Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Metallic Hose Assembly Fabrication (Engine Feed)

Open

Federal

Response Deadline11/16/2026, 10:00:00 AM MST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This HUBZone set-aside subcontract, issued by the DLA Weapons Support Fluid Handling Division of the Department of Defense, requires the manufacture and supply of a metallic engine feed hose assembly for prime contractors. The scope of work involves fabricating the hose to a precise length of 45.45 inches with a tolerance of 0.45 inches, installing ferrules, and conducting a mandatory three-minute pressure test. All finished assemblies must be marked and labeled in accordance with MIL-STD-129, specifically including shelf-life information. The project necessitates the use of precision cutting tools and specialized pressure testing apparatus to ensure compliance with technical specifications. Performance will take place at Hill AFB, and the final deliverable is the completed Hose Assy - Engine Feed, STA 563.89 with ferrules installed. Interested parties must respond by November 16, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

332311 - Prefabricated Metal Building and Component Manufacturing

Place of Performance

HILL AFB, UT, 84056-5734, USA

Set-Aside

HZC

Documents

This scope was carved out of SPE7M4-27-T-2607.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HOSE ASSEMBLY, METALLIC

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 10:00:00 AM MSTin 10 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures and supplies a metallic hose assembly for prime contractors delivering DLA supply contracts. Fabricates hose to 45.45 IN +/- 0.45 IN, installs ferrules, and performs a 3-minute pressure test. Applies marking and labeling per MIL-STD-129, including shelf-life markings. Requires precision cutting and pressure testing apparatus. Delivers the finished HOSE ASSY - ENGINE FEED, STA 563.89 WITH FERRULES INSTALLED.

Similar Contracts

Same NAICS industry code

Supply of Water Distribution Nozzles (NSN 4730-01-039-9968)This subcontract involves the manufacture or sourcing of 61 water distribution nozzles under NSN 4730-01-039-9968 for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The contractor must ensure all units meet strict technical specifications and adhere to RP001 DLA Packaging Requirements for Procurement, with delivery managed via First Destination Transportation. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332311, with the place of performance located in Tracy, California. Interested parties must respond by November 16, 2026, to fulfill the supply requirements for this defense contract.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

Precision Steel Tube ManufacturingThis subcontract involves the precision manufacturing of 130 metallic steel tubes for prime contractors supporting DLA Weapons Support projects for M881 Recovery Vehicles. The tubes must be fabricated to a 1-3/4 inch outer diameter and 0.250 inch wall thickness in accordance with Basic Drawing NR 19207 6300620, utilizing MT1010 or MT1015 material per ASTM A512, A513, or A519 standards. All finished products must be properly marked and packaged for delivery. To qualify, the manufacturer must hold ISO 9001 or SAE AS9003 certification and maintain compliance with DFARS 252.204-7012. The project falls under NAICS code 332311 and is managed by the Department of Defense DLA Weapons Support Fluid Handling Division, with the place of performance located in New Cumberland. The response deadline for this opportunity is November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

Fabrication and Supply of Mirror Cross BracesThis subcontract involves the fabrication and supply of 165 Mirror Cross Braces for prime contractors supporting the DLA Weapons Support LSO Combat Vehicles and Armament projects. The scope of work requires the production of units under NSN 2540011555117 and technical data for part numbers 158-0MC-81 and 2AT404. All deliverables must strictly adhere to the Buy American Act standards and the DLA Master List of Technical and Quality Requirements RA001. The completed hardware components are to be delivered to DLA Distribution San Joaquin, with the place of performance located in Tracy, California. This procurement falls under NAICS code 332311 and is managed by the Department of Defense. The response deadline for this requirement is November 16, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 18 hours ago

DEADLINE

Bracket Assembly (NSN 1710009452364) SupplyThis subcontract involves the manufacture and supply of two bracket assemblies under NSN 1710009452364 for the Defense Logistics Agency Weapons Support Nuclear Reactor Program. The contractor is required to produce the units strictly according to technical data drawings, with a specific prohibition against the use of additive manufacturing. Performance will take place in San Diego, California, under NAICS code 332311. The contract mandates strict adherence to military standards for marking, packaging, and quality assurance, specifically citing MIL-STD-129, MIL-STD-2073-1E, MIL-STD-1916, and MIL-STD-105/ASQ Z1.4. Additionally, the supplier must ensure full NAVAIR ALRE traceability for the finished assemblies. The final deliverable consists of two completed, marked, and packaged bracket assemblies delivered to the prime contractor.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 18 hours ago

DEADLINE

Supply of Helical Compression SpringsThis subcontract, managed under the Department of Defense DLA Weapons Support Fluid Handling Division, involves the production and supply of 68 helical compression springs. These components are designated as Critical Application Items under part number V2B10613-1 and NSN 5360010612937, requiring strict adherence to material certification and high-precision tolerance standards to support prime contractors. The contract is categorized under NAICS code 332311 and specifies delivery terms as FOB Origin. Performance for this requirement is centered in Greensboro, North Carolina, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

Maintenance Platform Manufacturer/SupplierThis subcontract, issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division, requires the fabrication or sourcing of one Maintenance Platform for prime contractors. The supplier must adhere strictly to technical data requirements found on the DLA portal and ensure that all supplies are of domestic origin. Delivery of the completed platform is required at the specified DLA location in New Cumberland. Compliance is mandatory regarding marking and shipment standards, specifically MIL-STD-129 for all items and containers, and 29 CFR 1910.1200 for the labeling of hazardous materials. Interested parties must respond by November 16, 2026, under NAICS code 332311.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 18 hours ago

DEADLINE

Provide and Install 85' x 60' Fabric Structure

Solicitation # 270006555

The City of Richmond, Virginia, is soliciting quotes for the provision and installation of a clear span fabric structure measuring 85 feet wide by 60 feet high. The project, located at 802 Forest Lawn Dr, requires a steel frame with five open web trusses and flame retardant fabric. The structure must be installed on existing 6-foot tall blocks and remain open on both end walls. Delivery is required by December 31, 2026, with final project completion and installation set for April 1, 2027. The contract will be awarded to the lowest acceptable quote. Bidders must be authorized to transact business in Virginia, provide a State Corporation Commission identification number, and certify they are not debarred from government contracting. Mandatory requirements include comprehensive insurance coverage, including General Liability, Auto Liability, and Workers Compensation with a minimum of 1 million dollars per occurrence for liability policies. Payment terms are Net 45 days, subject to annual appropriations by the City Council. All bids must be submitted electronically via the OpenGov portal by the specified deadline.

POSTED

about 20 hours ago

DEADLINE

Guard Booth Supplier & InstallerThis subcontract opportunity involves the supply and installation of prefabricated guard booths for prime contractors working on USACE Engineering Support Center Huntsville projects located at Fort Lee, Virginia. The scope of work includes the delivery and strategic placement of the booths, as well as the necessary connections to site utilities to ensure the identification-check infrastructure is fully operational. The selected provider must strictly adhere to EM 385-1-1 safety standards to ensure compliance with Department of Defense requirements. The final deliverable is the provision of fully installed and functional guard booths. Interested parties should note the response deadline of November 18, 2026.

W2V6 USA Engineering Spt Ctr Huntsvil

POSTED

about 23 hours ago

DEADLINE

Arkabutla Lake Water Plant Rehab and Pre-fabricated Metal Building Installation

Solicitation # W912EE27QA002

Solicitation W912EE27QA002 is a request for a firm-fixed-price contract issued by the U.S. Army Corps of Engineers, Vicksburg District, for the Arkabutla Lake Water Plant Rehab and Pre-fabricated Metal Building Installation in Hernando, Mississippi. The project is a turn-key effort requiring the abandonment of an old well and the installation of a 30 by 50 foot Red Iron open span pre-fabricated metal building to protect a new well. Key technical requirements include the installation of new plumbing meeting AWWA C-509 specifications, comprehensive electrical upgrades compliant with 2020 NEC standards, and the sandblasting and painting of a potable water tank using specific Tnemec and urethane coatings. The building must feature 12 foot eaves, 26-gauge roof and walls, R19 fiberglass insulation, and include engineer stamped drawings and anchor bolt plans. The contract is designated as an unrestricted solicitation under NAICS code 332311, with a performance period of 120 calendar days from the date of award. Award will be granted to the lowest priced quote that is determined successful based on evaluation factors including the decommissioning plan, staff licensing, building spec sheets, and installation methodology. Contractors are responsible for all labor, materials, and transportation to the destination. Compliance with various federal regulations is required, including the Buy American Act and CMMC cybersecurity standards. All invoices must be processed through the Wide Area WorkFlow system, and site access is subject to federal security and force protection measures.

W07V Endist Vicksburg

POSTED

about 23 hours ago

DEADLINE

in about 10 hours

Modified ISO Container FabricationThis subcontract involves the fabrication of modified ISO containers to be used as mobile laboratories for prime contractors working on National Research Council of Canada projects. The scope of work requires the conversion of standard containers through the installation of environmental controls, lighting, shelving, and workbenches equipped with 110 VAC outlets. Additionally, the units must be outfitted with 208 VAC 60 Hz three-phase shore power. To ensure safety and compliance, the contractor must provide electrical and HVAC certification for all modifications before delivering the fully outfitted containers. This project is managed under the Government of Canada and the National Research Council of Canada, with a response deadline set for November 30, 2026.

National Research Council of Canada

POSTED

DEADLINE

Manufacture and Supply of Diesel Engine GuardsThis subcontract involves the manufacture and supply of 31 diesel engine guards for prime contractors supporting DLA supply contracts. The guards must be fabricated according to NSN 2815015237137 and Hatz Diesel P/N 01551401 specifications, with a strict prohibition on the use of additive manufacturing. All units must be packaged in accordance with ASTM D3951 and RP001 and marked per MIL-STD-129. The completed guards are to be delivered to DLA Dist San Joaquin in Tracy, California. This requirement is managed by the Department of Defense under the DLA Weapons Support Land Supplier Opns Engines agency, falling under NAICS code 332311.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Supply of Special Shaped Non-Metallic SealsThis subcontract involves the supply of 817 linear feet of special-shaped non-metallic seals for prime contractors supporting the Defense Logistics Agency Weapons Support Land Supplier Operations Vehicle Support. The selected provider must manufacture or source seals that strictly adhere to the dimensions and material specifications of NSN 5330-01-535-5213, utilizing precision molding or extrusion equipment to ensure compliance. Eligible bidders are required to possess a valid CAGE code and Unique Entity Identifier. The performance of this contract will take place in Tracy, California. Interested parties must submit their responses by November 16, 2026, in accordance with the solicitation posted on November 4, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

Metallic Hose and Ferrule SupplyThis HUBZone set-aside subcontract, managed by the DLA Weapons Support Fluid Handling Division of the Department of Defense, involves the supply of raw metallic tubing and precision-machined ferrules. The materials must consist of high-grade metallic alloys that adhere to STA 563.89 engine feed requirements. To ensure compliance with DLA technical specifications, the provider is required to furnish all necessary material certifications and Mill Test Reports. The scope of work requires the delivery of these components directly to prime contractors who are fulfilling DLA supply contracts. Performance for this contract is centered at Hill AFB. Interested parties should note the response deadline of November 16, 2026, for this procurement categorized under NAICS code 332510.

Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

Gasket Supply (NSN 5330011330920)

All Other Miscellaneous Manufacturing

POSTED

about 18 hours ago

DEADLINE

Aerospace Surface Treatment and CoatingThis subcontract for Aerospace Surface Treatment and Coating involves providing specialized surface treatments and coatings for Pump Cover P/N DS-922542. Working under the DLA Weapons Support Fluid Handling Division of the Department of Defense, the contractor is responsible for applying protective coatings, plating, or finishes that adhere to the DLA Master List of Technical and Quality Requirements. The work requires the use of industrial plating or anodizing equipment to ensure all components meet strict corrosion and wear specifications before final delivery. The project is categorized under NAICS code 332813 and will be performed at Hill AFB. Interested parties should note the response deadline of November 16, 2026, following the posting date of November 5, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 18 hours ago

DEADLINE

Supply of Certified Aerospace Raw MaterialsThis subcontract involves the supply of certified aerospace raw materials, including raw billets, castings, or forgings, to prime contractors supporting the DLA Weapons Support Fluid Handling Division. The materials are specifically required for the manufacture of Pump Cover P/N DS-922542 and must strictly adhere to established aerospace specifications. The selected provider is responsible for delivering essential documentation with the materials, including Material Test Reports, Certificates of Conformance, and Safety Data Sheets in compliance with 29 CFR 1910.1200(g). Performance for this contract is centered at Hill AFB, with a response deadline set for November 16, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 18 hours ago

DEADLINE

Precision Machining and Assembly of Pump CoversThis subcontract involves the precision machining and assembly of five Pump Cover Assemblies, specifically part number DS-922542 under NSN 1650-00-790-9720, for the Department of Defense DLA Weapons Support Fluid Handling Division. The work must be performed at Hill AFB and requires strict adherence to the DLA Master List of Technical and Quality Requirements, utilizing CNC machining and specialized inspection equipment for Critical Application Items. Quality assurance is a primary requirement, with mandatory sampling conducted according to MIL-STD-1916 or ASQ H1331 standards. The project falls under NAICS code 336413, with a response deadline set for November 16, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

O-Ring Supply (NSN 5331-01-013-9653)This subcontract involves the manufacture and supply of 138 asbestos-free O-rings for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The items must be produced according to NSN 5331-01-013-9653 specifications and delivered FOB Origin to Tracy, California. The contractor is required to adhere to strict quality assurance and packaging standards, including MIL-STD-1916 or ASQ H1331 for quality, and MIL-STD-2073-1E and MIL-STD-129 for marking. All items must be sealed in MIL-DTL-117 waterproof, greaseproof, and opaque bags. Additionally, the supplier must maintain full compliance with the Buy American Act and the Berry Amendment.

All Other Plastics Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

Precision Casting and Forging for Fuel Pump ComponentsThis subcontract involves the precision casting and forging of raw structural components for fuel pump parts, specifically identified by NSN 2910003557669, to support prime contractors under DLA supply contracts. The selected provider will utilize industrial casting furnaces or forging presses to produce high-grade alloy blanks according to strict technical specifications, which are then delivered to the prime manufacturer for final machining. Managed by the Department of Defense under the DLA Weapons Support Fluid Handling Division, the project is categorized under NAICS code 332997 and requires full compliance with Buy American regulations. Performance will take place in Albany, and the solicitation period runs from November 5, 2026, through November 16, 2026.

Industrial Pattern Manufacturing

POSTED

about 18 hours ago

DEADLINE

Engine Fuel Pump Kit Fabrication and SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support Fluid Handling Division, involves the fabrication and supply of 18 complete parts kits for engine fuel pumps, identified by NSN 2910003557669. The scope of work requires precision fabrication of components and kit assembly utilizing specialized tooling, casting, and forging processes to support prime contractors on DLA supply contracts. The contractor must ensure strict adherence to MIL-STD-2073-1 Appendix D and MIL-STD-129 for all packaging and marking requirements. Additionally, a CMMC Level 2 self-assessment is mandatory for compliance. Performance of the contract will take place in Albany, Georgia, under NAICS code 333611.

Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 18 hours ago

DEADLINE

Cadmium Plating Services for Steel FittingsThis subcontract involves providing specialized cadmium plating services for the DLA Weapons Support Fluid Handling Division. The scope of work requires the surface preparation and application of cadmium plating on 128 steel street elbows to ensure they meet strict corrosion resistance specifications. All work must be performed in compliance with hazardous materials labeling standards per 29 CFR 1910.1200 and requires the necessary environmental permits for cadmium processing. The project is categorized under NAICS code 332813 and will be performed in New Cumberland. Interested parties must respond by November 16, 2026, to provide the finished cadmium-plated steel elbows as required by the Department of Defense.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 18 hours ago

DEADLINE

Manufacturer of Steel Street Elbows (NSN 4730-01-059-4126)This subcontract involves the manufacture and delivery of 128 steel street elbows for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The required components must feature a 90-degree flow angle, a 1-1/4 inch nominal pipe size, and female NPTF to male NPTF threads capable of withstanding a 3000 PSI pressure rating. The use of additive manufacturing is strictly prohibited for the production of these fittings. To be eligible, the provider must maintain US/Canada Joint Certification Program certification and ensure full compliance with ITAR and EAR regulations. The project is categorized under NAICS code 332710, with performance taking place in New Cumberland. Interested parties must respond by November 16, 2026.

POSTED

about 18 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract involves providing specialized military-grade packaging, marking, and palletization services for the Department of Defense, specifically under the DLA Weapons Support Fluid Handling Division. The scope of work requires the processing of 1,863 tube caps to be delivered via FOB Origin shipment. All activities must strictly adhere to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization, utilizing specific unit and intermediate container configurations. The project is categorized under NAICS code 333613 and will be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 16, 2026, for this specialized logistics requirement supporting prime contractors on DLA projects.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

Manufacturer of Steel Tube Caps (NSN 4730013592430)This subcontract involves the manufacture and delivery of 1,863 steel tube caps for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The contractor is responsible for fabricating the components using precision machining or forming equipment to ensure full compliance with technical standards SAE J1453-3 and SAE J1453-1-2012. The agreement mandates strict adherence to the Buy American Act and prohibits the use of Class I ozone depleting chemicals during production. Performance of the contract will take place in New Cumberland, Pennsylvania, under NAICS code 332710.

POSTED

about 18 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS