Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Machining and Fabrication of Shroud Assembly

Active

Federal

Response Deadline08/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the precise manufacturing and fabrication of a shroud assembly according to engineering drawing 008299365, encompassing all stages from material selection and forming to machining and final dimensional verification. The work demands high accuracy and adherence to specified technical standards, with quality control integrated throughout each phase to ensure compliance with the engineered requirements. All components must be produced using approved methods and materials to meet performance and durability expectations for the intended application. This is a total small business set-aside subcontract under NAICS code 332322, reserved exclusively for small businesses as defined by the SBA. It is issued by the Department of Defense, specifically through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 24, 2026. The solicitation was posted on July 23, 2026, and the place of performance is not specified, indicating flexibility in location as long as deliverables meet contractual obligations. Bidders must be certified small businesses eligible under the FAR 19.5 regulations, and all submissions must align with the technical specifications outlined in the referenced engineering drawing.

General Info

Small business set-aside for shroud assembly manufacturing per drawing 008299365, due August 24, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332322 - Sheet Metal Work ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 24

Submission deadline

Response Deadline

08/24/2026, 05:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and fabrication of the shroud assembly per engineering drawing 008299365, including material selection, forming, machining, and dimensional verification.

Similar Contracts

Same NAICS industry code

Polyurethane Coating Application ServicesThe contract requires the application of military-grade polyurethane coating conforming to MIL-PRF-85285E/F, Type 2, Class H, in FED-STD-595 Color 16473 Gray on aircraft and associated support equipment. This includes all necessary surface preparation steps to ensure proper adhesion and long-term durability under operational conditions, with strict adherence to military specifications for performance and environmental resistance. The work must be performed at the designated place of performance in Tracy, California, with zip code 95304-5000, and all hazardous materials used during the process must be properly labeled in compliance with regulatory standards. This is a subcontract opportunity issued by the Defense Logistics Agency District San Joaquin under the Department of Defense, with a NAICS code of 332322 indicating specialty trade contractors for coating and lining work. The solicitation was posted on July 22, 2026, and responses are due by July 28, 2026, emphasizing a tight turnaround for qualified vendors. The scope demands precision in material application, full compliance with federal and military standards, and proper documentation to support quality assurance and safety protocols throughout the coating process.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Fencing, Backstops, and Safety BarriersYancey County Board of Education is seeking a subcontractor to supply and install fencing, backstops, dugout enclosures, and safety netting for baseball, softball, and football fields to ensure compliance with safety and ADA standards. The work involves the complete installation of protective barriers around athletic fields to enhance player and spectator safety while meeting accessibility requirements. The opportunity is posted as a subcontract with a NAICS code of 332322, indicating it pertains to architectural and structural metals manufacturing. The solicitation was posted on July 22, 2026, and responses are due by July 29, 2026, at 8:00 PM. The project is located in North Carolina, though specific site details are not provided, and the contract is managed under the agency’s procurement system with further information available through the provided online portal.

Yancey County Board of Education

POSTED

DEADLINE

Supplier of Raw Materials (Aluminum or Stainless Steel Blanks)The contract seeks suppliers of military-spec aluminum or stainless steel blanks for the production of government identification plates, requiring full traceability and certified documentation for all materials provided. Materials must meet stringent military standards and be accompanied by verifiable certifications ensuring compliance with quality, composition, and origin requirements essential for defense applications. The blanks are intended for use in a critical manufacturing process governed by federal procurement protocols, and suppliers must demonstrate capability to consistently deliver certified, high-integrity raw material blanks. Performance is centered at Hill Air Force Base with a zip code of 84056-5734, and the solicitation is open under the NAICS code 332322 for specialty forgings and stampings. Subcontractors are invited to respond by the deadline of August 3, 2026, with no set-aside designation applied, meaning all eligible entities may bid. The procurement is managed by the Department of Defense under the Construction & Equipment MRO SVC I organization, and all submissions must align with the technical and compliance expectations outlined in the DIBBS system listing for solicitation SPE8E926T3234.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

STUD, PLAINThis contract pertains to the procurement of STUD, PLAIN with NSN 5307-01-575-4451, under solicitation SPE7LX-26-U-8936, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The requirement is for 131 units, each to be delivered within 14 days of award, with FOB Origin terms and no tolerance for quantity variance. Inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence and must be strictly followed. Marking and labeling of all packages shall adhere to MIL-STD-129, and palletization must meet RP001 DLA Packaging Requirements. The Unit of Issue is each (EA), and the specified QUP is 1, with the packing configuration defined accordingly. This solicitation is a Total Small Business Set-Aside under NAICS code 332322, with responses due by August 6, 2026, and a posted date of July 22, 2026. The estimated quantity is non-binding and may not be fully purchased by the IDC. Government identification must be removed from non-accepted supplies per RQ011 requirements. The DLA Master List governs all technical and quality specifications referenced by R or I numbers, with revisions controlled based on acquisition type and amendment dates. Primary point of contact is Theodore Misiolek, reachable via provided phone and email. All units must be delivered in compliance with the DoD authorized unit of issue, and corresponding ANSI X12 conversions are to be referenced via the official DLA link provided.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Metal Fabrication and WeldingThe contract involves the fabrication of aluminum and steel components for vehicle compartments, storage units, and structural supports, all manufactured to meet AWS D1.1 for steel welding, D1.2 for aluminum welding, and B2.1 for sheet metal standards. Work must be performed in accordance with these industry-specific codes to ensure structural integrity and compliance with federal welding and fabrication requirements. The procurement is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to bid, and it falls under NAICS code 332322 for Metal Fabrication. The opportunity was posted on July 22, 2026, with proposals due by August 17, 2026, and performance is expected to take place at a location identified by the zip code 27348. The contracting agency is the FBI-JEH under the Department of Justice, though no specific point of contact or detailed address information is provided.

POSTED

DEADLINE

Anodized Aluminum Mounting Base SupplyThe contract involves the supply of anodized aluminum mounting bases designed for sensor attachment, featuring precision-threaded holes including two 8-32 and one 10-32 thread configurations. These components are intended for use in defense-related applications and must meet strict material and finish specifications to ensure durability, corrosion resistance, and dimensional accuracy. The solicitation is categorized as a subcontract under NAICS code 332322, which corresponds to fabricated metal product manufacturing, and is linked to the Department of Defense through the agency name W6QK Acc-Apg, with performance required at Aberdeen Proving Ground. Interested vendors must submit responses by the deadline of July 29, 2026, with no set-aside provisions specified, meaning the opportunity is open to all eligible contractors regardless of business size or status.

POSTED

DEADLINE

Transom Magnum Supply (OEM-Specific)The contract calls for the supply of ten units of the TRANSOM MAGNUM, identified by NSN 2090-01-584-2562 and part number 62000025P, manufactured by the Mercury Marine Division of Brunswick Corp. This is a subcontract under a Total Small Business Set-Aside as defined by FAR 19.5, meaning only small businesses are eligible to bid, and it falls under the NAICS code 332322 for boat building. The solicitation was posted on July 22, 2026, with a response deadline of August 4, 2026, at 4:00 AM, and the work is to be performed at Curtis Bay, Maryland, with a ZIP code of 21226. The procuring agency is the Department of Homeland Security through its SFLC Procurement Branch 3, and the procurement is specifically designated for OEM-specific components, indicating a need for authenticated, original equipment manufacturer parts.

Sflc Procurement Branch 3(00040)

POSTED

DEADLINE

Supply of Commercial 2-Tier Shelving UnitsThe contract seeks the supply and delivery of two commercial 2-tier steel shelving units or approved equivalents designed for food service storage applications, ensuring compliance with operational and safety standards in a food handling environment. The requirement is set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside provision, with the NAICS code 332322 indicating classification within the fabricated metal product manufacturing sector. The solicitation is issued by the Department of Veterans Affairs through the 262-NETWORK Contract Office 22, with performance required in Albuquerque, New Mexico, at the ZIP code 87108. Bids must be submitted by the deadline of August 5, 2026, at 5:00 PM, following the publication date of July 22, 2026. This is a subcontract opportunity, and all proposals must meet the technical and regulatory standards for food storage equipment, with an emphasis on durability, cleanliness, and structural integrity of the steel shelving units.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

Fabrication and Supply of Grill Guards for Pusher Chassis Blue Bird School BusesThe contract requires the fabrication and delivery of two custom-engineered aluminum grill guards specifically designed for pusher chassis Blue Bird school buses, with non-standard fitment requirements that necessitate specialized engineering and manufacturing capabilities. The work is subject to an Indian Small Business Economic Enterprise set-aside, meaning only qualified Indian-owned small businesses are eligible to bid, and the procurement is managed by the Indian Education Acquisition Office under the Department of the Interior. The solicitation was posted on July 22, 2026, with responses due by July 30, 2026, and the work falls under NAICS code 332322, which designates the industry as Other Fabricated Metal Product Manufacturing, aligning with the custom fabrication nature of the grill guards. The place of performance and detailed point of contact information are not specified in the data provided, but the contract is intended to support the unique operational and safety needs of school buses serving federally recognized tribal communities.

Indian Education Acquisition Office

POSTED

DEADLINE

Fabrication and Supply of Grill Guards for Conventional Blue Bird School BusesThe contract calls for the fabrication and delivery of ten custom-fit aluminum grill guards designed specifically for conventional Blue Bird school buses, ensuring full compatibility and compliance with established durability standards. The work must be performed by a contractor qualified under the Indian Small Business Economic Enterprise set-aside program, which restricts eligibility to businesses owned and controlled by Native American individuals and is administered under the Department of the Interior. The solicitation is classified under NAICS code 332322, indicating it pertains to the manufacturing of fabricated metal products, and is structured as a subcontract. All deliverables must meet rigorous performance expectations to ensure long-term resilience under operational conditions typical for school transportation environments. The opportunity was posted on July 22, 2026, with a firm response deadline of July 30, 2026, at 4:00 PM Eastern Time. The procuring entity is the Indian Education Acquisition Office within the Department of the Interior, indicating the end use of these grill guards is likely tied to educational transportation services for Indigenous communities. While no specific place of performance or point of contact is provided, the requirement is clear that the subcontractor must deliver fully fabricated, ready-to-install units that are precisely engineered for the designated bus model. This procurement prioritizes small business participation through a targeted set-aside initiative meant to promote economic development within Native American communities.

Indian Education Acquisition Office

POSTED

DEADLINE

53--STUD,PLAINThe solicitation seeks quotes for 131 plain studs, NSN 5307015754451, under a total small business set-aside, with a guaranteed minimum order of 13 units. This procurement is part of a potential Automated Indefinite Delivery Contract with a one-year term or until aggregate orders reach $350,000, with an estimated one order per year. Deliveries will be made to multiple CONUS and OCONUS DLA depots via consolidation and containerization points. The only approved source for this item is 64678 DDE 23507438, and no specifications, plans, or drawings are available. The solicitation is an RFQ exclusively accessible electronically via the provided SAM.gov link, with no hard copies issued. Quotes must be submitted electronically before the deadline of August 6, 2026, and all responsible sources are eligible to respond. The contracting office is the DLA Land and Maritime organization based in Columbus, Ohio, and inquiries must be directed via email to the designated point of contact listed in the solicitation document.

DLA Land And Maritime

POSTED

DEADLINE

Supply of Specialty Fasteners and Hardware for Aircraft RepairThe contract entails the supply of military specification fasteners, pins, brackets, and related hardware components essential for aircraft repair kits, ensuring all items meet stringent defense standards for performance and durability. Traceability is a critical requirement, meaning each component must be documented with full history from manufacturer through delivery to guarantee quality control and compliance with aerospace integrity protocols. Items must be properly kitted according to specific repair unit requirements, streamlining logistics and installation for field maintenance teams. The work falls under NAICS code 332322, indicating manufacturing of other fabricated metal products, and is structured as a subcontract under the Defense Logistics Agency, operating within the Department of Defense framework to support critical aircraft readiness and sustainment initiatives.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Cybersecurity and CUI Protection (NIST SP 800-171)The contract requires the implementation and ongoing maintenance of a comprehensive cybersecurity program aligned with NIST SP 800-171 Rev 1 standards, specifically designed to protect Controlled Unclassified Information. A core deliverable is the development of a fully documented System Security Plan that outlines policies, procedures, and controls to ensure compliance across all applicable security requirements. The contractor must also achieve and maintain the necessary assessment scores to validate adherence to the NIST framework, demonstrating that all required safeguarding measures are effectively in place and operational. This is a small business set-aside subcontract under the SBA’s Total Small Business Set-Aside program, with the NAICS code 541512 indicating it pertains to computer systems design services. The solicitation, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, is open for responses until August 24, 2026, with performance expected to occur at an unlisted location. The successful vendor must demonstrate expertise in federal cybersecurity compliance, particularly in managing CUI within DoD contractor environments, and be prepared to support continuous monitoring, documentation, and assessment activities required to sustain certification under NIST SP 800-171 Rev 1.

Computer Systems Design Services

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Export Control and Technical Data ManagementThis contract requires the management of technical data under International Traffic in Arms Regulations and Export Administration Regulations, ensuring strict adherence to U.S. export control standards. The contractor must implement and maintain procedures to safeguard controlled technical information, prevent unauthorized access or disclosure, and comply fully with DFARS clause 252.225-7048 regarding foreign person access to restricted data. Additionally, the contractor must uphold compliance with the U.S. and Canada Joint Certification Program to facilitate secure cross-border collaboration on defense-related technical matters. The contract is designated as a total small business set-aside under FAR 19.5, making it available exclusively to small businesses as defined by the Small Business Administration. It falls under NAICS code 541611 for management and scientific consulting services and is issued under the Department of Defense through the ASC Supplier Oper AE and AF Division. Proposals are due by August 24, 2026, and performance will be conducted in compliance with all applicable defense and export control requirements without specified geographical limitations beyond the need to meet U.S. and Canadian regulatory obligations.

Administrative Management and General Management Consulting Services

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Packaging, Marking, and Labeling (MIL-STD-129 & MIL-STD-130N)The contract requires the packaging, marking, and labeling of shroud assemblies in strict compliance with MIL-STD-129 and MIL-STD-130N standards, ensuring all items are properly identified with barcoding that includes both Data Matrix and linear codes. Hazardous material handling procedures must be followed if applicable, and all assemblies must be palletized according to the RP001 specification to meet military logistics requirements. This subcontract is a total small business set-aside under the SBA program, with the NAICS code 561990 indicating it falls under other support services. The solicitation was posted on July 23, 2026, with a response deadline of August 24, 2026, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The work is to be performed under the terms of a U.S. government subcontract, and all activities must align with federal acquisition regulations governing defense contracting.

All Other Support Services

POSTED

about 6 hours ago

DEADLINE

in about 1 month

First Article Testing (FAT) and Quality ComplianceThe contract requires execution of First Article Testing in strict accordance with the E08 FIRST ARTICLE TESTING REQUIREMENTS (MAR 2025) to verify full conformance to all specified technical data and to provide documented evidence of consistent and controlled manufacturing processes. This testing must demonstrate that the initial production units meet every design, performance, and quality criterion outlined in the technical documentation, ensuring that the supplier’s processes are capable of reproducibly delivering compliant products at volume. This is a subcontract issued under a Total Small Business Set-Aside by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, classified under NAICS code 541330, and is open exclusively to small businesses. The solicitation was posted on July 23, 2026, with a response deadline of August 24, 2026. The place of performance and point of contact details are not specified, but the full solicitation can be accessed via the provided DIBBS link, and all submissions must comply with the requirements for certification of process control and technical compliance as mandated by the referenced E08 standard.

Engineering Services

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Welding Services (Class B per BAC 5975)The contract requires the performance of Class B welding on a shroud assembly in strict accordance with the BAC 5975 standard, with a specified weld size of 3/16 inch and full adherence to aerospace quality requirements. This work demands precision and compliance with industry-specific technical standards to ensure structural integrity and performance under high-stress aerospace conditions. The solicitation is designated as a total small business set-aside under SBA regulations, limiting participation to qualified small businesses as defined by FAR 19.5, and is classified under NAICS code 332420 for fabricated metal product manufacturing. The contract is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV and is open for response until August 24, 2026, with the posting date listed as July 23, 2026. While specific location details for performance or point of contact are not provided, the work is expected to be executed in alignment with defense supply chain protocols and quality assurance frameworks. Interested parties must access the full solicitation through the provided DIBBS link to review submission requirements, evaluation criteria, and any additional technical specifications not outlined in the summary.

Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

DUCT ASSEMBLY, AIR CONDITIONING-HEATING, AThe contract is for the procurement of 40 units of DUCT ASSEMBLY, AIR CONDITIONING-HEATING, A (NSN 1660-00-221-1176) under an Indefinite Quantity Contract (IDIQ) awarded through a sealed bid process, with a maximum potential value of $4,999,999.99 and a minimum guaranteed delivery of 10 units per order. Delivery is required within 350 days after the issue of a delivery order, and the contract is governed by a firm-fixed-price structure. Technical and quality requirements are dictated by the DLA Master List of Technical and Quality Requirements, with specific mandates including DLA Packaging Requirements (RP001), Inspection and Acceptance at Origin (RQ009), Removal of Government Identification from Non-Accepted Supplies (RQ011), and Export Control of Technical Data (RQ032). The technical data involved is subject to ITAR or EAR regulations, restricting access to contractors approved under the US/Canada Joint Certification Program who have completed mandatory DLA export control training and compliance questionnaires, with DFARS 252.225-7048 fully applicable. Packaging and labeling must conform to MIL-STD-129 and ASTM D3951, with barcoding per QUP:001 standards. Quality assurance must comply with ISO 9001:2015, and inspections are conducted at origin with the government retaining final acceptance authority. The contract requires adherence to FAR and DFARS clauses including 52.246-2, 52.246-11, and 52.209-6, with deviations noted for certain subcontracting provisions. Cybersecurity obligations under DFARS 252.204-7012 and 7020 mandate NIST SP 800-171 compliance, cyber incident reporting within 72 hours, and submission of assessment results through SPRS. Invoicing is exclusively through WAWF, governed by FAR 252.232-7006, and payment is processed via DoDAAC. Evaluation for award is based on best value trade-off, with past performance—particularly SPRS assessments and historical quality and delivery data—considered significantly more important than other non-price factors, which are approximately equal in

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

PANEL, STRUCTURAL, AIThe contract solicitation SPE4A7-26-R-0697 is for the procurement of 40 units of a Structural AI Panel with part number 34-1263-522 and NSN 1560-00-874-6326, subject to a total small business set-aside under FAR 19.5. Delivery is required within 208 days after contract award, and the solicitation is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size. The item is subject to stringent compliance requirements including Cybersecurity Maturity Model Certification (CMMC) Level 2, as the contractor must be a certified third-party assessment organization. Technical data associated with the item is subject to export control under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring DLA-approved contractors to hold JCP certification, complete mandatory training, and obtain prior authorization for access. The supplier must adhere to DLA packaging standards, perform inspection and acceptance at origin, and manage configuration changes through formal engineering change proposals for any deviations or waivers. Components within the panel must be sourced from Qualified Products Lists or Qualified Manufacturers Lists as specified in procurement note H02. Physical identification of the item must be marked per RQ017, though unique item identification is waived per customer request under DFARS 252.211-7003. Removal of government identification from non-accepted supplies is required, and source approval documentation must be submitted with full supporting information. The solicitation closes on August 24, 2026, with responses due by that date, and all contractors must comply with DFARS 252.225-7048 regarding export-controlled technical data handling, ensuring no unauthorized disclosure occurs to foreign entities or subsidiaries.

Fabricated Structural Metal Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

CYLINDER AND PISTON ASSEMBLY, LANDING GEAThe contract is for the procurement of 40 units of a cylinder and piston assembly, identified by NSN 1620-01-623-9220, under solicitation SPE4A7-26-R-0681, with a delivery requirement of 138 days after award. The technical and quality specifications for this item are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the scale of the acquisition. The item is subject to export control under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons—regardless of location—including foreign nationals employed by U.S. companies or subsidiaries—is restricted without prior authorization from the Department of State or Commerce. Compliance with DFARS 252.225-7048 is mandatory, and access to this controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed required DLA training and questionnaire and obtained formal approval. Packaging must adhere to DLA standards, inspection and acceptance occur at origin, and government identifiers must be removed from non-accepted items. The solicitation was posted on July 23, 2026, with a response deadline of August 24, 2026, and is managed by the Department of Defense through the ASC Supplier Oper AE and AF Division.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

SHROUD ASSEMBLY, GENERATORThe contract is for the procurement of 40 units of a Shroud Assembly, Generator with the NSN 1560-00-829-9365, under solicitation SPE4A7-26-R-0701. The delivery schedule requires fulfillment within 232 days after award, and the solicitation is designated as a Total Small Business Set-Aside, indicating exclusive eligibility for small business concerns. Engineering requirements specify weld class 'B' per BAC 5975 with an acceptable weld size of 3/16 inch, as detailed in drawing 008299365. Compliance is mandated with all technical and quality requirements listed in the DLA Master List under R and I identifiers, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must adhere to DLA standards, and inspection and acceptance are to occur at the supplier’s origin. Government identification must be removed from any non-accepted items. Although Item Unique Identification is not required, DFARS 252.211-7003(c)(1)(i) governs its omission. Technical data associated with this item is subject to export control under ITAR or EAR, restricting all disclosures to foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to controlled data is limited to contractors approved by DLA, holding a valid US/Canada Joint Certification Program certification, and having successfully completed mandatory export control training and questionnaire. The contracting activity falls under the Department of Defense, specifically the ASC Supplier Operations AE and AF Division.

Fabricated Structural Metal Manufacturing

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Inspection and Acceptance ServicesThe contract requires the performance of inspection and acceptance services for delivered supplies at their destination, fully aligned with the Federal Acquisition Regulation clause FAR 52.246-2, which mandates rigorous evaluation to confirm that all items meet the specified quality standards and contractual requirements. The work involves verifying compliance at the point of delivery, ensuring that supplies are free from defects, properly documented, and functionally suitable for intended use, with no tolerance for nonconformance. This is a subcontract under NAICS code 541340, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a short solicitation window closing just two days after posting on July 24, 2026. The place of performance is not specified, indicating the work may occur at multiple locations dictated by delivery points, and the contract is solicited via the DIBBS platform, requiring prompt submission prior to the deadline. All services must be executed with precision to meet Department of Defense standards without deviation.

Drafting Services

POSTED

DEADLINE

in about 18 hours

Packaging and Marking Services for Military ShipmentThe contract requires the provision of packaging and marking services for military shipments that strictly comply with MIL-STD-129 standards, ensuring all items are properly labeled with human-readable information and embedded Data Matrix barcodes to support accurate tracking and inventory management across military logistics networks. This subcontract is specifically designed to meet the Department of Defense’s requirements for uniformity, durability, and machine readability in packaging, enabling seamless handling, storage, and redistribution of materiel under operational conditions. The solicitation is open as a subcontract under NAICS code 323110, with a tight response window closing just two days after posting on July 24, 2026. The contracting office, under the ASC SUPPLIER OPER AE AND AF DIV, is actively seeking qualified vendors to fulfill this urgent logistical need, though no specific place of performance or set-aside details are provided. Participation is governed by the federal procurement platform DIBBS, and successful bidders must ensure full adherence to military packaging specifications to maintain supply chain integrity and compliance with DoD logistics protocols.

Commercial Lithographic Printing

POSTED

DEADLINE

in about 18 hours

Supply Chain Traceability DocumentationThe contract requires full supply chain traceability documentation in accordance with clause C03 to ensure strict compliance with defense sourcing standards and counterfeit part prevention protocols. All documentation must accurately and comprehensively track the origin, handling, and movement of components throughout the supply chain, with verifiable records that meet Department of Defense integrity requirements for critical defense systems. Failure to provide complete and accurate traceability will result in noncompliance and potential contract termination. Submitted by subcontractors, this solicitation is classified under NAICS code 541611 and is actively open for response until July 24, 2026, with a posting date of July 22, 2026. The contracting entity is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and all deliverables must align with federal defense procurement standards. The place of performance and point of contact details are not specified, but all submissions must be made through the designated DIBBS portal linked in the contract data.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

in about 18 hours