Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Precision Metal Tube Fabrication (Bending & Beading)

Open

Federal

Response Deadline11/16/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Precision Metal Tube Fabrication involves the bending and beading of metallic tubes for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires bending 5.50 inch OD, 16 GA tubes to the specific geometry of NSN 4710-01-163-3520 and beading both ends using industrial flaring and bending equipment. A total of 11 finished tubes must be delivered, with all quality assurance performed in accordance with MIL-STD-1916 or ASQ H1331 standards. The project is categorized under NAICS code 332996 and is managed by the Department of Defense. Performance of the work will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 16, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

332996 - Fabricated Pipe and Pipe Fitting Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-27-T-2645.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TUBE, BENT, METALLIC

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 12:00:00 PM ESTin 10 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs bending and beading of metallic tubes for prime contractors on DLA Weapons Support Fluid Handling Division projects. Bends 5.50 inch OD, 16 GA tubes to NSN 4710-01-163-3520 geometry and beads both ends using industrial bending and flaring equipment. Performs quality assurance per MIL-STD-1916 or ASQ H1331. Delivers 11 finished, bent, and beaded metallic tubes.

Similar Contracts

Same NAICS industry code

Water Pipe and Fitting SupplyThis subcontract for Water Pipe and Fitting Supply involves providing essential materials for prime contractors working on Hawaii Department of Land and Natural Resources facility projects. The scope of work includes the supply of 1.5 inch and 2 inch HDPE pipe along with associated tees, elbows, reducers, and ball valves, as well as Ductile Iron pipe that meets ANSI A-21.10 and AWWA C110 standards. All specified piping and fittings are to be delivered to the Port Allen SBH site. The opportunity was posted on November 5, 2026, with a response deadline of November 14, 2026, and is categorized under NAICS code 332996.

Department of Land & Natural Resources

POSTED

about 13 hours ago

DEADLINE

IWQ 138769 Purchase of Ductile Iron Pipe Bends

Solicitation # 138769

The Gwinnett County Government is soliciting bids for the purchase of ductile iron pipe bends under solicitation number 138769. This procurement is managed by the Gwinnett County Department of Financial Services and is performed in Georgia. The solicitation was posted on November 5, 2026, with a response deadline of November 9, 2026. The County reserves the right to award the contract to a single vendor, multiple vendors, or only a portion of the agreement based on its best interest, with ties in proposal scores being resolved by selecting the lowest cost. To be deemed responsive, bidders must submit a variety of critical documents, including the County Fee Schedule, compliance and specification sheets, and all applicable addenda. Depending on the contract value and specific requirements, a bid bond, a contractor affidavit and agreement, and an ethics affidavit for solicitations exceeding $100,000 are required. Additionally, bidders must provide at least three references for work of a similar size and scope. Accepted bidders are required to submit a bid deposit of at least $5,000 as earnest money, which is refunded once the contract is awarded. Payment is contingent upon the County's written final acceptance and delivery of the items.

Gwinnett County Government

POSTED

about 16 hours ago

DEADLINE

Fabrication of Metallic Pipe Assemblies (NSN 4710-01-152-5544)This subcontract involves the fabrication of metallic pipe assemblies for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires cutting, bending, and forming metallic piping to meet the specifications of NSN 4710-01-152-5544 and Oshkosh Defense part number 2228520W. All production must strictly adhere to the DLA Master List of Technical and Quality Requirements (RA001), and the use of additive manufacturing is explicitly prohibited. The contractor is responsible for delivering 12 completed and packaged assemblies in accordance with MIL-STD-129. Performance for this project will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 16, 2026, for this requirement categorized under NAICS code 332996.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

Supply of Fluid Flow Restrictors (NSN 4730007833781)This subcontract involves the supply of five specialized fluid flow restrictors, part number 128A2007, conforming to NSN 4730007833781 specifications for the DLA Weapons Support Fluid Handling Division. The selected provider is responsible for manufacturing or sourcing the units, ensuring they meet Critical Application Item quality control standards, and executing palletization in accordance with RP001 DLA Packaging Requirements. The contract requires strict compliance with the Buy American Act under DFARS 252.225-7001. Performance will take place in Jacksonville, Florida, under NAICS code 332996. The response deadline for this requirement is November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

Nut Assembly, Tube Coupling (Half Connector) SupplierThis subcontract involves the supply of 30 nut assemblies for tube coupling half connectors to support prime contractors under the Defense Logistics Agency Weapons Support Fluid Handling Division. The supplier is responsible for manufacturing or sourcing hardware that strictly adheres to NSN 4730004385304, utilizing precision machining and metal fabrication techniques. Logistics for the order are managed through the First Destination Transportation program, with the place of performance located at Robins Air Force Base. The procurement falls under NAICS code 332996 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

Precision Metallic Tube FabricationThe Precision Metallic Tube Fabrication subcontract involves the bending, machining, and finishing of 75 seamless steel tubes for the DLA Weapons Support Fluid Handling Division. The scope of work requires CNC tube bending of 2.000 inch diameter tubing, precision machining of specific bead dimensions, the integration of a 0.785 inch OD tube surge tank inlet, and the installation of a boss drain cock. Performance will take place in New Cumberland. To be eligible, contractors must maintain CMMC Level 2 and ISO 9001:2015 certifications and be registered with ITAR and EAR. This opportunity is categorized under NAICS code 332996, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

Solar Turbines Critical Application Item SupplyThis subcontract with the Department of Defense DLA Weapons Support Fluid Handling Division requires the supply of 23 units of Solar Turbines Incorporated part number 23693R1. The contractor is responsible for manufacturing or sourcing these critical application items while ensuring strict compliance with NAVSEA restrictions regarding the intentional addition of mercury. The agreement mandates adherence to specific military standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, as well as the Hazard Communication Standard 29 CFR 1910.1200. Performance for this contract is centered in Tracy, California, under NAICS code 332996.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

CRES Tube Assembly FabricationThis subcontract involves the fabrication of 20 CRES tube assemblies under NSN 4710-01-200-6145 for the DLA Weapons Support Fluid Handling Division in support of M-1 Tank projects. The scope of work includes forming tubing and welding attached flanges and bellows in strict accordance with Basic Drawing NR 19207 12324175 Revision A. Performance will take place in New Cumberland, Pennsylvania. To be eligible, the contractor must maintain CMMC Level 2 certification and adhere to Critical Application Item quality standards. The project falls under NAICS code 332996, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

Supply of Titanium Alloy Concentric Tube ReducersThis subcontract, issued by the DLA Weapons Support Fluid Handling Division under the Department of Defense, requires the procurement of 168 concentric-type tube reducers. The contractor is responsible for manufacturing or sourcing part number MR54035T12 using titanium alloy in strict accordance with Parker-Hannifin 50599 specifications. Due to the nature of the components, the project must adhere to Critical Application Item quality standards and DLA Packaging Requirements RP001. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332996, with the place of performance located in Tracy, California. All deliverables must be packaged according to RP001 standards and delivered to support prime contractors on DLA supply contracts.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

Aluminum Adapter Assembly SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support Fluid Handling Division, involves the supply of 28 aluminum adapter assemblies for government procurement projects. These straight tube-to-hose adapters are designed for a 0.625 inch nominal tube OD and a 0.500 inch nominal hose ID and feature a swivel nut. The components are designated as critical application items and must strictly adhere to the technical specifications for NSN 4730-00-842-1138. Performance for this contract is centered at Robins Air Force Base, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

Manufacturing of Reducer, Boss (NSN 4730-01-542-9033)This subcontract involves the manufacture and supply of 51 Reducer, Boss (Tube) components for the DLA Weapons Support Fluid Handling Division under the Department of Defense. The contractor is responsible for fabricating these parts to NSN 4730-01-542-9033 specifications using precision machining and metal fabrication equipment. All units must be delivered properly marked and heat-sealed in barrier bags to ensure quality and protection. Compliance is mandatory regarding MIL-STD-129 marking and FAR 52.204-24/DFARS 252.204-7016 standards. The project falls under NAICS code 332996, with the place of performance located in Tracy, California. The response deadline for this requirement is November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

Pipe Plug Manufacturing and SupplyThis subcontract involves the manufacturing and supply of two specialized pipe plugs for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The supplier is responsible for ensuring that all units meet the material requirements of NSN 4730011161391 and adhere strictly to RP001 DLA Packaging Requirements. Additionally, the provider must supply Safety Data Sheets that comply with Federal Standard No. 313 and 29 CFR 1910.1200(g). The project falls under NAICS code 332996 and will be performed in Jacksonville, Florida. Interested parties must respond by November 16, 2026, following the posting date of November 5, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

Metallic Hose and Ferrule SupplyThis HUBZone set-aside subcontract, managed by the DLA Weapons Support Fluid Handling Division of the Department of Defense, involves the supply of raw metallic tubing and precision-machined ferrules. The materials must consist of high-grade metallic alloys that adhere to STA 563.89 engine feed requirements. To ensure compliance with DLA technical specifications, the provider is required to furnish all necessary material certifications and Mill Test Reports. The scope of work requires the delivery of these components directly to prime contractors who are fulfilling DLA supply contracts. Performance for this contract is centered at Hill AFB. Interested parties should note the response deadline of November 16, 2026, for this procurement categorized under NAICS code 332510.

Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

Metallic Hose Assembly Fabrication (Engine Feed)This HUBZone set-aside subcontract, issued by the DLA Weapons Support Fluid Handling Division of the Department of Defense, requires the manufacture and supply of a metallic engine feed hose assembly for prime contractors. The scope of work involves fabricating the hose to a precise length of 45.45 inches with a tolerance of 0.45 inches, installing ferrules, and conducting a mandatory three-minute pressure test. All finished assemblies must be marked and labeled in accordance with MIL-STD-129, specifically including shelf-life information. The project necessitates the use of precision cutting tools and specialized pressure testing apparatus to ensure compliance with technical specifications. Performance will take place at Hill AFB, and the final deliverable is the completed Hose Assy - Engine Feed, STA 563.89 with ferrules installed. Interested parties must respond by November 16, 2026.

Prefabricated Metal Building and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

Gasket Supply (NSN 5330011330920)

All Other Miscellaneous Manufacturing

POSTED

about 18 hours ago

DEADLINE

Aerospace Surface Treatment and CoatingThis subcontract for Aerospace Surface Treatment and Coating involves providing specialized surface treatments and coatings for Pump Cover P/N DS-922542. Working under the DLA Weapons Support Fluid Handling Division of the Department of Defense, the contractor is responsible for applying protective coatings, plating, or finishes that adhere to the DLA Master List of Technical and Quality Requirements. The work requires the use of industrial plating or anodizing equipment to ensure all components meet strict corrosion and wear specifications before final delivery. The project is categorized under NAICS code 332813 and will be performed at Hill AFB. Interested parties should note the response deadline of November 16, 2026, following the posting date of November 5, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 18 hours ago

DEADLINE

Supply of Certified Aerospace Raw MaterialsThis subcontract involves the supply of certified aerospace raw materials, including raw billets, castings, or forgings, to prime contractors supporting the DLA Weapons Support Fluid Handling Division. The materials are specifically required for the manufacture of Pump Cover P/N DS-922542 and must strictly adhere to established aerospace specifications. The selected provider is responsible for delivering essential documentation with the materials, including Material Test Reports, Certificates of Conformance, and Safety Data Sheets in compliance with 29 CFR 1910.1200(g). Performance for this contract is centered at Hill AFB, with a response deadline set for November 16, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 18 hours ago

DEADLINE

Precision Machining and Assembly of Pump CoversThis subcontract involves the precision machining and assembly of five Pump Cover Assemblies, specifically part number DS-922542 under NSN 1650-00-790-9720, for the Department of Defense DLA Weapons Support Fluid Handling Division. The work must be performed at Hill AFB and requires strict adherence to the DLA Master List of Technical and Quality Requirements, utilizing CNC machining and specialized inspection equipment for Critical Application Items. Quality assurance is a primary requirement, with mandatory sampling conducted according to MIL-STD-1916 or ASQ H1331 standards. The project falls under NAICS code 336413, with a response deadline set for November 16, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

O-Ring Supply (NSN 5331-01-013-9653)This subcontract involves the manufacture and supply of 138 asbestos-free O-rings for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The items must be produced according to NSN 5331-01-013-9653 specifications and delivered FOB Origin to Tracy, California. The contractor is required to adhere to strict quality assurance and packaging standards, including MIL-STD-1916 or ASQ H1331 for quality, and MIL-STD-2073-1E and MIL-STD-129 for marking. All items must be sealed in MIL-DTL-117 waterproof, greaseproof, and opaque bags. Additionally, the supplier must maintain full compliance with the Buy American Act and the Berry Amendment.

All Other Plastics Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

Precision Casting and Forging for Fuel Pump ComponentsThis subcontract involves the precision casting and forging of raw structural components for fuel pump parts, specifically identified by NSN 2910003557669, to support prime contractors under DLA supply contracts. The selected provider will utilize industrial casting furnaces or forging presses to produce high-grade alloy blanks according to strict technical specifications, which are then delivered to the prime manufacturer for final machining. Managed by the Department of Defense under the DLA Weapons Support Fluid Handling Division, the project is categorized under NAICS code 332997 and requires full compliance with Buy American regulations. Performance will take place in Albany, and the solicitation period runs from November 5, 2026, through November 16, 2026.

Industrial Pattern Manufacturing

POSTED

about 18 hours ago

DEADLINE

Engine Fuel Pump Kit Fabrication and SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support Fluid Handling Division, involves the fabrication and supply of 18 complete parts kits for engine fuel pumps, identified by NSN 2910003557669. The scope of work requires precision fabrication of components and kit assembly utilizing specialized tooling, casting, and forging processes to support prime contractors on DLA supply contracts. The contractor must ensure strict adherence to MIL-STD-2073-1 Appendix D and MIL-STD-129 for all packaging and marking requirements. Additionally, a CMMC Level 2 self-assessment is mandatory for compliance. Performance of the contract will take place in Albany, Georgia, under NAICS code 333611.

Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 18 hours ago

DEADLINE

Cadmium Plating Services for Steel FittingsThis subcontract involves providing specialized cadmium plating services for the DLA Weapons Support Fluid Handling Division. The scope of work requires the surface preparation and application of cadmium plating on 128 steel street elbows to ensure they meet strict corrosion resistance specifications. All work must be performed in compliance with hazardous materials labeling standards per 29 CFR 1910.1200 and requires the necessary environmental permits for cadmium processing. The project is categorized under NAICS code 332813 and will be performed in New Cumberland. Interested parties must respond by November 16, 2026, to provide the finished cadmium-plated steel elbows as required by the Department of Defense.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 18 hours ago

DEADLINE

Manufacturer of Steel Street Elbows (NSN 4730-01-059-4126)This subcontract involves the manufacture and delivery of 128 steel street elbows for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The required components must feature a 90-degree flow angle, a 1-1/4 inch nominal pipe size, and female NPTF to male NPTF threads capable of withstanding a 3000 PSI pressure rating. The use of additive manufacturing is strictly prohibited for the production of these fittings. To be eligible, the provider must maintain US/Canada Joint Certification Program certification and ensure full compliance with ITAR and EAR regulations. The project is categorized under NAICS code 332710, with performance taking place in New Cumberland. Interested parties must respond by November 16, 2026.

POSTED

about 18 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract involves providing specialized military-grade packaging, marking, and palletization services for the Department of Defense, specifically under the DLA Weapons Support Fluid Handling Division. The scope of work requires the processing of 1,863 tube caps to be delivered via FOB Origin shipment. All activities must strictly adhere to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization, utilizing specific unit and intermediate container configurations. The project is categorized under NAICS code 333613 and will be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 16, 2026, for this specialized logistics requirement supporting prime contractors on DLA projects.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS