Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Machining and Finishing (Post-Casting)

Active

Federal

Response Deadline09/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Department of Defense ASC Commodities Division involves the final machining and finishing of cast Bell Crank part number 458-58508-1 for DLA aerospace projects. The scope of work includes milling, drilling, deburring, and surface finishing to ensure the component meets specific final dimensions and tolerances. All work must be performed using precision CNC mills, lathes, and CMM inspection tools while adhering to Critical Application Item quality control standards to deliver the finished Bell Crank under NSN 3040011883458. The project is categorized under NAICS code 332721 and is to be performed at Tinker AFB. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

General Info

DoD subcontract for machining and finishing Bell Crank part 458-58508-1 at Tinker AFB.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332721 - Precision Turned Product ManufacturingView NAICS

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-29UF.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BELL CRANK

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 15

subcontract

Response DeadlineSep 23

Submission deadline

Response Deadline

09/23/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs final machining and finishing for prime contractors on DLA aerospace projects. Executes milling, drilling, deburring, and surface finishing on cast Bell Crank P/N 458-58508-1 to meet final dimensions and tolerances. Utilizes precision CNC mills, lathes, and CMM inspection tools. Adheres to Critical Application Item quality control standards. Delivers finished Bell Crank (NSN 3040011883458).

Similar Contracts

Same NAICS industry code

Machine Bolt Supply (NSN 5306007012367)This subcontract with the Department of Defense ASC Commodities Division involves the manufacture and supply of machine bolts under NSN 5306007012367 for prime contractors fulfilling DLA supply contracts. The provider is responsible for sourcing or producing bolts that adhere to exact military specifications and performing all necessary quality control to ensure the products meet destination inspection and acceptance requirements. Compliance with the Hazard Communication Standard 29 CFR 1910.1200 is mandatory, and the final delivery must match the physical quantity specified in CLIN 0001. The project is categorized under NAICS code 332721 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by September 23, 2026, following the posting date of September 15, 2026.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

Manufacturing of Special Shaped SpacersThis subcontract opportunity with the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, involves the manufacturing of precision-machined or stamped Special Shaped Spacers. The contractor is required to fabricate spacers for NSN 5365015891657 according to a specific technical data package and must adhere to the quality requirements outlined in technical document RA001. Production will utilize CNC mills, lathes, or metal stamping presses to ensure all finished products meet exact technical specifications. The project is designated as a Total Small Business Set-Aside under FAR 19.5 and falls under NAICS code 332721. Performance of the contract will take place in Texarkana, Texas. Interested parties must respond by September 23, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

Valve Spring Assembly (CRES) SupplyThis subcontract under the Maritime Supply Chain of the Department of Defense involves the supply of seven valve spring assemblies for prime contractors fulfilling DLA requirements. The assemblies must be manufactured or sourced from Corrosion Resistant Steel and meet a specific pressure range of 80 to 125 as defined by NSN 4820010518464. Compliance requirements include ensuring all hardware is mercury-free and strictly adhering to RP001 DLA Packaging Requirements. The contract falls under NAICS code 332721, with a response deadline of September 28, 2026, and performance located in FPO 96349.

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

Piston Pin Supplier/ManufacturerThis subcontract involves the supply of seven precision-machined piston pins for prime contractors supporting Department of Defense DLA supply contracts. The manufacturer is responsible for producing or sourcing pins for part 7018316576, utilizing precision grinding and machining equipment to ensure all units meet the dimensional accuracy and material strength standards defined in the DLA Master List of Technical and Quality Requirements. The contract requires the provision of certifications of conformance to verify quality standards. Performance for this requirement is based in Chambersburg, Pennsylvania, under NAICS code 332721. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026, through the Land Supply Chain ESOC Buys agency.

LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 14 hours ago

DEADLINE

Supply of Machine Bolts (NSN 530600137760)This subcontract involves the manufacture or sourcing of 1,867 machine bolts under NSN 530600137760 for prime contractors supporting DLA Aviation supply contracts. The items must be produced using steel or alloy materials according to technical data sheets and must meet Engineering Support Activity acceptability standards. To ensure quality and longevity, military packaging is required to prevent corrosion. The contract is managed by the Department of Defense through the ASC Commodities Division and is subject to compliance with FAR 52.222-50 and 52.223-3. Delivery of the 1,867 units will be handled via FOB Origin, with the place of performance located in New Cumberland, Pennsylvania. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026, under NAICS code 332721.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

Supply of Critical Application Shim (P/N 203894-01)This subcontract involves the supply of precision shims, specifically part number 203894-01, for prime contractors working on Department of Defense projects via the Land Supply Chain agency. The manufacturer must source or produce the shims according to TDP Rev A Gen 1 and Reference Revision NR DTD specifications. All deliverables must adhere to Critical Application Item quality controls and be packaged in accordance with RP001 DLA Packaging Requirements for Procurement. The contract is categorized under NAICS code 332721 and is to be performed in Phoenix, Arizona. Successful delivery requires the submission of physical shims along with the necessary receiving reports processed through the Wide Area Workflow (WAWF) system. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026.

LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

Quick Release Pin Manufacturing (CSI)This subcontract involves the manufacture of high-precision quick release pins for prime contractors supporting the Department of Defense ASC Commodities Division. The work is performed at Robins Air Force Base and requires strict adherence to the DLA Master List of Technical and Quality Requirements and Air Force Critical Safety Item standards. The manufacturer must utilize precision CNC machining and specialized quality inspection tools to ensure all CSI tolerances are met while maintaining compliance with DFARS 252.204-7012. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332721. Interested parties must respond by September 23, 2026. The primary objective is the delivery of finished pins that meet all specified technical requirements for use in critical safety applications.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

Machine Bolt Manufacturing and SupplyThis subcontract for Machine Bolt Manufacturing and Supply, issued by the Department of Defense ASC Commodities Division, involves the production of machine bolts for prime contractors fulfilling DLA supply contracts. The manufacturer must produce bolts according to the technical and quality specifications defined by R or I numbers in the DLA Master List, utilizing industrial threading, heading, and finishing machinery. To be eligible, the provider must hold quality certification to SAE AS9003 or ISO 9001 and perform inspection and acceptance at origin in accordance with RQ009. The performance of this contract is based in New Cumberland, Pennsylvania, with a response deadline of September 23, 2026.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

Manufacturer of Packing with RetainerThis subcontract involves the manufacture of packing with retainer assemblies for prime contractors supporting Department of Defense supply contracts through the Land Supplier Opns Vehicle Spt agency. The selected manufacturer will be responsible for fabricating parts that comply with NSN 010986006, adhering strictly to RA001 technical and quality requirements as well as the DLA Master List of Technical and Quality Requirements. Production must be carried out using additive manufacturing or precision machining in accordance with L31 standards. The project is categorized under NAICS code 332721 and will be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by September 28, 2026, following the posting date of September 15, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 14 hours ago

DEADLINE

Precision Tube Assembly FabricationThis subcontract for the Department of Defense Fluid Handling Division involves the fabrication of metal tube assemblies for prime contractors. The work requires manufacturing assemblies according to TDP Rev B Gen 3 and drawing NR 81205 35-4382 Rev G, utilizing precision bending and forming equipment. All production must adhere to BAC5001-1, BAC5001-2, BAC5001-3, BAC5300, and BAC5300-2 standards. Completed parts must be marked in accordance with MIL-STD-130 using AS478-30 and AS478-35 methods. The performance of this contract is located in New Cumberland, Pennsylvania, under NAICS code 332721. The response deadline for this opportunity is September 28, 2026.

FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

Supply of Pipe Plugs (NSN 4730016027122)This subcontract involves the procurement of 44 specialized pipe plugs meeting NSN 4730016027122 specifications for prime contractors supporting DLA Land and Maritime supply contracts. The selected supplier must ensure all items are manufactured and delivered to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. The contractor is required to adhere to strict packaging and marking standards, specifically RP001, MIL-STD-2073-1E, and MIL-STD-129. Additionally, the supplier must comply with 29 CFR 1910.1200 for any applicable hazardous material labeling. This opportunity falls under NAICS code 332721 and is managed by the Department of Defense Maritime Supply Chain.

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

Piston Rod Fabrication and SupplyThis subcontract under the Nuclear Reactor Program involves the fabrication and supply of 16 precision-machined piston rods for prime contractors. The work must be performed in accordance with TDP Rev C Gen 3 and QAP 16236 SQAP011574940CFAT Revision C, with welding and marking adhering to specific technical data and MIL-STD-129 Special Marking Code ZZ. The project requires certified welding procedures and Level III inspection certifications, with final deliverables including KFAT results, PTI reports, and COQC documentation. The contract is a total small business set-aside under NAICS code 332721, managed by the Department of Defense. Performance will take place in San Diego, California. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

NUCLEAR REACTOR PROGRAM

POSTED

about 14 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Precision Thread Gauging and Inspection ServicesThe Precision Thread Gauging and Inspection Services subcontract, issued by the Department of Defense ASC Commodities Division, involves performing dimensional conformance testing and quality assurance inspections for prime contractors delivering DLA supply contracts. The scope of work focuses on inspecting Class 3A and 3B threads using System 22 of FED-STD-H28/20 and verifying inspection results according to MIL-STD-1916. The service provider is required to use calibrated thread gauges and measurement tools compliant with FED-STD-H28/20 to deliver detailed inspection reports and certifications of conformance. This project falls under NAICS code 541380 and is to be performed in New Cumberland, Pennsylvania, with a response deadline of September 23, 2026.

Testing Laboratories and Services

POSTED

about 14 hours ago

DEADLINE

Socket Head Cap Screw Supplier/ManufacturerThis subcontract opportunity with the Department of Defense ASC Commodities Division involves the manufacture and supply of socket head cap screws for prime contractors fulfilling DLA supply contracts. The supplier must ensure all screws conform to Class 3A and 3B thread specifications and adhere to strict quality standards, including dimensional conformance inspections per System 22 of FED-STD-H28/20 and identification marking according to MIL-STD-130N. Quality assurance must be conducted per MIL-STD-1916, with all finished products delivered alongside the necessary inspection certifications. The contract falls under NAICS code 332722 and specifies a place of performance in New Cumberland, Pennsylvania. Interested parties must respond by September 23, 2026, to the solicitation posted on September 15, 2026. The role requires the use of precision threading and gauging equipment to maintain the high technical standards required for these military-grade components.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply of Liquid Sight Indicators (NSN 014633075)This subcontract through the ASC Commodities Division of the Department of Defense involves the supply of three specialized liquid sight indicators identified by NSN 014633075 and FSC 6680. The provider is responsible for manufacturing or sourcing the hardware and must include all necessary Safety Data Sheets and Hazard Warning Labels for any hazardous materials. The items are to be shipped FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. This requirement falls under NAICS code 332999 and is intended for prime contractors delivering DLA Aviation supply contracts.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply of Tee Head Bolts (NSN 5306011346566)This subcontract involves the supply of 21 specialized Tee Head Bolts, identified by NSN 5306011346566, for prime contractors working on ASC Commodities Division projects under the Department of Defense. The contractor is responsible for manufacturing or sourcing the bolts and ensuring they meet strict quality and marking standards, specifically adhering to MIL-STD-129 for marking and MIL-STD-1916 or ASQ H1331 for sampling. The agreement requires full compliance with the DLA Master List of Technical and Quality Requirements, including RQ011. Performance of the contract will take place in New Cumberland, Pennsylvania, under NAICS code 332722. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

Manufacturing of Precision Ring Spacer (PN: 7018226986)This subcontract involves the manufacturing and supply of one precision Ring Spacer, part number 7018226986, for the Department of Defense under the ASC Commodities Division. The contractor is responsible for fabricating the component using precision machining equipment to meet exact government specifications and the DLA Master List of Technical and Quality Requirements. All packaging and marking must adhere to MIL-STD-129 standards. The completed Ring Spacer must be delivered within 20 days following the order. This opportunity falls under NAICS code 332999 and was posted on September 15, 2026, with a response deadline of September 23, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

