Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Thread Gauging and Inspection Services

Active

Federal

Response Deadline09/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Precision Thread Gauging and Inspection Services subcontract, issued by the Department of Defense ASC Commodities Division, involves performing dimensional conformance testing and quality assurance inspections for prime contractors delivering DLA supply contracts. The scope of work focuses on inspecting Class 3A and 3B threads using System 22 of FED-STD-H28/20 and verifying inspection results according to MIL-STD-1916. The service provider is required to use calibrated thread gauges and measurement tools compliant with FED-STD-H28/20 to deliver detailed inspection reports and certifications of conformance. This project falls under NAICS code 541380 and is to be performed in New Cumberland, Pennsylvania, with a response deadline of September 23, 2026.

General Info

DoD subcontract for thread gauging and quality inspections in New Cumberland, Pennsylvania.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-29VK.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SCREW, CAP, SOCKET HEAD

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 15

subcontract

Response DeadlineSep 23

Submission deadline

Response Deadline

09/23/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs dimensional conformance testing and quality assurance inspections for prime contractors delivering DLA supply contracts. Inspects Class 3A and 3B threads using System 22 of FED-STD-H28/20 and verifies attribute or variable inspection results per MIL-STD-1916. Utilizes calibrated thread gauges and measurement tools compliant with FED-STD-H28/20. Delivers inspection reports and certifications of conformance.

Similar Contracts

Same NAICS industry code

Quality Assurance / Third-Party TestingThis subcontract with the Department of Defense ASC Commodities Division involves providing independent testing and certification of fasteners for prime contractors fulfilling DLA supply contracts. The scope of work includes performing material analysis, hardness testing, and dimensional inspections utilizing precision calipers and metallurgical equipment. To ensure compliance, the provider must maintain ISO/IEC 17025 certification or an equivalent quality standard and is responsible for delivering detailed test reports and Certificates of Conformance. The opportunity is categorized under NAICS code 541380 and is based in New Cumberland, Pennsylvania. Interested parties must respond by September 23, 2026, following the posting date of September 15, 2026.

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

First Article Test (FAT) ServicesThis subcontract for First Article Test (FAT) Services supports Depot Oklahoma projects by performing initial testing and validation of the first production unit for prime contractors. The scope of work involves validating material properties, dimensions, and overall performance against the technical data package specified in CLIN 0002, utilizing specialized material testing labs and metrology equipment. The final deliverable is a FAT Report and certification confirming that the item adheres to all government specifications. The project is managed by the Department of Defense for Depot Oklahoma, with the place of performance located at Tinker AFB. Interested parties must respond by September 28, 2026, under NAICS code 541380.

POSTED

about 8 hours ago

DEADLINE

Production Lot Testing and Quality Validation ServicesThis subcontract for Production Lot Testing and Quality Validation Services involves performing specialized quality conformance testing on aircraft engine parts for prime contractors supporting ASC Supplier Oper AE and AF Div projects. The scope of work includes conducting tests on random samples to validate technical and quality requirements following First Article approval, coordinating sample selection with the Quality Assurance Representative, and delivering comprehensive test results and validation reports. The project is managed by the Department of Defense and will be performed in Jacksonville, Florida. Under NAICS code 541380, the contract requires the delivery of verified quality conformance data to ensure all production lots meet the necessary technical specifications.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

First Article and Production Lot Testing (FAT/PLT)This subcontract involves providing independent laboratory testing and validation services for prime contractors supporting the Department of Defense ASC Supplier Oper OEM Division. The scope of work focuses on conducting First Article Testing and Production Lot Testing using calibrated precision measurement equipment in accordance with standard RT001. Additionally, the provider is responsible for generating documentation for Source Approval Requests per RC001 and delivering certified test reports and validation certificates. The project is categorized under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by September 23, 2026, following the posting date of September 15, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Production Lot Test (PLT) Services

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

First Article Testing and Validation ServicesThis subcontract for First Article Testing and Validation Services involves performing First Article Testing for prime contractors delivering DLA Aviation supply contracts. The scope of work focuses on validating one unit of lot/item 2935 / 12516346 by utilizing inspection equipment to verify the seals and tolerances of aviation filler caps. The contractor is responsible for coordinating approval notifications with the Contracting Officer and delivering the validated test unit and accompanying test report to Tinker AFB. The project is managed by the ASC Supplier Oper OEM Division within the Department of Defense and is categorized under NAICS code 541380. Performance of the services will take place at Hill AFB. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Quality Assurance and Certification ServicesThis subcontract for Quality Assurance and Certification Services supports the Department of Defense Nuclear Reactor Program in San Diego. The selected provider will perform independent testing, inspection, and certification for prime contractors, specifically conducting Contractor First Article Testing and generating Production Test and Inspection Reports. The scope includes executing visual inspections according to written procedures to ensure full QAP compliance, with the final delivery consisting of KFAT reports, PTI reports, and signed Certificates of Quality Compliance. The opportunity is a total small business set-aside under NAICS code 541380. Qualified candidates must provide certified quality inspectors and maintain Level III Certification. Interested parties must respond by September 23, 2026, to provide these specialized technical services.

NUCLEAR REACTOR PROGRAM

POSTED

about 8 hours ago

DEADLINE

Geotechnical and Materials Testing Services for Waterline Replacement Project in Hemet, CA

Solicitation # CIP 5661

Albert A. Webb Associates is seeking qualified small and disadvantaged business firms to serve as subconsultants for the Oakland and Santa Fe Waterline Replacement project (CIP 5661) in Hemet, California. The scope of work involves providing geotechnical and materials inspection and testing services over an estimated 210 construction working days. Key responsibilities include material and compaction testing for roadway subgrade, aggregate base, trench backfill, pipe bedding, and trench bottoms, as well as initial sampling and acceptance testing of proposed materials. The subconsultant must provide a certification memorandum signed by a professional engineer to identify any non-complying materials. This project is funded in whole or in part by a U.S. Environmental Protection Agency Community Grant, requiring strict adherence to federal flow-down provisions, including the Build America, Buy America Act and EPA Disadvantaged Business Enterprise (DBE) requirements under 40 CFR Part 33. Selected firms must comply with California prevailing wage laws, register with the Department of Industrial Relations, and maintain general liability insurance of at least $2,000,000 per occurrence. Interested firms must submit a technical proposal, a firm-fixed fee proposal, and documentation of their small or disadvantaged business certifications. Award is contingent upon the selection of Albert A. Webb Associates by the City of Hemet.

Albert A. Webb Associates

POSTED

about 9 hours ago

DEADLINE

Genomic Sequencing Services (AVITI Platform)This subcontract for the Department of Agriculture's Region 3 Southwestern Regional Office involves providing high-throughput genomic sequencing services for wheat DNA libraries on USDA Agricultural Research Service projects. Utilizing the AVITI Genomic Sequencing system, the contractor is responsible for the entire workflow from sample receipt to the delivery of raw sequence data files, including the execution of both Paired End and Single End sequencing runs. The opportunity is designated as a total Small Business Set Aside under NAICS code 541380. Performance will take place in Raleigh, North Carolina, with a response deadline of September 21, 2026.

Region 3 Southwestern Regional Office

POSTED

about 13 hours ago

DEADLINE

DNA Library Quality Control (QC) ServicesThis small business set-aside subcontract with the Department of Agriculture, Region 3 Southwestern Regional Office, involves providing quality control validation for government-constructed wheat DNA library pools. The contractor will support prime contractors on USDA Agricultural Research Service projects by performing fluorometric quantification via Qubit, Tapestation analysis for purity and size distribution, and qPCR validation. These processes ensure that 22 DNA library pools meet minimum industry sequencing-library quality control standards. The work will be performed in Raleigh, North Carolina, utilizing specialized equipment including Qubit fluorometers, Agilent TapeStation, and qPCR thermal cyclers. The final deliverable for this engagement consists of comprehensive QC validation reports for all processed library pools.

Region 3 Southwestern Regional Office

POSTED

about 13 hours ago

DEADLINE

NDT Inspection and Certification for Cannon LeversThis subcontract involves providing non-destructive testing services for manufactured cannon levers on projects at the Watervliet Arsenal for the Department of Defense. The selected contractor will perform Magnetic Particle, Dye Penetrant, or Ultrasonic testing to verify structural integrity according to specific technical requirements. Key deliverables include NDT Certification and Data Reports, as well as Certificates of Conformance for NDT Applications in compliance with DI-MISC-80678 and QAP-APPX-WVA. The opportunity is designated as a total Small Business Set Aside under NAICS code 541380. Performance will take place in Watervliet, New York. Interested parties must respond by September 29, 2026, to be considered for this specialized inspection and certification role.

POSTED

about 13 hours ago

DEADLINE

First Article Testing and Validation ServicesThis subcontract for First Article Testing and Validation Services supports prime contractors on Air Force aircraft component projects. The selected provider will develop First Article Test Plans and perform rigorous testing on samples to ensure full compliance with government qualification standards. This process involves the use of precision measurement and material testing equipment to conduct essential tensile, thermal, and chemical analyses. The primary deliverables for this engagement include a comprehensive First Article Test Plan and three validated samples. Managed by the Department of Defense through the Ok DLA Aviation At Oklahoma City, the opportunity falls under NAICS code 541380. Interested parties must submit their responses by October 15, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

about 13 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Socket Head Cap Screw Supplier/ManufacturerThis subcontract opportunity with the Department of Defense ASC Commodities Division involves the manufacture and supply of socket head cap screws for prime contractors fulfilling DLA supply contracts. The supplier must ensure all screws conform to Class 3A and 3B thread specifications and adhere to strict quality standards, including dimensional conformance inspections per System 22 of FED-STD-H28/20 and identification marking according to MIL-STD-130N. Quality assurance must be conducted per MIL-STD-1916, with all finished products delivered alongside the necessary inspection certifications. The contract falls under NAICS code 332722 and specifies a place of performance in New Cumberland, Pennsylvania. Interested parties must respond by September 23, 2026, to the solicitation posted on September 15, 2026. The role requires the use of precision threading and gauging equipment to maintain the high technical standards required for these military-grade components.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Liquid Sight Indicators (NSN 014633075)This subcontract through the ASC Commodities Division of the Department of Defense involves the supply of three specialized liquid sight indicators identified by NSN 014633075 and FSC 6680. The provider is responsible for manufacturing or sourcing the hardware and must include all necessary Safety Data Sheets and Hazard Warning Labels for any hazardous materials. The items are to be shipped FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. This requirement falls under NAICS code 332999 and is intended for prime contractors delivering DLA Aviation supply contracts.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Tee Head Bolts (NSN 5306011346566)This subcontract involves the supply of 21 specialized Tee Head Bolts, identified by NSN 5306011346566, for prime contractors working on ASC Commodities Division projects under the Department of Defense. The contractor is responsible for manufacturing or sourcing the bolts and ensuring they meet strict quality and marking standards, specifically adhering to MIL-STD-129 for marking and MIL-STD-1916 or ASQ H1331 for sampling. The agreement requires full compliance with the DLA Master List of Technical and Quality Requirements, including RQ011. Performance of the contract will take place in New Cumberland, Pennsylvania, under NAICS code 332722. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

DLA-Compliant Packaging and CratingThis subcontract with the Department of Defense ASC Commodities Division involves specialized packaging and labeling of hardware for prime contractors fulfilling DLA supply contracts. The service provider is responsible for packaging screw assemblies in accordance with RP001 standards, utilizing military-grade materials and moisture-barrier packaging to ensure compliance. Additionally, the contractor must apply all required military shipping labels and markings to prepare shipments for First Destination Transportation. The project is based in New Cumberland, Pennsylvania, under NAICS code 488510. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

Freight Transportation Arrangement

POSTED

about 8 hours ago

DEADLINE

Manufacture and Supply of Panel Screw Assemblies (NSN 5305010097364)This subcontract with the Department of Defense ASC Commodities Division involves the precision manufacture and supply of panel screw assemblies under NSN 5305010097364. The contractor is responsible for fabricating the components using industrial machining equipment and ensuring all items meet the DLA Master List of Technical and Quality Requirements as specified in RA001. Packaging must adhere to RP001 standards, with finished goods delivered FOB Origin from the performance location in New Cumberland. The contract falls under NAICS code 332722 and is designed to support prime contractors fulfilling DLA supply requirements.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Shoulder Washers (NSN 5310012091665)This subcontract through the ASC Commodities Division of the Department of Defense involves the supply of 358 shoulder washers conforming to NSN 5310012091665 specifications. The selected provider is responsible for manufacturing or sourcing the components and ensuring all items are packaged according to ASTM D3951 and marked and labeled in compliance with MIL-STD-129. The project falls under NAICS code 332722 and is to be performed in New Cumberland, Pennsylvania. Interested parties must respond by September 23, 2026, to fulfill the requirements for the prime contractor on this DLA supply contract.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of NAS1189 Machine ScrewsThis subcontract through the Department of Defense ASC Commodities Division requires the supply of 89 aerospace-grade machine screws, specifically part number NAS1189E4P8LK. The contractor must ensure all products adhere to NAS1189 Revision 16 and NAS4002 Revision 12, with marking and packaging performed according to MIL-STD-129. The provider must maintain quality systems compliant with SAE AS9003 or ISO 9001 and ensure full DFARS Buy American compliance. Performance of the contract will take place in New Cumberland, Pennsylvania, with a response deadline of September 23, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Open End WrenchesThis subcontract, issued by the ASC Commodities Division of the Department of Defense, requires the supply of 11 open end wrenches for prime contractors supporting DLA Aviation supply contracts. The provider must source or manufacture wrenches that match NSN 5120016001274 and strictly adhere to the DLA Master List of Technical and Quality Requirements to ensure all materials conform to the associated technical specifications. The opportunity was posted on September 15, 2026, with a response deadline of September 23, 2026. The contract falls under NAICS code 423830 and specifies New Cumberland, Pennsylvania, as the place of performance.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 8 hours ago

DEADLINE

Supply of Continuous Thread Studs (NSN 5307006376463)This subcontract involves the manufacture or sourcing of 78 units of continuous thread studs, identified by NSN 5307006376463, to support prime contractors delivering for the ASC Commodities Division of the Department of Defense. The supplier must ensure all items comply with Commodity Specification IP056 regarding the prohibition of mercury. The contract requires strict adherence to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking, with palletization following RP001 standards. All 78 units are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California.

Glass Container Manufacturing

POSTED

about 8 hours ago

DEADLINE

Defense-Standard Packaging and Shipping ServicesThis subcontract for Defense-Standard Packaging and Shipping Services supports the ASC Commodities Division within the Department of Defense. The contractor is responsible for providing specialized military packaging and logistics for prime contractors, specifically involving the delivery of 368 properly packaged and palletized units to DLA Distribution Depot Hill. All work must be performed at Hill AFB and adhere to strict technical standards, including ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 561910. Interested parties must respond by September 23, 2026, following the posting date of September 15, 2026.

Packaging and Labeling Services

POSTED

about 8 hours ago

DEADLINE

Supply of Self-Locking Blind Nuts (NAS1734-4L2P)This subcontract involves the supply of 368 self-locking blind nuts, specifically NAS1734-4L2P hardware, for prime contractors working on ASC Commodities Division projects under the Department of Defense. The contractor is responsible for manufacturing or sourcing the nuts in accordance with NAS1734 and TDP Rev D Gen 4, while ensuring all marking adheres to MIL-STD-130N and the DLA Master List of Technical and Quality Requirements for Critical Application Items. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332722, with the place of performance located at Hill AFB. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

Military Grade Packaging and Marking ServicesThe Military Grade Packaging and Marking Services subcontract, issued by the Department of Defense ASC Commodities Division, requires specialized packaging, preservation, and marking of hardware for prime contractors fulfilling DLA supply contracts. The service provider must ensure all work adheres to strict standards, including RP001 and MIL-STD-2073-1E for packaging, MIL-STD-129 for shipment marking, and 29 CFR 1910.1200 for hazardous materials labeling. The final deliverable consists of unit and intermediate containers that are properly labeled and ready for shipment. This opportunity falls under NAICS code 561990 and is to be performed in New Cumberland, Pennsylvania. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

All Other Support Services

POSTED

about 8 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS