This Subcontract opportunity from Department Of Defense was posted on July 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Precision Machining and Metal Fabrication Services

Closed

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332320

SBIR / STTR

Ruggedized Electronics and Instrument PackagingThis subcontract, issued by the NASA SBIR/STTR Program, focuses on the design and fabrication of aerospace-grade electronic interfaces and ruggedized enclosures. The primary objective is to develop hardware capable of maintaining reliable operation within the demanding conditions of dynamic flight environments. The opportunity is designated as a Total Small Business Set-Aside, specifically targeting firms with fewer than 500 employees under the SBIR/STTR mandate. Performance for this contract is centered in Cleveland, Ohio, under NAICS code 332320.

NASA SBIR/STTR Program

POSTED

DEADLINE

Electromechanical Controller Supply (Hoist Controller)This subcontract, issued by the Defense Logistics Agency under the Department of Defense, concerns the supply of a precision electromechanical hoist controller identified by NSN 6110015351641. The procurement is managed under CLIN 2818 and falls under NAICS code 332320. The contractor is required to ensure full compliance with all specified technical requirements, as well as strict adherence to packaging and marking standards. The contract was posted on August 17, 2026, and is associated with the award record SPE7LX21D0081.

Defense Logistics Agency

POSTED

DEADLINE

Precision Machined Bracket FabricationThis subcontract with the Defense Logistics Agency under the Department of Defense involves the manufacture of 62 precision-machined military brackets. The project requires strict adherence to technical specifications, quality assurance, and comprehensive traceability to ensure successful integration into defense systems. The contract is categorized under NAICS code 332320 and was posted on August 17, 2026. It focuses on high-precision fabrication standards necessary for military-grade hardware, emphasizing the critical nature of the components for defense applications.

Defense Logistics Agency

POSTED

DEADLINE

Aircraft Stiffener SupplyThe contract pertains to the manufacture and supply of aircraft structural stiffeners as specified in the contract deliverables and CLINs, under a subcontract arrangement issued by the Defense Logistics Agency through the Department of Defense. The work is classified under NAICS code 332320, which aligns with aircraft parts and auxiliary equipment manufacturing, indicating the technical nature of the components to be produced. The contract was posted on August 5, 2026, and is administratively linked to the award number SPE4AX24D9408 with delivery order SPE4AX26F329E and contract number 87, indicating it is part of a broader procurement effort. While no specific place of performance or point of contact is provided, the scope implies direct support to defense aviation systems, with production requirements aligned to stringent military specifications. The contract does not specify a set-aside type, suggesting it is open to any qualified contractor.

Defense Logistics Agency

POSTED

DEADLINE

Aircraft Fluid System Duct AssemblyThe contract entails the fabrication and assembly of fluid system ducts for aircraft, covering critical components such as air conditioning, fuel, and hydraulic lines, all constructed from corrosion-resistant materials to ensure durability under extreme operational conditions. Precision welding techniques are required to meet stringent aerospace standards, ensuring leak-proof, high-integrity connections that maintain system reliability in demanding environments. The work is classified under NAICS code 332320, indicating a focus on aerospace product and part manufacturing, and is structured as a subcontract under the Department of Defense’s Defense Logistics Agency. Performance is expected to align with military and industry specifications for safety, quality, and material compliance, though the exact location of performance and point of contact are not specified. The solicitation was posted on August 5, 2026, and is linked to award S4AX26F329F under the base contract SPE4AX24D9408.

Defense Logistics Agency

POSTED

DEADLINE

Component Manufacturing for P/N: 56220-000The contract is for the production of high-value components or sub-assemblies associated with part number 56220-000, involving precision machining, sheet metal fabrication, or structural assembly processes. It is categorized as a subcontract under the NAICS code 332320, indicating it falls within the scope of forgings and stampings manufacturing. The work is being managed by the Defense Logistics Agency under the Department of Defense, with the solicitation posted on August 4, 2026. While specific performance location details are not provided, the contract is tied to a defense-related logistical framework and requires adherence to high-quality standards typical of military-grade component manufacturing. The contract number and delivery information are accessible through the DIBBS system, ensuring traceability and compliance within DoD procurement channels.

Defense Logistics Agency

POSTED

DEADLINE

Precision Electrical Connector Manufacturing & SupplyThe contract involves the manufacture and supply of four precision electrical coupling nuts identified by NSN 5935016536928, aligned with military specifications MS3186G and MIL-DTL-26482J, ensuring compliance with rigorous defense standards for performance and durability. These components are critical for reliable electrical connectivity in military systems and must meet exacting tolerances and material requirements dictated by the referenced military standards. The contract is structured as a subcontract under the broader procurement framework managed by the Defense Logistics Agency, part of the Department of Defense, with the NAICS code 332320 indicating classification under other electronic component manufacturing. The award was posted on August 3, 2026, and the place of performance and specific delivery location are not designated beyond the overarching agency jurisdiction. The contract is administered through the DLA’s electronic procurement system, with the official record accessible via the provided DIBBS link, ensuring transparency and traceability in fulfillment and delivery.