ASTM D3951 Compliant Packaging and PalletizationThis subcontract with the Department of Defense ASC Commodities Division focuses on providing specialized packaging and palletization services for prime contractors delivering DLA supply contracts. The scope of work involves packaging shoulder bolts in strict accordance with ASTM D3951 and performing palletization per RP001 DLA Packaging Requirements for Procurement. The provider must ensure that the unit of issue and quantity per unit pack align with contract requirements using DLA-standard materials to ensure items are ready for shipment. The contract is categorized under NAICS code 488510 and will be performed at Robins Air Force Base. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

Freight Transportation Arrangement

POSTED

about 14 hours ago

DEADLINE

Shoulder Bolt Manufacturing (P/N ST3M497-4-16)This subcontract involves the manufacturing of shoulder bolts, specifically part number ST3M497-4-16, for prime contractors supporting DLA supply contracts. The work is performed under the Department of Defense via the ASC Commodities Division and is based at Robins Air Force Base. The manufacturer is responsible for utilizing precision machining, casting, or forging processes and custom special tooling to ensure the structural integrity of the components. All deliverables must adhere to Critical Application Item quality standards and strict technical specifications. The contract falls under NAICS code 332722 and requires the delivery of finished shoulder bolts that meet all specified technical requirements. The response deadline for this opportunity is September 23, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply of Industrial Setscrews (NSN 5305000546869)This subcontract involves the supply of industrial setscrews meeting NSN 5305000546869 specifications for prime contractors supporting the Department of Defense ASC Commodities Division. The agreement requires the delivery of 20 packages of setscrews on a FOB Destination basis, with performance taking place in New Cumberland. The supplier must adhere to RP001 DLA Packaging Requirements for Procurement and submit all receiving reports through the Wide Area Workflow system. Additionally, additive manufacturing is strictly prohibited unless prior approval is granted by the ESA.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 14 hours ago

DEADLINE

Socket Head Cap Screw SupplyThis subcontract involves the manufacture and supply of socket head cap screws for prime contractors supporting DLA Aviation ASC hardware contracts. The provider is responsible for sourcing or producing screws with specific thread protection and must ensure strict adherence to MIL-STD-129 for marking, RP001 for palletization, and IP056 for mercury-free preservation. All finished products must be packaged, marked, and delivered FOB Destination. The contract is managed by the Department of Defense under the ASC Commodities Division, with the place of performance located in New Cumberland, Pennsylvania. Operating under NAICS code 332722, the solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

DLA-Compliant Packaging and CratingThis subcontract with the Department of Defense ASC Commodities Division involves specialized packaging and labeling of hardware for prime contractors fulfilling DLA supply contracts. The service provider is responsible for packaging screw assemblies in accordance with RP001 standards, utilizing military-grade materials and moisture-barrier packaging to ensure compliance. Additionally, the contractor must apply all required military shipping labels and markings to prepare shipments for First Destination Transportation. The project is based in New Cumberland, Pennsylvania, under NAICS code 488510. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

Freight Transportation Arrangement

POSTED

about 14 hours ago

DEADLINE

Manufacture and Supply of Panel Screw Assemblies (NSN 5305010097364)This subcontract with the Department of Defense ASC Commodities Division involves the precision manufacture and supply of panel screw assemblies under NSN 5305010097364. The contractor is responsible for fabricating the components using industrial machining equipment and ensuring all items meet the DLA Master List of Technical and Quality Requirements as specified in RA001. Packaging must adhere to RP001 standards, with finished goods delivered FOB Origin from the performance location in New Cumberland. The contract falls under NAICS code 332722 and is designed to support prime contractors fulfilling DLA supply requirements.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply of Shoulder Washers (NSN 5310012091665)This subcontract through the ASC Commodities Division of the Department of Defense involves the supply of 358 shoulder washers conforming to NSN 5310012091665 specifications. The selected provider is responsible for manufacturing or sourcing the components and ensuring all items are packaged according to ASTM D3951 and marked and labeled in compliance with MIL-STD-129. The project falls under NAICS code 332722 and is to be performed in New Cumberland, Pennsylvania. Interested parties must respond by September 23, 2026, to fulfill the requirements for the prime contractor on this DLA supply contract.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS