Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Tube Fitting Manufacturing – TEE, TUBE (NSN 4730-01-077-0304)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the manufacture and one-time delivery of a precision metal TEE, TUBE fitting identified by NSN 4730-01-077-0304, produced to meet federal supply and Defense Logistics Agency standards. The item is a specialized component requiring exacting manufacturing tolerances and compliance with military specification requirements, ensuring compatibility and reliability in defense systems. The work is classified as a subcontract under NAICS code 332919, indicating it falls within other fabricated metal product manufacturing, and is directed by the Department of Defense through the Defense Logistics Agency. Delivery is scheduled for a single shipment with no indication of recurring orders or multiple award options. The contract was posted on July 17, 2026, with performance and delivery locations not specified, implying flexibility in manufacturing location as long as all compliance and delivery standards are met. The contract is linked to the DIBBS system under award number SPE7M326P0154, and all production must align with the regulatory and quality protocols enforced by DLA to ensure wartime readiness and logistical interoperability across defense platforms.

General Info

Manufacture and one-time delivery of precision metal TEE fitting to DLA military standards, no recurring orders.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and delivery of a precision metal TEE, TUBE fitting under NSN 4730-01-077-0304, compliant with federal supply and DLA standards for one-time delivery.

Similar Contracts

Same NAICS industry code

Supply of Check Valve (NSN 4820014793300)The contract pertains to the procurement and delivery of a single check valve identified by NSN 4820014793300 and part number CC0009925, manufactured by CAGE code 1NWY2, ensuring full compliance with all applicable federal and defense specifications. The item must be supplied with complete traceability documentation and accompanying delivery records to meet stringent military supply chain requirements. This subcontract under the Department of Defense, administered by the Defense Logistics Agency, falls under NAICS code 332919 and is scheduled for performance with no specified delivery location. The contract was posted on July 17, 2026, and is linked to the award reference SPE7LX26FB603 under the broader contract SPE7LX21D0081, with no set-aside provisions indicated.

Defense Logistics Agency

POSTED

DEADLINE

Gate Valve (NSN 4810014447129) SupplyThe contract involves the supply and delivery of one commercial off-the-shelf gate valve identified by NSN 4810014447129, with no requirement for installation, integration, or additional services. This is a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 332919 for other miscellaneous fabricated metal product manufacturing. The solicitation was posted on July 17, 2026, and the place of performance and office address details are not specified. The contract is listed on the DIBBS platform with the referenced award and delivery identifiers, but no point of contact or set-aside information is provided. The scope is limited strictly to the procurement and delivery of the specified valve as a ready-to-use component.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Safety Relief Valve (NSN 4820007083805)The contract requires the procurement and delivery of a single Safety Relief Valve with part number 6F7702 and national stock number 4820007083805 for installation aboard the USS New Orleans LPD 18. The item must fully comply with applicable military specifications to ensure operational safety and reliability in naval environments. Delivery must adhere to the Defense Priorities and Allocations System (DPAS) guidelines, which prioritize national defense-related contracts and require timely fulfillment under federal priorities regulations. The contract is classified as a subcontract under NAICS code 332919, indicating the manufacturing of other fabricated metal product manufacturing, and is administered by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 17, 2026, and the performance location is tied to the USS New Orleans, though specific geographic details are not provided. The contract is linked to an active award record through the DIBBS system for tracking and accountability purposes.

Defense Logistics Agency

POSTED

DEADLINE

Precision Fabrication of TEE, TUBE TO BOSS (NSN 4730-00-555-1862)The contract pertains to the precise manufacture and delivery of a standardized fluid system component known as the TEE, TUBE TO BOSS, identified by the National Stock Number 4730-00-555-1862, intended for integration into military hydraulic and pneumatic systems. Production must strictly adhere to applicable federal specifications to ensure performance, reliability, and interoperability across defense platforms, with all components originating from certified manufacturing processes that meet stringent military quality and durability standards. This is a subcontract under the purview of the Defense Logistics Agency, a component of the Department of Defense, and is classified under NAICS code 332919 for other fabricated metal product manufacturing. The award was posted on July 17, 2026, and the place of performance and specific delivery locations are not detailed in the provided information, but the component must be delivered to support operational military systems within the established timelines and compliance frameworks. The contract is administered through the DIBBS portal under the reference SPE7M425P5638, and all parties are expected to uphold full regulatory and logistical accountability for the delivered goods.

Defense Logistics Agency

POSTED

DEADLINE

COLLAR, RECEPTION COThe contract pertains to the procurement of a single slider block, split, for a fuel line with NSN 1680-00-064-0295, with a delivery requirement of 219 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the applicable revision is determined by the solicitation issue date or award date depending on the acquisition size. Inspections and acceptance must occur at the supplier’s origin, and any non-accepted supplies must have government identification removed prior to return. Item Unique Identification is not required as specified by the service customer, with DFARS 252.211-7003(c)(1)(i) governing this exemption. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and formal approval from DLA. The solicitation number is SPE4A7-26-Q-0844, with a response deadline of July 29, 2026, and the contracting office is the Department of Defense’s ASC Supplier Oper AE and AF Division, with Brian Kurtz as the primary point of contact.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

SPRMM1-26-Q-GB18-GATE, VALVE, 10 IN.The solicitation SPRMM1-26-Q-GB18 seeks three units of a 10-inch gate valve with NSN 4820-01-700-0383, manufactured to specifications outlined in design documentation 75774, P4-32689-G01, and 9439-870, with a TDP version of 001 and a shelf life of 0-00. The item must be physically identified per MIL-STD-130 Rev N and comply with all applicable government quality and inspection standards, including FAR 52.246-2 and 52.246-3, with inspections and acceptance conducted at the contractor’s or subcontractor’s plant. The contractor is required to implement NIST SP 800-171 security controls and adhere to DFARS 252.204-7012 for safeguarding covered defense information and reporting cyber incidents, with deviation 2024-00013, Revision 1, in effect. Packaging and marking must follow MIL-STD-2073-1 for overseas and stock shipments, ASTM D3951-18 for CONUS immediate-use shipments, and MIL-STD-129 for all labeling, including mandatory inclusion of PIID, CLIN, and SubCLIN for spares, with DLR labeling required for items with specific Cognizance Codes. Palletization must conform to MIL-STD-147 and ANSI MH1-2016, and all wood packaging must comply with ISPM 15 and bear the ALSC mark. Hazardous materials must be labeled under 29 CFR 1910.1200 and packaged per 49 CFR Performance Oriented Packaging standards. Delivery is FOB destination to the DDSP New Cumberland Facility in New Cumberland, PA, with no specified delivery date other than ASAP, and electronic invoicing via WAWF is required under DFARS 252.232-7003. The solicitation is automated, uses NAICS code 332919 with a small business size standard of 750 employees, and requires SAM registration and certification compliance including representations on foreign ownership, trade agreements, Buy American, cybersecurity, and whistleblower rights. Offers must include OEM details if not the

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

SPRMM1-26-Q-GB23-GATE, VALVE, 10 IN.The solicitation SPRMM1-26-Q-GB23 seeks three units of a 10-inch gate valve identified by NSN 7HH 4820-01-700-0374, manufactured in accordance with specification P4-32689-G01 and referenced drawing 9439-869 under Cage Code 75774. The item is classified under NAICS code 332919 and is issued by the Department of Defense through SPRMM1 DLA Mechanicsburg in Pennsylvania, with a response deadline of July 24, 2026. The contract requires strict adherence to military packaging and marking standards, including MIL-STD-2073-1 for preservation, MIL-STD-129 for labeling, and specific requirements for DLR items with yellow DLR text on blue backgrounds. Packaging levels vary by shipment type: Level B for domestic and air shipments, and Level A for surface shipments overseas. The valve must be delivered ASAP to two designated locations, two units to W25GIU and one to W62GT, with FOB terms as “other” per the schedule. All shipments must include full supply chain traceability documentation including CAGE code, NSN, lot or date codes, and intermediaries. The solicitation mandates full compliance with DFARS and FAR security and administrative clauses, including DFARS 252.204-7012 for safeguarding covered defense information and cyber incident reporting under Revision 1 of Deviation 2024-00013, DFARS 252.223-7001 for hazard warning labels, and DFARS 252.232-7006 for Wide Area Workflow (WAWF) payment instructions. Contractors must register in SAM.gov and WAWF, submit invoices and receiving reports electronically via WAWF using web entry, EDI, or FTP, and comply with NIST SP 800-171 for protecting controlled unclassified information. Mandatory use of Workflow Pro’s Mod Assist Module is required. Offers must be technically acceptable without exceptions to solicitation terms, with award determined on a lowest-priced, technically acceptable basis. The Supplier Performance Risk System (SPRS) will be leveraged to assess past performance, and all offers must include a surplus material certificate if applicable. Any alternate product proposal must

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

VALVE,SAFETY RELIEFThis contract pertains to the procurement of a SAFETY RELIEF VALVE under solicitation SPRMM126QGF31, issued by the Defense Logistics Agency (DLA) Mechanicsburg, with a response deadline of August 17, 2026. The requirement is governed by strict technical and quality standards, including compliance with MIL-DTL-901 for shock testing if new casting suppliers are used, and adherence to MIL-STD-130 Rev N for part marking. The contractor must supply the item under specified Cage Codes and Reference Numbers, with any design, material, or part number changes requiring prior written approval from the NAVICP-MECH Contracting Officer and classification under one of six defined change codes. Inspection and acceptance are to occur at the source, with the contractor responsible for all quality assurance processes, including maintaining inspection records for 365 days after final delivery. Packaging must conform to MIL-STD-2073, and the item is subject to the mandatory use of the Wide Area Workflow (WAWF) system for electronic invoice and receiving report submission. Only authorized distributors of the original equipment manufacturer are eligible for award, requiring proof of authorization submitted with the offer. The procurement follows the Lowest Price Technically Acceptable (LPTA) evaluation method and is exempted by military service. The contract mandates compliance with numerous Department of Defense directives, including security prohibitions, small business program representations, and mandatory use of Workflow Pro for assist modules. Technical data is not provided, and all applicable documents must be obtained directly by the contractor from official DOD sources. Contractors must register for the Procurement Integrated Enterprise Environment (PIEE) and Electronic Data Access (EDA) to monitor contract actions and submit orders electronically. Delivery times are unspecified, and offers must include clear contact information, OEM details if not the manufacturer, and notification preferences for procurement updates. No drawings or technical specifications are furnished by the government, placing full responsibility on the contractor to meet all performance and compliance standards as outlined in referenced military specifications. All contractual documents are deemed issued upon electronic transmission, and any post-award changes are subject to administrative cost deductions.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

in about 1 month

BALL,VALVE,PORTEDThis contract pertains to the procurement of a ported valve ball under solicitation N0010426QFE38, with a revised quantity of 26 units and a final delivery deadline of 146 days after the contract’s effective date. The item is classified as SPECIAL EMPHASIS material (Level I) due to its critical role in shipboard systems, where failure could result in catastrophic consequences including loss of life or the vessel. All materials must be refurbished to “like new” or “A” condition through a comprehensive teardown, inspection, and repair process, with a firm fixed price submission required that includes both repair and beyond-repair pricing. The contract mandates strict traceability from raw material to finished component, requiring unique identification markings, chemical and mechanical certifications, and 100% verification of all documentation. Electronic submissions through WAWF are mandatory, using the updated DODAAC N50286, and all certification data must be reviewed and accepted by Portsmouth Naval Shipyard prior to shipment. The contractor must adhere to a quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025 or an acceptable alternative, and all welding, brazing, and heat treatment processes must comply with stringent navy specifications, including submission of procedures, qualification records, and welder certifications. Mercury is prohibited, and electronic signatures on certifications are accepted under strict controls. The contract operates under Emergency Acquisition Flexibilities and is DO-rated for national defense use under DPAS. All materials must be traceable through every manufacturing step, with certifications directly linked to physical markings on the ball and accompanying documentation. Re-work of the ball surface is permitted only within strict dimensional limits, and defects in the stem slot are acceptable only if they meet specified tolerance thresholds. Teflon coatings must conform to Chemours specifications, and welding on titanium or high-strength materials requires prior approval of procedures and qualified personnel. The contractor must maintain detailed inspection records, ensure proper segregation of materials to prevent commingling, and enforce all traceability and certification requirements on subcontractors. Final inspection requires zero-defect acceptance, with lot sizing governed by ANSI/ASQ Z1.4 or 100% inspection for small lots. Certification documents must include unqualified, affirmative statements of compliance and cannot include disclaimers. Government Quality Assurance Representatives will conduct inspections at source, and any deviations or waivers must be formally requested and approved by the Contracting Officer. The

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

VALVE,GLOBEThis contract pertains to the procurement of a 1/4 inch globe valve designated as Special Emphasis material, intended for use in a critical shipboard system where failure could result in catastrophic consequences including loss of life or the ship itself. The valve must strictly comply with Carleton drawing 1970 002 and a comprehensive set of military and industry specifications including MIL-STD-1330, MIL-T-1368, ASTM-B150, and QQ-N-281, with specific requirements for oxygen cleaning, pressure testing, and material traceability. The item requires rigorous quality assurance protocols, including 100% inspection of certification data, traceability marking on all components, and adherence to ISO-9001 or MIL-I-45208 quality systems. All welding and brazing must conform to S9074-AQ-GIB-010/248 or S9074-AR-GIB-010A/278, with all procedures and qualifications submitted for prior Navy approval. The material must be free of mercury, and traceability must be maintained from raw material through final assembly to the certified test reports, with each part bearing a unique traceability number and a CID number 887056134. The contract mandates full compliance with government inspection at source, requiring direct coordination with the Defense Contract Management Agency and submission of all documentation via the Wide Area Work Flow system to the Portsmouth Naval Shipyard prior to shipment. Certifications must include positive, unqualified statements of compliance, signed electronically or manually, and all data must be traceable to individual units. Subcontractors are subject to the same stringent controls, with prime contractors responsible for ensuring all tiered suppliers meet the contract’s quality and traceability requirements. The valve must pass rigorous proof and seat tightness pressure tests at 6750 PSIG and 4500 PSIG respectively, with no leakage or permanent deformation permitted. Delivery is FOB destination, and the contract is issued under Emergency Acquisition Flexibilities and is certified under the Defense Priorities and Allocations System. The solicitation requires electronic submission of technical documentation including welding procedures, material certifications, and quality system records via ECDS and WAWF, with strict deadlines and mandatory review cycles before production or shipment can proceed.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

PARTS KIT,BALL VALVThis contract specifies the procurement of a specialized ball valve parts kit for use in a critical shipboard system, where failure could result in catastrophic consequences including loss of life or vessel. The material, designated as SPECIAL EMPHASIS Level I, mandates stringent quality controls, full traceability from raw material to finished component, and comprehensive certification of chemical and mechanical properties. The ball component must conform to SAE-AMS-6931 or Centrifugally cast 6AL-4V per ASTM-B367, with strict mechanical requirements and mandatory ultrasonic inspection per SAE-AMS-6931 and SAE-AMS-2631. The seats must be manufactured by Mearthane Products Inc. from MD71-GG Mearthane, with specific physical properties including hardness, tensile strength, and water absorption, all verified by test reports. Hydrostatic testing is required for each ball with a 30-minute hold at confidential pressures referenced by drawing, with dye penetrant inspection as a permitted alternative if hydrostatic fixtures are unavailable. All components require full traceability through unique heat, lot, or batch markings permanently applied to the material, with strict controls to prevent commingling and ensure documentation integrity. Certification data must be submitted via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard for review and acceptance prior to shipment, using designated DODAAC codes and notification email. Quality system compliance with ISO-9001, ISO-10012, and ISO/IEC 17025 is mandatory, and all welding, brazing, and repair activities must adhere to specified Navy standards (S9074 series) with procedures and qualifications submitted for approval before production. Government Quality Assurance at source is required, and deliveries may only proceed upon formal acceptance. The contract includes strict provisions for configuration control, engineering change proposals, and prohibition of mercury or unauthorized coatings, with all documentation and testing records subject to 100% government scrutiny. The procurement is classified as a total small business set-aside and is rated under the Defense Priorities and Allocations System for national defense use.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

ELBOW,5INThe contract pertains to the procurement of a 5-inch elbow under solicitation N0010426QEA20, issued by the Naval Supply Systems Command Weapon Systems Support (NAVSUP WSS) Mechanical Division, with a response deadline of August 17, 2026. It incorporates a comprehensive set of federal and military requirements, including mandatory use of the Wide Area Workflow payment system, cybersecurity maturity certification, small business set-aside status, and strict compliance with inspection, packaging, and quality assurance standards defined in the Individual Repair Part Ordering Data (IRPOD). Technical documentation referenced in the IRPOD, drawings, and specifications—many marked NOFORN—must be obtained through the secured BPMI e-Commerce portal and adhered to in their full, cited revisions, with no partial use of document revisions permitted without explicit contracting officer approval. The order of precedence clearly establishes that contract amendments take priority over all other documents, followed by the schedule, terms and conditions, IRPOD, STRs, drawings, and specifications. Quality assurance is governed by the IRPOD, requiring the contractor to maintain a government-acceptable inspection system with full records retained for the contract duration and beyond. Packaging must comply with MIL-PRF-23199, particularly regarding heat-sealed envelopes for components subject to cleanliness controls from MIL-STD-767, MIL-STD-2041, or similar standards, while fire-retardant packaging is explicitly no longer required. Mercury and mercury compounds are strictly prohibited from contact with supplied hardware. The contractor must submit pre-manufacturing procedures and test reports within 45 days of award and upon contract completion, using standardized DD Form 1423 sequences as specified in DI-QCIC-8871 and DI-QCIC-8872. All submissions must be prepared per unique contract, NSN, and item nomenclature combinations, and distribution of technical data is restricted based on DoD distribution codes, with foreign nationals explicitly prohibited from access without prior Naval Sea Systems Command authorization. The contracting officer must approve all deviations, delivery delays, or non-conformances with full justification and technical data supporting the proposed alternative.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Transportation and Delivery to Fort StewartThe contract involves the transportation and delivery of 20 military cans to Fort Stewart, Georgia, under FOB origin terms, meaning the seller is responsible for placing the items at the point of origin and the buyer assumes all costs and risks once the goods are loaded onto the carrier. Delivery must be handled via non-parcel post, trackable freight services approved for access to military installations, ensuring secure and traceable movement of the shipment. The service must comply with military logistics protocols to guarantee timely and confirmed delivery without use of standard commercial parcel services. The solicitation is classified as a subcontract under NAICS code 484220, which pertains to truck transportation for local and long-distance freight, and is managed by the Defense Logistics Agency under the Department of Defense. The contract was posted on July 17, 2026, with no set-aside designation, indicating it is open to all eligible vendors. The place of performance is confined to Fort Stewart, GA, and fulfillment requires full adherence to military receiving standards and documentation.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Packaging and Labeling Services for Military ShipmentThe contract requires the provision of packaging, preservation, and labeling services for military cans in full compliance with Defense Logistics Agency standards, ensuring all items meet federal requirements for defense shipment readiness. Critical elements include the application of TCN markings and explicit contract identification labels to ensure traceability and accountability throughout the supply chain. All work must adhere to precise technical specifications governing material integrity, environmental protection, and regulatory compliance for military logistics. This is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with a NAICS code of 561910 indicating it falls under Other Support Activities for Transportation. The contract was posted on July 17, 2026, and performance is expected to support defense-wide distribution needs. The official record is accessible through the DIBBS system with the referenced contract and delivery identifiers. No specific location or contact details are provided, indicating that performance may be conducted at multiple approved vendor facilities across the nation or internationally, subject to DLA oversight and quality assurance protocols.

Packaging and Labeling Services

POSTED

DEADLINE

Supply of Military Cans (NSN 7240013375268)The contract entails the manufacture and delivery of 20 military-grade metal cans identified by NSN 7240013375268, ensuring full compliance with all applicable military specifications for durability, safety, and performance. Each unit must be packaged and labeled in strict accordance with Department of Defense standards to facilitate proper handling, tracking, and inventory management during transit. The finished goods are to be shipped to Fort Stewart, Georgia, with all documentation and labeling aligned to federal supply chain protocols. This is a subcontract under the Defense Logistics Agency, classified under NAICS code 332439 for other fabricated metal product manufacturing. The solicitation was posted on July 17, 2026, and while no set-aside type is specified, the work is part of a broader defense supply effort. The contract is linked to award SPE7MX21D0016 and delivery order SPE7MX26F8914, with performance obligations centered on meeting exacting military requirements without deviation. No point of contact or specific address details are provided, but compliance with DLA and DoD regulations governs all aspects of production and delivery.

Other Metal Container Manufacturing

POSTED

DEADLINE

Supply of Engine Lubricating Oil (NSN 9150014961946)The contract requires the supply and delivery of twenty cannisters of military-specification engine lubricating oil identified by National Stock Number 9150014961946 to Joint Base Lewis-McChord in Washington. The lubricating oil must comply with all applicable military standards, including MIL-STD-129 and MIL-STD-130 for proper marking and labeling to ensure interoperability and traceability within the Department of Defense supply chain. The order is DPAS-rated, indicating its priority status for national defense purposes, and must be fulfilled according to strict deadlines and quality controls to maintain mission readiness. The contract is structured as a subcontract under the Department of Defense, administered by the Defense Logistics Agency, and governed by NAICS code 324191 which pertains to other petroleum and coal products manufacturing. Delivery must be completed to the specified military installation with full adherence to federal procurement protocols and documentation requirements.

Petroleum Lubricating Oil and Grease Manufacturing

POSTED

DEADLINE

Non-Rechargeable Battery SupplyThe contract is for the supply of one non-rechargeable battery identified by NSN 6135008357210, procured as a commercial off-the-shelf item with no integration, installation, or additional services required. The item falls under NAICS code 335911 and is being acquired under a subcontract by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 17, 2026, and the contract reference is linked to award SPE7M117D0001 with delivery order SPE7LX26F72P1. No specific location, point of contact, or set-aside classification is provided, indicating a straightforward procurement of a standard military battery component without geographic or contractual restrictions beyond the standard DLA processes.

Storage Battery Manufacturing

POSTED

DEADLINE

Logistics and Delivery FulfillmentThe contract requires the execution of traceable FOB destination delivery of NSN-labeled enamel paint to Fort Bliss, Texas, with strict adherence to government shipping and handling standards. All shipments must be fully tracked from origin to delivery, ensuring real-time visibility and accountability throughout the logistics chain. Proof of delivery is mandatory, confirming accurate receipt by authorized personnel at the designated location. Compliance with Defense Logistics Agency protocols for labeling, packaging, and documentation is essential to meet federal procurement requirements. The work is classified as a subcontract under NAICS code 484220, indicating a focus on truck transportation of freight. The contract is issued by the Department of Defense through the Defense Logistics Agency and pertains to a specific delivery obligation tied to a government procurement action. While the solicitation number and exact origination point are not specified, the delivery destination is clearly defined, and all activities must align with military logistics frameworks to ensure operational readiness and supply chain integrity.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Enamel Supply and DeliveryThe contract pertains to the supply and delivery of two pints of military-spec enamel paint, identified by NSN 8010013316108, to Fort Bliss, Texas, with FOB destination terms ensuring the seller bears all costs and risks until the goods arrive at the designated location. The paint must meet all applicable military specifications and be marked in full compliance with government labeling standards, including proper identification, lot numbers, and handling instructions. Invoicing must adhere strictly to federal procurement guidelines to ensure timely and accurate payment processing. The contract is classified as a subcontract under NAICS code 325510, indicating operations within the paint and coating manufacturing industry, and is administered by the Defense Logistics Agency under the Department of Defense. Delivery is expected to occur under the contract reference SPE8ES26F63KG with an award posting date of July 17, 2026.

Paint and Coating Manufacturing

POSTED

DEADLINE

Nonrechargeable Battery Supply (NSN 6135009857845)The contract pertains to the supply of four nonrechargeable batteries bearing the National Stock Number 6135009857845, manufactured to meet strict military specifications. Full traceability is mandatory throughout the production and delivery process, ensuring each unit can be tracked from origin to final acceptance. Each battery must be properly marked in accordance with defense standards, including appropriate labeling for identification, serialization, and compliance. Delivery is to be made FOB origin, meaning the supplier assumes all responsibility and risk until the batteries are loaded at the designated shipping point. The contract is classified as a subcontract under NAICS code 335912, and is managed by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 17, 2026, and while no specific point of contact or place of performance is listed, the award information can be accessed through the official DIBBS portal.

Primary Battery Manufacturing

POSTED

DEADLINE

Defense Logistics Packaging, Labeling, and Shipment CoordinationThe contract encompasses comprehensive packaging, labeling, and shipment coordination services for Defense Logistics Agency requirements, with strict adherence to MIL-STD-129 standards for labeling and documentation. It requires full integration with DLA’s Vendor Shipment Module for managing the entire outbound logistics process, including the timely submission of Shipment Information Records and correct application and management of TAC codes to ensure accurate tracking and delivery. All final packaging must meet federal military specifications to guarantee readiness and compatibility with DLA’s distribution networks. The work is executed as a subcontract under NAICS code 488510, supporting Department of Defense logistics operations without any set-aside provisions, and is tied to the broader contractual framework referenced through the DIBBS portal under award and delivery identifiers.

Freight Transportation Arrangement

POSTED

DEADLINE

Precision Shaft Manufacturing and AssemblyThe contract involves the manufacture and final assembly of a stub shaft compression component to exact military specifications, requiring precision machining, controlled heat treatment, rigorous inspection protocols, and secure packaging suitable for defense logistics. All work must adhere to stringent quality standards to ensure operational reliability in military applications, with final delivery aligned to defense supply chain requirements. The subcontract is managed under the Department of Defense through the Defense Logistics Agency, with NAICS code 332998 indicating it falls under other fabricated metal product manufacturing. The contract was posted on July 17, 2026, and performance is expected to support military logistics operations without specified geographic constraints, though all components must meet defense-grade specifications for deployment. Final delivery documentation and packaging will conform to established defense shipping standards.

Enameled Iron and Metal Sanitary Ware Manufacturing

POSTED

DEADLINE

Packaging, Labeling, and Domestic ShippingThe contract requires the final packaging, labeling, and domestic shipment of finished bushings to the Defense Logistics Agency, with strict adherence to MIL-STD-129 for labeling and WAWF for invoicing. All packaging and labeling must comply with NSN and CAGE code requirements to ensure seamless integration into the Department of Defense supply chain. The work involves end-to-end handling of the finished products, from secure packaging to delivery, ensuring full traceability and regulatory compliance throughout the logistics process. The performance is governed by federal acquisition standards and must align with DLA’s operational protocols for receiving and inventory management. This subcontract, classified under NAICS code 484220 for truck transportation and related services, is issued by the Department of Defense through the Defense Logistics Agency and is scheduled for performance beginning July 17, 2026. While no specific place of performance or point of contact is provided, the delivery destination is clearly defined as DLA facilities within the United States. The contract mandates precise documentation and electronic invoicing via WAWF, highlighting the critical role of administrative accuracy alongside physical logistics. Compliance with all military standards is non-negotiable, and failure to meet labeling or shipping requirements may result in rejection of the delivered goods.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Raw Material Supply for Precision BearingsThe contract encompasses the supply of high-grade metals and alloys including bronze and stainless steel specifically for use in manufacturing precision sleeve bushings, requiring full certified material traceability and strict adherence to military or aerospace standards. All materials must meet rigorous quality controls to ensure reliability and performance in critical defense and aerospace applications, with documentation verifying origin, composition, and conformity to specified technical requirements. This is a subcontract under the Defense Logistics Agency’s Department of Defense procurement system, classified under NAICS code 423520 for metals and minerals merchant wholesalers. The contract was posted on July 17, 2026, and is tied to award number SPE4A626P6689, with performance expectations aligned to defense supply chain integrity requirements. While specific placement of performance is not detailed, delivery and compliance obligations are bound to federal defense procurement protocols, ensuring secure and auditable sourcing of mission-critical components.

Coal and Other Mineral and Ore Merchant Wholesalers

POSTED

DEADLINE