Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Machined Washer Manufacturing

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture of 1,530 precision recessed washers designated as BACW10BN5SC, manufactured to stringent aerospace standards that include full material compliance, exact dimensional tolerances, and adherence to MIL-STD-130N marking requirements for part identification and traceability. Each unit must be produced with documented traceability through all stages of fabrication and inspection to ensure quality and regulatory compliance. The work is scoped as a subcontract under the NAICS code 332722 and is managed by the ASC Commodities Division of the Department of Defense, with performance required at the designated location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 26, 2026, and responses must be submitted by August 3, 2026, with all submissions handled through the DIBBS platform linked in the contract details.

General Info

Manufacture 1,530 BACW10BN5SC washers to aerospace standards with full traceability, delivered to New Cumberland, PA by August 3, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 26

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of 1,530 recessed washers (BACW10BN5SC) to aerospace specifications, including material compliance, dimensional accuracy, MIL-STD-130N marking, and traceability.

Similar Contracts

Same NAICS industry code

Shear Bolt Manufacturing and SupplyThe contract entails the manufacture and delivery of 9,524 shear bolts designated by NSN 5306-01-123-4603, classified as Critical Safety and Critical Application Items that must adhere to strict military specifications governing quality, traceability, and marking. These components are essential for operational safety and require full compliance with defense standards throughout production, including documented material sourcing, lot tracking, and precise labeling to ensure accountability and reliability in military systems. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 332722 indicating classification under other fabricated metal product manufacturing. The Department of Defense, through its ASC Commodities Division, is the contracting authority, and responses must be submitted by August 6, 2026, following the July 27, 2026 posting date. All work is expected to meet exacting defense requirements without deviation, and the place of performance and point of contact details are not specified in the provided data.

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

BOLT, SHEARThis contract, identified by solicitation number SPE4A6-26-R-XB56, is a total small business set-aside for the procurement of 9,524 shear bolts, NSN 5306-01-123-4603, under a firm fixed price structure with no variance permitted in quantity. The item is designated as a Critical Safety Item and a Critical Application Item, requiring strict adherence to quality, traceability, and safeguarding standards. All supplies must meet technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, including inspection protocols per MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and sampling plans must align with designated verification levels or AQLs for critical, major, and minor attributes. Quality compliance must conform to SAE AS9100 for manufacturers and non-manufacturers, with documentation such as Certificate of Quality Compliance mandated under CDRLs and DD Form 1423. Packaging and marking are strictly governed by MIL-STD-2073-1E and MIL-STD-129, with each unit pack required to bear the lot and serial number, contractor and manufacturer CAGE codes, and part number, in accordance with MIL-STD-130N paragraph 4.1.b(2) for government identification. Preservation methods must be cleaning and drying as defined by method code 10, with packaging code U and intermediate container E5. The contract mandates origin inspection and acceptance, with delivery due 174 days after award, and FOB origin terms apply. Special provisions include prohibitions on hexavalent chromium, toxic hazardous materials, and covered defense telecommunications equipment, as well as mandatory compliance with cyber incident reporting and safeguarding of covered defense information. Contractors must use WAWF for all invoicing and comply with clauses on combating trafficking, labor rights, and accelerated payments to small business subcontractors. The solicitation is governed by a best-value trade-off methodology giving significant weight to past performance and historical quality over price and delivery schedule. All submissions must be made via DIBBS, and deviations from technical or packaging specifications require prior written approval from the DSC Contracting Officer.

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

53--NUT,SELF-LOCKING,PLThe contract solicits 784 self-locking nuts with NSN 5310011780205 for delivery to the DLA Distribution Depot in Oklahoma, with a delivery deadline of 245 days after award. This is a source-controlled item requiring compliance with the approved drawing from supplier 15653 F49657-3, and all furnished items must strictly adhere to the specifications outlined in the referenced technical drawing. The solicitation is issued as an RFQ under number SPE4A626T09UZ, posted on July 27, 2026, with quotes due by August 4, 2026. Only electronic submissions are accepted, and hard copies of the solicitation are not available; all technical documents including drawings and military standards must be obtained electronically through the provided portal. The purchasing office is DLA Aviation headquartered in Richmond, Virginia, and inquiries must be directed via email to the designated point of contact. The NAICS code 332722 indicates the category is for machine shops, and the procurement is open to all responsible sources without set-aside restrictions.