Defense Logistics Agency

POSTED

DEADLINE

Welding and Metal Fabrication ServicesThe contract entails the structural welding and metal fabrication of housings and brackets specifically designed for damper units, utilizing TIG and MIG welding techniques to ensure precision and durability. Post-weld finishing will be performed to meet required mechanical and surface standards, ensuring the final components are fit for high-performance applications within demanding operational environments. The work falls under NAICS code 332320, classifying it as metal fabrication services, and is structured as a subcontract under the Department of Defense through the Defense Logistics Agency. The solicitation was posted on July 21, 2026, with no set-aside designation specified, indicating it is open to all qualified contractors. Performance location details are not provided, and no point of contact information is listed, but the contract is accessible via the DIBBS portal under identification SPE4A626P9869. The nature of the work suggests the need for certified welders with experience in aerospace or defense-grade metal assembly, and compliance with military or industrial quality standards is implied through the contract's association with the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Manufacture of Aircraft Rib and Stiffener ComponentsThe contract entails the precision machining, forming, and assembly of structural aircraft components, specifically ribs and stiffeners made from metal alloys, identified by NSN 1560-01-726-0639. These parts are critical to airframe integrity and must meet exacting aerospace standards for dimension, material composition, and finish. The work falls under NAICS code 332320, indicating it is a specialty machining and metal fabrication task performed under a subcontract arrangement, though the prime contractor or direct customer is not specified. The contract was posted on July 21, 2026, and is managed by the Defense Logistics Agency under the Department of Defense. While no specific performance location or point of contact is provided, the components are intended for military aircraft systems and must comply with all applicable defense quality and delivery requirements. The absence of a set-aside designation suggests the opportunity is open to all qualified vendors, and the associated award reference number is SPE4A625PU828.

Defense Logistics Agency

POSTED

DEADLINE

Precision Machining and Truss Assembly FabricationThe contract for Precision Machining and Truss Assembly Fabrication encompasses the manufacture of critical truss components through precision CNC machining, welding, heat treatment, and final assembly, all performed to stringent aerospace and military specifications. The work is subcontracted under the Department of Defense, with the Defense Logistics Agency as the overseeing organization, ensuring compliance with defense-grade quality and performance standards. The North American Industry Classification System code 332320 confirms the nature of the work as metal forging and stamping, with an emphasis on precision fabrication for defense applications. Performance of the contract is expected to occur under the regulatory framework of federal defense procurement, though specific location details are not provided. The solicitation was posted in July 2026 and is identified by the contract number SPE4A726P5566, indicating it is part of a larger defense acquisition initiative. The components produced will be integral to structural systems requiring high reliability, dimensional accuracy, and material integrity under extreme operational conditions.

Defense Logistics Agency

POSTED

DEADLINE

Specialized Welding and Metal Assembly ServicesThe contract awards specialized welding and metal assembly services for the production of the Control Tube Assembly, focusing on sub-tier operations that involve joining precision metal components using certified processes and rigorous inspection protocols. The work demands adherence to exacting industry standards to ensure structural integrity and functional reliability, with all procedures required to be performed by qualified personnel under validated methods. Performed under the North American Industry Classification System code 332320, this subcontract is managed by the Defense Logistics Agency under the Department of Defense and is intended for performance within a secure, controlled manufacturing environment. The contract supports critical defense infrastructure and requires strict compliance with quality control measures throughout fabrication, with no set-aside status specified. The award is linked to a specific delivery order issued under the broader procurement vehicle SPE4A126F0626 and referenced under contract SPE4A123G0021.

Defense Logistics Agency

POSTED

DEADLINE

Precision Welding ServicesPrecision welding services are contracted for high-integrity TIG and laser welding of thin-wall superalloy components on turbine duct assemblies, with strict requirements for dimensional stability and minimal thermal distortion. The work demands fully qualified welding procedures, certified personnel, and mandatory post-weld heat treatment to ensure metallurgical integrity and performance under extreme operational conditions. All activities must comply with defense-grade specifications and are performed under the authority of the Department of Defense through the Defense Logistics Agency, with execution tied to the contract SPE4A125G0027 and delivery order SPE4A526F3129, classified under NAICS code 332320 for specialty trade contracting.

Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A

AI Contract Overview

The contract encompasses the sub-tier fabrication of structural and mechanical components for aircraft access doors, requiring precision CNC machining, sheet metal forming, welding, and surface finishing operations to meet stringent military drawing tolerances. All work must adhere to exacting quality standards typical of defense aviation applications, ensuring dimensional accuracy, material integrity, and functional reliability under operational conditions. The subcontract is part of a larger defense logistics effort under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 332320 for forged and stamped metal product manufacturing. Performance is expected to support critical aerospace systems with no specified location for execution, indicating flexibility in manufacturing location while maintaining compliance with federal defense requirements. The contract was posted on July 14, 2026, and is formally linked to the DIBBS system under award identifiers SPE4A723D0334 and SPE4A724F3947, signifying its integration into the Department of Defense’s supply chain for aircraft components. No set-aside provisions or small business designations are indicated, and the work is being procured as a subcontract within a broader defense procurement framework.

General Info

Subcontract for precision aerospace components under DoD supply chain with military-grade quality requirements.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

332320

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A724F3947.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

DOOR, ACCESS, AIRCRAF

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJul 14

subcontract

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Sub-tier fabrication of structural and mechanical components for aircraft access doors, including CNC machining, sheet metal forming, welding, and surface finishing to military drawing tolerances.