Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Precision Metal Fabrication - Upper Litter Tray

Active

Federal

Response Deadline10/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the precision fabrication and assembly of one Upper Litter Tray for the DLA Weapons Support LSO Combat Vehicles and Armament. The scope of work includes cutting, bending, welding, and machining processes conducted in strict accordance with five technical drawings and NSN 2540-01-612-6868 specifications. Performance will take place in Starke, Florida, under NAICS code 332311. The contractor must maintain rigorous regulatory and security standards, including JCP certification, ITAR/EAR authorization, and CMMC Level 2 or NIST SP 800-171 compliance. Additionally, all materials used in production must adhere to the Buy American Act and Berry Amendment standards. Responses to this solicitation are due by October 19, 2026.

General Info

Fabricate one Upper Litter Tray per NSN specifications by October 19, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

NAICS

332311 - Prefabricated Metal Building and Component Manufacturing

Place of Performance

STARKE, FL, 32091-9794, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L4-27-T-0190.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TRAY, LITTER, UPPER

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 8

subcontract

Response DeadlineOct 19

Submission deadline

Response Deadline

10/19/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricates and assembles Upper Litter Trays for prime contractors on DLA Weapons Support projects. Performs cutting, bending, welding, and machining per five technical drawings and NSN 2540-01-612-6868 specifications. Requires JCP certification, ITAR/EAR authorization, and CMMC Level 2/NIST SP 800-171 compliance. Materials must meet Buy American Act and Berry Amendment standards. Delivers one completed Upper Litter Tray.

Similar Contracts

Same NAICS industry code

Prefabricated Storage Building SupplyThis subcontract agreement involves the manufacture and delivery of a prefabricated storage facility for prime contractors working on University of Worcester projects. The selected provider is responsible for supplying a storage unit measuring 20x8 meters that adheres to specific size requirements and base design standards. The scope of work includes providing detailed product information and supporting plans to ensure the structure meets all necessary specifications. The contract is categorized under NAICS code 332311 and was posted on October 12, 2026, with a response deadline of November 2, 2026. The final deliverable consists of a completed storage unit kit or structure delivered to the University of Worcester.

University of Worcester

POSTED

about 13 hours ago

DEADLINE

UOW997 - SJC Storage Unit

Solicitation # 2026/S 000-096276

The University of Worcester is soliciting proposals under solicitation number 2026/S 000-096276 for a contractor to manage the supply and installation of a new 20x8m storage facility. This project, categorized under building installation work and storage units, is estimated to take place over a one-month period from February 1, 2027, to February 28, 2027. Interested parties must submit their electronic tenders via the designated In-Tend portal by the deadline of November 2, 2026, at 11:59pm. The contract award will be determined by a weighted evaluation process where price and value for money carry the most significant weight at 75 percent. The remaining 25 percent of the evaluation is divided between the method statement at 10 percent, product information and supporting plans including base design requirements at 10 percent, and the project programme at 5 percent. All inquiries and submissions are managed through the University of Worcester at uwtenders@worc.ac.uk.

University of Worcester

POSTED

about 13 hours ago

DEADLINE

High–Altitude Electromagnetic Pulse Shielded Systems (HEMPSS) ISEA Support Contract (C)The High-Altitude Electromagnetic Pulse Shielded Systems (HEMPSS) ISEA Support Contract is a forecast opportunity issued by the Naval Information Warfare Systems Center Pacific. This requirement focuses on providing specialized support for shielded systems designed to withstand high-altitude electromagnetic pulses, with the primary place of performance located in San Diego. The project falls under NAICS code 332311 and is managed by the Niwc Pacific agency. Administrative oversight is provided by Contracting Officer Norman Julien and Secondary Point of Contact Emily F. Green.

POSTED

DEADLINE

Supply of Fire Extinguisher Cylinders (NSN 4210-01-711-7668 H5)This subcontract involves the supply of specialized high-pressure fire extinguisher cylinders, specifically NSN 4210-01-711-7668 H5, to support prime contractors under DLA Aviation supply contracts for the Department of Defense. The selected provider is responsible for either manufacturing or sourcing the cylinders, ensuring all packaging adheres to MIL-STD-2073 and container markings comply with MIL-STD-129. To qualify, the provider must maintain ISO 9000 certification and ensure that all pressure testing equipment is calibrated according to NCSL Z540.3 or ISO 10012 standards. The contract requires the delivery of completed cylinders, with a response deadline set for October 26, 2026.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Supply of Helical Compression Springs for Minesweeping CuttersThis subcontract involves the supply of specialized helical compression springs for minesweeping cutters supporting Naval Surface Warfare Center projects. The contractor is responsible for coiling and heat-treating the springs to exact specifications as outlined in Drawing 3286120 and 3286121, utilizing professional spring winding and tempering equipment. To ensure full traceability, the provider must submit comprehensive material certification data covering both chemical composition and mechanical properties. Performance of the contract will take place in Panama City Beach, Florida, with all deliverables required to meet the strict drawing requirements set forth by the Department of Defense.

Naval Surface Warfare Center

POSTED

DEADLINE

LADDER, SAFETY STEP

Solicitation # SPE8E5-27-T-0173

Solicitation SPE8E5-27-T-0173 is a fixed-price procurement issued by the Defense Logistics Agency Troop Support Construction and Equipment for one safety step ladder, specifically Louisville Ladder Inc part number FM1416HD (NSN 5440-01-590-9398). The item is to be delivered to the USS Harrisburg LPD-30 via Huntington Ingalls Inc. in Gulfport, Mississippi, with an original required delivery date of October 6, 2026. Shipping must be executed via the fastest traceable means, and parcel post is strictly prohibited. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA Master List Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled according to MIL-STD-129 and palletized per RP001. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and combating trafficking in persons. Offerors must also comply with domestic material restrictions and are prohibited from providing additive manufactured parts unless specifically authorized.

Defense Logistics Agency

POSTED

DEADLINE

Specialized Secure Modular FabricationThe Specialized Secure Modular Fabrication subcontract involves the manufacture and delivery of base modular structure panels and Certified Shielded Enclosures for prime contractors working on US Army Corps of Engineers projects. The scope of work requires the integration of RF shielding in accordance with NSA 94-106 and IEEE 299 standards, while ensuring the achievement of STC 50 acoustic attenuation. To maintain strict security protocols, all fabrication must take place at a secure location and be performed exclusively by U.S. Citizens. This Department of Defense initiative, managed through the W2V6 USA Engineering Spt Ctr Huntsville, falls under NAICS code 332311 and requires the final delivery of completed modular panels and enclosures.

W2V6 USA Engineering Spt Ctr Huntsvil

POSTED

DEADLINE

Modular Mission Support Facilities (Containerized)This subcontract involves the supply and integration of modular, containerized mission support facilities for prime contractors working on Air Force Life Cycle Management Center projects. The scope of work focuses on the fabrication of ruggedized, climate-controlled ISO containers designed for austere operational environments, featuring integrated equipment racks and specialized EMI/RFI shielding. Managed under the Department of Defense, the contract requires strict adherence to security and technical standards, specifically necessitating Secret clearance for personnel and compliance with NIST SP 800-171. The project falls under NAICS code 332311 and is associated with the Theater Battle Control division of the AFLCMC.

FA2204 Thtr Bttl Cntrl Aflcmc/hbd

POSTED

DEADLINE

Waste and Recycling Container SupplyThis subcontract agreement involves the supply and maintenance of waste and recycling containers for prime contractors working on projects for the New York State Office of Parks, Recreation and Historic Preservation. The scope of work requires the provision of 8-cubic yard dumpsters and large-capacity containers that are clean, functional, and equipped with necessary safety labels, doors, and plastic lids. All equipment must adhere to local environmental and safety standards. The contract spans a five-year term and includes responsibilities for the ongoing maintenance and replacement of the containers. Interested parties should note that the response deadline is November 2, 2026, with the project falling under NAICS code 332311.

NYS Office of Parks Recreation & Historic Preservation

POSTED

DEADLINE

IWQ 137769 Purchase of Climate Controlled Container

Solicitation # IWQ #137769

Gwinnett County Government is soliciting informal written quotations for the purchase of a climate controlled container to be delivered to the Gwinnett Sheriff's Office in Lawrenceville, Georgia. The required unit must measure 40 feet in length, 8 feet in width, and 9.6 feet in height, featuring a 1 1/8 inch marine plywood floor, lockable double doors, and a wind and watertight exterior painted light tan. Technical specifications include a 2-ton wall mounted commercial HVAC unit with 10KW heat and a digital programmable thermostat, a 100-AMP 120/240V electrical panel with two 110v duplex receptacles, three overhead LED lights, and an average of 2 inches of closed cell spray foam insulation on the interior walls and ceiling. The contract will be awarded to the lowest responsive and responsible vendor based on quality, conformity to specifications, suitability, and delivery terms. All items must be received by December 28, 2026, with shipping terms set as F.O.B. Destination, Freight Prepaid and Allowed. Vendors must submit sealed packages to the Gwinnett County Purchasing Division by October 13, 2026, including the County Fee Schedule, compliance sheets, and a non-collusion certification. Depending on requirements, a 5 percent bid bond, 100 percent performance bond, and 100 percent payment bond may be necessary. Payment will be issued via electronic payment after delivery and acceptance at the destination.

Gwinnett County Government

POSTED

DEADLINE

in about 15 hours

Supply of High-Precision Industrial SpringsThis subcontract for the Supply of High-Precision Industrial Springs involves the fabrication and delivery of high-tension or precision-compression springs intended for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The scope of work requires the use of high-grade alloy steel to produce individual spring components specifically for spring-loaded shaft seal assemblies. To ensure quality and compliance, the provider must furnish all necessary material certifications and mill test reports in accordance with the DLA Master List of Technical and Quality Requirements. The project falls under NAICS code 332311 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on October 7, 2026, with a response deadline set for October 19, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Fabrication and Supply of Drip Pans (NSN 4940016299882)This subcontract involves the fabrication and supply of 55 manufactured drip pans under NSN 4940016299882 for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The contractor is required to produce the pans according to Part Number AP101231 and DLA Master List technical requirements RA001, with a specific prohibition on the use of hexavalent chromium. The agreement mandates strict adherence to the Buy American Act and requires packaging, marking, and palletization in accordance with MIL-STD-129, ASTM D3951, and RP001. Performance for this contract will take place in Texarkana, Texas, under NAICS code 332311.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

Supply of Hexagon Head Cap Screws (NSN 5305016867008)This subcontract involves the supply of 40 specialized hexagon head cap screws for prime contractors supporting DLA Weapons Support projects. The required components must match NSN 5305016867008 and BAE Systems P/N 3000028-025062, adhering strictly to RA001 quality requirements. All items must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129 standards, with delivery terms set as FOB Origin to Tracy, California. Compliance is mandatory regarding the Buy American Act and the Berry Amendment, and the provider must meet NIST SP 800-171 cybersecurity standards. This opportunity falls under NAICS code 332722 and is managed by the Department of Defense for the DLA Weapons Support LSO Combat Vehicles and Armament.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Hazardous Materials Handling

Freight Transportation Arrangement

POSTED

DEADLINE

Supply of Directional Signal Arms (NSN 2540-01-355-6593)

Other Motor Vehicle Parts Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Marking for HardwareThis subcontract involves providing specialized military-grade packaging and marking services for the Department of Defense, specifically supporting DLA Weapons Support LSO Combat Vehicles and Armament projects. The scope of work requires the packaging of 37 units of springs in accordance with ASTM D3951, marking per MIL-STD-129, and palletization following RP001 DLA Packaging Requirements. All tasks must be completed using MIL-SPEC packaging materials and labeling equipment to ensure compliance with strict military standards. The final deliverables are to be shipped to Arizona Industries for the Blind, with the place of performance located in Phoenix, Arizona. This project falls under NAICS code 493110 and was posted on October 8, 2026, with a response deadline of October 19, 2026.

General Warehousing and Storage

POSTED

DEADLINE

Manufacturing of Helical Compression Springs (NSN 5360015001927)This subcontract involves the manufacture of 37 helical compression springs for the Department of Defense, specifically supporting DLA Weapons Support LSO Combat Vehicles and Armament projects. The contractor is responsible for fabricating the units according to BAE Systems part number 105502-1 using specialized spring winding and coiling machinery. Performance will take place in Phoenix, Arizona, under NAICS code 332510. The project mandates strict adherence to quality assurance sampling per MIL-STD-1916 or ASQ H1331 and requires compliance with DFARS 252.204-7012 cybersecurity standards. Additionally, all delivered components must be compliant with the Buy American Act. The solicitation was posted on October 8, 2026, with a response deadline of October 19, 2026.

Hardware Manufacturing

POSTED

DEADLINE

Vehicular Seat Assembly (NSN 2540-20-010-5798)This subcontract involves the manufacture or sourcing of finished vehicular seat assemblies, specifically NSN 2540-20-010-5798, Part SW-04401, to support prime contractors for the DLA Weapons Support LSO Combat Vehicles and Armament. A critical requirement of the production process is that the seats must be produced without the use of hexavalent chromium or Class I ozone-depleting chemicals. The contractor is responsible for ensuring strict adherence to quality assurance standards per MIL-STD-1916 or ASQ H1331, with packaging and marking following MIL-STD-2073-1E and MIL-STD-129. The final deliverable consists of one palletized vehicular seat to be delivered to ACU 5 at MCB Camp Pendleton, California.

Other Motor Vehicle Parts Manufacturing

POSTED

DEADLINE

Supply of Groove Pulleys (NSN 3020015539632)This subcontract involves the procurement and delivery of two groove pulleys for prime contractors supporting the DLA Weapons Support LSO Combat Vehicles and Armament projects. The required components must match NSN 3020015539632 and Terex Cranes Germany GmbH part number 47069612. All items must be packaged according to ASTM D3951 and MIL-STD-129 standards and palletized per RP001. The contractor is required to comply with the Buy American Act and the Berry Amendment. Delivery of the pulleys is designated as FOB Origin to DLA Distribution San Joaquin in Tracy, California. The solicitation was posted on October 8, 2026, with a response deadline of October 19, 2026, under NAICS code 423830.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

FDT Compliant Freight ShippingThis subcontract involves the transportation of palletized industrial parts for prime contractors supporting Department of Defense supply contracts under the First Destination Transportation program. The selected provider will be responsible for hauling shipments to Richmond, Kentucky, ensuring all palletized goods are handled in strict accordance with DLA requirement RP001. The contract is established as FOB Destination/Inspection and requires the contractor to have the technical capability to process receiving reports through the Wide Area WorkFlow system. This opportunity is managed by the DLA Weapons Support LSO Combat Vehicles and Armament, with a response deadline set for October 19, 2026.

General Freight Trucking, Long-Distance, Truckload

POSTED

DEADLINE

Vehicular Door Latch ManufacturingThis subcontract involves the manufacture of vehicular door latch assemblies for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support LSO Combat Vehicles and Armament. The contractor is responsible for fabricating latch mechanisms according to NSN 2540-01-733-3051 and the DLA Master List of Technical and Quality Requirements. Production must utilize precision machining and adhere to zero-based sampling plans under MIL-STD-1916 or ASQ H1331, with final products delivered palletized per requirement RP001. The project requires strict compliance with DFARS 252.204-7012 and falls under NAICS code 332510. Performance of the contract will take place in Richmond, Kentucky. Interested parties must note the response deadline of October 19, 2026.

Hardware Manufacturing

POSTED

DEADLINE

Roller Chain Manufacturing and SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament agency, requires the manufacture and supply of three units of warranted continuous roller chains. Each chain must be 165 feet in length and produced in strict accordance with MIL-C-23842B and TDP Rev B Gen 2 specifications. The contract mandates bare item marking per RQ017 and adherence to MIL-STD-2073-1E and MIL-STD-129 for packaging. The project is designated as a Total Small Business Set-Aside under NAICS code 332510, with performance taking place in Tracy, California. Strict prohibitions are in place regarding the use of additive manufacturing and Class I Ozone Depleting Chemicals. Interested parties must have responded by the deadline of October 19, 2026.

Hardware Manufacturing

POSTED

DEADLINE

MIL-STD-2073 Compliant Packaging and Shipping

Freight Transportation Arrangement

POSTED

DEADLINE

Berry Amendment Compliant Upholstery and Foam Supply

Confectionery Merchant Wholesalers

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS