ESOC Buys agency. Interested parties must submit their responses by September 3, 2026, following the solicitation posted on August 26, 2026. The work falls under NAICS code 332722.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 14 hours ago

DEADLINE

Supply of Flat Washers (NSN: 5310011767025)This subcontract through the Department of Defense ASC Commodities Division involves the procurement and delivery of 40 flat washers under National Stock Number 5310011767025. The supplier must ensure all items strictly adhere to military standards for packaging, marking, and documentation. The opportunity was posted on August 26, 2026, with a response deadline of September 3, 2026. Classified under NAICS code 332722, this requirement is managed by the Department of Defense to ensure the supply of critical hardware components.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN

Same awarding agency

Supplier of Raw Materials or Specialty ComponentsThis subcontract opportunity with the Department of Defense Aviation Supply Chain requires a supplier to provide military-grade raw materials or off-the-shelf components specifically for the Ring and Block Assembly. The contractor must ensure all supplied materials include full traceability and proper certification to meet military standards. The procurement is categorized under NAICS code 331492 and will be performed in Tracy, California. Interested parties must submit their responses by August 28, 2026, following the posting date of August 26, 2026.

Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

about 14 hours ago

DEADLINE

Packaging, Marking, and Logistics SupportThis subcontract, issued by the Department of Defense Aviation Supply Chain, requires the packaging, labeling, and preparation of Ring and Block Assemblies for shipment. The contractor must ensure all activities comply with specific military and industry standards, including ASTM D3951, MIL-STD-129, and RP001. The performance of these logistics services will take place in Tracy, California. Interested parties must submit their responses by August 28, 2026, under NAICS code 488490.

Other Support Activities for Road Transportation

POSTED

about 14 hours ago

DEADLINE

Compliance and Cybersecurity Support (CMMC Level 2)The Department of Defense Aviation Supply Chain is seeking a subcontractor to provide advisory and implementation services focused on achieving CMMC Level 2 compliance. The primary objective of this engagement is to ensure the protection of controlled unclassified information within defense supply chain systems. This subcontract opportunity is categorized under NAICS code 541512 and will be performed in Tracy, California. Interested parties must submit their responses by August 28, 2026.

Computer Systems Design Services

POSTED

about 14 hours ago

DEADLINE

Quality Assurance and First Article Testing (FAT) ServicesThe Department of Defense, through the Aviation Supply Chain, is seeking a subcontractor to provide Quality Assurance and First Article Testing services. The primary objective of this contract is to perform First Article Testing to validate that the initial production unit adheres to all design, performance, and military specification requirements. This opportunity is categorized under NAICS code 541380 and will be performed in Tracy, California. Interested parties must submit their responses by August 28, 2026, following the posting date of August 26, 2026.

Testing Laboratories and Services

POSTED

about 14 hours ago

DEADLINE

Precision Machining and Assembly of Ring and Block AssemblyThis subcontract, issued by the Department of Defense Aviation Supply Chain, requires the manufacture and assembly of the Ring and Block Assembly. The project involves precision machining, component integration, and performance validation to ensure all parts meet exact military specifications. The work is designated under NAICS code 332999 and will be performed in Tracy, California. Interested parties must adhere to the response deadline of August 28, 2026, following the posting date of August 26, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

SEAL, NONMETALLIC SP

Solicitation # SPE4A1-26-T-2577

Solicitation SPE4A1-26-T-2577 is a request for quotations issued by DLA Aviation for the procurement of four nonmetallic special shaped section seals, identified by NSN 5330-01-529-6802 and Sikorsky part number 70209-52426-131. The items are designated as critical application items and must be delivered FOB Origin to the Central Receiving and Shipping Point at Fort Rucker, Alabama, with a required delivery date of August 7, 2026. The procurement requires strict adherence to supply chain traceability documentation per DLA Directive C03 and prohibits the use of asbestos. Technical requirements specify a maximum shelf life of 12 months in accordance with ASTM D6576. Due to the potential for deterioration from ultraviolet rays, the seals must be packaged in medium-duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1, and marked according to MIL-STD-129. Inspection and acceptance will occur at the destination. The contractor must utilize the Wide Area WorkFlow (WAWF) system for all payment requests and receiving reports. Quotations are to be submitted electronically via the DLA Internet Bid Board System (DIBBS) by August 21, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE4A1-26-T-2693

This contract is for the procurement of 94 valve seats, identified as commercial items under NSN 4810011846568 and Honeywell part number 3162059-2. The order is managed by the Department of Defense Aviation Supply Chain under solicitation SPE4A1-26-T-2693, with a required delivery date of August 26, 2026, and a delivery timeframe of 221 days. Shipping is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution facility in New Cumberland, Pennsylvania. The item is designated as a critical application item and must adhere to strict quality and sampling standards, including MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow the DLA Packaging Requirements for Procurement. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance. Item Unique Identification is not required for this order.

Industrial Valve Manufacturing

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE4A1-26-T-2617

This solicitation is for the procurement of two washers, part number 1C6477P33, for the GE Co Aircraft Engine Business Group under the Aviation Supply Chain of the Department of Defense. The contract requires delivery within 10 days after the order is placed. The procurement is governed by specific technical and quality requirements, including source approval request documentation, DLA packaging standards, and strict guidelines regarding the removal of government identification from non-accepted supplies. The contract mandates that mercury or mercury-containing compounds must not be intentionally added to the hardware, with limited exceptions for specific functional components. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. All measuring and test equipment must comply with established standards to ensure the hardware meets the necessary technical specifications.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

SPRING, HELICAL, COMP

Solicitation # SPE4A1-26-T-2596

Solicitation SPE4A1-26-T-2596, issued by the DLA Aviation Supply Chain on August 17, 2026, seeks quotations for 65 units of helical compression springs, identified by NSN 5360-00-513-0767 and part number 1325868. The requirement is not a small business set-aside and is open to all qualified offerors. Delivery is required within 171 days after the order, with a need ship date of February 12, 2027, and a final required delivery date of May 13, 2027. The items are to be delivered FOB Origin to Arizona Industries for the Blind in Phoenix, Arizona. The contract mandates strict adherence to DLA packaging and marking requirements, specifically RP001, RQ017, and MIL-STD-129, with packaging to be performed in accordance with ASTM D3951. Quality assurance is governed by destination inspection and acceptance, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Key compliance requirements include a CMMC Level 2 self-assessment, adherence to the Buy American Act and Berry Amendment, and the use of the Wide Area WorkFlow system for electronic invoicing. Offers utilizing additive manufacturing are ineligible for award unless specifically authorized. Quotes must be submitted via the DIBBS portal.

Nonferrous Forging

POSTED

about 14 hours ago

DEADLINE

STUD, TURNLOCK FASTENER

Solicitation # SPE4A1-26-T-2614

This solicitation from the Department of Defense Aviation Supply Chain is for the procurement of 2,456 turnlock fastener studs under National Stock Number 5325-00-859-3781. The contract is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside and falls under NAICS code 332510. Delivery is required within 170 days after the order is received, with the place of performance located in Jacksonville, Florida. The agreement incorporates specific DLA technical and quality requirements, including RP001 for packaging and guidelines for bare item marking and the removal of government identification from non-accepted supplies. The solicitation, numbered SPE4A1-26-T-2614, requires responses by August 28, 2026.

Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE4A1-26-T-2595

Solicitation SPE4A1-26-T-2595 is a Request for Quotations issued by DLA Aviation for the procurement of 671 machine bolts under NSN 5306001802783. The items must be manufactured according to the current revision of the applicable part standard, with specific reference to NASM5 and associated drawings. Delivery is required by February 12, 2027, with an original required delivery date of April 14, 2027, shipped FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict quality and compliance standards, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the origin, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N, while the prohibition of intentionally added mercury is strictly enforced. The procurement also incorporates various DFARS and FAR clauses, including requirements for safeguarding covered defense information and compliance with the Buy American Act and Berry Amendment. Payment and invoicing are to be processed electronically through the Wide Area WorkFlow system.

Nonferrous Forging

POSTED

about 14 hours ago

DEADLINE

BOLT, CLOSE TOLERANCE

Solicitation # SPEA41-26-T-2602

Solicitation SPE4A1-26-T-2602 is a fixed-price request for quotations issued by DLA Aviation for the procurement of 166 close tolerance bolts, identified by NSN 5306011825185. The requirement is designated as a critical application item with a required delivery date of April 14, 2027, and a delivery window of 171 days after the order. The contract is managed under the First Destination Transportation program with shipping, inspection, and acceptance all occurring at the origin, with the final destination being DLA Distribution San Joaquin in Tracy, California. Compliance requirements are stringent, necessitating adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All packaging must be marked per MIL-STD-129 and palletized according to RP001. Quality assurance requires a manufacturer's inspection system complying with SAE AS9003 or ISO 9001, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Additionally, the contract mandates CMMC Level 2 self-assessment, adherence to the Buy American Act and Berry Amendment, and the use of the Wide Area Workflow system for electronic invoicing and receiving reports.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE