Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Machining and Assembly of Pulley Assemblies

Active

Federal

Response Deadline10/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity, issued by the Department of Defense Fluid Handling Division, involves the precision CNC machining and assembly of Pulley Assembly, Gro (NSN 010742334). The selected contractor will support prime contractors delivering DLA supply contracts by adhering to Source Control Drawing 80064 RE-D49481, Rev H. Key deliverables include the finished pulley assemblies and comprehensive First Article Test reports to validate all manufacturing processes. The contract is set aside for Service-Disabled Veteran-Owned Small Businesses and requires CMMC Level 2 certification for security compliance. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 13, 2026, under NAICS code 333249.

General Info

DoD subcontract for CNC machining pulley assemblies for SDVOSB firms in Pennsylvania.

Agency

Department Of Defense → FLUID HANDLING DIVISION

NAICS

333249 - Other Industrial Machinery Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SDVOSBC

Documents

This scope was carved out of SPE7M4-27-T-0075.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PULLEY ASSEMBLY, GRO

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 1

subcontract

Response DeadlineOct 13

Submission deadline

Response Deadline

10/13/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures and assembles Pulley Assembly, Gro (NSN 010742334) for prime contractors delivering DLA supply contracts. Performs precision CNC machining and assembly per Source Control Drawing 80064 RE-D49481, Rev H. Executes First Article Test (FAT) to validate manufacturing processes. Requires CMMC Level 2 certification. Delivers finished pulley assemblies and FAT reports.

Similar Contracts

Same NAICS industry code

Process Equipment Supply (Centrifuges & Dewatering)

POSTED

about 23 hours ago

DEADLINE

Wet Wall Cyclone Precision Fabrication and Assembly

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Manufacture and Supply of Valve Lapping Tool (NSN 5120-01-620-5982)This subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, requires the manufacture and supply of one specialized valve lapping tool under NSN 5120-01-620-5982. The contractor must fabricate the tool according to TDP Rev A Gen 1 specifications, specifically for part numbers 1000601-ST-24-LD or 100601-X-XT-24-LD. Production requires precision machining equipment and strict adherence to bare item marking RQ017 and sampling standards MIL-STD-1916 or ASQ H1331. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333249 and requires full compliance with the Buy American Act. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 15, 2026, to provide the necessary equipment and expertise to meet these technical defense standards.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Friction Clutch Assemblies (NSN 3010016065569)This subcontract involves the manufacture or sourcing of friction clutch assemblies, specifically hardware component NSN 3010016065569, for prime contractors supporting the Department of Defense DLA Weapons Support Strategic Acquisition Program Directorate. The selected provider is responsible for delivering physical clutch assembly units as authorized by issued orders, ensuring all shipments strictly adhere to RP001 DLA Packaging Requirements. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333249. Interested parties must submit their responses by October 21, 2026, following the posting date of October 6, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Supply of Bearing Unit Housings (NSN 3130-01-613-8475)This subcontract involves the precision manufacture and supply of five bearing unit housings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The items must be produced in strict accordance with NSN 3130-01-613-8475, DWG 8475396, and TDP Rev A Gen 1. To ensure quality and compliance, the manufacturer must utilize precision machining equipment and adhere to the Buy American Act. Quality assurance requires inspections performed per MIL-STD-1916 or ASQ H1331, with final packaging meeting ASTM D3951 standards. The performance of the contract is centered in Keyport, Washington, under NAICS code 333249. Interested parties must respond by October 14, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Rotary Assembly Supplier (NSN 1285-01-689-572)This subcontract involves the manufacture or procurement of one Rotary Assembly meeting NSN 1285-01-689-572 specifications for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The selected supplier is responsible for providing all necessary Material Safety Data Sheets and ensuring that the assembly adheres to government-standard packaging and labeling requirements. The project falls under NAICS code 333249 and requires delivery of the assembly and documentation FOB Origin, with the place of performance located in Fort Campbell. Interested parties must respond by October 19, 2026, to fulfill the requirements of the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Manufacturing and Inspection Tooling FabricationThis small business set-aside subcontract involves the design and fabrication of specialized manufacturing and inspection tooling for prime contractors supporting the Naval Surface Warfare Center Indian Head Division. The scope of work includes the development of manufacturing jigs, fixtures, and dimensional inspection gauges to ensure part compliance, utilizing precision grinding equipment and CAD/CAM software. The project requires strict adherence to CMMC Level 2 and NIST SP 800-171 R2 security standards. Interested parties must submit their responses by November 5, 2026, to provide the completed tooling deliverables under NAICS code 333249 for the Department of Defense.

Nswc Indian Head Division

POSTED

DEADLINE

Supply of Mechanical Pipe and Conduit Bending MachinesThis subcontract, issued by the Defense Logistics Agency under the Department of Defense, requires the supply of three hand-operated, bench-portable mechanical pipe and conduit bending machines for prime contractors on DLA Troop Support projects. The equipment must meet NSN 3441004910516 and accommodate a material diameter of 1.500 inches. The delivery must include all necessary mounting hardware and comprehensive technical documentation, specifically Ship Manuals and CDRLs submitted via DD Form 1423s. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333249. Interested parties must respond by October 16, 2026, to fulfill the requirement for the three completed bending machines and their associated documentation.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Spur Gears (NSN 3020010739764)This subcontract involves the supply of 219 precision-manufactured spur gears for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Opns Engines projects. The contractor is responsible for manufacturing or sourcing the gears in accordance with NSN 3020010739764, utilizing precision machining equipment for gear cutting and grinding to meet strict technical specifications. To ensure operational readiness, the provider must adhere to the DLA Master List of Technical and Quality Requirements and conduct thorough point-of-origin quality inspections. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 333249.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Supply of Flexible Drive Shafts (NSN 3040015662434)This subcontract involves the manufacture or procurement of up to 11 flexible drive shafts, identified by NSN 3040015662434, for prime contractors supporting Land Supply Chain projects under the Department of Defense. The production process requires the use of precision machining and winding equipment, with strict adherence to RP001 DLA Packaging Requirements and FAR 52.223-3 regulations regarding hazardous materials. Delivery of the components is to be handled via First Destination Transportation. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333249. Interested parties must submit their responses by October 19, 2026, following the posting date of October 4, 2026.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Linear Actuating Cylinder AssembliesThis subcontract, issued by the Department of Defense Land Supply Chain, requires the manufacture or sourcing of 18 linear actuating cylinder assemblies under NSN 3040015689059. The contractor must utilize precision machining and hydraulic or pneumatic assembly equipment to ensure all units meet strict DLA technical specifications. Additionally, all delivered components must feature Item Unique Identification markings in accordance with MIL-STD-130. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333249. Interested parties must submit their responses by October 19, 2026. This contract supports prime contractors fulfilling broader Defense Logistics Agency supply requirements.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Commercial Ice Machine MaintenanceThis subcontract for Commercial Ice Machine Maintenance involves providing specialized cleaning, descaling, and mechanical repair services for Hoshizaki and Scotsman ice machines. The work is performed for prime contractors on facility projects within the Dorchester School District Two in South Carolina. To ensure the delivery of sanitized and operational equipment, the contractor must use food-grade descalers and water filtration cartridges while strictly adhering to all health department sanitation standards. The solicitation was posted on October 2, 2026, with a response deadline of October 28, 2026. This opportunity falls under NAICS code 333249 and is specifically tailored for the maintenance of commercial ice production systems within educational facilities.

Dorchester School District Two

POSTED

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

RELEASE DEVICE ASSEMBL

Solicitation # SPE7M4-26-T-447R

Solicitation SPE7M4-26-T-447R is a fixed-price, total small business set-aside issued by the Department of Defense, DLA Land and Maritime, Fluid Handling Division. The requirement is for 32 units of Release Device Assembly (NSN 2040-01-025-3334) with a required delivery date of September 29, 2026, to the General Depot of Naval Supplies in Kaohsiung City, Taiwan. Quotations must be submitted via the DIBBS portal by October 8, 2026. This contract contains strict export control requirements under ITAR and EAR, necessitating an approved US/Canada Joint Certification Program certification and specific DLA training for access to technical data. Compliance with CMMC Level 2 certification via a C3PAO and DFARS 252.204-7012 for safeguarding covered defense information is mandatory. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific palletization requirements per RP001. Inspection and acceptance will occur at the origin, requiring a manufacturer inspection system compliant with SAE AS9003 or ISO 9001. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

Hardware Manufacturing

POSTED

DEADLINE

SHAFT, SHOULDERED

Solicitation # SPE7M4-26-T-448Q

Solicitation SPE7M4-26-T-448Q, issued by the DLA Land and Maritime Fluid Handling Division, is a request for quotations for 22 units of a shoulderered shaft plunger, 1/2 inch size, identified by NSN 3040011813715 and Circor Naval Solutions part number 408Z0011J026Z. This critical application item must be delivered FOB Origin to the DLA Distribution Depot Puget Sound in Bremerton, Washington. The required delivery timeline is 165 days after order, with a need ship date of March 23, 2027, and an original required delivery date of November 3, 2028. Inspection and acceptance will occur at the destination per FAR 52.246-2. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. A specific prohibition is placed on the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions per NAVSEA 5100-003D. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. Compliance with various FAR and DFARS clauses is required, specifically those regarding cybersecurity incident reporting, the prohibition of hexavalent chromium, and the safeguarding of covered defense information.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

ELBOW, PIPE TO HOSE

Solicitation # SPE7M3-26-T-8817

This contract is for the procurement of pipe-to-hose elbows made from cadmium-plated copper alloy, featuring a 90-degree flow angle with a 3/8 inch ID hose size and a 1/4 inch nominal pipe size. The items are designated as critical application components and must be manufactured by an accredited manufacturer listed on the PRI Qualified Manufacturer List or Qualified Products List. The total quantity requested is 25 units across two line items, with delivery required within 140 days. The contract specifies strict adherence to SAE AS5185 and AS4842/2C standards and prohibits the use of Class I ozone-depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with shipments directed to DLA Distribution centers in Barstow, California, and Albany, Georgia. The required delivery date for these items is May 12, 2027, with a need ship date of February 2, 2027.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

FITTING, PENETRATION

Solicitation # SPE7M3-26-T-9380

Solicitation SPE7M3-26-T-9380 is a request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of five penetration fittings, identified by NSN 4730012571547 and Triumph Controls LLC part number 57601-01. This is a restricted source item requiring engineering source approval from the Government design control activity. The procurement is categorized under NAICS 332996, with delivery expected within 168 days after order. Inspection and acceptance will occur at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to environmental and material standards, explicitly prohibiting the use of Class I ozone depleting chemicals and the intentional addition of mercury or mercury-containing compounds. Packaging must comply with MIL-STD-2073-1E and RP001, with bags fabricated according to MIL-B-117 and marking performed per MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding sustainable products, hazardous material identification, and the safeguarding of covered defense information.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M3-26-T-5102

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

SWIVEL JOINT, TUBE

Solicitation # SPE7M3-26-T-9499

Solicitation SPE7M3-26-T-9499 is a fixed-price request for quotations issued by the DLA Land and Maritime Fluid Handling Division for 45 stainless steel swivel joint tube elbows with a 1/2 inch nominal tube size, including necessary nuts and sleeves. This procurement is for a critical application item under NSN 4730015677894 and requires compliance with SAE J514-1 standards. Delivery is set for FOB Origin with a required delivery date of July 11, 2027, and a need ship date of February 21, 2026, with a delivery period of 151 days. Inspection and acceptance will occur at the destination, specifically DLA Distribution Anniston in Alabama. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Environmental and safety restrictions prohibit the intentional addition of mercury or the use of Class I ozone-depleting chemicals. Offerors must comply with the Buy American Act and the Berry Amendment, providing disclosure for any non-domestic materials used. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, trafficking in persons, and hazardous material labeling. Quotations must be submitted via the DIBBS portal by October 8, 2026, with a price evaluation preference available for certified HUBZone small businesses.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE

TUBE, BENT, METALLIC

Solicitation # SPE7M4-26-T-448X

Solicitation SPE7M4-26-T-448X is a request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of one metallic bent tube. The item is constructed from aluminum alloy with a 4.5 inch outer diameter and a 0.120 inch wall thickness, identified by NSN 4710010921563. The required delivery date is September 23, 2026, with a delivery timeline of 20 days after order. Shipping is FOB Origin, while inspection and acceptance will occur at the destination. The contractor must adhere to strict technical specifications, including basic drawing 19207 12275302 and reference drawings 19207 11670926 and 19207 12406416. Chemical Agent Resistant Coatings must follow DCSC drawing 16236 CS-2300-0001, and the use of Class I ozone depleting chemicals is prohibited. Quality assurance requires zero non-conformances in sample lots per MIL-STD-105/ASQ Z1.4 or MIL-STD-1916. Packaging and preservation must comply with MIL-H-775 and RP001, with marking following MIL-STD-129. Administrative requirements include the use of Wide Area WorkFlow for invoicing and payment. The solicitation is open for full competition, with a price evaluation preference available for certified HUBZone small businesses. Offerors must comply with the Buy American Act and Berry Amendment, and provide disclosure for any non-domestic materials. Quotations must be submitted via DIBBS by October 8, 2026.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

TUBE ASSEMBLY, METAL

Solicitation # SPE7M4-26-T-447N

Solicitation SPE7M4-26-T-447N is a request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 12 metal tube assemblies, identified by NSN 4710003642181 and part number 3303896. The contract requires delivery within 20 days after order, with an original required delivery date of September 29, 2026. Supplies are to be shipped FOB Origin to the General Depot of Naval Supplies in Kaohsiung City, Taiwan. Inspection and acceptance will also take place at the point of origin in accordance with FAR 52.246-2. The contractor must adhere to strict technical and environmental standards, including the prohibition of Class I ozone-depleting chemicals and the restriction of mercury or mercury-containing compounds. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA procurement requirements. Administrative compliance includes the use of the Wide Area WorkFlow system for invoicing and payment, adherence to DFARS 252.204-7012 for safeguarding covered defense information, and compliance with the Buy American Act and Berry Amendment. Quotes must be submitted via DIBBS and cannot include parts made using additive manufacturing unless specifically authorized.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

STRUT, PROPELLER SHA

Solicitation # SPE7M4-26-T-450V

Solicitation SPE7M4-26-T-450V is a request for quotations issued by the Defense Logistics Agency Land and Maritime, Fluid Handling Division, for the procurement of one kit of Propeller Shaft Struts, identified as NSN 2040-01-733-6679. This item is designated as a critical application item and must be produced in accordance with Technical Data Package Rev A Gen 2, Basic Drawing NR 53711 8864831, Revision A. The delivery is required within 20 days after receipt of order, with the place of performance and delivery located at Naval Special Warfare Group 8 in Pearl City, Hawaii. The contract is offered under FOB Origin terms, and invoicing must be processed electronically through the Wide Area WorkFlow system. The procurement is subject to strict technical and quality requirements, including the DLA Master List, ASTM D3951 for packaging, and MIL-STD-129 for marking and labeling. Compliance with export controls under ITAR and EAR is mandatory, and the use of Class I ozone-depleting chemicals is prohibited. Evaluation factors include a price preference for certified HUBZone small businesses, while offers utilizing additive manufacturing are ineligible for award. Additionally, contractors must adhere to the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information. Inspection and acceptance will occur at the destination.

Other Marine Fishing

POSTED

DEADLINE

HOSE ASSEMBLY, AIR DUCT

Solicitation # SPE7M4-26-T-449N

Solicitation SPE7M4-26-T-449N is a request for quotations issued by the Department of Defense, DLA Land and Maritime, Fluid Handling Division, for the procurement of 10 air duct hose assemblies. The required items feature an 8.0 inch inside diameter and a nominal overall length of 180.0 inches, identified by NSN 4720-01-324-0233 and Rhine Air, Inc part number NFRA-8X. This is designated as a critical application and restricted source item, necessitating engineering source approval by the government design control activity. The contract specifies delivery FOB Origin to DLA Distribution Cherry Point in North Carolina, with an original required delivery date of January 13, 2027, and a need ship date of May 11, 2027. Inspection and acceptance will occur at the destination per FAR 52.246-2. Packaging must adhere to ASTM D3951 and MIL-STD-129, though DLA Master List technical and quality requirements take precedence. Compliance with the Buy American Act, DFARS 252.204-7012 for cybersecurity, and the use of the Wide Area WorkFlow system for invoicing are mandatory.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

TRAY, SHOP MAINTENANCE

Solicitation # SPE7M4-26-T-432E

Solicitation SPE7M4-26-T-432E is a request for quotations issued by the Defense Logistics Agency Land and Maritime Fluid Handling Division for the procurement of two shop maintenance trays, identified by NSN 4940-01-254-9976. The contract requires delivery within 20 days after order, with inspection and acceptance occurring at the point of origin. The items must be manufactured according to the Technical Data Package Rev A Gen 1, specifically Basic Drawing 53711 5978598 Revision B and Reference QAP 13873. Notably, the government will not evaluate or award contracts for items produced using additive manufacturing processes. The procurement is subject to strict regulatory and security requirements, including CMMC Level 2 certification and the safeguarding of covered defense information. Technical data is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals in any stage of production. Packaging must comply with MIL-STD-129 and DLA procurement requirements. Additionally, the solicitation incorporates the Buy American Act and Berry Amendment, while offering a price evaluation preference for certified HUBZone Small Business Concerns. All invoicing and payment requests must be processed electronically through the Wide Area WorkFlow system.

Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M3-26-T-9317

Solicitation SPE7M3-26-T-9317 is a Request for Quotation issued by the DLA Land and Maritime Fluid Handling Division for the procurement of five swivel assemblies. The required items are identified by NSN 4730-00-239-8543 and part number 143200-56-56D20G from Designed Metal Connections Inc, designated as critical application items for E/I C-5 aircraft. Quotes must be submitted via the DIBBS system by October 5, 2026. The need ship date is June 3, 2025, with an original required delivery date of November 4, 2025. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution Warner Robins in Georgia. The contract mandates strict adherence to technical and quality requirements set forth in the DLA Master List, which take precedence over ASTM D3951 packaging standards. All packaging must comply with RP001 and be marked and labeled according to MIL-STD-129. The acquisition falls under NAICS code 332996 and incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment, and safeguarding covered defense information. Payment and receiving reports are to be processed electronically through the Wide Area WorkFlow system.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS