Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Tool Manufacturing – Water Inlet Fitting Wrench

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture of three precision wrenches to meet military National Stock Number specifications NSN 4921-00-928-4081, ensuring exact adherence to military performance and dimensional standards. Each wrench must be packaged and marked in full compliance with MIL-STD-129, including all required labeling, barcoding, and documentation for military logistics systems. Delivery is specified as FOB Destination to Keyport, Washington, with the final destination being a Department of Defense facility in that location. The project falls under NAICS code 332211, classifying it as a precision tool manufacturing subcontract, and is issued by the Fluid Handling Division of the Department of Defense. Responses are due by August 3, 2026, with the solicitation posted on July 22, 2026, indicating a timeline for bid submission and evaluation.

General Info

Manufacture three precision wrenches to NSN 4921-00-928-4081, comply with MIL-STD-129, deliver FOB Destination Keyport, WA by August 3, 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332211 - Cutlery and Flatware (except Precious) ManufacturingView NAICS

Place of Performance

KEYPORT, WA, 98345-7610, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of three precision wrenches to military NSN specifications (NSN 4921-00-928-4081), including MIL-STD-129 compliant packaging, marking, and FOB Destination delivery.

Similar Contracts

Same NAICS industry code

Other Specialized Tooling Components (Items 9–15)The contract pertains to the supply of seven additional unspecified industrial tooling components essential for supporting the operation of a rigid threading machine, designated as Items 9 through 15 under the title Other Specialized Tooling Components. This subcontract is issued under NAICS code 332211, which pertains to metal forging and stamping, indicating the specialized nature of the tooling required. The procurement is managed by the 246-NETWORK Contracting Office 6 of the Department of Veterans Affairs, with performance expected to occur in Salem, Virginia, at the ZIP code 24153. Although the solicitation number is not provided, the opportunity was posted on July 24, 2026, and responses must be submitted by July 30, 2026, at 3:00 PM Eastern Time. No set-aside designation or agency-specific restrictions are indicated, but the requirement is confined to subcontracting arrangements with no specific point of contact listed for outreach.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Bevelling Kits SupplyThe contract is for the supply of bevelling kits designed to chamfer pipe and component edges prior to threading, ensuring compatibility with industrial equipment used in maintenance and fabrication operations. The items are critical for preparatory work in high-precision piping systems and must meet established industrial standards for durability, precision, and tool integration. The solicitation is classified as a subcontract under NAICS code 332211, which corresponds to pipe fitting manufacturing, indicating the supplier is expected to have expertise in producing components for mechanical and plumbing applications. The contract was posted on July 24, 2026, with a response deadline of July 30, 2026, at 3:00 PM, limiting the window for submissions to just six days. Performance is designated for Salem with a zip code of 24153, implying delivery or on-site use is targeted at a specific location within that region. The contracting office is the 246-NETWORK Contracting Office 6 under the Department of Veterans Affairs, suggesting the end-use is for federal facilities under VA management, likely related to infrastructure upkeep or construction projects servicing veteran healthcare sites. No set-aside provisions are specified, meaning competition is open to all qualified vendors without preference for small, minority-owned, or other specialized business categories.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Grooving Dies SupplyThe contract is for the supply of grooving dies used to create precise grooves on threaded components essential for industrial threading operations. These tools are critical for ensuring accuracy and consistency in manufacturing processes within the industrial sector. The solicitation, issued under NAICS code 332211, is classified as a subcontract and was posted on July 24, 2026, with a response deadline of July 30, 2026, at 3:00 PM. Performance of the contract is required at a location in Salem with a zip code of 24153. The contracting office responsible is the 246-NETWORK Contracting Office 6 operating under the Department of Veterans Affairs, though no specific point of contact or set-aside provisions are detailed. All submissions must be completed by the stated deadline to be considered for award.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Reams (Reamers) SupplyThe contract involves the supply of precision reamers used for hole finishing in metalworking applications, specifically as part of a threading machine tooling package. These reamers are critical components for achieving accurate and consistent hole dimensions in industrial manufacturing environments, ensuring compatibility and performance within automated machining systems. The solicitation is issued as a subcontract under NAICS code 332211, which classifies the industry as Metal Cutting Tool Manufacturing, indicating the specialized nature of the required tooling. The opportunity was posted on July 24, 2026, with a response deadline of July 30, 2026, at 3:00 PM. Performance is required at a location in Salem with a zip code of 24153, and the contracting office is the 246-NETWORK Contracting Office 6 (36C246) under the Department of Veterans Affairs. No set-aside type is specified, meaning the contract is open to all eligible subcontractors without preference for small businesses or other categories. Interested parties must submit proposals through the official SAM.gov portal prior to the deadline to be considered.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Chucks SupplyThe contract involves the supply of machine chucks designed for secure workpiece holding during threading operations, ensuring compatibility with industrial machinery used in precision manufacturing environments. These chucks must meet strict functional and durability standards to support consistent, high-quality threading processes in demanding industrial settings. The solicitation is issued under a subcontract type with a NAICS code of 332211, indicating the procurement is tied to machine shop and related manufacturing activities. The opportunity is managed by the Department of Veterans Affairs through the 246-NETWORK Contracting Office 6, with performance required at a location in Salem, Virginia, ZIP code 24153. Interested parties must submit responses by the deadline of July 30, 2026, at 3:00 PM Eastern Time, with the solicitation posted on July 24, 2026. All proposals must align with technical specifications for chucks that integrate seamlessly with existing industrial equipment and maintain reliability under continuous operational loads.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Die Heads SupplyThe contract pertains to the supply of precision die heads intended for use in threading operations, as one component within a broader 15-item industrial tooling package. It is issued as a subcontract under the NAICS code 332211, which classifies it within the screw, nut, and bolt manufacturing sector, indicating the technical specificity and industrial application of the required components. The solicitation is managed by the 246-NETWORK Contracting Office 6 under the Department of Veterans Affairs, with performance required at a location in Salem with a zip code of 24153. While no set-aside designation is specified, the posting date of July 24, 2026, and the response deadline of July 30, 2026, indicate a short procurement window, suggesting urgency or alignment with an upcoming production cycle. Interested parties must submit proposals through the official SAM.gov portal before the deadline to be considered for award.