Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Precision Six Axis Hexapod System Fabrication

Active

Federal

Response Deadline09/18/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Energy → Slac National Accel Labor -Doe ContractorView Agency

NAICS

334519 - Other Measuring and Controlling Device ManufacturingView NAICS

Place of Performance

Menlo Park, CA, 94025, USA

Set-Aside

NONE

Documents

This scope was carved out of SLAC_367829_Precision_Six_Axis_Hexapod_Positioning_System.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Precision Six Axis Hexapod Positioning System

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 11

subcontract

Response DeadlineSep 18

Submission deadline

Response Deadline

09/18/2026, 09:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Energy → Slac National Accel Labor -Doe Contractor

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Energy → Slac National Accel Labor -Doe Contractor

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures and assembles a complete six-axis hexapod positioning system for prime contractors on SLAC National Accelerator Laboratory (DOE) projects. Performs design, precision machining, assembly, and calibration of a Stewart platform configuration to achieve six degrees of freedom. Utilizes high-stiffness actuators and precision linkages. Requires EAR/ITAR export control certifications. Delivers a fully assembled and tested system.

Similar Contracts

Same NAICS industry code

16--SENSOR,SMOKE DETECT, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QSB62

This sole source procurement by the Department of Defense Navsup Weapon Systems Support is for five smoke detector sensors under NSN 7R-1680-015890729-P8. The delivery terms are set as FOB Origin, and the acquisition is subject to the World Trade Organization Government Procurement Agreement and various Free Trade Agreements. Due to a lack of sufficient technical data for other vendors, this requirement is restricted to the current source. Prospective bidders must obtain Government Source Approval prior to the award. All proposals must include the specific documentation detailed in the NAVSUP WSS Source Approval Brochure to be considered for selection. The solicitation is managed by Cody P. Cameron, with a response deadline of October 27, 2026.

Navsup Weapon Systems Support

POSTED

about 10 hours ago

DEADLINE

in about 1 month

TENSIOMETER, V-BELT

Solicitation # SPE4A6-26-Q-1429

Solicitation SPE4A6-26-Q-1429, issued by the DLA Aviation ASC Commodities Division, is a request for quotations for the procurement of 24 V-Belt Tensioners (NSN 6635-00-921-6255), specifically identifying Gates Corporation part number 7401-0076. This is a firm fixed price acquisition with a delivery requirement of 46 days after order. The award will be based on best value, evaluating a trade-off between cost or price and non-price factors, including past performance—with a heavy emphasis on SPRS assessments—and the quoted delivery schedule. The contract mandates strict adherence to quality and technical requirements, including the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All items must be marked and labeled per MIL-STD-129, and palletization must follow RP001. Inspection and acceptance will occur at the destination. Additionally, the contractor must comply with specific safety and regulatory mandates, including the prohibition of intentionally added mercury, safeguarding covered defense information per DFARS 252.204-7012, and utilizing the Wide Area WorkFlow system for electronic invoicing and receiving reports.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

TRANSDUCER, MOTIONAL PI

Solicitation # SPE4A5-26-T-406J

Solicitation SPE4A5-26-T-406J, issued by DLA Aviation, is for the procurement of three motional pickup transducers, identified by NSN 6695010516478. This critical application item is classified as a commercial product under NAICS code 334519. The delivery schedule is set for 307 days after award, with a required delivery date of July 16, 2027. Shipping is established as FOB Origin and will be delivered to the DLA Distribution Depot at Hill AFB, Utah, under the First Destination Transportation program. The contract mandates strict quality and technical compliance, requiring sampling per MIL-STD-1916 or ASQ H1331 and packaging according to MIL-STD-2073-1E and MIL-STD-129. Inspection and acceptance will occur at the destination. Key regulatory requirements include a CMMC Level 2 Self-Assessment, adherence to the Buy American Act and Berry Amendment, and the use of the Wide Area WorkFlow system for electronic invoicing. The procurement also incorporates various FAR and DFARS clauses regarding cybersecurity, hazardous material labeling, and the prohibition of certain telecommunications equipment.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Integrated Radar EA System Developer

FA2385 USAF Afmc Afrl Pzl Afrl Rskd

POSTED

DEADLINE

in about 2 months

Supply of Liquid Quantity Transmitters (NSN 6680008699812)

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Art Robbins CryCam UV Imaging System Supply

Brookhaven National Labor -Doe Contractor

POSTED

DEADLINE

Mobile SLAM LiDAR Hardware Supply

CDC Office Of Acquisition Services

POSTED

DEADLINE

Supply of Electronic Scoring Target Heads (NC100)

W6QM Micc-Ft Drum

POSTED

DEADLINE

Intent to Award Sole/Single Source - USAFSAM/OE Alpha Beta Gas Counter

Solicitation # IASS-AFRL-RMZB-2026-0052

The Air Force Research Laboratory Enterprise Strategies and Initiatives Contracting Division intends to award a firm fixed-price sole source purchase order to Gamma Products, Inc. for one new automated Heavily Shielded Ultra-Low Background Gas Flow Alpha Beta Gas Counter, model G5020/100T. This procurement, identified by solicitation number IASS-AFRL-RMZB-2026-0052, is intended to replace an existing system at the end of its service life at Wright-Patterson Air Force Base in Ohio. The acquisition is justified as a single source because Gamma Products, Inc. is the only vendor capable of providing the specific model required to maintain standardization with existing training and standard operating procedures. The technical requirements specify a system featuring four inches of lead shielding in all directions, a 100-sample automated changer, and compatibility with standard P-10 counting gas. The system must include a computer running Windows 10 or 11 with native operating software capable of automatic HV plateau generation and basic control chart QA reporting. The scope of work also includes the trade-in, pickup, and removal of the older unit. While the government is proceeding with a sole source award under NAICS code 334519, authorized distributors or responsible sources may submit capability statements or exceptions to the intent to purchase by September 15, 2026.

FA2396 USAF Afmc Afrl Pzl Afrl Pzle

POSTED

DEADLINE

Mobile SLAM LiDAR Scanning Systems

Solicitation # 75D301-26-Q-79246

The Centers for Disease Control and Prevention, through the National Institute for Occupational Safety and Health Pittsburgh Mining Research Division, is seeking quotations for a Firm-Fixed-Price purchase order to acquire two complete handheld or backpack-mounted mobile SLAM LiDAR scanning systems. These systems will be utilized for 3D mapping and repeatable deformation measurements of roof, floor, and rib movement within underground coal mine environments. The procurement includes the hardware, all necessary software licenses for point-cloud data processing and export, protective transport cases, a minimum of 24 hours of virtual instructor-led training for three government personnel, and at least one year of warranty and support. Technical requirements specify that the systems must operate between 0°C and 40°C, function without continuous internet access, and meet strict accuracy metrics, including a static range noise of plus or minus 2 mm or better and indoor accuracy of plus or minus 10 mm or better. The award will be granted to the responsible quoter who is technically acceptable, meets the delivery requirement of 60 calendar days after award, and provides the lowest evaluated total price. This unrestricted solicitation under NAICS code 334519 requires submissions by September 17, 2026, and mandates compliance with Section 508 accessibility standards and specific AI risk management and disclosure protocols if artificial intelligence is utilized in the performance of the contract.

CDC Office Of Acquisition Services

POSTED

DEADLINE

Precision Six Axis Hexapod Positioning System

Solicitation # SLAC_367829_Precision_Six_Axis_Hexapod_Positioning_System

Slac National Accel Labor -Doe Contractor

POSTED

DEADLINE

Request for Information (RFI): Vehicle Integrated Point Enhanced RADIAC (VIPER)

Solicitation # W911SR-26-RFI-VIPER

POSTED

DEADLINE

More opportunities from Department Of Energy → Slac National Accel Labor -Doe Contractor

Same awarding agency

Precision Component Machining

POSTED

DEADLINE

Hexapod Controller and Software Development

Computer Systems Design Services

POSTED

DEADLINE

Precision Linear Actuator Supply

Motor and Generator Manufacturing

POSTED

DEADLINE

On-Site Installation and Commissioning of Maskless AlignerThis subcontract involves the physical installation and calibration of a Tabletop Maskless Aligner System at the SLAC National Accelerator Laboratory in Menlo Park, California. The selected provider is responsible for positioning the equipment and integrating the systems into the laboratory environment to deliver a fully operational and calibrated system for prime contractors on Department of Energy projects. Compliance is a critical component of this engagement, requiring strict adherence to Cal/OSHA Title 8 and SLAC ES&H Manual Chapter 42. Additionally, the contractor must provide an 851-compliant Injury and Illness Prevention Plan. The solicitation was posted on September 2, 2026, with a response deadline of September 17, 2026, under NAICS code 811210.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Supply and Delivery of Tabletop Maskless Aligner SystemThis subcontract involves the manufacture and delivery of a fully functional Tabletop Maskless Aligner System for prime contractors supporting Department of Energy projects at the SLAC National Accelerator Laboratory in Menlo Park, California. The selected provider is responsible for sourcing high-precision lithography equipment, submitting necessary technical data for approval, and ensuring all systems are packaged according to specific SLAC instructions. The contract emphasizes strict adherence to export controls and counterfeit part standards to ensure equipment integrity. Under NAICS code 334413, the project requires the delivery of a complete system that meets all technical specifications and regulatory requirements for use within the national accelerator laboratory environment.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

Tabletop Maskless Aligner System

Solicitation # SLAC_368016_TabletopMasklessAlignerSystem

The SLAC National Accelerator Laboratory, operated by Stanford University for the Department of Energy, is soliciting quotes for one tabletop maskless aligner system. Source selection will be based on the Lowest Price and Technically Acceptable Method, with a bid closing date of September 16, 2026. The system must meet specific technical requirements, including a tabletop form factor with vibration isolation, dual exposure capabilities, a minimum feature size of 0.6 microns, and an overlay alignment accuracy of 0.6 microns or less. The equipment must support standard CAD formats, accommodate substrates from 5mm to 6 inches, and be delivered within six months, including installation and training. The resulting purchase order will be issued on a fixed-price basis with NET-30 payment terms and FOB Destination Prepaid and Add freight terms. Bidders must provide a price and lead-time quotation and are encouraged to include any academic or government discounts. Required documentation for submission includes a Buy American Act Certification for items over 15,000 dollars, a Representations and Certifications Rider, a Subcontractor IIPP form, and a Certificate of Insurance for onsite services. All subcontractors must be registered in the System for Award Management and must adhere to the SLAC General Terms and Conditions, including the August 2023 Fixed Price Commercial Supplies-Services terms and the August 2026 Supplemental Rider.

Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

BL18 In-Vacuum Undulator

Solicitation # 367893(RE)

The SLAC National Accelerator Laboratory, operated by Stanford University for the Department of Energy, is seeking proposals for the procurement of a BL18 In-Vacuum Undulator. This requirement specifically mandates a U.S. domestic end item source. While the laboratory operates as a management and operating contractor and is not directly subject to the Federal Acquisition Regulations, certain federal laws and regulations may still apply to the purchasing process. Interested vendors must submit their full proposals to Ryan Enos by 5pm PDT on October 16, 2026, with any requests for clarification submitted by September 25, 2026. All submissions must adhere to the RFP preparation requirements outlined in solicitation 367893(RE) and include all documentation specified in the cover letter. The performance of this contract will take place in Menlo Park, California.

All Other Industrial Machinery Manufacturing

POSTED

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS