Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Metal Fabrication of Angle Brackets

Active

Federal

Response Deadline07/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the manufacture of 2,154 units of BRACKET, ANGLE with NSN 5340011854560, fabricated to meet exact military specifications through precision processes including cutting, bending, drilling, and finishing within tight tolerances. All work must adhere to established defense standards to ensure functional reliability and compatibility with military equipment. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, designated by the SBA, ensuring eligibility is restricted to small businesses as defined by the NAICS code 332312 for fabricated metal product manufacturing. The opportunity was posted on July 23, 2026, with a response deadline of July 28, 2026, and is managed by the Strategic Acquisition Program Directorate under the Department of Defense. Performance obligations are bound to military requirements with no specified location for delivery, and the procurement is accessible through the DIBBS system using the provided RFQ link.

General Info

2,154 military-spec brackets manufactured by small businesses under DOD subcontract, due July 28, 2026.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

332312 - Fabricated Structural Metal ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineJul 28

Submission deadline

Response Deadline

07/28/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of 2,154 units of BRACKET, ANGLE (NSN: 5340011854560) per military specifications, including cutting, bending, drilling, and finishing to exact tolerances.

Similar Contracts

Same NAICS industry code

EOU Sunshades Creech AFBThe Contract F4FANG6133A001 for the Experimental Operations Unit at Creech AFB requires the design, supply, and construction of four new shade structures with four aircraft parking bays each, to be installed on the south ramp west of existing structures on the airfield’s parking apron in Indian Springs, Nevada. Concurrently, four existing sunshades must be relocated and reoriented to align with the new structures, and a fifth sunshade must be demolished. Each new structure must incorporate LED lighting with a 12-hour battery backup powered by a photovoltaic array, along with conduit, copper wiring, service power outlets, a service panel, Una-strut support assembly, and a solar-powered obstruction light. All designs must adhere to specified aesthetic standards including tapered I-beam girders and Frazee Paint #213 Travatan finish, and comply with structural codes including UFC 3-301-01, IBC 2018, ASCE 7-16, and AISC standards to withstand 110 MPH sustained winds. The contractor must deliver progressive design drawings, redline construction documents, and stamped as-built AutoCAD and PDF record drawings, along with a comprehensive Operations and Maintenance Manual detailing materials, fasteners, and torque specs, and submit required FAA Form 7460-1 notifications. The project is subject to a 210-day performance period from notice to proceed, with 90 days allocated for design and 120 days for construction. The solicitation is a Firm Fixed Price (FFP) contract under a Total Small Business Set-Aside (NAICS 332312, size standard: 500 employees), requiring offerors to self-certify as a small business and provide their Unique Entity Identifier and CAGE code. Proposals must be submitted electronically via email to the designated point of contact by the deadline of August 7, 2026, at 5:00 PM PDT, with no submissions accepted through SAM.gov. Evaluation will be conducted on a Lowest-Priced, Technically Acceptable (LPTA) basis, requiring only a pass-fail technical assessment and full, accurate line-item pricing with no trade-offs between cost and non-cost factors. All work must occur at Creech AFB under strict security protocols, including mandatory security clearances for personnel, no weapons on base, no photography on the flight line, and FOD mitigation

FA4861 99 Cons Lgc

POSTED

about 10 hours ago

DEADLINE

Bridge Structural Steel Repair and FabricationThe contract involves the repair or replacement of damaged structural steel components on nine bridges, encompassing girders, beams, and trusses. Work required includes precise cutting, welding, bolting, and installation of new or refurbished steel elements to restore structural integrity and ensure safety and longevity of the bridges. All tasks must comply with industry standards and engineering specifications to maintain load-bearing capacity and regulatory compliance. The contract is a subcontract for Bridge Structural Steel Repair and Fabrication, posted by Montgomery County, Pennsylvania, with a response deadline of August 25, 2026. The North American Industry Classification System code 332312 indicates the focus on fabricated metal product manufacturing related to structural steel. The work is to be performed at unspecified locations throughout the county, and the solicitation is open to qualified subcontractors capable of handling complex field fabrication and repair operations under stringent safety and quality controls.

Montgomery County Pa

POSTED

DEADLINE

in about 1 month

Steel Personnel Platform FabricationThe Mississippi Department of Transportation is soliciting a subcontract for the fabrication of a steel personnel platform rated for a 600-pound capacity, designed to safely support workers during elevated operations. The platform must include integrated safety harnesses and lanyards to ensure fall protection compliance, along with secure, code-compliant access points for reliable entry and exit. The work falls under NAICS code 332312, indicating specialized metal fabrication services, and requires adherence to strict structural and safety standards. All bids must be submitted by August 12, 2026, with the project anticipated to take place within Mississippi, though the exact location has not been specified. The contract posting is available through the state’s official bid portal, and interested parties should review all technical and regulatory requirements prior to submission.

MS DEPT of TRANSPORTATION

POSTED

DEADLINE

Structural Steel Fabrication and ErectionThe contract calls for the fabrication and on-site erection of a structural steel framework to support a new facility under the Strategic Acquisition Program Directorate of the Department of Defense. The work involves manufacturing steel components according to engineering specifications and assembling them at the designated location, ensuring compliance with safety, quality, and structural integrity standards. The solicitation is classified as a subcontract and is open for responses until July 28, 2026, with the opportunity posted on July 23, 2026. The North American Industry Classification System code 332312 confirms the scope falls under structural metal fabrication. Performance location details are not specified, and no set-aside provisions or point of contact information are provided in the data. All inquiries and submissions must be managed through the official DIBBS portal linked in the solicitation.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Structural Panel Manufacturing and AssemblyThe contract requires the manufacture and full assembly of a structural AI panel identified by NSN 1560-00-874-6326, adhering strictly to military specifications with all components sourced exclusively from Qualified Products Lists or Qualified Manufacturer Lists. The work demands comprehensive quality assurance processes to ensure compliance, performance, and durability under operational military conditions. The subcontract is designated as a Total Small Business Set-Aside under FAR 19.5, meaning only small business entities are eligible to respond, and it falls under the NAICS code 332312 for Metal Fabrication. The solicitation was posted on July 23, 2026, with a firm response deadline of August 24, 2026. The contracting action is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and performance is expected to occur under the oversight of the military supply chain. All deliverables must meet exacting standards for integration into defense systems, with no exceptions to sourcing or certification requirements.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

in about 1 month

ROLLER, ENERGY ABSORThe item specified is a ROLLER, ENERGY ABSORBER with NSN 1710-00-045-7237, requiring a metal casting manufacturing process and associated tooling for production. Eight units are to be procured under solicitation SPE7M2-26-T-5712, with a response deadline of August 3, 2026, and delivery expected 211 days after order placement. The item is subject to strict export control regulations under either ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons regardless of location, and DFARS 252.225-7048 governs its handling. Access to controlled technical data is restricted to DLA contractors with approved US/Canada Joint Certification Program status, completed mandatory training on handling DOD export-controlled data, and formal approval from DLA. The place of performance is New Cumberland, PA, and the contracting activity is under the Department of Defense’s Nuclear Reactor Program. Primary point of contact is Alisha Blanton, reachable via email and phone for procurement inquiries.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

PANEL, STRUCTURAL, AIThe contract solicitation SPE4A7-26-R-0697 is for the procurement of 40 units of a Structural AI Panel with part number 34-1263-522 and NSN 1560-00-874-6326, subject to a total small business set-aside under FAR 19.5. Delivery is required within 208 days after contract award, and the solicitation is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size. The item is subject to stringent compliance requirements including Cybersecurity Maturity Model Certification (CMMC) Level 2, as the contractor must be a certified third-party assessment organization. Technical data associated with the item is subject to export control under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring DLA-approved contractors to hold JCP certification, complete mandatory training, and obtain prior authorization for access. The supplier must adhere to DLA packaging standards, perform inspection and acceptance at origin, and manage configuration changes through formal engineering change proposals for any deviations or waivers. Components within the panel must be sourced from Qualified Products Lists or Qualified Manufacturers Lists as specified in procurement note H02. Physical identification of the item must be marked per RQ017, though unique item identification is waived per customer request under DFARS 252.211-7003. Removal of government identification from non-accepted supplies is required, and source approval documentation must be submitted with full supporting information. The solicitation closes on August 24, 2026, with responses due by that date, and all contractors must comply with DFARS 252.225-7048 regarding export-controlled technical data handling, ensuring no unauthorized disclosure occurs to foreign entities or subsidiaries.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

in about 1 month

TRAINING DEVICE, FIRThe contract pertains to the procurement of one Training Device, FIR, identified by NSN 6920-01-564-9655, under solicitation SPE8E6-26-T-3850, with a required delivery date of July 21, 2026, and a 20-day delivery window from the origin point. The item must be packaged in compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence and must be strictly followed, including adherence to MIL-STD-129 for marking and labeling. Palletization must conform to DLA Packaging Requirements for Procurement, and parcel post is explicitly prohibited—shipping must occur via traceable means. The device is subject to Covered Defense Information regulations and requires a Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment. The unit of issue is each, with no quantity variance allowed, and inspection and acceptance occur at the destination. Delivery instructions direct shipment to a designated military facility in Saint Paul, Minnesota, with specific mailing and freight addresses provided. The contract emphasizes that no technical data package is currently approved by DLA Troop Support for this NSN, and requests for such documentation should not be submitted. Pricing is set at one dollar per unit, with no additional costs indicated.

Defense Logistics Agency

POSTED

DEADLINE

KNOBThis contract, issued under solicitation number SPE7LX-26-U-8568 by the Strategic Acquisition Program Directorate of the Department of Defense, is a small business set-aside for the procurement of 114 units of a military hardware item identified as KNOB with NSN 5355008373471. The contract is structured as an Indefinite Delivery Contract (IDC), meaning delivery orders are not guaranteed but must comply with established standards and may not exceed a maximum contract value of $350,000. The item must be manufactured to the current revision of either a military standard or a recognized non-government consensus standard, specifically NASM91528 Revision 1 dated May 31, 2012, or NASM3926 Revision 1 dated April 29, 2011. All hardware must bear permanent identification markings per MIL-STD-130N and be packaged and labeled in strict accordance with MIL-STD-2073-1E and MIL-STD-129, with no special marking required beyond standard requirements. Palletization must comply with DLA Packaging Requirements for Procurement RP001. Delivery is FOB origin with inspection and acceptance occurring at the destination 153 days after receipt of order, with no variance permitted in quantity. The sampling method for quality assurance must follow MIL-STD-1916 or ASQ H1331 Table 1 with a zero-defect acceptance criteria for all attributes; critical, major, and minor characteristics are assigned AQLs of 0.1, 1.0, and 4.0 respectively. The use of mercury or mercury-containing compounds is strictly prohibited unless exempted for specific applications such as batteries, fluorescent lamps, sensors, or weapon systems as defined by NAVSEA, with any exempted portable devices requiring shockproof construction and a secondary containment boundary. Hazardous materials must be labeled per 29 CFR 1910.1200 and accompanied by current Safety Data Sheets, and compliance with cybersecurity and data protection clauses including 252.204-7012 is mandatory. The contractor must affirm small business status, comply with all employment, trafficking, and ethical representation clauses, and submit proposals electronically through DIBBS by the July 28, 2026 deadline. Payment is to be processed via

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

SHROUD ASSEMBLY, GENERATORThe contract is for the procurement of 40 units of a Shroud Assembly, Generator with the NSN 1560-00-829-9365, under solicitation SPE4A7-26-R-0701. The delivery schedule requires fulfillment within 232 days after award, and the solicitation is designated as a Total Small Business Set-Aside, indicating exclusive eligibility for small business concerns. Engineering requirements specify weld class 'B' per BAC 5975 with an acceptable weld size of 3/16 inch, as detailed in drawing 008299365. Compliance is mandated with all technical and quality requirements listed in the DLA Master List under R and I identifiers, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must adhere to DLA standards, and inspection and acceptance are to occur at the supplier’s origin. Government identification must be removed from any non-accepted items. Although Item Unique Identification is not required, DFARS 252.211-7003(c)(1)(i) governs its omission. Technical data associated with this item is subject to export control under ITAR or EAR, restricting all disclosures to foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to controlled data is limited to contractors approved by DLA, holding a valid US/Canada Joint Certification Program certification, and having successfully completed mandatory export control training and questionnaire. The contracting activity falls under the Department of Defense, specifically the ASC Supplier Operations AE and AF Division.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

in about 1 month

KNOBThis contract, identified by solicitation number SPE7LX-26-U-8575, is a small business set-aside under NAICS code 332312 for the procurement of a knob component with NSN 5355-00-883-4609 and part number MS25167P2B. The item is defined by the non-government standard NASM25049, Revision 1 dated February 28, 2013, and must comply with MIL-STD-130N for permanent identification marking using heat or ultrasonic insertion techniques to apply Data Matrix bar codes. The quantity of 15 units is estimated and non-binding, with no guaranteed minimum specified beyond the contract’s maximum value cap of $350,000. The contract operates under an indefinite-delivery framework, allowing the Government to issue delivery orders up to that ceiling, with restrictions limiting cumulative orders to no more than two within any seven-day period. Delivery is scheduled for 153 days after order placement, with FOB origin terms, inspection and acceptance occurring at the destination, and packaging required to meet ASTM D3951 while superseding any conflicting requirements with the DLA Master List of Technical and Quality Requirements. All packaging and labeling must adhere to MIL-STD-129, including Data Matrix bar coding, and palletization must conform to RP001: DLA Packaging Requirements for Procurement. Sampling follows MIL-STD-1916 or ASQ H1331 with a zero-defect acceptance criterion unless otherwise stated, and critical attributes are assigned the highest verification levels. The contract incorporates numerous FAR and DFARS clauses, including requirements for small business representation, employment eligibility verification, combating human trafficking, sustainable products, hazardous material handling, and NIST SP 800-171 compliance for cybersecurity of covered defense information. Contractors must use WAWF for invoicing and ensure all materials are free from ozone-depleting substances and hexavalent chromium. Proposals must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by the deadline of July 28, 2026, and the solicitation is open only to small business concerns as defined under the SBA size standards, with mandatory representation of UEI and CAGE codes.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Commercial Garage Door Supply

POSTED

DEADLINE

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

Supplier for Raw Materials and Specialty ComponentsThe contract seeks qualified suppliers to provide raw materials and specialty subcomponents compliant with military specifications for use in clutch disk assemblies, supporting multisource supply requirements to ensure continuity and redundancy in production. The materials required include friction materials and metal stampings, critical elements that must meet stringent defense standards for performance, durability, and reliability under extreme operating conditions. This subcontract is part of a broader effort by the Strategic Acquisition Program Directorate within the Department of Defense to secure reliable sources for components essential to defense systems. Proposals must be submitted by August 25, 2026, with the solicitation issued under the NAICS code 331492, which categorizes the industry as Other Finished Metal Product Manufacturing. There is no setaside designation, meaning all eligible companies may bid regardless of size or ownership structure. The place of performance and point of contact details are not specified, indicating flexibility in logistics and supplier location, though adherence to MIL-spec compliance and timely delivery remain paramount. Interested parties can access the full solicitation through the DIBBS portal using the provided link.

Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Quality Assurance and Conformance TestingThe contract requires the performance of comprehensive quality assurance activities including in-process and final inspections, First Article Testing (FAT), and the issuance of Certificates of Conformance in strict alignment with Federal Acquisition Regulation 52.246-15 and Defense Logistics Agency specifications. All testing and inspection protocols must ensure full compliance with contractual and regulatory standards to confirm that delivered items meet required technical and performance criteria. The work under this subcontract is governed by NAICS code 541330 and is administered by the Strategic Acquisition Program Directorate within the Department of Defense. The contract is open for submission until August 25, 2026, and performance is expected to support defense acquisition objectives without geographic specification. Participation is subject to adherence to all DLA and federal quality assurance mandates, with no set-aside designation specified.

Engineering Services

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Supply Chain and Logistics ManagementThe contract supports supply chain and logistics management for order fulfillment and delivery to continental United States locations under FOB Destination terms, requiring full responsibility for transportation, risk, and final delivery to the designated destination. The contractor must ensure seamless integration with the Defense Logistics Agency’s ordering systems to maintain real-time visibility, accuracy, and responsiveness across the supply network. Surge capacity is a critical component, demanding the ability to rapidly scale operations during peak demand or emergency scenarios without compromising timelines or service levels. The work falls under NAICS code 484220, classifying it as truck transportation of freight, and is structured as a subcontract within the Department of Defense’s Strategic Acquisition Program Directorate. Proposals are due by August 25, 2026, with the solicitation posted on July 24, 2026, allowing potential offerors time to prepare detailed响应. While specific performance locations and points of contact are not detailed, the scope implies nationwide coverage across CONUS, necessitating robust infrastructure, reliable carriers, and proven experience in military logistics environments. Failure to meet delivery timelines or system integration requirements could disrupt mission-critical supply chains.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Military Packaging and Labeling ServicesThe contract requires the provision of military-standard packaging, marking, and labeling services for clutch disks in full compliance with MIL-STD-129 specifications. This includes accurate application of National Stock Numbers, CAGE codes, and any required hazardous material labeling where applicable, ensuring all items meet Department of Defense standards for identification, handling, and logistics traceability. The work must be performed to exacting military guidelines to support supply chain integrity and operational readiness. This is a subcontract opportunity issued by the Strategic Acquisition Program Directorate under the Department of Defense, with a solicitation posted on July 24, 2026, and a response deadline of August 25, 2026. The North American Industry Classification System code 493190 applies, indicating the nature of the work involves other support activities for transportation. Performance of the contract is expected to align with DoD logistics requirements, though specific performance locations are not detailed. Interested parties must submit proposals through the designated DIBBS portal prior to the deadline to be considered.

Other Warehousing and Storage

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Precision Machined Clutch Disk ManufacturingThe contract requires the manufacture of nonvehicle clutch disks meeting military specifications, identified by NSN 3010-01-164-7927, with strict adherence to material composition, dimensional tolerances, and performance requirements. All production must comply with applicable military standards and undergo First Article Testing to verify conformance before full-scale manufacturing can proceed, ensuring each unit meets exacting quality and reliability benchmarks for military use. The work is classified as a subcontract under NAICS code 332510 and is managed by the Strategic Acquisition Program Directorate under the Department of Defense. Responses must be submitted by August 25, 2026, with no solicitation number provided, and the place of performance and point of contact details are unspecified. The contract opportunity is publicly accessible via the DIBBS platform and is open to qualified subcontractors capable of fulfilling military-grade precision machining requirements without any set-aside restrictions. The focus is entirely on technical compliance, quality control, and the ability to deliver certified components critical to defense systems.

Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

in about 1 month

DISK, CLUTCH, NONVEHIThe contract solicitation SPE7LX-26-R-0025 seeks the supply of a nonvehicle clutch disk, identified by NSN 3010-01-164-7927, under an indefinite-delivery indefinite-quantity (IDIQ) firm-fixed-price structure administered by the Strategic Acquisition Program Directorate within the Department of Defense. The solicitation period opened on July 24, 2026, with proposals due by August 25, 2026, and is issued under NAICS code 332510 for machine shop, turned product, and screw machine products manufacturing. The award will be made using a trade-off methodology that evaluates price, past performance, proposed delivery, and surge and sustainment capability as equal factors, with price being the most heavily weighted. Offerors must submit pricing in a separate spreadsheet, with contract value bounded between a minimum of $23,992.14 and a maximum of $5,643,650.66 across a three-year base period and two one-year options. The contract includes multiple line items for related fasteners and washers, each with defined minimum and maximum order quantities per delivery order and annual demand estimates. Compliance with rigorous military packaging and marking standards is mandatory, following MIL-STD-2073-1E for preservation and packaging and MIL-STD-129 for labeling and barcode requirements. All materials must be labeled with NSN, contract number, lot and item identifiers, and special markings such as “Product Verification Test Samples – Do Not Post to Stock.” Preservatives containing mercury are strictly prohibited. Delivery must occur FOB destination within 110 days of order placement, and inspection and acceptance occur at the destination unless specified otherwise under a critical item PIC “C.” First Article Testing is required for two units, with a 120-day submission window for test reports and destruction of samples post-evaluation. Cybersecurity obligations require adherence to NIST SP 800-171 for protecting controlled unclassified information and include mandatory flow-downs to subcontractors. Contractors must also comply with prohibitions on ozone-depleting substances, inverted domestic corporations, and debarred entities, with deviations noted under DEVIATION 2026-00038. All invoices must be submitted electronically through Wide Area WorkFlow (WAWF), and past performance will be assessed via the Supplier Performance

Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Sustainable and Environmentally Compliant ManufacturingThis contract requires all manufacturing processes to adhere strictly to FAR 52.223-23, mandating full compliance with environmental regulations that prohibit the use of Class I ozone-depleting chemicals. Suppliers must source materials that meet eco-compliant standards and implement green manufacturing practices throughout production to ensure zero contamination from regulated substances. The emphasis is on sustainable sourcing, waste reduction, and environmentally responsible operations to align with federal mandates aimed at protecting the ozone layer and reducing ecological impact. The solicitation is classified as a subcontract under a Total Small Business Set-Aside as defined by FAR 19.5, exclusively available to small businesses certified by the SBA. It falls under NAICS code 541620, which pertains to environmental consulting services, indicating the need for technical expertise in environmental compliance and green manufacturing systems. The contract was posted on July 23, 2026, with responses due by July 28, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate. All work must be performed in compliance with the specified environmental standards, and no deviations from the prohibition of Class I ozone-depleting substances will be permitted under any circumstances.

Environmental Consulting Services

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingThis contract requires full compliance with OSHA’s Hazard Communication Standard and DFARS 252.223-7001 for the proper labeling of hazardous materials and the accurate management of Safety Data Sheets. It mandates the implementation and maintenance of a comprehensive hazard communication program that ensures all employees and stakeholders are informed of chemical hazards through standardized labels, SDS availability, and training protocols. The scope includes end-to-end regulatory adherence for hazardous substances used or handled under the contract, with specific attention to documentation accuracy, timely updates, and consistent application across all work sites. The contract is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses certified by the SBA, and is classified under NAICS code 541690 for other scientific and technical consulting services. It was posted by the Department of Defense’s Strategic Acquisition Program Directorate and requires responses to be submitted by July 28, 2026. Performance is expected to support defense-related operations, though the precise location of performance is not specified. The effort centers on ensuring regulatory rigor in hazardous material handling, with an emphasis on safety, compliance, and accountability under federal defense contracting requirements.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

CMMC Level 2 Cybersecurity ComplianceThe contract seeks a small business to implement and conduct a self-assessment for CMMC Level 2 compliance, ensuring alignment with NIST SP 800-171 standards and adherence to DFARS 252.204-7008 requirements. This includes developing a comprehensive System Security Plan that outlines policies, procedures, and controls necessary to protect controlled unclassified information within the organization’s information systems. The work requires a thorough understanding of federal cybersecurity frameworks and the ability to document and validate compliance through internal assessments and evidence collection. The effort is structured as a small business set-aside under SBA regulations, with the North American Industry Classification System code 541512 indicating it relates to computer systems design services. Performance of the contract is expected to be conducted under the purview of the Department of Defense’s Strategic Acquisition Program Directorate. Interested parties must respond by the deadline of July 28, 2026, and all activities must be executed in a manner that supports the defense acquisition mission, emphasizing rigorous security posture and regulatory accountability without reliance on external compliance verification beyond the provided self-assessment framework.

Computer Systems Design Services

POSTED

DEADLINE

Military-Compliant Packaging and LabelingThe contract encompasses the custom military packaging, marking, and labeling of seal caps in strict compliance with MIL-STD-129, FED-STD-313, and ASTM D3951 standards, including all required hazard communication labeling to meet federal military specification requirements. This work must be executed to ensure full interoperability and traceability within U.S. Department of Defense logistics systems, covering all stages from initial packaging through final labeling for shipment and delivery. The effort is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses qualify to respond, aligning with SBA and FAR 19.5 guidelines. The North American Industry Classification System code is 323111, indicating the work falls under printing and related support activities. The solicitation was posted on July 23, 2026, with a deadline for responses set for July 28, 2026. The contracting activity originates from the Strategic Acq Program Directorate within the Department of Defense, though specific location details for performance, office address, or point of contact are not provided. The contract is accessible through the DIBBS system under the reference number SPE7LX26U8624, and all potential offerors must ensure adherence to all technical, regulatory, and compliance requirements outlined in the referenced military and industry standards. Failure to meet any labeling, packaging, or marking specification will result in non-compliance and potential disqualification.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

Protective Dust and Moisture Seal Cap ManufacturingThe contract encompasses the manufacture of protective rubber seal caps identified by NSN 5340014464208, adhering strictly to SAE AS85049/138C specifications and military quality standards. The work includes all aspects of production from molding and finishing to rigorous inspection processes to ensure compliance with performance and durability requirements for dust and moisture protection. This is a subcontract solicitation set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside provision, with the NAICS code 326299 classifying the activity under other plastic product manufacturing. The opportunity was posted on July 23, 2026, with proposals due by July 28, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. The place of performance and exact office address are not specified, but the solicitation is accessible through the DIBBS platform under reference number SPE7LX26U8624.

All Other Rubber Product Manufacturing

POSTED

DEADLINE

Sustainable and Environmentally Compliant Packaging SupplyThe contract seeks the supply and implementation of sustainable packaging materials that comply with federal environmental mandates and MIL-STD-129 marking standards, ensuring alignment with Department of Defense requirements for uniformity, traceability, and environmental responsibility. The packaging must be engineered to meet rigorous military logistics specifications while minimizing ecological impact, incorporating recyclable, biodegradable, or reclaimed materials without compromising durability or performance during transport and storage. All submissions must adhere strictly to labeling, barcoding, and documentation protocols outlined in MIL-STD-129 to guarantee seamless integration into existing defense supply chains. This is a subcontract opportunity under NAICS code 322220, managed by the Strategic Acq Program Directorate within the Department of Defense, with a response deadline of July 28, 2026. The procurement emphasizes environmental stewardship and regulatory compliance as core objectives, making it essential for vendors to demonstrate proven experience in delivering compliant, sustainable packaging solutions for federal or military applications. While specific performance locations and contact details are not provided, interested parties must submit proposals through the designated DIBBS portal before the deadline to be considered. The emphasis on sustainability and military standards indicates a focus on long-term operational efficiency and environmental accountability across defense logistics.

Paper Bag and Coated and Treated Paper Manufacturing

POSTED

DEADLINE