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Manufacture of Sensitive Electrical Switch (NSN: 5930-01-128-1420)The contract requires the full manufacturing, testing, and delivery of a sensitive electrical switch identified by NSN 5930-01-128-1420, adhering strictly to military specifications and quality standards including MIL-STD-1916 and MIL-STD-129. The work encompasses end-to-end production with full traceability throughout the supply chain, rigorous quality inspection protocols, and compliance with all defense-related documentation and packaging requirements. The switch is critical to military systems and must meet exacting performance and reliability benchmarks under controlled environmental and operational conditions. This is a small business set-aside subcontract under the SBA program, exclusively available to small businesses as defined by the NAICS code 332211, which covers electrical manufacturing. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026. Performance is required at the designated location in Jacksonville, Florida, with the Department of Defense’s Electrical Devices Division as the overseeing agency. All deliverables must be fully compliant with federal defense procurement regulations, and the contractor is expected to maintain strict adherence to quality assurance, labeling, and shipping standards specified by the military.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Electric Solder Tip Manufacturing and SupplyThe contract seeks the manufacture and delivery of 28 electric solder tips to meet stringent technical, packaging, labeling, and hazardous materials reporting standards set by the Defense Logistics Agency. All units must comply with specified military and regulatory requirements to ensure suitability for defense applications, with performance and quality expectations aligned to federal procurement benchmarks. The items are destined for the DLA New Cumberland Facility, with the place of performance established in New Cumberland, Pennsylvania, 17070-5002. The solicitation is issued as a subcontract under NAICS code 332211, which classifies the work within the solder and soldering product manufacturing sector. The posting date is July 23, 2026, and responses must be submitted by August 3, 2026. The contract is managed by the Department of Defense through its DDSP New Cumberland Facility, and while no specific set-aside or point of contact is indicated, interested parties are directed to the DIBBS platform for additional details and submission procedures.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply and Delivery of Rotary Files (NSN: 3455010511387)The contract requires the procurement and delivery of 1,828 units of rotary files that comply with the National Stock Number 3455010511387, ensuring full adherence to federal packaging and labeling standards. All items must be shipped FOB Origin to DLA Distribution San Joaquin in Tracy, California, with the final destination zip code 95304-5000. The solicitation is classified as a subcontract under NAICS code 332211, indicating it falls within the manufacturing of general purpose machinery and equipment. The offer deadline is August 3, 2026, with the opportunity posted on July 23, 2026, and the procuring agency is the Department of Defense through DLA Distribution San Joaquin, which manages logistics for federal defense supply chains.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Rotary File Supply and PackagingThe contract requires the procurement, packaging, labeling, and shipment of rotary files designed as industrial cutting tools, with strict adherence to hazardous materials regulations and military packaging standards. All items must be managed in compliance with the Department of Defense’s safety and logistical requirements, ensuring safe handling, transport, and storage throughout the supply chain. The packaging and labeling must meet exacting military specifications to guarantee integrity and traceability during transit and upon delivery. The solicitation is issued under NAICS code 332211, indicating a focus on metal cutting tool manufacturing, and is classified as a subcontract opportunity. Performance is designated for New Cumberland, Pennsylvania, with a zip code of 17070-5002. The posting date is July 23, 2026, and responses are due by August 3, 2026. The contracting entity is the DDSP New Cumberland Facility under the Department of Defense, and bidders must be prepared to fulfill all technical and regulatory obligations specified for defense-related industrial tooling.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Special-Purpose Combination Torque WrenchThe contract requires the manufacture or supply of nine units of a special-purpose combination torque wrench identified by the National Stock Number 5120016962214, with all units needing to fully comply with applicable military specifications. Delivery is to be made FOB Origin to the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating that the buyer assumes responsibility for transportation costs and risks once the items leave the supplier’s facility. The contract is structured as a subcontract under the NAICS code 332211, which corresponds to the manufacture of industrial tools and implements, and is issued by the ASC SUPPLIER OPER OEM DIVISION of the Department of Defense. The solicitation was posted on July 22, 2026, with a firm response deadline of July 30, 2026, allowing potential suppliers a limited window to submit proposals. The procurement is part of a broader defense logistics initiative, targeting specialized equipment critical to military operations, and all delivered items must meet exacting performance and quality standards to ensure operational readiness.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Transportable Fuel Storage and Dispensing System SupplyThe contract pertains to the supply of a transportable fuel storage and dispensing system featuring a double-wall ISO container with a secure pump bay, designed for safe and efficient handling of MOGAS fuels. The system must include an integrated retail dispensing pump and a lining compliant with MOGAS compatibility standards, ensuring durability and resistance to fuel degradation. All components must adhere strictly to AS1692, UL142, ULC S601, UL2085, and CSC safety and construction regulations, reflecting a high standard of engineering and operational reliability for use in demanding environments. The system is intended for mobility and compliance with international transport and containment protocols. The contract is classified as a subcontract under the NAICS code 332211 and is issued by the Defense Logistics Agency under the Department of Defense. It was posted on July 21, 2026, and its performance location is not specified, indicating potential deployment flexibility across multiple sites. The award reference number is SPE60526P1088, and the procurement is managed through the DIBBS system, suggesting it supports military or federal logistics operations requiring secure, standardized, and compliant fuel distribution infrastructure. No set-aside provisions are indicated, implying open competition among qualified suppliers.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

Packaging and Preservation Services per MIL-STD-2073-1EThe contract requires the provision of military-compliant packaging and preservation services in strict accordance with MIL-STD-2073-1E, covering all aspects of cleaning, wrapping, cushioning, and the selection of appropriate containers to ensure the integrity and longevity of defense-related items during storage and transit. The work must meet stringent military standards for environmental protection, handling, and durability, ensuring components remain functional and protected under extreme conditions. All processes must be executed with precision and documentation to validate compliance with the specified technical directives. This is a subcontract opportunity issued by the Fluid Handling Division of the Department of Defense, with a required performance location in New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 24, 2026, and bids must be submitted by August 3, 2026. The NAICS code 488999 categorizes the service under Other Support Activities for Transportation, indicating it involves logistical and handling support rather than direct production. Interested parties must ensure they can fulfill the full scope of military packaging requirements as defined by the standard, with no allowances for deviation from the prescribed procedures or materials.

All Other Support Activities for Transportation

POSTED

DEADLINE

Supply Chain Traceability Documentation ServicesThe contract titled Supply Chain Traceability Documentation Services requires the development and ongoing maintenance of detailed supply chain traceability records in strict alignment with DLAD Procurement Note C03 and DLA Directive C03 to support audit readiness and regulatory compliance. The work is focused on ensuring accurate, complete, and accessible documentation of component origins, transformation pathways, and transaction histories throughout the supply chain, specifically for the Department of Defense’s Fluid Handling Division. Performance is expected to be carried out at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. This is a subcontract opportunity classified under NAICS code 541610, indicating it pertains to management consulting services, and the solicitation was posted on July 24, 2026, with a response deadline of August 3, 2026. All documentation must be structured to meet federal audit standards and support traceability requirements critical to defense logistics integrity.

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires the preparation and submission of hazard warning labels and Material Safety Data Sheets (MSDS) that fully comply with OSHA Hazard Communication standards and applicable military regulations. The work is focused on ensuring accurate, standardized documentation for hazardous materials used within the Department of Defense’s Fluid Handling Division, with all deliverables meeting federal safety and labeling requirements. The performance location is specified as New Cumberland, PA, 17070-5002, indicating the need for localized support and potential on-site coordination with defense logistics operations. This is a subcontract opportunity under NAICS code 541690, classified as a professional, scientific, and technical service, and is open for responses until August 3, 2026. The solicitation was posted on July 24, 2026, and interested parties must align their technical proposals with both civilian and military compliance frameworks. While no set-aside designation is specified, bidders are expected to demonstrate proven expertise in hazardous materials documentation, experience with DoD procurement protocols, and the capability to maintain rigorous quality control over label and SDS accuracy to support operational safety across defense supply chains.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

First Article Testing (FAT) for Defense Item (NSN 4720-01-581-9015)First Article Testing is required for the defense item identified by NSN 4720-01-581-9015 to ensure full compliance with specified technical requirements before any full-scale production begins. The testing must be conducted thoroughly and documented in formal reports submitted to the Defense Logistics Agency to validate that all design, material, and manufacturing standards are met. This subcontract task is critical to confirming product integrity and readiness for deployment within the Department of Defense supply chain. The solicitation is open for responses until August 3, 2026, with performance expected to be completed at the designated location in New Cumberland, Pennsylvania, zip code 17070-5002. The North American Industry Classification System code of 541380 indicates this work falls under scientific and technical consulting services, reflecting the engineering and quality assurance expertise needed to execute the testing. The contracting office is part of the Fluid Handling Division under the Department of Defense, and all deliverables must align with federal defense procurement protocols while meeting stringent quality benchmarks.

Testing Laboratories and Services

POSTED

DEADLINE

Supply of Defense Item with Radioactive Components (NSN 4720-01-581-9015)The contract pertains to the procurement and delivery of a defense item identified by NSN 4720-01-581-9015, which contains radioactive materials and must adhere to stringent regulatory and logistical standards. Compliance with 10 CFR is mandatory, ensuring all safety, handling, and transportation protocols for radioactive substances are strictly observed. The item must be marked in accordance with MIL-STD-129 and packaged under MIL-STD-2073-1E specifications to guarantee durability, protection, and proper identification throughout the supply chain. Full traceability of all components and materials is required from manufacture to final delivery, ensuring accountability and regulatory compliance at every stage. This is a subcontract opportunity issued by the Department of Defense’s Fluid Handling Division, with performance located at New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 24, 2026, and responses are due by August 3, 2026. The NAICS code 332999 classifies the work under Other Fabricated Metal Product Manufacturing, reflecting the specialized nature of the item’s fabrication. Interested parties must ensure their capabilities meet all technical, safety, and documentation requirements prior to submission, as failure to comply with any of the specified standards could result in rejection or non-performance. Access to full solicitation details is available via the provided DIBBS link.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

BOLT, FLUID PASSAGEThe contract solicitation SPE7M4-26-T-256H calls for 14 units of BOLT, FLUID PASSAGE with NSN 4730-01-460-5325, a restricted-source item manufactured exclusively to OEM drawings, with only prequalified sources eligible to respond. Delivery is required within five days of order placement to Tinker AFB, Oklahoma, with FOB Origin terms and inspection and acceptance also performed at origin. The item must comply with stringent marking requirements per MIL-STD-130, including NSN, part number, manufacturer’s CAGE code, date of manufacture, and the “FOR MILITARY USE ONLY” designation, while packaging and labeling adhere to ASTM D3951, RP001, and MIL-STD-129 with standardized barcoding for logistics automation. Safety and environmental compliance is mandated through DFARS clauses prohibiting hexavalent chromium, hazardous material storage, and toxic substance disposal, alongside mandatory submission of Safety Data Sheets aligned with OSHA HazCom standards. Cybersecurity requirements are extensive, including implementation of NIST SP 800-171 controls via clause 252.240-7997, safeguarding covered defense information per 252.204-7012, and reporting cyber incidents immediately; the contractor must be CMMC Level 2 certified. Prohibitions extend to acquisition of telecommunications equipment from designated Chinese military companies and use of mandatory arbitration agreements. The contract mandates electronic invoicing via WAWF and requires offerors to provide their UEI and CAGE code, with full socioeconomic and small business status representations submitted. All submissions are strictly electronic through DIBBS by the July 29, 2026 deadline, and while pricing data is unspecified, historical unit costs suggest a variable range. The contract type remains undetermined pending award, but it includes standard FAR and DFARS clauses on payment acceleration, subcontracting, changes, defaults, and contractor liability, with administrative details like DoDAAC and point of contact to be finalized upon award.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

VALVE, REEDThe contract pertains to the procurement of 81 units of a reed valve, identified by NSN 4310014912062 and part number ML12445466G1, with a delivery requirement of 362 days after order placement, targeting an original delivery date of August 20, 2027, and a need ship date of July 22, 2027. Delivery is FOB origin, and acceptance occurs at the destination facility located at DLA Distribution Puget Sound in Bremerton, Washington. Packaging must fully comply with MIL-STD-2073-1E, including clean and dry preservation without additional materials, cushioning using jute, medium thickness dunnage, and unit containers with open packaging indicators, while intermediate containers and palletization must adhere to DLA’s RP001 packaging requirements. Marking must follow MIL-STD-129 with no special markings required, and barcoding compliance is mandatory. The contract prohibits intentional introduction of mercury or mercury-containing compounds into the supplied hardware, except for explicitly exempted items such as functional batteries, fluorescent lamps, sensors, weapon systems, and specified chemical reagents, with portable mercury-containing devices requiring a secondary containment boundary in accordance with NAVSEA 5100-003D. The contract invokes multiple FAR and DFARS clauses, including those governing inspection at destination, changes, subcontracting, small business representation, cybersecurity safeguards, and the safeguarding of controlled defense information under NIST SP 800-171, with mandatory cyber incident reporting. Invoicing is exclusively through WAWF, and all contractors must maintain active SAM registration. The solicitation is set aside for small businesses, with evaluation based likely on an LPTA basis, requiring strict compliance with socioeconomic certifications, UEI and CAGE codes, affirmative disclosures for covered telecommunications equipment, and the Buy American and Berry Amendment requirements. The procurement is issued under a simplified acquisition procedure, with quotations submitted electronically via DIBBS, and no option periods or contract extensions are included.

Air and Gas Compressor Manufacturing

POSTED

DEADLINE

WAND, SPRAY GUNThe contract solicitation SPE7M4-26-T-256F seeks the procurement of one unit of a WAND, SPRAY GUN, identified by NSN 4940011118154 and part number 40152 from TENNANT COMPANY. Delivery is required within 20 days after offer acceptance, with FOB Origin terms and inspection and acceptance to occur at the destination point. The item must be packaged in strict compliance with ASTM D3951 and all applicable DLA Master List of Technical and Quality Requirements, which take precedence over any other standard. Packaging and labeling must adhere to MIL-STD-129, including correct unit of issue, quantity per unit pack, transportation control number (TCN W90T1W40740101), and proper marking with no government identification present, per RQ011 requirements. Palletization follows RP001: DLA Packaging Requirements for Procurement. The consignee is located at 4045 Weld County Road 22, Longmont, CO 80504-9404, and the item must be shipped via the fastest traceable means, excluding parcel post. The contract incorporates multiple Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses mandating compliance with employment equality, combating human trafficking, employment eligibility verification, sustainable products, hazardous material identification, cybersecurity, export controls, and prohibitions on certain telecommunications equipment and toxic substances. Offerors must provide their Unique Entity Identifier and CAGE code, represent their size and socioeconomic status, and disclose involvement with covered defense telecommunications equipment or joint ventures. All proposals must be submitted electronically through the DLA Internet Bid Board System by July 24, 2026, and must include complete representations and certifications. Invoicing must be processed exclusively through Wide Area WorkFlow, and any changes to the contract are governed by FAR 52.243-1. Although unit price and total contract value are not provided, the delivery quantity is fixed at one unit with zero variance allowance. The contracting officer is Rory O’Reilly of the DLA Fluid Handling Division, and all technical and administrative details will be finalized in the resulting award.

Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

HOSE, NONMETALLICThe contract involves the procurement of nonmetallic hose identified by NSN 4720015963863 under a solicitation issued by the Department of Defense’s Fluid Handling Division, with the solicitation number SPE7M4-26-U-0399. This is a Total Small Business Set-Aside under FAR 19.5, targeting small businesses and requiring offerors to certify their size status and socioeconomic classifications such as SDB, WOSB, EDWOSB, SDVOSB, or HUBZone, with joint ventures required to disclose the UEI and CAGE Code of each participant. The contract is structured as an indefinite-delivery contract with a guaranteed minimum of 11 units and a maximum value of $350,000, though the quoted quantity of 74 units is labeled as an estimate and may not be ordered. Delivery is required FOB origin within 52 days after order placement, with acceptance occurring at the destination point, and no variance in quantity is permitted. All supplies must be packaged, palletized, and marked in strict compliance with DLA Master List of Technical and Quality Requirements, superseding ASTM D3951, and conforming to MIL-STD-129 for labeling, barcoding, and identification, with palletization following RP001. Hazardous materials must be labeled and documented per OSHA’s Hazard Communication Standard and DFARS 252.223-7001 and 7003, including submission of Safety Data Sheets before award and ongoing updates if composition changes. The contractor must also comply with multiple Federal Acquisition Regulation clauses regarding equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, safeguarding government information, cybersecurity reporting, prohibition of toxic substances like hexavalent chromium, and restrictions on acquisition of equipment from certain Chinese military companies. Invoicing must be submitted through Wide Area WorkFlow (WAWF), and all government identification must be removed from non-accepted items. The contract is electronically managed via DIBBS, and contact for inquiries is Colin Brown at colin.brown@dla.mil.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

HOSE, NONMETALLICThe contract specifies the procurement of a nonmetallic hose with a unit of issue of one foot, identified by NSN 4720-01-210-2726 and part number 2794HX, supplied by OSHKOSH DEFENSE LLC and CLARK EQUIPMENT CO. The requirement calls for delivery of exactly one foot under CLIN 0001 with a delivery window of ten days FOB origin, no negative quantity variance allowed, and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and strict DLA standards including MIL-STD-129 marking and labeling, with palletization aligned to RP001 DLA Packaging Requirements. All technical and quality specifications referenced via R or I numbers from the DLA Master List take precedence over any other standard. The hose must be shipped in bulk, with no parcel post permitted, via the fastest traceable means to the designated warehouse at MCLB Yermo Annex in Barstow, California, under shipment RDD 555 and project code TP 2. The original required delivery date is April 3, 2025, and the contract is issued under solicitation SPE7M4-26-T-257D with compliance governed by the DLA Master List revision effective on the solicitation issue date.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

LATERAL, PIPEThe contract specifies the procurement of two cast bronze lateral pipe fittings with a 45-degree branch, each having a nominal pipe size of 2-1/2 inches and an outside diameter of 2.875 inches, with all ends designed as sockets. Brazing rings must be separately packaged and physically attached to each parent component, not grouped collectively in a single container. The product must comply with the Supplemental Quality Assurance Provision SQAP 4730-0003 and adhere to DLA packaging requirements as outlined in RP001. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation or award date depending on acquisition size. The supplier is required to provide one Certificate of Quality Compliance (COQC) per manufacturing lot, prepared in strict accordance with SQAP, and must have it ready for Government review at the point of inspection. An electronic copy of each COQC must be uploaded to the iRAPT system via the Receiving Report’s Attachment tab for Government records retention. The item is identified by NSN 4730-00-542-5293 and is subject to configuration change management, variance requests, and removal of government identification from non-accepted supplies as specified in RQ011, RQ002, and RQ001. Delivery is due in 254 days from order, and the contract was issued under solicitation SPE7M3-26-T-7462 by the Department of Defense’s Fluid Handling Division, with William Cain as the primary point of contact.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

COUPLING ASSEMBLY, QUICThe contract is for the procurement of 18 units of a quick disconnect coupling assembly with NSN 4730003694603 and part number FF5186-40-40, supplied by Hydrasearch Company LLC, Danfoss Power Solutions II LLC, and Global Incorporated. The delivery is required within 164 days of contract award with FOB origin terms, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, materials, and unit container codes, with no special marking required. All items must adhere to DLA packaging requirements and be delivered to the specified DLA Distribution San Diego address. Strict prohibitions are in place against the intentional use of mercury or mercury-containing compounds unless exempted for specific functional applications such as batteries, fluorescent lamps, or instruments, with additional containment requirements for portable mercury devices. Class I ozone-depleting chemicals are completely banned, and substitutions must be pre-approved unless explicitly permitted by specifications. The unit of issue is each, with a total contract value of $324.00 based on a unit price of $18.00, and the original delivery date is set for May 10, 2027, with a need ship date of January 5, 2027. The solicitation number is SPE7M3-26-T-7461, issued under DoD procurement procedures, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE