Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Precision Machining and Assembly of Turnlock Fasteners

Active

Federal

Response Deadline10/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the precision machining and assembly of 409 turnlock fastener stud assemblies for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for fabricating and machining these components in accordance with basic drawing 81205 BACS21EE Revision D and the DLA Master List of Technical and Quality Requirements. Work must be performed using precision CNC machining to meet strict BACS tolerances and utilize materials that are compliant with the Berry Amendment. To be eligible for this project, the contractor must maintain CMMC Level 2 and DFARS 252.204-7012 certifications. The place of performance is located at Robins Air Force Base. This requirement falls under NAICS code 339993 and is intended for prime contractors supporting Department of Defense initiatives.

General Info

Precision machining of 409 turnlock fastener assemblies at Robins AFB for DLA Weapons.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

339993 - Fastener, Button, Needle, and Pin Manufacturing

Place of Performance

ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-6376.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

STUD ASSEMBLY, TURNLOCK

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures Stud Assembly, Turnlock Fasteners for prime contractors on DLA Weapons Support ASC projects. Fabricates and machines stud assemblies per basic drawing 81205 BACS21EE Revision D and the DLA Master List of Technical and Quality Requirements. Requires precision CNC machining for BACS tolerances and Berry Amendment compliant materials. Must hold CMMC Level 2 and DFARS 252.204-7012 certifications. Delivers 409 completed fasteners.

Similar Contracts

Same NAICS industry code

Manufacturing of Threaded Rivet Pins (NSN 5320-00-284-2172)This subcontract involves the manufacture of 1,172 threaded rivet pins under NSN 5320-00-284-2172 for the DLA Weapons Support ASC Commodities Division. The project requires the use of precision machining equipment to ensure all components meet the DLA Master List of Technical and Quality Requirements. Performance will take place at Robins Air Force Base, with a total delivery requirement of 1,172 finished pins. The contractor must adhere to strict regulatory and quality standards, including compliance with the Buy American Act and the Berry Amendment regarding materials. Additionally, the contract mandates adherence to DFARS 252.204-7012 and requires sampling conducted according to MIL-STD-1916 or ASQ H1331. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

Quick Release Pin FabricationThis subcontract involves the fabrication of 70 precision quick release pins under NSN 5315012946840 for the DLA Weapons Support ASC Commodities Division. The manufacturer must adhere to NASM17987 and NAS1332 standards, ensuring the final products contain zero mercury. Performance will take place in Tracy, California, with a response deadline of October 30, 2026. To qualify, the contractor must utilize precision machining equipment and maintain a quality system compliant with ISO 9001 or SAE AS9003. Additionally, the provider must meet CMMC Level 2 cybersecurity requirements and perform sampling in accordance with ASQ H1331 or MIL-STD-1916.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

Pin-Rivet Manufacturer/Supplier (NSN 5320-01-157-9145)This subcontract involves the manufacture and supply of 580,000 pin-rivets to support prime contractors under DLA Weapons Support ASC supply contracts. The fasteners must be produced according to NSN 5320-01-157-9145 specifications, with quality control measures adhering to the DLA Master List of Technical and Quality Requirements. The supplier is responsible for packaging the items per ASTM D3951, palletizing according to RP001, and ensuring all markings comply with MIL-STD-129. Final delivery of the 580,000 units is to be made to DLA Distribution DDSP in New Cumberland, Pennsylvania. This requirement falls under NAICS code 339993 for the Department of Defense.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

Shoulder Screw Supply (NSN 5305014145135)This subcontract involves the supply of precision-manufactured shoulder screws, identified by NSN 5305014145135, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The contractor is responsible for manufacturing or sourcing these components in strict adherence to Reference Drawing 81205 BACB30JQ0, Revision D, utilizing precision machining to ensure all specified tolerances are met. Compliance with MIL-STD-129 is required for all marking and shipment procedures. The final deliverables include the physical shoulder screws and the submission of receiving reports through the Wide Area Workflow system. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 339993.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

Stud Assembly, Turnlock Fastener SupplyThis subcontract involves the supply of Stud Assembly Turnlock Fasteners under NSN 5325003692714 for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The selected provider is responsible for manufacturing or sourcing the fasteners, ensuring all items are marked according to MIL-STD-129 and undergo inspection per MIL-STD-1916 or ASQ H1331. The final deliverables are physical fastener assemblies that must strictly adhere to the specified NSN requirements, with a strict prohibition on the use of additive manufacturing unless prior ESA approval is granted. The contract is categorized under NAICS code 339993 and is to be performed in Jacksonville, Florida. Interested parties must note the response deadline of October 30, 2026, following the posting date of October 22, 2026. This procurement ensures the availability of critical hardware components necessary for the maintenance and delivery of weapons support systems.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

Supply of Straight Headed Pins (NSN 5315-00-072-9188)This subcontract involves the supply of precision-engineered straight headed pins, specifically Part Number 3020163P5, for prime contractors working on DLA Weapons Support ASC projects. The items must be manufactured or sourced in strict accordance with Pratt & Whitney Canada Corp specifications and must adhere to the Berry Amendment and Buy American requirements. The contract mandates zero non-conformances for Critical Application Items as defined by the DLA Master List and MIL-STD-1916 or ASQ H1331. The scope of work requires the delivery of one completed pin on a FOB Origin basis. This procurement is managed under NAICS code 339993 for the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

Positive Lock Fastener SupplierThis subcontract involves the supply of five high-precision positive lock fasteners for the DLA Weapons Support ASC Commodities Division. The required components must match NSN 5325016318269 and part numbers 885C836P9 or CA2021-3, with delivery specified as FOB Origin to Fallon, Nevada. The supplier must ensure strict compliance with the Buy American Act and the Berry Amendment, and the use of additive manufacturing is explicitly prohibited. Quality control must adhere to MIL-STD-1916 or ASQ H1331 sampling plans, while cybersecurity protocols must meet DFARS 252.204-7012 standards. The response deadline for this opportunity is October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

FASTENER, POSITIVE LOCK

Solicitation # SPE4A6-27-T-6246

Solicitation SPE4A6-27-T-6246, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of five positive lock fasteners under NSN 5325016318269. The requirement specifies reference part numbers 885C836P9 from Lockheed Martin Corp Naval and CA2021-3 from Howmet Global Fastening Systems Inc. Delivery is required within 20 days after order, with an original required delivery date of October 13, 2026. Shipping is FOB Origin, while inspection and acceptance will occur at the destination in Fallon, Nevada. This is not a small business set-aside, and the government will not evaluate or award offers involving items produced via additive manufacturing. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. Item Unique Identification is not required. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment requests. Offerors must submit quotes via the DLA Internet Bid Board System and comply with various federal regulations, including the Buy American Act, the Berry Amendment, and cybersecurity standards under DFARS 252.204-7012.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

PIN ASSY, LOCKING

Solicitation # SPE4A7-27-R-X093

Solicitation SPE4A7-27-R-X093 is a firm-fixed-price requirement issued by the Defense Logistics Agency (DLA) for the procurement of one locking pin assembly, identified by NSN 1560-00-589-1159. The contract is not a small business set-aside and requires delivery 1114 days after receipt of order. The delivery process includes a First Article Test (FAT) phase, with FAT units due within 467 days, followed by a 180-day government evaluation period, and a final production delivery window of 467 days after FAT approval. Inspection and acceptance are conducted at the origin, while the shipping terms are FOB Destination. The procurement is subject to stringent technical, quality, and export control requirements. It incorporates the DLA Master List of Technical and Quality Requirements and mandates compliance with MIL-STD-129 for packaging and marking. Due to the nature of the technical data, the item is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA authorizations. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports. Evaluation for award will be based on a best-value determination, weighing price, past performance (specifically SPRS assessments), and quoted delivery schedules.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

PIN, STRAIGHT, HEADED

Solicitation # SPE4A0-27-T-0283

Solicitation SPE4A0-27-T-0283 is a fixed-price procurement issued by the DLA Weapons Support Aviation Supply Chain ESOC Buys for the supply of straight headed pins, identified by NSN 5315-01-643-4915. The requirement consists of two line items, each for a quantity of 2 units, with a total delivery requirement of 4 units. The items are to be delivered FOB Origin to a freight shipping address in Pyeongtaek, South Korea, with a required delivery date of October 20, 2026, and a delivery window of 5 days after receipt of order. This is not a small business set-aside, and the procurement falls under NAICS code 339993. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Inspection and acceptance will occur at the destination per FAR 52.246-2, utilizing sampling methods aligned with MIL-STD-1916 or ASQ H1331. Contractors must use the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment requests. Key regulatory compliance includes the Buy American and Balance of Payments Program (DFARS 252.225-7001), safeguarding of covered defense information (DFARS 252.204-7012), and adherence to the Hazard Communication Standard for any hazardous materials. Quotations must be submitted via the DIBBS portal by October 30, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

FASTENER, SPRING TENSIO

Solicitation # SPE4A6-27-T-6391

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

Supply of High-Strength Fasteners and Springs for Motor ClutchThis subcontract involves the supply of high-strength fasteners and springs specifically designed for motor clutches to support prime contractors on DLA Mechanicsburg and NAVSUP Weapon System Support projects. The scope of work includes the sourcing and manufacture of pins, high-tension springs, and military-grade fasteners utilizing certified alloys and high-tensile spring steel. The contractor is required to provide bulk deliveries of certified components, ensuring full material traceability and mill certifications in accordance with TDP Cage codes. This Department of Defense requirement is managed by SPRMM1 DLA Mechanicsburg under NAICS code 339993, with a response deadline set for November 6, 2026.

SPRMM1 DLA Mechanicsburg

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Flexible Cable SupplierThis subcontract involves the manufacture or procurement of three flexible cable units for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The cables must strictly adhere to NSN 5995-01-195-2776 and Part Number F172-PP-0265-A6 from Flexco Microwave Inc, with a requirement for rigorous quality assurance to ensure all technical specifications are met. Notably, any items produced via additive manufacturing must receive ESA approval prior to delivery. The project is categorized under NAICS code 334418 and requires the delivery of the three units to a designated shipping point in Tracy, California. Interested parties should note the response deadline of October 30, 2026, for this Department of Defense requirement.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 16 hours ago

DEADLINE

Spring Pin Supplier (NSN 5315-01-540-3445)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the manufacture or sourcing of two precision spring pins meeting NSN 5315-01-540-3445 specifications. The supplier must ensure all materials are mercury-free and adhere to strict quality assurance sampling standards per MIL-STD-1916 or ASQ H1331. Final products must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 for delivery to Yokosuka Naval Base, Japan. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026, falling under NAICS code 332618.

Other Fabricated Wire Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

Defense-Compliant Packaging and Shipping ServicesThe Defense-Compliant Packaging and Shipping Services subcontract involves providing specialized packaging and preparation for prime contractors delivering hardware to DLA distribution facilities. The scope of work requires strict adherence to ASTM D3951 for packaging and MIL-STD-129 and the DLA Master List of Technical and Quality Requirements for marking and labeling. The contractor must utilize MIL-STD-129 compliant labeling systems to ensure all shipments are ready for FOB Origin transport. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the services will be performed in New Cumberland, Pennsylvania. This opportunity falls under NAICS code 488410, with a response deadline set for October 30, 2026. The primary objective is to ensure that all hardware is properly processed and delivered to the DLA Distribution DDSP New Cumberland facility.

Motor Vehicle Towing

POSTED

about 16 hours ago

DEADLINE

Precision Manufacturing of Grooved, Headless PinsThis subcontract involves the precision manufacturing of 229 headless, grooved pins under NSN 5315011323568 for the DLA Weapons Support ASC Commodities Division. The project requires the use of CNC machining or specialized pin-forming equipment to meet NASM35677 and NASM20700 standards. Quality control must be maintained through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. Eligible contractors must hold SAE AS9003 or ISO 9001 certification and ensure full compliance with the Buy American Act and Berry Amendment. The work is categorized under NAICS code 332721 and will be performed in New Cumberland. Responses for this requirement are due by October 30, 2026.

Precision Turned Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

Supply of Hinge Pins (NSN 5315006331934)This subcontract involves the supply of precision-manufactured hinge pins, specifically NSN 5315006331934, to support prime contractors under the DLA Weapons Support ASC Commodities Division of the Department of Defense. The selected provider is responsible for manufacturing or sourcing the pins using precision machining equipment and ensuring all deliverables are transported to the designated DLA facility at Tinker AFB. Strict adherence to the DLA Master List of Technical and Quality Requirements and DFARS regulations is mandatory for this engagement. The opportunity falls under NAICS code 332510, with a response deadline set for October 30, 2026.

Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

Precision Flat Washer Manufacturing/SupplyThis subcontract involves the fabrication and supply of 75 precision flat washers, identified by NSN 5310-01-483-5528, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The manufacturer must adhere strictly to provided technical data, specifically excluding the use of additive manufacturing. Quality control requires the implementation of zero-based sampling in accordance with MIL-STD-1916 or ASQ H1331, with packaging and labeling following RP001 and MIL-STD-2073-1E standards. The contractor is required to maintain JCP certification to handle ITAR and EAR regulated data and must provide necessary support for the source inspection of critical items. The final delivery of the 75 units is designated as FOB Origin, with the place of performance located in Tracy, California. This procurement falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

Supply of Flat Washers (NSN 5310010978025)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the manufacture or sourcing of 11,484 flat washers identified by NSN 5310010978025. The selected provider will support prime contractors in fulfilling DLA supply contracts, with performance taking place in New Cumberland. To be eligible, contractors must possess a valid CAGE code and UEI, and the opportunity is specifically set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 332722. The contractor is responsible for strict adherence to DLA specifications, including packaging per RP001, physical identification marking per RQ017, and the removal of government identification per RQ011. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

Military-Spec Packaging and Shipping ServicesThis subcontract for Military-Spec Packaging and Shipping Services involves providing specialized packaging for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires packaging items, specifically bolts, in accordance with RP001 and MIL-STD-129, with DLA Master List requirements taking precedence over ASTM D3951. The contractor must utilize MIL-SPEC materials and labeling equipment to ensure all items are properly prepared and documented. Logistical responsibilities include coordinating FOB Origin shipments to DLA Distribution San Joaquin, with the place of performance located in Tracy, California. The project falls under NAICS code 488510 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

Freight Transportation Arrangement

POSTED

about 16 hours ago

DEADLINE

Close Tolerance Bolt FabricationThis subcontract for Close Tolerance Bolt Fabrication involves the production of 61 precision bolts for the DLA Weapons Support ASC Commodities Division. The manufacturer is required to use CNC equipment to meet NSN 5306013483463 specifications while strictly adhering to MIL-STD-1916 or ASQ H1331 sampling plans. Compliance with the Buy American Act and Berry Amendment is mandatory, and the use of additive manufacturing is expressly prohibited. The project is managed under NAICS code 332722 with performance taking place in Tracy, California. Interested parties must note the response deadline of October 30, 2026, for this Department of Defense requirement.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

Supply of Flat Washers (NSN 5310011708539)This subcontract involves the manufacture or sourcing of 23 flat washers, identified by NSN 5310011708539, to support prime contractors on DLA supply contracts. The work is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and will be performed in New Cumberland. The contractor must ensure all items are packaged in strict accordance with RP001 DLA Packaging Requirements for Procurement and coordinate delivery through the First Destination Transportation program. Additionally, the provider is required to maintain an active SAM registration to facilitate invoicing via the Wide Area Workflow system.

Other Nonferrous Metal Foundries (except Die-Casting)

POSTED

about 16 hours ago

DEADLINE

First Article Test (FAT) SpecialistThis subcontract, managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires a First Article Test Specialist to perform validation on wiring harness components for prime contractors. The scope of work involves conducting First Article Testing on one unit, specifically NSN 0001S0000053, utilizing electrical signal integrity equipment to ensure design and manufacturing quality meet strict government standards. The selected provider is responsible for delivering a comprehensive FAT Report and one validated test unit for government approval. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 30, 2026, under NAICS code 541380.

Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

Wiring Harness Supplier (NSN 6150-01-451-1108)This subcontract, issued by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires the procurement of 15 units of wiring harness NSN 6150-01-451-1108. The selected supplier is responsible for manufacturing or sourcing components that strictly adhere to DoD specifications and ensuring all packaging complies with MIL-STD-2073-1E. The contract falls under NAICS code 335999 and requires the provider to maintain an active SAM registration. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 30, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS