Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Machined Adapter Manufacturing

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

ANNISTON, AL, 36201-5021, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of a Straight Tube to Boss Adapter (NSN 4730016181180) to SAE J514-2 hydraulic standards, including machining, inspection, and military-compliant packaging.

Similar Contracts

Same NAICS industry code

GOVERNMENT FIRST ARTIC

Solicitation # SPE7L1-26-Q-1455

This contract solicits four units of a critical gun part designated as a lever and shaft, with unique technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers. The item is classified as a defense article under the International Traffic in Arms Regulations and the Arms Export Control Act, mandating that all manufacturers or exporters register with the Directorate of Defense Trade Controls; failure to provide proof of registration will render an offer ineligible. Government First Article Testing is required, and offerors may be contacted post-submission to price the FAT requirement. Two exhibits must be submitted: one fully assembled and coated unit and one machined but unassembled, uncoated unit. The NSN is 0001S00000052, with a delivery schedule of 281 days after contract award. The solicitation number is SPE7L1-26-Q-1455, issued on August 5, 2026, with responses due by August 14, 2026, under the Department of Defense’s Land Supply Chain, with performance at Hill AFB, Utah. The contracting office point of contact is Zane Zwayer, reachable via email and phone listed in the contract data.

LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-618K

The contract pertains to the procurement of 55 units of a BRACKET, CLAMP LOWER with NSN 5342-01-086-1493 under solicitation SPE4A7-26-T-618K, with a response deadline of August 13, 2026, and a delivery requirement of 363 days after award. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, incorporating specific identifiers such as RD002 for Covered Defense Information, RP001 for packaging, RQ006 for quality conformance inspection, and RQ001 for tailored higher-level contract quality requirements. The Certificate of Quality Compliance and DD Form 1423s are required, and all data must align with the Technical Data Package. Inspection and acceptance must occur at the origin, and government identification must be removed from non-accepted supplies. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and compliance with DFARS 252.225-7048 is mandatory. Access to this controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed required DLA training and received formal approval. The place of performance is Tracy, California, 95304-5000, with primary point of contact Christian Roberson from the Department of Defense’s ASC Supplier Operations AE and AF Division.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

Gear and Transmission Component SupplyThe contract pertains to the supply of precision-machined components including gears, shafts, bearings, and transmission sub-assemblies specifically designed for use within tractor drive units. These parts are critical to the mechanical functionality and performance of military-grade equipment, requiring high standards of engineering precision and material durability. The solicitation is issued as a subcontract under NAICS code 332994, indicating the focus is on other fabricated metal product manufacturing, with performance expected to occur in New Cumberland, Pennsylvania, at the designated zip code 17070-5002. The opportunity was posted on August 4, 2026, with a firm response deadline of August 7, 2026, leaving a narrow three-day window for potential suppliers to submit proposals. While no set-aside classification or agency-specific procurement restrictions are specified, the contract is managed by the Department of Defense through its Construction & Equipment Manufacture and Construction division. All submissions must be made through the DIBBS platform, with the official solicitation accessible via the provided UI link. Suppliers are expected to meet stringent quality and delivery criteria consistent with defense production requirements.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supply of Swing Check Valve Hinge (NSN: 4820017286397)The contract entails the supply of two units of a hinge component designed for a swing check valve, identified by NSN 4820017286397, and must fully comply with military specifications including RA001 as listed on the DLA Master List. The components are required to be packaged and marked in accordance with MIL-STD-129 standards, ensuring proper identification, handling, and traceability throughout military logistics channels. The solicitation is issued as a subcontract under the NAICS code 332994, indicating classification within other fabricated metal product manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. Performance of the contract is to occur at a military postal address with the zip code 96691-2900, indicating the delivery point is likely a forward-operating or overseas military facility. The proposal must be submitted by the response deadline of August 17, 2026, with the solicitation posted on August 4, 2026, providing a two-week window for potential suppliers to prepare and submit their offers.

Defense Logistics Agency

POSTED

DEADLINE

Precision Coupling Component Supply

FLUID HANDLING DIVISION

POSTED

DEADLINE

Manufacture and Supply of Valve Disk Retainer (NSN 4820017287589)

Defense Logistics Agency

POSTED

DEADLINE

Hose Bushing Component Manufacturing / Supply

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Metal Tube Assembly ManufacturingThe contract seeks the manufacture and supply of a metal tube assembly identified by NSN 4710014825088, engineered to meet stringent military specifications covering design, quality assurance, packaging, and cybersecurity requirements. This is a subcontract under the Department of Defense, managed by the MARITIME SUPPLY CHAIN ESOC BUYS, and performance is designated to occur at Fort Lee, Virginia, with a ZIP code of 23801. The North American Industry Classification System code is 332994, indicating the work falls under other fabricated metal product manufacturing. All deliverables must adhere to defense-grade standards to ensure operational readiness and interoperability within military systems. The solicitation was posted on August 4, 2026, and responses are due by August 17, 2026, with no set-aside provisions specified. The contract does not include a designated point of contact, and no solicitation number is provided in the data. Participation requires full compliance with cybersecurity protocols intended to safeguard sensitive data throughout the manufacturing and supply chain process. The product must be delivered in packaging that protects against environmental damage and meets military handling and storage guidelines. While the contract is not linked to a specific prime contractor, successful bidders must demonstrate capacity to fulfill all technical, logistical, and regulatory demands inherent to Department of Defense procurement.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Linear Actuating Cylinder Assembly ManufacturingThe contract entails the manufacture and delivery of sixty units of linear actuating cylinder assemblies designated by NSN 3040-01-572-7391, all of which must fully comply with Defense Logistics Agency technical specifications, engineering drawings, and quality assurance standards. The performance of this work is governed by stringent military requirements to ensure reliability and interoperability within defense systems. This is a small business set-aside procurement under the SBA program, specifically reserved for total small business concerns as defined by FAR 19.5, and falls under the NAICS code 332994 for other fabricated metal product manufacturing. The solicitation was posted on August 4, 2026, with a response deadline of August 19, 2026, and is structured as a subcontract opportunity under the Strategic Acquisition Program Directorate within the Department of Defense. Bidders are expected to adhere to all technical and regulatory requirements without exception, and the work must be performed in accordance with the designated defense supply chain protocols. The opportunity is publicly accessible via the DIBBS portal, and while no specific performance location or point of contact is listed, all submissions must meet the federal acquisition and small business eligibility criteria to be considered.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Gasket Supply and DeliveryFour gaskets with NSN 5330-01-686-0198 are to be supplied in full compliance with DLA, MIL-STD-2073-1E, and MIL-STD-129 standards, encompassing proper preservation, packaging, and labeling procedures to meet military logistics requirements. The delivery deadline is strictly five days from award, ensuring rapid turnarounds for operational readiness, and the items must be delivered to the specified performance location in Bremerton, Washington, with zip code 98314-5001. The contract is structured as a subcontract under the Department of Defense’s Maritime Supply Chain ESOC Buys initiative, with a NAICS code of 332994 indicating classification under Other Miscellaneous Fabricated Metal Product Manufacturing. The solicitation posting date is August 4, 2026, and responses must be submitted by August 17, 2026, with the complete details accessible through the provided DIBBS link.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Manufacture of Air Duct Hose (5/16 IN. ID, 2 13/32 IN. WL) with Dacron ReinforcementThe contract calls for the manufacture and delivery of a precision air duct hose with a 5/16-inch inner diameter and a 2 13/32-inch working length, featuring a Dacron-reinforced outer layer to comply with military specifications. The component is designed for high-performance applications requiring durability and resistance to environmental stress, ensuring reliability under demanding operational conditions. The work must adhere strictly to military standards for materials, construction, and testing, with all deliverables expected to meet rigorous quality and performance benchmarks. The solicitation is issued as a subcontract under the NAICS code 332994 for other fabricated metal product manufacturing, with the place of performance located in Key West, Florida, at ZIP code 33040-9059. The posting date is August 4, 2026, and responses are due by August 17, 2026, leaving a thirteen-day window for qualified vendors to submit proposals. The contract is managed by the Fluid Handling Division within the Department of Defense, and interested parties must access the full solicitation details through the designated DIBBS portal link provided. No set-aside provisions or organizational type restrictions are specified, leaving the opportunity open to eligible subcontractors meeting the technical and compliance requirements.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Precision Manufacturing of Surge Chamber (Defense Component)The contract entails the precision manufacture of a surge chamber designed to meet rigorous military specifications, encompassing full lifecycle responsibilities from initial engineering and material fabrication to final assembly and quality assurance. All work must comply with Department of Defense standards set by DLA, ensuring the component satisfies operational requirements for durability, performance, and reliability in defense applications. The subcontract is tied to NAICS code 332994, indicating specialization in other fabricated metal product manufacturing, and performance is centered at FE Warren AFB with a ZIP code of 82005-2663. The solicitation was posted on August 4, 2026, with a firm deadline for responses on August 17, 2026, indicating a tight window for qualified suppliers to submit proposals. While no set-aside classification is specified, the contract is structured as a subcontract under the Department of Defense’s Construction & Equipment Manu & Con organization. The location of performance and alignment with DLA protocols underscore the critical nature of the component within defense infrastructure, and all deliverables must be fully traceable, inspected, and documented to meet federal compliance requirements without exception.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

Solicitation # SPE7M0-26-Q-1147

This contract specifies the procurement of cold-rolled low-carbon steel strip, compliant with ASTM A109/A109M and SAE AMS2807C standards, measuring 0.0625 inches thick by 3 inches wide, in whole-foot lengths between 8 and 16 feet, with a weight of 0.638 pounds per foot and Edge Type No. 2. The material must be supplied as stripped metal with continuous identification markings on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy and grade, manufacturer’s name, heat and lot number, and exact dimensions. Markings are required to be legible, waterproof, and applied via stamping or stenciling without contaminating the product; adhesive labels are permitted for bars, tubes, and shapes under 0.250 inches in nominal OD, while tags are acceptable for wire. A complete Certificate of Quality Compliance, or mill certification, must accompany every shipment and be submitted to the DLA Troop Support Contracting Officer. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD) as mandated by DLA Troop Support, and any deviation from this requirement constitutes a non-compliant bid with potential criminal penalties. Packaging and marking must conform to MIL-STD-2073-1E, MIL-STD-129, and ASTM A700, with special codes Z and ZZ for preservation and labeling. All items must be shipped in full-foot increments only, and shipments must exclude parcel post, using instead the fastest traceable freight method to the designated Puget Sound Naval Shipyard address. The contract is a firm-fixed-price agreement with zero variance allowance, destination inspection and acceptance, and FOB origin terms. Delivery is required within 30 days after award, and all technical data, including the CDRL-METALSCERT, must align with DLA’s Master List of Technical and Quality Requirements. Failure to meet any specification, including packaging, marking, or material certification, is grounds for rejection.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 3 hours ago

DEADLINE

TAPE, INSULATION, ELECTR

Solicitation # SPE7M0-26-T-031K

This contract specifies the procurement of electrical insulation tape meeting MIL-I-19166C revision C dated 02/26/2021, with a unit of issue of 1 RO equaling 108 feet, for a total quantity of 1,200 ROs. The item is classified as a commercial item and carries a shelf life of 12 months from manufacture, non-extendable, unless stored under controlled conditions of 50°F to 80°F and less than 75% relative humidity, in which case it may be inspected and re-certified up to a maximum of five years. It is designated as hazardous under HMIC code P, requiring full compliance with Safety Data Sheet (SDS) submission standards including hazard labels and a completed transmittal form to dscrchempol@dla.mil. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129R, with palletization conforming to DLA packaging requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance unless otherwise directed; unspecified attributes are treated as major. The tape must qualify under QPL-19166-30 revision 30 and comply with all referenced technical and quality requirements from the DLA Master List. Delivery is FOB origin with a five-day delivery window to Pearl Harbor Naval Shipyard, Hawaii, and requires full compliance with DLA procurement notes for transportation and freight. The NSN is 5970-00-612-8492 with a required delivery date of July 31, 2026, and all documentation must reflect current DLA unit of issue and marking specifications.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE7M0-26-T-031Q

This contract pertains to the procurement of one elbow hose, identified by NSN 4730016175913 and part number FS2702-12-12-FG from Brennan Industries, with a total quantity of one unit. The item is designated as a critical application component, and all materials must strictly comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over any other standards including ASTM D3951 and MIL-STD-129 for packaging and labeling. The use of Class I ozone-depleting chemicals is explicitly prohibited, and any alternative substitutes must be pre-approved unless already authorized under the specifications. Delivery is required within five days of contract award, with FOB origin terms, no variance in quantity allowed, and inspection and acceptance occurring at the destination. Packaging must adhere to DLA’s packaging requirements, including palletization and labeling per MIL-STD-129, with unit of issue and quantity per unit pack exactly as specified. Shipment must be sent via traceable freight methods, excluding parcel post, to the designated delivery point at 547 Philadelphia Avenue, Reading, PA, under RDD/ NMCS shipment directives. The contract number is SPE7M0-26-T-031Q, with a required delivery date of July 15, 2026, and the solicitation was posted on August 5, 2026, with responses due by August 17, 2026. The item falls under NAICS code 332919 and is procured by the Department of Defense through the Maritime Supply Chain ESOc Buys office.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE7M0-26-T-031L

The contract pertains to the procurement of 8 machine bolts, identified by NSN 5306-01-507-7094 and part number 60-01-3745A, issued under solicitation SPE7M0-26-T-031L by the Department of Defense’s Maritime Supply Chain ESOC. Delivery is required within five days of award, FOB origin, with strict zero variance in quantity and inspection and acceptance occurring at the destination. The supplier must comply with all DLA Master List of Technical and Quality Requirements, which supersede other standards, including ASTM D3951 and MIL-STD-129 for packaging and marking. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances mandated unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The bolts must be physically marked per DLA requirements and packaged per RP001 with palletization adhering to DLA packaging directives. Delivery must be shipped via traceable freight to the Puget Sound Naval Shipyard in Bremerton, WA, with parcel post explicitly prohibited. The required delivery date is July 31, 2026, and the contract mandates full adherence to configuration change management and variance procedures. The supplier is identified as Electric Boat Corp or BEK, Inc., both listed under the same part number.

Nonferrous Forging

POSTED

about 3 hours ago

DEADLINE

CONTACT, ELECTRICAL

Solicitation # SPE7M0-26-T-031N

This contract is for the procurement of one electrical contact component, identified by part number 3RT2036-1AN20 and NSN 5999017312005, manufactured by SIEMENS INDUSTRY, INC. The requirement is issued under solicitation SPE7M0-26-T-031N with a firm delivery deadline of five days after award and delivery must be FOB origin. The quantity is fixed at one unit with no tolerance for variance. Packaging and marking must strictly follow MIL-STD-2073-1E and MIL-STD-129 standards, with packaging codes and methods specified including preservative method 41, dry packaging, and D3 unit container with E5 intermediate container. The item must be palletized according to DLA packaging requirements and shipped via traceable freight methods—parcel post is prohibited. The delivery and freight address is Fort Stewart, Georgia, with the same recipient for mark for instructions. A technical and quality compliance requirement is incorporated by reference from the DLA Master List, and all supplies must comply with government identification removal protocols and physical marking standards. The contract includes government-only administrative codes and indicates an original required delivery date of June 10, 2026, though no ship date is specified. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, under a federal procurement framework managed by the Department of Defense and the Maritime Supply Chain ESOC.

Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

CORD, ELECTRICAL

Solicitation # SPE7M0-26-T-031J

The contract specifies the procurement of a single electrical cord with NSN/Part Number 6145-01-695-6822, requiring delivery within five days of award. The solicitation is issued under SPE7M0-26-T-031J with a response deadline of August 17, 2026, and was posted on August 5, 2026. This is a federal procurement under the Department of Defense through the Maritime Supply Chain ESOC Buys office, with performance required at Camp Lejeune, North Carolina, 28542-0088. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. Packaging must comply with DLA packaging requirements, and if the advice code is 2N, 28, or 34, the cord must be supplied in continuous length with no multiple unit packs; if 2P or 39, continuous length with multiple unit packs is acceptable, with the advice code superseding any conflicting schedule data. Any configuration changes require an engineering change proposal or variance request, and non-accepted supplies must have government identification removed. The alternate offeror must submit a complete data package including details for both the approved and alternate part. Primary point of contact is Abaigael Masterson at abaigael.masterson@dla.mil or 614-693-2532.

Saw Blade and Handtool Manufacturing

POSTED

about 3 hours ago

DEADLINE

BEARING, STAVE SHAPED

Solicitation # SPE7M0-26-Q-1149

The contract specifies the procurement of 24 stave bearings, Class 3, Size No. 9, 1/16 inch oversize, 30 inches long, designed for use as an aft stern tube bearing assembly and manufactured to MIL-DTL-17901C with compliance to MIL-STD-129R and MIL-STD-2073-1E. Each stave is individually packaged in a unit package with no preservative required, wrapped in opaque or kraft paper to shield from sunlight, and enclosed in a weather-resistant single-wall fiberboard container with glued seams—no staples allowed. All units are overpacked in overseas-grade wooden boxes to ensure protection during transit and storage. Strict packaging rules prohibit bulk packaging, metal strapping directly on the staves, and any labeling on bare surfaces. The item is classified as a Type I shelf-life item with a non-extendable shelf life of 180 months and falls under the DLA Master List of Technical and Quality Requirements. The procurement prohibits ozone-depleting chemicals and mercury-containing compounds, with limited exceptions for specific functional uses mandated by NAVSEA. The delivery is FOB origin with a 30-day lead time, to be inspected and accepted at destination. The required sampling method follows MIL-STD-1916 or ASQ SPE7M0-26-Q-1149 with zero non-conformances permitted unless otherwise specified. Special marking “DO NOT BEND” must be applied to all unit containers, and shelf-life dates are to be indicated. The end user is the Egyptian Navy, with shipments routed through Amentum Warehouse in Fredericksburg, VA, and ultimately delivered to Ras El Tin, Alexandria. The contract mandates full and open competition and requires all technical and quality standards referenced from DLA’s eProcurement portal to be strictly adhered to. Substitutions for restricted materials require prior approval, and deviations must be formally requested through an Engineering Change Proposal. The item is identified by NSN 2010-01-209-9650 and is subject to a zero variance in quantity with delivery scheduled for early 2026.

Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE7M0-26-Q-1148

The contract specifies the procurement of low-carbon cold-rolled steel strip measuring 0.0625 inches thick, 2 inches wide, and lengths between 96 and 192 inches, with a weight of 0.425 pounds per foot, as identified by NSN 9515-00-516-5739. The material must conform to ASTM A109/A109M and SAE AMS2807C standards, with temper 4 and finish 2, and must be supplied in whole-foot increments only. All units require continuous identification markings including the contract delivery order number, NSN, specification revision, alloy and temper details, manufacturer’s name, heat and lot numbers, and exact dimensions. Markings must be applied via stenciling or stamping, be legible, waterproof, and non-contaminating, while adhesive labels are permitted for narrow strips under 0.250 inches nominal OD. A Certificate of Quality Compliance, or mill material certification, must accompany each shipment and be forwarded to the DLA Troop Support Contracting Officer. The contract mandates strict compliance with the Qualified Suppliers List for Distributors (QSLD), restricting award eligibility exclusively to suppliers listed on the official DLA QSLD roster; any deviation or use of non-approved sources constitutes an unauthorized substitution and may result in criminal penalties. Packaging must follow MIL-STD-2073-1E and ASTM A700 specifications, with special codes Z and ZZ applied for preservation and marking as required. Markings must adhere to MIL-STD-129, including dual-unit quantities where applicable, and all shipments must avoid parcel post, instead using traceable freight methods. The delivery point is Puget Sound Naval Shipyard, with a firm fixed price and zero tolerance for quantity variance. Inspection and acceptance occur at destination, and the material must be delivered within 30 days after award. The contract also designates this item as a critical application, with a specific requirement for eight-foot continuous lengths for use on the USS Abraham Lincoln (CVN-72).

Rolled Steel Shape Manufacturing

POSTED

about 3 hours ago

DEADLINE

ELBOW, PIPE TO TUBE

Solicitation # SPE7M0-26-T-031M

The contract is for one unit of an elbow fitting, specifically a pipe to tube component identified by NSN 4730-01-299-7309 and part number 16-12CTX-B from Parker-Hannifin Corporation, under solicitation SPE7M0-26-T-031M. Delivery is required within five days of award, with shipment to be made FOB origin in accordance with strict packaging standards including ASTM D3951 and MIL-STD-129 labeling, while adhering to DLA’s Master List of Technical and Quality Requirements which override any conflicting specifications. The item must not contain any Class I ozone-depleting chemicals, and any substitute materials require prior approval unless explicitly permitted by specification. Packaging must comply with DLA’s procurement guidelines including palletization standards, and the unit of issue is a single ea with no tolerance for quantity variance. Delivery destination is the Marine Wing Support Squadron 272 in Jacksonville, North Carolina, with all shipments required to use the fastest traceable transport method, explicitly prohibiting parcel post. The original required delivery date is July 24, 2026, and all government-specific identifiers, including the project code TP 1 and freight tracking number, must be accurately applied to the shipment.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

NUT, HOSE COUPLING

Solicitation # SPE7M0-26-T-031P

The contract is for the procurement of two NUT, HOSE COUPLING units with NSN 4730015442756, each priced at $2.00, totaling $4.00, under solicitation SPE7M0-26-T-031P. Delivery is required within five days of order placement, with FOB origin terms and zero variance allowance on quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while adhering strictly to all DLA Master List of Technical and Quality Requirements, which override any conflicting ASTM standards. Packaging and labeling must conform to MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements. The item is classified as a commercial off-the-shelf product, and government identification must be removed from non-accepted supplies. Shipment must be sent by the fastest traceable means, excluding parcel post, to Fort Eustis, Virginia, with detailed mark-for and freight shipping addresses provided. The required delivery date is August 6, 2026, and the contract specifies government-use-only identifiers including IPD, DIC, and FC codes. All documentation references the DLA unit of issue system and aligns with DoD procurement protocols.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

Packaging and Palletization Services (DLA-Compliant)

Other Warehousing and Storage

POSTED

DEADLINE

Hazardous Material Labeling and Compliance Services

Other Scientific and Technical Consulting Services

POSTED

DEADLINE