This Government Contract opportunity from Department Of Defense was posted on May 4, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Precision Manufacturing of Maritime Valves and Pressure Components

Closed

Federal

Submission Closed05/29/2026, 08:30:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332913

New

DIBBS

Supply of Drain Cocks

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-263S

This solicitation, identified as SPE7MC-26-T-263S, is a request for quotations issued by the Department of Defense DLA Land and Maritime for the procurement of 131 units of drain cocks. The item is classified as a critical application item with NSN 4820-01-337-2027 and is associated with Oshkosh Defense LLC part number 1704860 and Circor Aerospace, Inc. part number HV22-29. The contract falls under NAICS code 332913 and requires delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement specifies a delivery window of 168 days after the order, with an original required delivery date of March 3, 2027. Technical and quality requirements are governed by the DLA Master List, and packaging must adhere to MIL-STD-2073-1E and RP001 standards, with marking following MIL-STD-129. The shipment is designated as FOB Origin, with inspection and acceptance occurring at the destination. Quotes must be submitted via the DIBBS system by September 21, 2026, and must comply with the Buy American Act and Berry Amendment regulations.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Plumbing Fixtures and Piping Supplies

California Department of State Hospitals

POSTED

DEADLINE

Plumbing Supplies and Materials Provider

Housing Authority City of Milwaukee

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-253A

Contract SPE7MC-26-T-253A is a solicitation issued by the Department of Defense DLA Land and Maritime for the procurement of air reservoir drain cocks, identified by NSN 4820-01-167-1698. The requirement consists of two line items totaling 171 units, with 32 units destined for DLA Distribution Albany in Georgia and 139 units destined for DLA Distribution San Joaquin in California. The items are identified as critical application items and are associated with Bendix Commercial Vehicle Systems LLC part numbers 276068 C-3 Option A and 276068N. The contract specifies a delivery timeframe of 67 days after the order is placed, with an original required delivery date of January 5, 2026. Quality assurance is governed by destination inspection and acceptance, utilizing sampling methods consistent with MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA packaging requirements RP001. The solicitation was posted on September 9, 2026, with a response deadline of September 21, 2026, under NAICS code 332913.

ALBANY TRANSPORTATION OFFICER

POSTED

DEADLINE

45--COMPACTOR,TRASH DIS

Solicitation # N0010426RZB62

This procurement, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a small business set-aside for the TRIPER Program. The contract is a firm-fixed-price agreement for the manufacture or refurbishment of a trash compactor unit, identified as NSN 4540-01-068-4744. The government will provide a hydraulic control valve HS-750 as government furnished material to the successful bidder for testing upon completion of manufacturing. Final delivery of the material is required within 800 days, although partial and early deliveries are authorized and encouraged at no additional cost. The award will be made to a single offeror based on a best-value determination where past performance is considered more important than price. Evaluation will include the use of the DoD Supplier Performance Risk System to assess item, price, and supplier risk. The contract requires strict adherence to MIL-STD-2073 for packaging and MIL-STD-129 for marking, with specific requirements for DLR labels and maritime identification codes. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system. The solicitation closing date has been extended to September 21, 2026, and the award will be issued bilaterally, requiring written acceptance from the contractor.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Supplier of High-Performance Electrical Wire (NSN 6145011322279)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

High-Efficiency Toilet (HET) and Parts Supplier

City of San Buenaventura

POSTED

DEADLINE

Commercial Plumbing Parts and Materials Supplier

POSTED

DEADLINE

HYD PWR CNTRL ASY — 1680015700298 — SPRPA126QZC08

Solicitation # SPRPA1-26-Q-ZC08

This solicitation, issued by the Department of the Navy via DLA Aviation at Philadelphia, concerns the procurement of a Hydraulic Power Control Assembly. The material is designated as Critical because it is used in shipboard systems for aircraft launch and recovery, where failure could lead to serious personnel injury, loss of life, or loss of vital aircraft and shipboard systems. Consequently, special control procedures are required to ensure the receipt of correct material. The contractor is responsible for manufacturing, testing, and inspecting articles according to the NAWCAD LKE drawing package and specified drawing numbers. All necessary manufacturing aids, including fixtures, jigs, and test equipment, are the sole responsibility of the contractor. Compliance with IPC/EIAJ-STD-001C is expected if MIL-STD-454 is referenced, and packaging must adhere to MIL-STD 2073.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Plumbing Fixtures and Components SupplyThis subcontract agreement with the Virginia Department of Transportation involves the procurement and delivery of commercial-grade plumbing fixtures, valves, and piping materials for projects within the Bristol District. The scope of work includes supplying toilets, sinks, showers, eye wash stations, and electronic control faucets, ensuring all materials adhere to industry standards and manufacturer recommendations. The selected provider is responsible for delivering these specified materials directly to VDOT sites or designated prime contractor warehouses. Interested parties must submit their responses by September 14, 2026, to be considered for this supply contract under NAICS code 332913.

Virginia Department of Transportation

POSTED

DEADLINE

Supply of Garbage Disposal Parts KitsThis subcontract involves the supply of 29 specialized garbage disposal parts kits, identified by NSN 4540012735778, to support prime contractors fulfilling Department of Defense supply contracts. The performance of this contract is centered at the DDSP New Cumberland Facility, with all deliverables required to strictly adhere to the RP001 DLA Packaging Requirements for Procurement and the RA001 DLA Master List of Technical and Quality Requirements. The procurement falls under NAICS code 332913 and was posted on September 2, 2026, with a response deadline of September 14, 2026. The selected provider is responsible for ensuring that all units are packaged and delivered according to specific DLA standards to ensure compliance with federal procurement guidelines.

DDSP NEW CUMBERLAND FACILITY

POSTED

10 days ago

DEADLINE

in 2 days

AI Contract Overview

The contract seeks qualified manufacturers to fabricate high-integrity valves and pressure system components specifically for naval applications, with stringent requirements around configuration control, welding and brazing standards, and first article testing to ensure mission-critical reliability. All work must adhere to exacting military-grade specifications, emphasizing traceability, material integrity, and process validation throughout the production lifecycle. The subcontract is issued under NAICS code 332913, targeting specialized precision manufacturing capabilities within the defense supply chain. Responses are due by May 29, 2026, at 08:30 AM, with the solicitation posted on May 4, 2026, and managed by the Navsup Weapon Systems Support Mech under the Department of Defense. While the place of performance and point of contact details are not specified, the work is expected to support U.S. naval systems requiring certified, high-reliability components. Contractors must demonstrate proven experience in defense-grade fabrication, robust quality assurance protocols, and the ability to navigate complex regulatory and documentation requirements tied to military hardware procurement.

General Info

Fabrication of high-integrity naval valves with strict quality, welding standards, and first article testing.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

332913 - Plumbing Fixture Fitting and Trim ManufacturingView NAICS

Place of Performance

Set-Aside

NONE

Documents

This scope was carved out of N0010426QZA64.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NSN 1HD 4820-01-549-6678 C1 VALVE,AUTO SHUT-OFF

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 4

subcontract

Response DeadlineMay 29

Deadline has passed

Submission Closed

05/29/2026, 08:30:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Navsup Weapon Systems Support Mech

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Fabrication of high-integrity valves and pressure system components for naval applications requiring strict compliance with configuration control, welding/brazing standards, and first article testing.