POSTED

about 20 hours ago

DEADLINE

4730 PIPE, THREE QUARTER INCHThe U.S. Navy’s Fleet Logistics Center Puget Sound is soliciting quotations for a total small business set-aside contract under solicitation number N0040626Q0441 to procure various pipe fittings and components, including three-quarter inch and other sizes of pipe compliant with MIL-T-16420 specifications, along with elbows, tees, reducing fittings, bushings, unions, adapters, and bosses. The contract is classified under NAICS code 332722 and is restricted exclusively to small business concerns, with all responsible small businesses invited to submit bids. Evaluation will be based on a combined assessment of technical factors including delivery timelines, price, and past performance, with no single factor prioritized over another. The response deadline is August 7, 2026, and the anticipated award date is August 2026. All deliveries and performance are expected to align with government requirements, and the contracting officer, Lorraine Small, can be contacted for inquiries. The work will be managed through the office located in Bremerton, Washington.

Navsup Flt Logistics Ctr Puget Sound

POSTED

about 20 hours ago

DEADLINE

5305 BOLT HEX HEADThe Fleet Logistics Center Puget Sound is seeking to procure 5305 Bolt, Hex Head, Part Number 55024-28-S, specifically for the repair of the Side-port Door Assembly on a U.S. Navy vessel. The bolt must be manufactured from CRES 316 stainless steel and must precisely match the form, fit, and function of the original hardware to ensure the safe and reliable operation of the door assembly. This procurement is sole sourced to JERED LLC due to the critical nature of the part and the requirement that only OEM replacement components from this manufacturer meet the stringent technical and safety standards necessary for naval vessel integrity. While interest from other suppliers may be submitted, all responses will be reviewed only to assess whether competition is feasible, and the Government retains full discretion to proceed without competition. Quotes will be evaluated holistically based on technical acceptability, including delivery performance, price, and past performance, with no single factor prioritized over others; price reasonableness and offeror responsibility will also be assessed under RFO 12.203 procedures. All inquiries must be submitted via email only, and the anticipated award date is August 2026. The solicitation number is N0040626Q0426, with a response deadline of July 31, 2026, and the contracting officer is Anna Rose M. Fulton at annarose.m.fulton.civ@us.navy.mil.

Navsup Flt Logistics Ctr Puget Sound

POSTED

about 20 hours ago

DEADLINE

NUT, SELF-LKG, HEThis contract pertains to the procurement of self-locking heavy hex nuts designated as Special Emphasis Level I material for critical shipboard systems, where failure could result in catastrophic consequences including loss of life or vessel. The nuts must conform to MIL-DTL-32258 with material specified as QQ-N-281, Class A or B, and require strict traceability from raw material through final inspection, including unique heat-lot markings and documented certification of chemical and mechanical properties. Testing and certification mandates include dye penetrant inspection per ASTM-E1417 or ASTM-E1444, quality conformance tests per MIL-DTL-32258, and first article testing per NASM25027 and MIL-N-25027/1, with substitutions allowed only through approved documentation from qualified sources. The contractor must maintain an ISO-9001 quality system, supplemented by ISO-10012 and ISO/IEC 17025 for calibration, and is subject to government quality assurance at source with full access to facilities and records. All materials and certifications must be traceable through the manufacturing chain, with re-certification required after any process that alters material properties, using permanent, legible markings compliant with MIL-STD-792, including six-dot identification on fastener heads. Delivery is governed by a strict schedule requiring submission of certification data at least 20 days prior to delivery, with final acceptance limited to 365 days after contract effective date. All documentation must be submitted via Wide Area Work Flow (WAWF) using designated DODAAC codes (N50286 for delivery, N39040 for inspection and acceptance) and emailed notifications to designated Navy addresses, with no material to be shipped without prior acceptance. The contract requires full compliance with Buy American and Small Business set-aside provisions, includes a one-year warranty from date of delivery, prohibits mercury use, and mandates adherence to NAVSEA 0948-LP-045-7010 and other naval standards. A DO priority rating under DPAS applies, and the order is issued under Emergency Acquisition Flexibilities. Waivers and deviations of any classification require formal submission through ECDS system with detailed justification and are subject to contracting officer approval. Final inspection requires zero-defect lot acceptance, 100% verification of certification data and traceability markings, and submission of a signed Certificate of Compliance affirming full con

Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

SCREW,CAP,HEXAGON HThe contract pertains to the procurement of hexagon head cap screws designated by part number HBA-5/8-11X36SAEGR5, supplied by Flowserve Corporation, and governed by strict technical, quality, and packaging standards. Performance is tied to NAVSUP WSS-MECH Code N94 requirements, with explicit precedence given to the contract’s Schedule and Amendments over other referenced documents, including industry standards and drawings. The screw must comply with exact design, material, and dimensional specifications, and the use of mercury or mercury-containing compounds is strictly prohibited. Packaging must adhere to MIL-PRF-23199, particularly when cleanliness controls under MIL-STD-767 or similar standards apply, mandating heat-sealed envelopes for qualifying parts; green poly bags may be used only if explicitly permitted and in compliance with all referenced clauses. Fire-retardant packaging is no longer required. All deliveries require a Certificate of Compliance per DI-MISC-81356, submitted alongside the material, with one certificate per unique contract, NSN, and nomenclature combination. Inspection and acceptance are governed by DD Form 250 codes, with final acceptance occurring at destination, and no inspection is waived unless specified. The contractor must maintain a government-acceptable quality system, with all inspection records retained throughout and beyond contract performance. The solicitation is issued under N0010426QEB80 by the Department of Defense’s Naval Supply Systems Command, with responses due by August 24, 2026. The performance location is mechanically defined, and all contractual documents are deemed issued upon electronic transmission, including email or EDI. Contractors must comply with cybersecurity maturity certification requirements, security prohibitions, and the mandatory use of Workflow Pro for payment processing. Priority ratings under April 2008 guidelines apply for national defense use, and annual representations and certifications are mandated under a 2026 deviation. All technical documentation is derived from the part number and ordering data; no drawings or technical data files are provided, and any deviations or waivers require prior written approval from the Contracting Officer with full technical justification, including evaluation of form, fit, and function. The contract includes specific instructions for distribution statements on documents, delivery frequency tied to end-of-contract timelines, and detailed formatting requirements for DD Form 1423 compliance. Pricing and data submission must follow Group I, II, III, or IV classifications based on the nature of deliverables, with

Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

53--WASHER,RECESSEDThe contract solicits the procurement of 135,073 washers, recessed, identified by NSN 5310010932480, with quantities divided across three lines: 16,909, 63,887, and 54,277 units respectively. All units are to be delivered to DLA Distribution Warner Robins within 200 days after order placement. Only two approved sources are authorized for this requirement: 0SCY9 and 78286, both under part number 70361-05010-103. The solicitation, identified as SPE4A6626Q1213, is issued as a combined request for quotation with no hard copies available; all submissions must be made electronically. The solicitation was posted on July 27, 2026, with responses due by July 1, 2027. No specifications, plans, or drawings are provided, and any responsible source may submit a quote. The contracting office is DLA Aviation, located in Richmond, Virginia, and inquiries must be directed via email to the designated point of contact, with additional details accessible through the SAM.gov portal using the solicitation number.

POSTED

about 20 hours ago

DEADLINE

SCREWThis solicitation, numbered SPMYM226Q7814, is a total small business set-aside issued by the Department of Defense through DLA Maritime - Puget Sound for the procurement of screws, with responses due by Tuesday, 28 July 2026 at 10:00 AM PST. All submissions must be made electronically via SAM.gov, and only electronically submitted, fully completed, and signed solicitations will be considered responsive. Bidders must provide their contractor information, CAGE code, point of contact, and quote FOB destination Bremerton, WA, along with manufacturer details including name, address, and country of origin in Section B.K21. Compliance with NIST SP 800-171 is mandatory unless the item qualifies as commercial off-the-shelf, in which case the bidder must explicitly identify it as such and provide supporting documentation to the contracting officer during submission. Bidders must also complete Section K by checking applicable boxes for cybersecurity requirements under FAR 52.204-24, confirm compliance with signature requirements in box 28 and boxes 30a, b, and c, and provide accurate lead times or delivery dates in Section F. The solicitation is restricted to small businesses as defined under NAICS code 332722, and all bids must be submitted via email in their completed, signed form to be eligible for award.

DLA Maritime - Puget Sound

POSTED

about 20 hours ago

DEADLINE

in about 9 hours

Machine Screw Manufacturing and SupplyThe contract entails the manufacture and supply of 39 packages of precision machine screws designated by NSN 5305016162120, with strict adherence to Department of Defense technical standards set by the Defense Logistics Agency. Each shipment must meet zero-defect sampling requirements, ensuring that every component satisfies rigorous quality control protocols without any allowable tolerances for imperfections. The screws must be packaged in full compliance with military specifications to ensure durability, traceability, and readiness for immediate deployment in critical defense systems. All work must be performed by a contractor capable of fulfilling these exacting demands under the NAICS code 332722, which classifies the production of screws, bolts, and threaded fasteners. The place of performance is designated as Robins Air Force Base, Georgia, with a response deadline of August 3, 2026, and the contract is structured as a subcontract under the ASC Commodities Division of the Department of Defense.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Metal Washer ManufacturingThe contract requires the manufacture of 179 flat washers to strict military specifications, encompassing material compliance, precise dimensional tolerances, and specific surface finish requirements. Zero non-conformances are mandated under either MIL-STD-1916 or ASQ H1331 sampling standards, leaving no room for defective units. The work is classified as a subcontract under NAICS code 332722, indicating a focus on forged, pressed, and stamped metal products. Performance is to be carried out at NEW CUMBERLAND, PA, with a response deadline of August 3, 2026, and the solicitation was posted on July 26, 2026. The contracting entity is the ASC SUPPLIER OPER OEM DIVISION, operating under the Department of Defense, and compliance with all technical and quality control conditions is non-negotiable.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Precision O-Ring Manufacturing & SupplyThe contract titled Precision O-Ring Manufacturing & Supply seeks a subcontractor to manufacture and supply preformed O-ring packings identified by NSN 5331012770923 in full compliance with military specifications. The work encompasses complete production capabilities including material sourcing, precision molding, rigorous quality control procedures, and proper packaging to meet defense standards. All items must be produced to exacting technical requirements ensuring performance under demanding operational conditions. The place of performance is designated as FPO with ZIP code 96349, indicating delivery to a military postal address, likely for deployment or storage at overseas or expeditionary locations. The solicitation was posted on July 26, 2026, with a firm response deadline of August 6, 2026, leaving a narrow window for interested parties to submit proposals. The NAICS code 332722 identifies this as an industrial rubber product manufacturing opportunity, specifically targeting suppliers with expertise in molded rubber components for defense applications. The contract is managed under the Department of Defense through the LAND SUPPLY CHAIN organization, underscoring its importance to logistical and equipment readiness efforts. This is a subcontract opportunity, meaning the prime contractor will be responsible for overall contract fulfillment, and the selected vendor must be prepared to integrate seamlessly into the broader supply chain under strict defense procurement protocols.

LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Packaging, Marking & Logistics SupportThe contract requires full compliance with military standards for packaging, marking, and bar-coding as defined by MIL-STD-2073-1E and MIL-STD-129, ensuring all items are properly prepared for military logistics and supply chain handling. Delivery is specified as FOB Origin, meaning the contractor assumes responsibility for packaging and readiness at the point of shipment, with no obligation for transportation costs or risk beyond that point. Invoicing must be processed through the Wide Area Workflow system to meet Department of Defense financial and documentation protocols. This is a subcontract classified as a Total Small Business Set-Aside under FAR 19.5, reserved exclusively for small businesses certified by the Small Business Administration. The NAICS code 493190 indicates the work falls under Other Truck Transportation, suggesting the focus is on logistics and transportation support services tied to military packaging requirements. The contracting office is the ASC Commodities Division under the Department of Defense, with proposals due by August 7, 2026, following a July 27, 2026 posting date. Compliance with all federal and military standards is mandatory for award consideration.

Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

CMMC Assessment & Cybersecurity ComplianceThis contract entails a CMMC Level 2 assessment and comprehensive cybersecurity system hardening to ensure full compliance with NIST SP 800-171 requirements. The scope includes a detailed audit of existing security controls, identification of gaps, and implementation of remediation measures to meet the necessary cyber hygiene standards. The contractor is responsible for achieving certification through a C3PAO accredited organization, ensuring that all assessed systems are properly documented, secure, and aligned with Department of Defense cybersecurity mandates. The contract is structured as a subcontract under a Total Small Business Set-Aside designation, reserved exclusively for small businesses as defined by the SBA. It is categorized under NAICS code 541512 for Computer Systems Design Services and is issued by the ASC Commodities Division within the Department of Defense. Proposals are due by August 7, 2026, with the solicitation published on July 27, 2026. The work may be performed remotely or at the contractor’s facility, with no specific physical location designated for performance, and the award will be managed under federal subcontracting guidelines applicable to defense-related cybersecurity services.

Computer Systems Design Services

POSTED

about 15 hours ago

DEADLINE

Technical Data & Export Control Compliance ServicesThe contract pertains to the management of ITAR and EAR-controlled technical data with a focus on ensuring full compliance with U.S. export control regulations. It requires comprehensive services including strict access control protocols, specialized training programs, and ongoing monitoring to enforce restrictions on foreign nationals, ensuring that sensitive technical information is handled in accordance with federal law. The scope emphasizes operational procedures that safeguard controlled data across all stages of handling, from receipt and storage to dissemination and disposal, with particular attention to personnel vetting and security awareness. This is a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, and falls under NAICS code 541611 for administrative management and general management consulting services. The work is contracted through the ASC Commodities Division of the Department of Defense, with a response deadline of August 7, 2026, and a posted date of July 27, 2026. Performance location details are unspecified, indicating flexibility or that the work may be conducted remotely or at multiple sites. The solicitation number is SPE4A626RXB74, and the contract is managed through the DIBBS platform, requiring interested parties to review and submit proposals through the official online portal.

Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

First Article Testing & Quality Certification ServicesThe contract requires independent execution and comprehensive documentation of First Article Testing in strict accordance with DI-NDTI-80809B, encompassing detailed inspection, precise measurement, and formal reporting to the Defense Logistics Agency. This work must be performed with full adherence to quality assurance standards and delivered results that validate compliance with technical specifications for defense-related components or systems. All testing activities, methodologies, and outcomes must be thoroughly recorded and submitted to DLA for review and certification. This subcontract, issued under a Total Small Business Set-Aside, is classified under NAICS code 541330 and is targeted exclusively at small businesses. The performance location and detailed office address are unspecified, but the contracting entity is the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 27, 2026, with a firm response deadline of August 7, 2026, allowing interested small businesses to submit proposals through the DIBBS platform. The requirement emphasizes accuracy, traceability, and regulatory compliance in delivering first article quality certification.

Engineering Services

POSTED

about 15 hours ago

DEADLINE

Electrical Component Manufacturing & AssemblyThe contract requires the manufacture, assembly, and quality assurance of electrical leads in full compliance with military specifications, ensuring rigorous adherence to performance and reliability standards. All work must include First Article Testing to validate conformance before full-scale production and includes serialized delivery to enable full traceability of each component throughout its lifecycle. The solicitation is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, classified under NAICS code 335999 for other electrical equipment and component manufacturing. It is issued under the Department of Defense via the ASC Commodities Division and allows responses until August 7, 2026, with the expectation of performance under a subcontracting arrangement. The place of performance and point of contact details are not specified, but all deliverables must meet stringent defense quality and documentation requirements.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

Logistics and Shipment CoordinationThe contract focuses on the coordination of FOB-origin shipments for shear bolts, requiring full compliance with the Web-Based Supply Chain System for invoicing, ensuring all documentation meets WAWF standards. Shipment handling must be executed under DPAS-rated priority to guarantee timely delivery in support of defense logistics, with routing strictly aligned to DoDAAC and CAGE codes to ensure accurate and secure delivery to designated military recipients. This subcontract is designated as a Total Small Business Set-Aside under FAR 19.5, exclusively available to small businesses as defined by the SBA, and is classified under NAICS code 488510, which pertains to other support activities for air transportation and logistics coordination. The posting date is July 27, 2026, with responses due by August 6, 2026, and the contracting entity is the ASC Commodities Division within the Department of Defense, indicating this effort supports critical defense supply chain operations.

Freight Transportation Arrangement

POSTED

about 15 hours ago

DEADLINE

Quality Inspection and Conformance ServicesThe contract requires comprehensive quality inspection and conformance testing of shear bolts using zero-defect sampling plans aligned with MIL-STD-1916 or ASQ H1331 standards, ensuring rigorous adherence to defect-free criteria throughout production. Full documentation of all testing procedures, results, and compliance records must be maintained and provided as part of delivery, leaving no room for ambiguity in quality assurance and traceability. This work is critical to confirming that shear bolts meet exacting military and industrial specifications without compromise. This is a total small business set-aside subcontract under NAICS code 541330, awarded by the ASC Commodities Division within the Department of Defense, with a response deadline of August 6, 2026. The solicitation is open exclusively to small businesses as defined by the SBA, and performance will be carried out under the direction of the DLA, though the specific place of performance is not detailed. Interested parties must submit responses through the designated DIBBS portal, and all activities must comply with federal subcontracting regulations and the stringent quality protocols defined by the referenced military and quality standards.

Engineering Services

POSTED

about 15 hours ago

DEADLINE

Packaging, Preservation, and Marking ServicesThe contract calls for the military-compliant packaging, preservation, and marking of shear bolts in full accordance with MIL-STD-2073-1E and MIL-STD-129, ensuring all items meet Department of Defense standards for handling, storage, and logistics. This includes the application of barcodes and labeling as required by the specifications, with strict adherence to durability, clarity, and traceability protocols for military supply chain operations. All work must be performed under a Total Small Business Set-Aside, classified under NAICS code 561910, meaning only small businesses are eligible to bid, promoting small business participation in defense logistics. The solicitation is issued by the ASC Commodities Division within the Department of Defense, with a response deadline of August 6, 2026, and was posted on July 27, 2026. The contract is structured as a subcontract, indicating the winning vendor will likely provide services to a prime contractor fulfilling broader defense requirements. While the place of performance and point of contact details are not specified, full compliance with military packaging and marking standards remains the central obligation, with no deviations permitted. Bidders must possess the capability to meet exacting defense logistics requirements and ensure seamless integration of shear bolts into defense inventory and distribution systems.

Packaging and Labeling Services

POSTED

about 15 hours ago

DEADLINE

Packaging & Preservation Services per MIL-STD-2073-1EThe contract requires comprehensive military-compliant packaging, preservation, and labeling services strictly aligned with MIL-STD-2073-1E specifications. This includes vacuum sealing of items to prevent moisture and contaminants, incorporation of desiccants to maintain dry internal environments, and application of MIL-STD-129 labeling to ensure accurate identification and tracking throughout military logistics channels. All work must meet rigorous defense standards to ensure long-term integrity, readiness, and compatibility with existing supply chain protocols for equipment and materials under the Department of Defense’s ASC Commodities Division. The opportunity is structured as a subcontract with a response deadline of August 27, 2026, and is classified under NAICS code 323112, indicating it pertains to printing and related support activities. The contract was posted on July 27, 2026, and the performance location and specific point of contact are not detailed, but the award will be administered through the Department of Defense’s defense logistics infrastructure. Interested parties must submit proposals via the designated DIBBS portal by the stated deadline to be considered for award.

Commercial Flexographic Printing

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Cybersecurity Compliance & NIST SP 800-171 ImplementationThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 Rev 2 cybersecurity controls across systems that handle covered defense information, ensuring full compliance with federal protection standards. This includes conducting thorough assessments of current security postures, developing and managing Plans of Action and Milestones to address identified gaps, and establishing robust incident reporting procedures to meet mandated timelines and requirements. All activities must be performed in alignment with the stringent security framework outlined in NIST SP 800-171 Rev 2, with continuous monitoring and documentation to demonstrate adherence. This is a subcontract under the Department of Defense, specifically managed by the ASC Commodities Division, with a NAICS code of 541512 indicating it pertains to computer systems design services. The solicitation was posted on July 27, 2026, and responses are due by August 27, 2026. The place of performance is not specified, but the work must support Defense Information systems, and all compliance activities must be executed regardless of location. The contract emphasizes sustained operational security, formal documentation, and accountability through structured remediation efforts and timely incident response.

Computer Systems Design Services

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Quality Assurance & Government Inspection Support ServicesThe contract entails providing advanced inspection systems and comprehensive support services to facilitate government-led quality verification at the point of origin, ensuring full compliance with MIL-STD-1916 and ASQ Z1.4 standards. This includes establishing robust audit readiness protocols, maintaining accurate and accessible recordkeeping systems, and managing nonconformances through structured corrective action processes to uphold defect prevention and continuous quality improvement. The scope demands integration of inspection technologies and procedures that enable real-time data capture, traceability, and reporting to meet rigorous defense quality requirements. The work is classified as a subcontract under NAICS code 541330 and is being administered by the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 27, 2026, with responses due by August 27, 2026. While specific performance locations and point of contact details are not provided, the nature of the services implies operations at supplier or manufacturing facilities where government quality verification takes place. Successful proposers must demonstrate experience with military standards, proven quality systems, and the ability to deliver scalable inspection infrastructure capable of supporting high-stakes defense supply chain integrity.

Engineering Services

POSTED

about 15 hours ago

DEADLINE

in about 1 month