Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Precision Light Lens Fabrication (NSN 6210-01-299-2007)

Open

Federal

Response Deadline11/13/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of 188 specialized light lenses under NSN 6210-01-299-2007 for aircraft launch and recovery projects managed by the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating the lenses according to Basic Drawing NR 80020 422915 Revision F, while strictly adhering to NAVAIR traceability protocols and performing all necessary bare item marking. The project demands high precision and strict quality control, requiring the use of specialized marking equipment and a zero non-conformance quality system. Additionally, the contractor must ensure full compliance with NAVSEA 5100-003D mercury containment standards. Performance for this Department of Defense contract will take place in San Diego, California.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

339112 - Surgical and Medical Instrument Manufacturing

Place of Performance

SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-013Y.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

LENS, LIGHT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 09:00:00 AM PSTin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures and supplies specialized light lenses for prime contractors on DLA Weapons Support ASC aircraft launch and recovery projects. Fabricates lenses per Basic Drawing NR 80020 422915 Revision F, implements NAVAIR traceability protocols, and performs bare item marking. Ensures compliance with NAVSEA 5100-003D mercury containment standards. Requires precision marking equipment and zero non-conformance quality systems. Delivers 188 finished light lenses.

Similar Contracts

Same NAICS industry code

Manufacturing of Disposable Electronic Thermometer Probe CoversThis subcontract involves the manufacturing of disposable plastic probe covers for digital thermometers to support prime contractors on Department of Defense DLA Troop Support Medical Supply Chain projects. The scope of work requires the injection molding or forming of medical-grade plastic covers, which must be delivered as finished products in packages of 100 under NSN 6515-01-373-8659. Performance for this contract is based in Flowood, Mississippi. To ensure regulatory compliance for these Class II medical devices, the manufacturer must possess FDA 510(k) Clearance and maintain active FDA Registration and GMP compliance. The opportunity is categorized under NAICS code 339112, with a response deadline set for November 12, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 8 hours ago

DEADLINE

Disposable Ophthalmic Cautery Unit ManufacturingThis subcontract involves the manufacture and supply of disposable, battery-operated, low-temperature ophthalmic cautery units for prime contractors supporting the Department of Defense Medical Supply Chain. The scope of work includes the fabrication of units to precise technical specifications, specifically maintaining tip resistance between 0.34 and 0.49 ohms. Production must take place in cleanroom facilities and encompass the integration of actuators, sterilization, and individual sterile packaging. To ensure medical safety and quality, the provider must adhere to ISO 13485 standards and maintain full compliance with FDA regulations. The contract is categorized under NAICS code 339112 and is managed by the Medical Supply Chain MD Surg FSF. Performance of the contract is designated for APO 09227-0000.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 8 hours ago

DEADLINE

Medical Syringe and Needle SupplierThis subcontract involves the manufacture and delivery of primary medical collection components for prime contractors supporting DLA Troop Support Medical Supply Chain projects. The scope of work specifically requires the production of 3ml syringes and 23G by 1 inch needles integrated with filter tip protective caps, utilizing stainless steel and medical-grade plastics. To qualify, suppliers must maintain FDA medical device manufacturing certifications and ensure full compliance with the Berry Amendment. The contract is managed under the Department of Defense for the Medical Supply Chain and is categorized under NAICS code 339112, with the place of performance designated as FPO 96667.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 8 hours ago

DEADLINE

Sterile ABG Sampling Kit Manufacturer/AssemblerThis subcontract involves the final assembly, kitting, and sterilization of Arterial Blood Gas Sampling Kits for prime contractors supporting Department of Defense DLA Troop Support Medical Supply Chain projects. The scope of work includes prefilling syringes with vapor dry heparin and integrating needles and ancillary supplies within a cleanroom environment. Finished units must be sterilized using Gamma or EO methods and packaged in accordance with ASTM D3951 and MIL-STD-129 standards. The provider must maintain compliance with FDA Regulation 868.1100 Class I to deliver finished, sterile kits. This opportunity falls under NAICS code 339112 and is managed by the Medical Supply Chain MD Surg FSF. Performance is designated for FPO 96667, with a response deadline set for November 12, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 8 hours ago

DEADLINE

Precision Optical Lens FabricationThis subcontract for Precision Optical Lens Fabrication involves the manufacture of 10 high-precision light lenses under NSN 6210-01-665-1997 for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating the lenses according to Technical Drawing 0EFD0 216-1019 Revision M using molding, polishing, or precision grinding techniques. Performance will take place at Tinker AFB, and all deliverables must adhere to zero-non-conformance sampling plans in accordance with ASQ H1331 or MIL-STD-1916. Strict cybersecurity and regulatory standards are required for this engagement, including a CMMC Level 2 self-assessment and full compliance with NIST SP 800-171. The opportunity falls under NAICS code 339112, with a response deadline set for November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Nonmetallic Hose Assembly Manufacturing and SupplyThis subcontract involves the manufacturing and supply of ten nonmetallic hose assemblies for prime contractors supporting DLA Weapons Support projects. The contractor is responsible for producing or sourcing assemblies that match NSN 4720015717519, with final delivery to DLA Distribution in Albany, Georgia. Strict adherence to military and federal standards is required, including packaging and marking per MIL-STD-2073-1E and MIL-STD-129, and palletization according to RP001 DLA Packaging Requirements. Additionally, all hazardous material labeling must conform to 29 CFR 1910.1200. The opportunity is categorized under NAICS code 339112 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 8 hours ago

DEADLINE

Gasket Supply (NSN 5330-01-202-6647)This subcontract involves the manufacture and supply of 229 gaskets for prime contractors supporting the Defense Logistics Agency Weapons Support Fluid Handling Division. All units must be produced or sourced in strict accordance with TDP Rev A and drawing NR 88277 7D0065 Revision A, with a mandatory requirement that all materials remain asbestos-free per FED-STD-313. Final delivery of the gaskets is designated for the DLA Distribution Depot Oklahoma located at Tinker AFB. To ensure compliance, the provider must adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N for all packaging and marking procedures. Additionally, the contractor is required to maintain US/Canada Joint Certification Program certification and CMMC Level 2 security standards. The project falls under NAICS code 339112 and is managed under the Department of Defense.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Surgical Recheck Valve SupplyThis subcontract for the Department of Defense Medical Supply Chain involves the manufacture and supply of specialized medical-grade recheck valves. These components must be compatible with the S-SCORT suction unit and 1200 CC canister, utilizing medical-grade polymers and silicone for valve seals. To ensure safety and efficacy, all assembly must be performed in clean-room environments in strict compliance with DLA quality requirements and medical device biocompatibility standards. The project is categorized under NAICS code 339112 and is designated for performance at Davis Monthan AFB. The contract focuses on supporting prime contractors through the delivery of high-precision valves that meet rigorous military and medical specifications.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 8 hours ago

DEADLINE

Surgical Eye Shield Component ManufacturerThis subcontract opportunity is for a manufacturer to produce flesh-colored plastic eye shields for prime contractors supporting Department of Defense DLA Troop Support Medical Supply Chain projects. The selected provider must utilize precision molding or CNC cutting equipment to create biocompatible, medical-grade plastic components measuring 80mm by 55mm, designed for trauma prevention and post-operative eye occlusion. The contractor is responsible for delivering bulk quantities of un-assembled shields and must ensure strict compliance with the Berry Amendment regarding domestic sourcing. This requirement falls under NAICS code 339112, with the place of performance designated as FPO 09566-4008.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 8 hours ago

DEADLINE

Sterile Silicone Surgical Vascular Loop SupplierThis subcontract involves the manufacture and supply of sterile, disposable surgical vascular loops for the Department of Defense under the Medical Supply Chain MD Surg FSF. The required product consists of blue silicone rubber loops in Maxi size, measuring 2.5 mm wide by 37 cm long, with a guaranteed shelf life of 60 months. Deliveries are to be made to the Naval Medical Readiness Logistics Command in Williamsburg. Compliance with strict regulatory standards is mandatory, including FDA Class I registration, listing, and labeling. Additionally, the supplier must ensure that packaging adheres to ASTM D3951 and that all marking follows Medical Marking Standard No. 1. The scope of work specifically requires the delivery of four packages of these sterile loops.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 8 hours ago

DEADLINE

Nasopharyngeal Airway ManufacturerThis subcontract involves the manufacture of sterile, 28 French disposable plastic nasopharyngeal airways for prime contractors supporting Department of Defense DLA Troop Support Medical Supply Chain projects. The manufacturer is responsible for fabricating the devices using medical-grade plastic polymers within cleanroom facilities, ensuring all products meet FDA Regulation 868.5100 for Class I medical devices. The scope of work requires the delivery of 70 sterile airways, organized into seven packages of ten. Performance for this contract is based in Montevideo, and the project falls under NAICS code 339112.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 8 hours ago

DEADLINE

Intraosseous Injection Needle Set SupplierThis subcontract involves the supply of adult intraosseous injection needle sets to prime contractors supporting the Department of Defense Medical Supply Chain. The required kits must feature 15-gauge 25mm 304 stainless steel needles, EZ-Connects, and wristbands. All products must be sterile, latex-free, and fully compatible with EZ-IO battery powered drivers. The supplier is responsible for ensuring all packaging and marking adhere to MIL-STD-2073-1E and MIL-STD-129 standards. Performance for this contract is based in Montevideo, and the procurement falls under NAICS code 339112.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Shoulder Screw Manufacturing and SupplyThis subcontract involves the manufacture or sourcing of 371 shoulder screws, identified by NSN 5305017223405, to support prime contractors fulfilling DLA supply contracts. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division. All hardware must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility. Strict adherence to technical and quality standards is required, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization per RP001. Additionally, the provider must maintain a quality management system compliant with either SAE AS9003 or ISO 9001. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

Spring (Heavy Gauge) Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Plain Cap Nuts (NSN 5310-01-3490759)This subcontract involves the manufacture or procurement of 2,757 plain cap nuts under NSN 5310-01-3490759 for prime contractors supporting Department of Defense projects. These components are designated as Critical Application Items and must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The contract is managed by the DLA Weapons Support ASC Commodities Division with performance located in Texarkana. To be eligible, the provider must maintain a CMMC Level 2 self-assessment and ensure full compliance with the Buy American Act and the Berry Amendment. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Self-Locking Nuts (NAS1758)This HUBZone set-aside subcontract, managed by the Department of Defense DLA Weapons Support ASC Commodities Division, involves the supply of 1,841 double self-locking nuts with extended washers. The required components must strictly adhere to NAS1758 Revision 3 and NSN 5310010430046, specifically part number NAS1758L6. All parts must be manufactured or sourced in compliance with the DLA Master List of Technical and Quality Requirements for critical application items. The contract is designated under NAICS code 332312, with the place of performance located at Tinker AFB. Interested parties must have submitted responses by the deadline of November 13, 2026. This procurement ensures that prime contractors on DLA supply contracts receive specialized hardware meeting rigorous military and technical specifications.

Fabricated Structural Metal Manufacturing

POSTED

about 8 hours ago

DEADLINE

Quick Release Pin SupplierThis subcontract involves the supply of 43 specialized quick-release pins, identified by NSN 5315-015-33818-8, to support prime contractors delivering for the Department of Defense under the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing these pins in strict accordance with the technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements. All items must be packaged according to RP001 DLA Packaging Requirements and delivered to the designated DLA destination in San Diego, California. The procurement falls under NAICS code 334418, with a response deadline set for November 13, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 8 hours ago

DEADLINE

Machine Bolt Supplier (NSN 5306-0133-73780)This subcontract involves the supply of 11 machine bolts identified by NSN 5306013373780 for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing the bolts to ensure they meet all required material specifications. Additionally, the contractor must provide Safety Data Sheets that comply with Federal Standard No. 313 and 29 CFR 1910.1200(g). The contract falls under NAICS code 333318 and specifies the place of performance as Tracy, California. Interested parties must adhere to the response deadline of November 13, 2026, following the posting date of November 6, 2026.

Other Commercial and Service Industry Machinery Manufacturing

POSTED

about 8 hours ago

DEADLINE

Hexagon Head Cap Screw SupplierThis subcontract involves the supply of hexagon head cap screws for prime contractors supporting DLA Weapons Support ASC projects. The supplier is responsible for manufacturing or sourcing screws that adhere to ASME B18.2.1 and NSN 5305-00-939-0608 standards. Quality assurance must be conducted via sampling per MIL-STD-1916 or ASQ H1331, and the provider must maintain an SAE AS9003 or ISO 9001 certified quality system. The contract requires the delivery of 20 completed screws to DLA Distribution centers in Albany and New Cumberland. All shipments must be packaged and labeled in strict accordance with ASTM D3951, RP001, MIL-STD-129, and MIL-STD-130N. This opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

Raw Material Supply for Close Tolerance FastenersThis subcontract involves the supply of raw metal stock for prime contractors working on DLA Weapons Support ASC projects. The scope of work requires the provision of high-grade alloy or specialty steel wire, bar, or rod that adheres to the specific chemical and physical properties required for NSN 5305-01-167-9755. To ensure quality and traceability, all delivered materials must be accompanied by Material Test Reports and maintain full compliance with the Buy American Act. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with performance taking place in New Cumberland. Interested parties must respond by November 13, 2026, for this requirement categorized under NAICS code 331110.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 8 hours ago

DEADLINE

Precision Close Tolerance Screw FabricationThis subcontract for Precision Close Tolerance Screw Fabrication involves the manufacture of 4,333 finished, inspected, and packaged screws for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires precision machining and forming in accordance with NSN 5305-01-167-9755 and the DLA Master List, utilizing CNC machining and metrology equipment. Performance will take place in New Cumberland. To ensure quality and compliance, the contractor must maintain SAE AS9003 or ISO 9001 quality systems and adhere to sampling standards per MIL-STD-1916 or ASQ H1331. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, falling under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

Machine Screw Supply (NAS1102-06-44)This subcontract involves the supply of 100 specialized aerospace-grade machine screws for the Department of Defense, specifically through the DLA Weapons Support ASC Commodities Division. The required components must match NAS1102-06-44 and NSN 5305011771791 standards. Performance will take place at Hill AFB, with the contractor responsible for either manufacturing or sourcing the fasteners to meet strict aerospace specifications. Compliance with government logistics and packaging standards is mandatory, requiring adherence to ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 DLA Packaging Requirements for palletization. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, under NAICS code 332710.

POSTED

about 8 hours ago

DEADLINE

Supply of Socket Head Cap ScrewsThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the procurement of 1,004 socket head cap screws. The selected provider is responsible for manufacturing or sourcing the hardware and ensuring all items strictly adhere to MIL-STD-129 standards for marking and labeling to support prime contractors fulfilling DLA supply contracts. Logistics for the order are handled through Government-Arranged Transportation via the First Destination Transportation program. Performance for this contract is centered in Tracy, California, with a response deadline set for November 13, 2026.

Ball and Roller Bearing Manufacturing

POSTED

about 8 hours ago

DEADLINE

Military Preservation and Packaging ServicesThis subcontract for Military Preservation and Packaging Services supports prime contractors on projects for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The scope of work involves the preservation, packaging, packing, and marking of hardware to prevent corrosion and damage during transit. All operations must be executed in strict accordance with MIL-DTL-197M, and the provider must utilize a packaging facility that adheres to Section 4 of that same standard. The performance of these services will take place in San Diego, California. The opportunity was posted on November 6, 2026, with a response deadline of November 13, 2026. The contract falls under NAICS code 492110 and focuses on the delivery of properly preserved and marked shipments for government use.

Couriers and Express Delivery Services

POSTED

about 8 hours ago

DEADLINE

Annular Ball Bearing Manufacturing and SupplyThis subcontract involves the manufacture and supply of 34 specialized annular ball bearings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The provider is responsible for sourcing or manufacturing these components to meet specific technical data requirements accessed via the DLA portal, with performance taking place in San Diego. Strict quality control measures are mandatory for this project, requiring adherence to the verification requirements outlined in Section 4 of MIL-DTL-197M. Additionally, the contractor must implement sampling plans in accordance with either MIL-STD-1916 or ASQ H1331, Table 1, to ensure all delivered units meet the Department of Defense standards.

Ball and Roller Bearing Manufacturing

POSTED

about 8 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS