Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Precision Manufacturing of Aircraft Fairings

Active

Federal

Response Deadline11/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by the Department of Defense DLA Weapons Support ASC, requires the precision manufacturing of eight aircraft fairings, part number 351081-3L. The contractor must fabricate these parts in strict accordance with Reference Drawing NR 98897 337530 Rev H and TDP Rev B Gen 2, ensuring that trammel points are measured to a precision of +/- 0.010 inches centerline. Notably, the use of additive manufacturing is strictly prohibited for this project. To be eligible, the provider must hold either SAE AS9003 or ISO 9001 certification and maintain CMMC Level 2 compliance. This opportunity is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 336413, with the place of performance located at Robins Air Force Base. Responses are due by November 10, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

ROBINS A F B, GA, 31098-1887, USA

Set-Aside

SDVOSBC

Documents

This scope was carved out of SPE4A7-27-T-2595.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FAIRING, AIRCRAFT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineNov 10

Submission deadline

Response Deadline

11/10/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures aircraft fairings for prime contractors delivering DLA supply contracts. Fabricates parts per Reference Drawing NR 98897 337530 Rev H and TDP Rev B Gen 2. Performs precision measurement of trammel points within +/- 0.010 inches centerline. Requires SAE AS9003 or ISO 9001 certification and CMMC Level 2. Additive manufacturing is prohibited. Delivers eight completed Aircraft Fairings (P/N 351081-3L).

Similar Contracts

Same NAICS industry code

Manufacturing of Aileron Counter Balance ShieldsThis subcontract involves the manufacture and supply of four certified precision-machined aileron counter balance shields for prime contractors supporting DLA Weapons Support supply contracts. The components must be fabricated using aerospace-grade alloys and precision CNC machining in strict accordance with reference drawings 98897 STP51-302 (Rev AJ) and 98897 4J53005/1 (Rev K). All production must adhere to the DLA Master List of Technical and Quality Requirements (RA001). The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Robins Air Force Base. The contract falls under NAICS code 336413, with a response deadline set for November 10, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Supply of Vehicular Insulation Panels (NSN 2540016050988)This subcontract involves the manufacture or procurement of two specialized vehicular insulation panels, identified by NSN 2540016050988, for prime contractors supporting the Department of Defense DLA Weapons Support LSO Combat Vehicles and Armament. All supplied units must strictly adhere to the DLA Master List of Technical and Quality Requirements and ASTM D3951 standards. The contract specifies that items are to be packaged and shipped FOB Origin, with the place of performance located in New Cumberland. This requirement falls under NAICS code 336413, with a response deadline set for November 13, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 4 hours ago

DEADLINE

Supply of Air Duct Hoses (NSN 4720-01-159-7393)This subcontract involves the supply of 45 specialized air duct hoses meeting NSN 4720-01-159-7393 specifications for the Defense Logistics Agency Weapons Support Fluid Handling Division. The selected provider must manufacture or source the items and ensure all packaging strictly adheres to RP001 DLA Packaging Requirements for Procurement. Performance will take place at Hill AFB, and the contractor is required to maintain a valid CAGE code and UEI. The opportunity was posted on November 2, 2026, with a response deadline of November 13, 2026. Falling under NAICS code 336413, this contract is intended for suppliers supporting prime contractors in delivering critical components to the Department of Defense.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

Precision Fabrication of Accumulator AssembliesThis subcontract, titled Precision Fabrication of Accumulator Assemblies, is a total small business set-aside issued by the Department of Defense for the DLA Weapons Support ASC. The project requires the precision machining of three Accumulator Assemblies, specifically part number 47614, in accordance with provided technical drawings. The scope of work excludes additive manufacturing and mandates strict adherence to MIL-STD-1916 or ASQ H1331 for sampling, RQ017 for bare item marking, and MIL-STD-2073-1E for packaging and delivery. To be eligible, contractors must hold SAE AS9100 certification and maintain CMMC Level 2 compliance. The work is to be performed in New Cumberland, Pennsylvania. Interested parties must respond by November 10, 2026, to fulfill the requirements of this specialized fabrication effort under NAICS code 336413.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Precision Manufacturing of Metal Tube AssembliesThis subcontract involves the precision manufacturing of 29 metal tube assemblies for the Department of Defense, specifically supporting DLA aviation supply contracts. The fabrication must strictly follow TDP Rev A Gen 1 and RTX Corporation part numbers 458123 and 646787, while adhering to Reference QAP 77445 MQR-PSD-1. A zero non-conformance policy is in effect, and the use of additive manufacturing is strictly prohibited for these components. The contractor is required to maintain CMMC Level 2 and NIST SP 800-171 compliance to ensure data security. Performance will take place at Tinker AFB, with the final deliverable consisting of 29 completed and inspected aviation tube assemblies. The solicitation was posted on November 2, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 4 hours ago

DEADLINE

Aerospace Grade Alloy/Composite SupplyThis subcontract, titled Aerospace Grade Alloy/Composite Supply, is a total small business set-aside issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The contract involves the procurement of raw aerospace materials for prime contractors, specifically requiring compliance with specification 81205 BMS5-28AN and TDP Rev D Gen 4 standards. Performance will take place at Robins Air Force Base, with the supplier responsible for delivering certified raw materials directly to the fabricator. To ensure strict quality control and traceability, the supplier must provide full material certifications and Mill Test Reports. Additionally, because the project involves sensitive defense technology, the contractor is required to have the necessary approvals to handle ITAR and EAR controlled materials. The solicitation was posted on November 2, 2026, with a response deadline of November 10, 2026, falling under NAICS code 336413.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Precision Aircraft Panel ManufacturingThe Precision Aircraft Panel Manufacturing subcontract involves the fabrication of structural aircraft panels for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires subtractive or formative manufacturing in strict accordance with Basic Drawing 98897 4F75009 and Reference Drawings 98897 STM22-506 and 98897 DS30000. The selected provider is responsible for delivering finished panels and completing First Article Testing for units delivered to Robins Air Force Base. This opportunity is a total small business set-aside under NAICS code 336413. To be eligible, contractors must maintain CMMC Level 2 and US/Canada JCP certifications, as well as compliance with SAE AS9003 or ISO 9001 standards. The project is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Robins AFB.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Manufacture of Quick Disconnect Coupling HalvesThis subcontract involves the precision CNC machining and manufacture of 14 finished and inspected female quick disconnect coupling halves for the DLA Weapons Support Fluid Handling Division. Production must strictly adhere to TDP Rev B Gen 2 and reference drawings provided by LKR Inc, Sielman S.A., and Transdigm Inc. Performance of the work will take place in New Cumberland. To be eligible, the manufacturer must maintain SAE AS9003 or ISO 9001 quality systems and hold CMMC Level 2 and JCP certifications to handle ITAR and EAR regulated data. The solicitation was posted on November 2, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

Fabrication of Horizontal Stabilizer Inner Skin (P/N 352387-11L)This subcontract involves the fabrication of one Horizontal Stabilizer Inner Skin, part number 352387-11L, for the DLA Weapons Support Aviation Supply Chain. The manufacturer must produce the primary aerospace structural component in strict accordance with Basic Drawing NR 98897 352387 Revision D and TDP Revision A Gen 2. Notably, the use of additive manufacturing is strictly prohibited for this project. The contract requires rigorous adherence to security and quality standards, specifically mandating CMMC Level 2 and DFARS 252.204-7012 compliance. Performance will take place at Robins Air Force Base. Interested parties must respond by November 10, 2026, regarding this Department of Defense requirement under NAICS code 336413.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

Aviation Wire Rope Assembly Fabrication (P/N BACC13AM4D1190)This subcontract involves the fabrication of a single-leg aviation wire rope assembly, part number BACC13AM4D1190, for prime contractors supporting DLA Weapons Support ASC projects. The manufacturer is required to produce the assembly using precision swaging and crimping equipment in strict accordance with Basic Drawing 81205 BACC13AM Revision L and QAP 13873 QAP-020 Revision A. To be eligible, the provider must hold AS9100 certification and possess either source approval or a completed SAR package. The opportunity is designated as a total small business set-aside under NAICS code 336413 for the Department of Defense. The scope of work culminates in the delivery of one completed and tested assembly. Interested parties must respond by November 16, 2026, to meet the requirements set forth by the DLA Weapons Support ASC Supplier Oper AE and AF Division.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Supply of Ignition Coil Vibrators (NSN 2925009502516)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC, requires the supply of 10 Ignition Coil Vibrators, part number 1-300-363, corresponding to NSN 2925009502516. The contract is specifically set aside for Women-Owned Small Businesses under NAICS code 336413. Performance will take place in New Cumberland, Pennsylvania, with delivery to a designated DLA location. The supplier must ensure strict adherence to Critical Safety Item compliance and provide a valid CAGE code for identification. Technical requirements include marking according to MIL-STD-129 and sampling in accordance with MIL-STD-1916. The solicitation was posted on November 2, 2026, with a response deadline of November 10, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Manufacturing of Grooved Clamp Couplings (NSN 010461421)This subcontract involves the manufacture of grooved clamp couplings, specifically Part Number BACC10EY400BE, for prime contractors supporting DLA Weapons Support ASC aerospace projects. The production must adhere to Basic Drawing NR 81205 BACC10EY Revision V and TDP Rev A Gen 1, utilizing precision machining to ensure all components meet Boeing Aerospace Company Standard tolerances. The Department of Defense requires that all finished couplings be marked and packaged in accordance with MIL-STD-129 and MIL-STD-2073-1E standards. Delivery of the completed parts is designated as FOB Origin. The opportunity is categorized under NAICS code 336413, with a response deadline set for December 2, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Supply of Turnlock Fastener ReceptaclesThis subcontract involves the supply of two Turnlock Fastener Receptacles, specifically part BACS22A32, manufactured or sourced according to Basic Drawing NR 81205 BACS22A Revision W. The contract supports prime contractors delivering to the Department of Defense via the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place in San Diego. The provider must adhere to strict technical and regulatory standards, including MIL-STD-129 for marking, RP001 and MIL-STD-2073-1E for packaging, and MIL-STD-1916 or ASQ H1331 for sampling plans. Additionally, the contract mandates full compliance with the Buy American Act and NIST SP 800-171 cybersecurity standards.

Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

Aerospace Component Packaging and Marking ServicesThe Aerospace Component Packaging and Marking Services subcontract involves providing specialized packaging and marking for prime contractors supporting DLA supply contracts. The scope of work includes packaging components according to RP001 standards, performing bare item marking per RQ017, and applying hazard warning labels in compliance with DFARS 252.223-7001. To ensure government shipment readiness, the contractor will utilize industrial etching equipment and military-grade packaging materials to process nozzles. This project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. The opportunity was posted on November 2, 2026, with a response deadline of November 10, 2026. It is categorized under NAICS code 493110.

General Warehousing and Storage

POSTED

about 4 hours ago

DEADLINE

Lubricating Nozzle ManufacturerThis subcontract involves the manufacture of lubricating nozzles for prime contractors supporting DLA Aviation projects, specifically for NSN 2840-01-256-2029. The selected manufacturer is responsible for fabricating nozzles to strict military specifications, executing First Article Tests as outlined in CLIN 0002, and performing bare item marking according to RQ017. Due to the nature of the components, the contractor must utilize precision machining equipment and maintain full CSI compliance for Critical Safety Items. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Div, with performance taking place at Tinker AFB. The final deliverables include the finished lubricating nozzles and the required FAT certification. Interested parties must adhere to the response deadline of November 10, 2026, as specified in the solicitation.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 4 hours ago

DEADLINE

Quality Assurance and Certification for Critical Safety ItemsThis subcontract, titled Quality Assurance and Certification for Critical Safety Items, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The project involves providing independent verification and certification services for prime contractors, specifically focusing on the verification of Critical Safety Item tolerances using NIST-calibrated metrology equipment. The selected provider must execute sampling plans according to MIL-STD-1916 or ASQ H1331, prepare Source Approval Request documentation, and maintain strict SAE AS9100 compliance to deliver certified Inspection Reports and Certificates of Conformance. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, with the place of performance located in New Cumberland. Interested parties must submit their responses by November 10, 2026.

Testing Laboratories and Services

POSTED

about 4 hours ago

DEADLINE

Supplier of Nonmetallic Flexible Conduit (NSN 5975-01-436-8705)This subcontract involves the supply of 100 feet of nonmetallic flexible conduit to support prime contractors delivering DLA supply contracts. The materials must strictly adhere to NSN 5975-01-436-8705 specifications and comply with MIL-STD-129 standards for shipment and storage marking. The contract is issued by the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div under NAICS code 423610. Performance will take place in Cherry Point, North Carolina, with a response deadline set for November 10, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

Aerospace Surface Treatment and CoatingThis subcontract for Aerospace Surface Treatment and Coating supports the Department of Defense through the DLA Weapons Support ASC. The selected provider will perform surface treatments and coatings for aircraft panels, ensuring all finishes align with reference drawings. Key responsibilities include executing physical identification and bare item marking in strict accordance with MIL-STD-129 and RQ017 standards. The project is a total small business set-aside under NAICS code 332813, with performance taking place at Robins Air Force Base. Due to the nature of the components, the contractor must possess the capability to handle ITAR-controlled materials and maintain rigorous aerospace quality standards. Responses for this opportunity are due by November 10, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 4 hours ago

DEADLINE

Supply of Blank Panels (NSN 5975015347492)This subcontract involves the manufacture or sourcing of three blank panels meeting NSN 5975015347492 specifications for prime contractors supporting the Department of Defense DLA Weapons Support ASC. The project requires strict adherence to quality control standards under SAE AS9003 or ISO 9001, with packaging and labeling conducted according to ASTM D3951 and MIL-STD-129 respectively. The performance of this contract takes place in New Cumberland, Pennsylvania, under NAICS code 335999. To be eligible, the provider must maintain cybersecurity compliance in accordance with NIST SP 800-171. The response deadline for this requirement is November 10, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supplier of Bushing, Sleeve (NSN 5365016750659)This subcontract involves the manufacture or procurement of 27 sleeve bushings identified by NSN 5365016750659 to support prime contractors delivering on Department of Defense contracts. Managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div, the agreement requires the supplier to package and ship the items under FOB Origin terms, with a final delivery deadline of June 20, 2027. The supplier must be registered with the DLA Account Management and Provisioning System to ensure compliance. Performance for this contract is centered in Barstow, California, under NAICS code 332721.

Precision Turned Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS