Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

COLLAR, RECEPTION CO

Active
SPE4A7-26-Q-0844Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a single slider block, split, for a fuel line with NSN 1680-00-064-0295, with a delivery requirement of 219 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the applicable revision is determined by the solicitation issue date or award date depending on the acquisition size. Inspections and acceptance must occur at the supplier’s origin, and any non-accepted supplies must have government identification removed prior to return. Item Unique Identification is not required as specified by the service customer, with DFARS 252.211-7003(c)(1)(i) governing this exemption. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and formal approval from DLA. The solicitation number is SPE4A7-26-Q-0844, with a response deadline of July 29, 2026, and the contracting office is the Department of Defense’s ASC Supplier Oper AE and AF Division, with Brian Kurtz as the primary point of contact.

General Info

Procure single slider block for fuel line, 219-day delivery, export-controlled, DFARS compliance, DLA contract, response due July 29, 2026

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A7-26-Q-0844 for Slider Block Fuel Line

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Brian Kurtz
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SLIDER BLOCK, SPLIT, FUEL LINE RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1680-00-064-0295 Quantity: 1 EA Purchase Request: 7015386008QTY: 1 Delivery: 219 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332919
New
Federal
SPRMM1-26-Q-GB18-GATE, VALVE, 10 IN.The solicitation SPRMM1-26-Q-GB18 seeks three units of a 10-inch gate valve with NSN 4820-01-700-0383, manufactured to specifications outlined in design documentation 75774, P4-32689-G01, and 9439-870, with a TDP version of 001 and a shelf life of 0-00. The item must be physically identified per MIL-STD-130 Rev N and comply with all applicable government quality and inspection standards, including FAR 52.246-2 and 52.246-3, with inspections and acceptance conducted at the contractor’s or subcontractor’s plant. The contractor is required to implement NIST SP 800-171 security controls and adhere to DFARS 252.204-7012 for safeguarding covered defense information and reporting cyber incidents, with deviation 2024-00013, Revision 1, in effect. Packaging and marking must follow MIL-STD-2073-1 for overseas and stock shipments, ASTM D3951-18 for CONUS immediate-use shipments, and MIL-STD-129 for all labeling, including mandatory inclusion of PIID, CLIN, and SubCLIN for spares, with DLR labeling required for items with specific Cognizance Codes. Palletization must conform to MIL-STD-147 and ANSI MH1-2016, and all wood packaging must comply with ISPM 15 and bear the ALSC mark. Hazardous materials must be labeled under 29 CFR 1910.1200 and packaged per 49 CFR Performance Oriented Packaging standards. Delivery is FOB destination to the DDSP New Cumberland Facility in New Cumberland, PA, with no specified delivery date other than ASAP, and electronic invoicing via WAWF is required under DFARS 252.232-7003. The solicitation is automated, uses NAICS code 332919 with a small business size standard of 750 employees, and requires SAM registration and certification compliance including representations on foreign ownership, trade agreements, Buy American, cybersecurity, and whistleblower rights. Offers must include OEM details if not the
SPRMM1 DLA Mechanicsburg

POSTED

about 21 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332919
New
Federal
SPRMM1-26-Q-GB23-GATE, VALVE, 10 IN.The solicitation SPRMM1-26-Q-GB23 seeks three units of a 10-inch gate valve identified by NSN 7HH 4820-01-700-0374, manufactured in accordance with specification P4-32689-G01 and referenced drawing 9439-869 under Cage Code 75774. The item is classified under NAICS code 332919 and is issued by the Department of Defense through SPRMM1 DLA Mechanicsburg in Pennsylvania, with a response deadline of July 24, 2026. The contract requires strict adherence to military packaging and marking standards, including MIL-STD-2073-1 for preservation, MIL-STD-129 for labeling, and specific requirements for DLR items with yellow DLR text on blue backgrounds. Packaging levels vary by shipment type: Level B for domestic and air shipments, and Level A for surface shipments overseas. The valve must be delivered ASAP to two designated locations, two units to W25GIU and one to W62GT, with FOB terms as “other” per the schedule. All shipments must include full supply chain traceability documentation including CAGE code, NSN, lot or date codes, and intermediaries. The solicitation mandates full compliance with DFARS and FAR security and administrative clauses, including DFARS 252.204-7012 for safeguarding covered defense information and cyber incident reporting under Revision 1 of Deviation 2024-00013, DFARS 252.223-7001 for hazard warning labels, and DFARS 252.232-7006 for Wide Area Workflow (WAWF) payment instructions. Contractors must register in SAM.gov and WAWF, submit invoices and receiving reports electronically via WAWF using web entry, EDI, or FTP, and comply with NIST SP 800-171 for protecting controlled unclassified information. Mandatory use of Workflow Pro’s Mod Assist Module is required. Offers must be technically acceptable without exceptions to solicitation terms, with award determined on a lowest-priced, technically acceptable basis. The Supplier Performance Risk System (SPRS) will be leveraged to assess past performance, and all offers must include a surplus material certificate if applicable. Any alternate product proposal must
SPRMM1 DLA Mechanicsburg

POSTED

about 21 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332919
New
Federal
VALVE,SAFETY RELIEFThis contract pertains to the procurement of a SAFETY RELIEF VALVE under solicitation SPRMM126QGF31, issued by the Defense Logistics Agency (DLA) Mechanicsburg, with a response deadline of August 17, 2026. The requirement is governed by strict technical and quality standards, including compliance with MIL-DTL-901 for shock testing if new casting suppliers are used, and adherence to MIL-STD-130 Rev N for part marking. The contractor must supply the item under specified Cage Codes and Reference Numbers, with any design, material, or part number changes requiring prior written approval from the NAVICP-MECH Contracting Officer and classification under one of six defined change codes. Inspection and acceptance are to occur at the source, with the contractor responsible for all quality assurance processes, including maintaining inspection records for 365 days after final delivery. Packaging must conform to MIL-STD-2073, and the item is subject to the mandatory use of the Wide Area Workflow (WAWF) system for electronic invoice and receiving report submission. Only authorized distributors of the original equipment manufacturer are eligible for award, requiring proof of authorization submitted with the offer. The procurement follows the Lowest Price Technically Acceptable (LPTA) evaluation method and is exempted by military service. The contract mandates compliance with numerous Department of Defense directives, including security prohibitions, small business program representations, and mandatory use of Workflow Pro for assist modules. Technical data is not provided, and all applicable documents must be obtained directly by the contractor from official DOD sources. Contractors must register for the Procurement Integrated Enterprise Environment (PIEE) and Electronic Data Access (EDA) to monitor contract actions and submit orders electronically. Delivery times are unspecified, and offers must include clear contact information, OEM details if not the manufacturer, and notification preferences for procurement updates. No drawings or technical specifications are furnished by the government, placing full responsibility on the contractor to meet all performance and compliance standards as outlined in referenced military specifications. All contractual documents are deemed issued upon electronic transmission, and any post-award changes are subject to administrative cost deductions.
SPRMM1 DLA Mechanicsburg

POSTED

about 21 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
BALL,VALVE,PORTEDThis contract pertains to the procurement of a ported valve ball under solicitation N0010426QFE38, with a revised quantity of 26 units and a final delivery deadline of 146 days after the contract’s effective date. The item is classified as SPECIAL EMPHASIS material (Level I) due to its critical role in shipboard systems, where failure could result in catastrophic consequences including loss of life or the vessel. All materials must be refurbished to “like new” or “A” condition through a comprehensive teardown, inspection, and repair process, with a firm fixed price submission required that includes both repair and beyond-repair pricing. The contract mandates strict traceability from raw material to finished component, requiring unique identification markings, chemical and mechanical certifications, and 100% verification of all documentation. Electronic submissions through WAWF are mandatory, using the updated DODAAC N50286, and all certification data must be reviewed and accepted by Portsmouth Naval Shipyard prior to shipment. The contractor must adhere to a quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025 or an acceptable alternative, and all welding, brazing, and heat treatment processes must comply with stringent navy specifications, including submission of procedures, qualification records, and welder certifications. Mercury is prohibited, and electronic signatures on certifications are accepted under strict controls. The contract operates under Emergency Acquisition Flexibilities and is DO-rated for national defense use under DPAS. All materials must be traceable through every manufacturing step, with certifications directly linked to physical markings on the ball and accompanying documentation. Re-work of the ball surface is permitted only within strict dimensional limits, and defects in the stem slot are acceptable only if they meet specified tolerance thresholds. Teflon coatings must conform to Chemours specifications, and welding on titanium or high-strength materials requires prior approval of procedures and qualified personnel. The contractor must maintain detailed inspection records, ensure proper segregation of materials to prevent commingling, and enforce all traceability and certification requirements on subcontractors. Final inspection requires zero-defect acceptance, with lot sizing governed by ANSI/ASQ Z1.4 or 100% inspection for small lots. Certification documents must include unqualified, affirmative statements of compliance and cannot include disclaimers. Government Quality Assurance Representatives will conduct inspections at source, and any deviations or waivers must be formally requested and approved by the Contracting Officer. The
Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in 19 days
View Details
NAICS: 332919
New
Federal
VALVE,GLOBEThis contract pertains to the procurement of a 1/4 inch globe valve designated as Special Emphasis material, intended for use in a critical shipboard system where failure could result in catastrophic consequences including loss of life or the ship itself. The valve must strictly comply with Carleton drawing 1970 002 and a comprehensive set of military and industry specifications including MIL-STD-1330, MIL-T-1368, ASTM-B150, and QQ-N-281, with specific requirements for oxygen cleaning, pressure testing, and material traceability. The item requires rigorous quality assurance protocols, including 100% inspection of certification data, traceability marking on all components, and adherence to ISO-9001 or MIL-I-45208 quality systems. All welding and brazing must conform to S9074-AQ-GIB-010/248 or S9074-AR-GIB-010A/278, with all procedures and qualifications submitted for prior Navy approval. The material must be free of mercury, and traceability must be maintained from raw material through final assembly to the certified test reports, with each part bearing a unique traceability number and a CID number 887056134. The contract mandates full compliance with government inspection at source, requiring direct coordination with the Defense Contract Management Agency and submission of all documentation via the Wide Area Work Flow system to the Portsmouth Naval Shipyard prior to shipment. Certifications must include positive, unqualified statements of compliance, signed electronically or manually, and all data must be traceable to individual units. Subcontractors are subject to the same stringent controls, with prime contractors responsible for ensuring all tiered suppliers meet the contract’s quality and traceability requirements. The valve must pass rigorous proof and seat tightness pressure tests at 6750 PSIG and 4500 PSIG respectively, with no leakage or permanent deformation permitted. Delivery is FOB destination, and the contract is issued under Emergency Acquisition Flexibilities and is certified under the Defense Priorities and Allocations System. The solicitation requires electronic submission of technical documentation including welding procedures, material certifications, and quality system records via ECDS and WAWF, with strict deadlines and mandatory review cycles before production or shipment can proceed.
Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in 23 days
View Details
NAICS: 332919
New
Federal
PARTS KIT,BALL VALVThis contract specifies the procurement of a specialized ball valve parts kit for use in a critical shipboard system, where failure could result in catastrophic consequences including loss of life or vessel. The material, designated as SPECIAL EMPHASIS Level I, mandates stringent quality controls, full traceability from raw material to finished component, and comprehensive certification of chemical and mechanical properties. The ball component must conform to SAE-AMS-6931 or Centrifugally cast 6AL-4V per ASTM-B367, with strict mechanical requirements and mandatory ultrasonic inspection per SAE-AMS-6931 and SAE-AMS-2631. The seats must be manufactured by Mearthane Products Inc. from MD71-GG Mearthane, with specific physical properties including hardness, tensile strength, and water absorption, all verified by test reports. Hydrostatic testing is required for each ball with a 30-minute hold at confidential pressures referenced by drawing, with dye penetrant inspection as a permitted alternative if hydrostatic fixtures are unavailable. All components require full traceability through unique heat, lot, or batch markings permanently applied to the material, with strict controls to prevent commingling and ensure documentation integrity. Certification data must be submitted via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard for review and acceptance prior to shipment, using designated DODAAC codes and notification email. Quality system compliance with ISO-9001, ISO-10012, and ISO/IEC 17025 is mandatory, and all welding, brazing, and repair activities must adhere to specified Navy standards (S9074 series) with procedures and qualifications submitted for approval before production. Government Quality Assurance at source is required, and deliveries may only proceed upon formal acceptance. The contract includes strict provisions for configuration control, engineering change proposals, and prohibition of mercury or unauthorized coatings, with all documentation and testing records subject to 100% government scrutiny. The procurement is classified as a total small business set-aside and is rated under the Defense Priorities and Allocations System for national defense use.
Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
ELBOW,5INThe contract pertains to the procurement of a 5-inch elbow under solicitation N0010426QEA20, issued by the Naval Supply Systems Command Weapon Systems Support (NAVSUP WSS) Mechanical Division, with a response deadline of August 17, 2026. It incorporates a comprehensive set of federal and military requirements, including mandatory use of the Wide Area Workflow payment system, cybersecurity maturity certification, small business set-aside status, and strict compliance with inspection, packaging, and quality assurance standards defined in the Individual Repair Part Ordering Data (IRPOD). Technical documentation referenced in the IRPOD, drawings, and specifications—many marked NOFORN—must be obtained through the secured BPMI e-Commerce portal and adhered to in their full, cited revisions, with no partial use of document revisions permitted without explicit contracting officer approval. The order of precedence clearly establishes that contract amendments take priority over all other documents, followed by the schedule, terms and conditions, IRPOD, STRs, drawings, and specifications. Quality assurance is governed by the IRPOD, requiring the contractor to maintain a government-acceptable inspection system with full records retained for the contract duration and beyond. Packaging must comply with MIL-PRF-23199, particularly regarding heat-sealed envelopes for components subject to cleanliness controls from MIL-STD-767, MIL-STD-2041, or similar standards, while fire-retardant packaging is explicitly no longer required. Mercury and mercury compounds are strictly prohibited from contact with supplied hardware. The contractor must submit pre-manufacturing procedures and test reports within 45 days of award and upon contract completion, using standardized DD Form 1423 sequences as specified in DI-QCIC-8871 and DI-QCIC-8872. All submissions must be prepared per unique contract, NSN, and item nomenclature combinations, and distribution of technical data is restricted based on DoD distribution codes, with foreign nationals explicitly prohibited from access without prior Naval Sea Systems Command authorization. The contracting officer must approve all deviations, delivery delays, or non-conformances with full justification and technical data supporting the proposed alternative.
Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
RETAINER,SEAT,VALVEThe contract pertains to the procurement of a Retainer, Seat, Valve designated as SPECIAL EMPHASIS Level I material, critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The item must fully comply with Naval Ship Systems Command Drawing 801-6404739 and adhere to stringent quality and traceability controls. Materials are required to be QQ-N-286, annealed and age-hardened, with mandatory quantitative chemical and mechanical analysis, ultrasonic inspection of starting material, and slow strain rate tensile testing performed exclusively by approved laboratories. All traceability must be maintained from raw material through fabrication to final component via unique heat-lot markings, with electronic and physical records preserving integrity through every process step. Certification documentation must be 100% complete, legible, and signed, with electronic signatures accepted under strict identity verification protocols. No weld repair is permitted on QQ-N-286 material, internal threads must be cut not cold-formed, and mercury is strictly prohibited from contacting any supplied hardware. All deliveries must be preceded by certification data submission via WAWF to Portsmouth Naval Shipyard (N50286) for prior review and acceptance, with notifications sent to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL; no material may ship without formal acceptance. The contractor must maintain and document a quality system compliant with ISO-9001 and either ISO-10012 or ANSI-Z540.3 with ISO-17025, or alternatively MIL-I-45208 with MIL-STD-45662, subject to government audit. Thread inspections must follow FED-STD-H28 System 21 or 22 as applicable, and all packaging, preservation, and marking must conform to MIL-STD-2073. Subcontractors must be evaluated, monitored, and their quality controls aligned with prime contractor obligations. Any deviations or waivers require explicit Contracting Officer approval and must be classified as Critical, Major, or Minor. Final acceptance relies on zero-defect lot inspection per ANSI/ASQ Z1.4, with 100% verification of all certifications, traceability markings, and nondestructive test results. The contract is a total small business set-aside, rated under DPAS for national defense priority, and includes mandatory compliance with Buy American Act, Security Prohibitions, and other federal regulations. Delivery must be completed
Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
PARTS KIT,BALL VALVThis contract is a firm fixed-price repair purchase order issued by the Naval Supply Systems Command Weapon Systems Support (NAVSUP WSS) for the refurbishment of a ball valve parts kit designated as SPECIAL EMPHASIS material due to its critical role in shipboard systems, where failure could result in catastrophic consequences including loss of life or vessel. The work requires complete teardown, inspection, and repair of components to "like new" or "A" condition in strict compliance with Newport News Shipbuilding drawings 255583 and 255584, with specific materials including SAE-AMS-6931 for the ball and MD71-GG Mearthane for the seats manufactured exclusively by Mearthane Products Inc. All parts must retain traceability from raw material through final assembly via unique identification markings, with chemical and mechanical certifications required for metallic and non-metallic components and submitted as Objective Quality Evidence (OQE). The contractor must furnish complete certifications for ultrasonic inspection, non-destructive testing, and material composition, with no transcription or disclaimers permitted on documentation. The contract mandates adherence to ISO-9001 quality systems with supplementary calibration standards, and all welding, brazing, and repair activities must comply with S9074-AQ-GIB-010/248 and S9074-AR-GIB-010A/278, requiring prior submission and approval of procedures and qualification data. Traceability is strictly enforced, requiring permanent marking on all critical parts including the ball’s waterway and seat’s outer surface, with exceptions for Teflon seats requiring tagged identification. Final delivery is capped at 100 days after contract effective date, and all certification data must be submitted via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard (DODAAC N50286) with notification to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL; no shipment may occur without prior acceptance. The order is DO-rated under the Defense Priorities and Allocations System and issued under Emergency Acquisition Flexibilities. Contractors must also provide a beyond-repair price, comply with Buy American requirements, and adhere to mercury-free policies. Subcontractors are subject to the same quality controls, and the government reserves the right to conduct inspections at any facility. Past performance will be evaluated per FAR and DFARS guidelines, and all deviations or waivers require formal approval by the Contracting Officer.
Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
TAILPIECE,UNIONThis contract pertains to the procurement of a specialized tailpiece component, designated as SPECIAL EMPHASIS material (Level I), for use in a critical shipboard system where failure could result in catastrophic consequences including loss of life or the ship itself. The requirements are stringent, mandating strict adherence to Naval Sea Systems Command drawings and specifications, including ASME, ASTM, MIL-STD, and ISO standards, with particular emphasis on material traceability, chemical and mechanical certification, and non-destructive testing. The primary component, Tailpiece, piece 73-S1, made of ASTM-B369 UNS C96400, must undergo rigorous testing including hydrostatic pressure, dye penetrant inspection, weldability, and radiographic examination, with all results documented in certified reports that are fully traceable to unique heat-lot markings on the material. All welding and brazing activities must comply with Navy-specific procedures (S9074-AQ-GIB-010/248 and 0900-LP-001-7000), and qualification data must be submitted and approved prior to production. Radiographic shooting sketches must be submitted for approval 45 days before radiography, and final production radiography must be approved by Portsmouth Naval Shipyard before shipment. The contractor must operate under a certified quality system—either ISO-9001 with ISO-10012 and ISO/IEC 17025 or the alternate MIL-I-45208 and MIL-STD-45662—and is subject to Government Source Inspection by DCMA at all stages of production. All materials must be traceable from raw stock through every manufacturing and subcontracting step, with traceability markings permanently affixed and maintained even after assembly. Certification data, including test results and compliance statements, must be submitted via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard prior to each shipment, with specific designations for shipping, inspection, and acceptance using DODAAC N50286. The contract requires 100% inspection of all certification documents, zero-defect acceptance criteria during final inspection, and mandates that no material be shipped without prior written acceptance. Additionally, the contract is issued under Emergency Acquisition Flexibilities and is a DO-rated order under the Defense Priorities and Allocations System, with mandatory compliance to Buy American provisions, Small Business Subcontracting Plan requirements, and security protocols outlined in classified document DD Form
Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
STEM,FLUID VALVEThis contract pertains to the supply of a critical fluid valve stem, designated as SPECIAL EMPHASIS MATERIAL (Level I), intended for use in a shipboard system where failure could result in catastrophic consequences including loss of life, ship damage, or system failure. The item must strictly conform to Navships drawing 803-1385965 and specified material standards including ASTM-A182 Grade F6a, Class 2 or SAE-AMS-QQ-S-763 Class 410, Condition T, with additional requirements for hardness, welding, brazing, and traceability. All material must undergo rigorous chemical and mechanical testing, with certifications submitted electronically via WAWF and traceable through unique heat-lot markings permanently applied in accordance with MIL-STD-792. Electronic signatures are accepted for certifications, provided they are secured and uniquely attributable to authorized personnel, and all documentation must be accurate, unqualified, and free of disclaimers. The contract enforces stringent quality assurance controls requiring ISO-9001 and ISO-10012 or MIL-I-45208 with MIL-STD-45662 compliance for the contractor’s quality system, subject to government audits and source inspection. All subcontractors must adhere to the same requirements, with prime contractors responsible for monitoring supplier capability and ensuring traceability throughout procurement. Material certification reports, non-destructive testing records, and weld procedure qualifications must be submitted for review and approval prior to production, with each weld requiring a Certificate of Compliance and consumed weld metal documentation. Final acceptance is contingent on 100% inspection of traceability markings and certification data, with zero defect tolerance for lot acceptance. Delivery is limited to 365 days after contract effectiveness, with all shipments requiring prior WAWF acceptance by Portsmouth Naval Shipyard using DODAAC N50286 and notification to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL. This is a DO-rated order under the Defense Priorities and Allocations System, issued under Emergency Acquisition Flexibilities, with mandatory compliance to Buy American and Small Business subcontracting requirements, and all data submissions governed by ECDS.
Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
PARTS KIT,BALL VALVThis contract pertains to the repair and refurbishment of a critical ball valve component for naval shipboard systems, designated as Special Emphasis Level I material due to the high risk of failure that could result in loss of life, ship systems, or the vessel itself. The work must be performed to a firm fixed price, including teardown, inspection, and complete restoration to “like new” or “A” condition, with separate pricing required for beyond repair or beyond economic repair scenarios. The repair must strictly follow Naval Ship Systems Command Drawing 4385058, Engineering Notice DM117384, and related technical data packages, with specific requirements for material reuse, component replacement, and surface finishing. Critical parts include the ball (Piece 3) made of SAE-AMS-6931 or ASTM-B367 Grade C-5, and seats (Piece 6) fabricated from Dupont AF DE588 Teflon-filled acetal, each subject to precise chemical, mechanical, and dimensional testing. Traceability is mandatory from raw material to finished component, with unique heat/lot/batch markings permanently applied and verified against certification reports. All certifications must be 100% complete, unqualified, and submitted electronically via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard (DODAAC N50286) for review prior to shipment, with acceptance required before any material can be delivered. The contract enforces an exhaustive quality assurance regime, requiring compliance with ISO-9001 and ISO-10012 or MIL-I-45208 and MIL-STD-45662, along with stringent controls over welding, brazing, and non-destructive testing, all requiring prior approval of procedures and qualification data. All welds and repairs must adhere to S9074-AQ-GIB-010/248 or S9074-AR-GIB-010A/278, and filler metals must be accompanied by Certificates of Compliance. The contractor must maintain full traceability through every process step, ensure segregation of traceable materials, and prevent commingling with non-traceable goods. Final inspection mandates zero-defect acceptance criteria per ANSI/ASQ Z1.4, with 100% verification of material certifications, traceability markings, and NDT results. The product is subject to Government Quality Assurance at source, with Defense Contract Management
Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 541330
New
DIBBS
Quality Assurance & Inspection ServicesThe contract requires independent origin inspection and acceptance of manufactured parts to ensure full compliance with engineering drawings, technical specifications, and zero non-conformance standards. Inspectors must verify that all components meet exact quality criteria before acceptance, with no tolerance for defects or deviations. This effort is critical to maintaining the integrity of defense-related supply chains and ensuring that all delivered parts are fit for mission-critical applications. The contract is categorized as a subcontract under NAICS code 541330, associated with the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. It was posted on July 17, 2026, with responses due by July 29, 2026. The place of performance and specific office location are not detailed, but the work is tied to defense procurement processes managed through the DIBBS system. All parties must adhere to rigorous quality controls and documentation practices to fulfill the zero non-conformance mandate.
Engineering Services

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Government Surplus Property Handling & Repackaging ServicesThe contract seeks services to inspect, validate, repack, and document surplus government property for reuse or resale, ensuring strict adherence to federal labeling standards and chain-of-custody requirements. All activities must maintain regulatory compliance throughout the handling process, with a focus on preserving the integrity and traceability of items from intake to final disposition. This includes accurate documentation and proper packaging to meet federal guidelines, enabling seamless transition of materials into secondary markets or internal reuse programs. The solicitation falls under NAICS code 493190 and is classified as a subcontract, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The opportunity was posted on July 17, 2026, with responses due by July 29, 2026. While specific location details for performance or contact points are not provided, bidders must be prepared to support operations in alignment with DOD protocols and ensure full transparency in all handling procedures. The work is critical to maximizing the value of surplus assets while maintaining accountability across the federal supply chain.
Other Warehousing and Storage

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
Precision Machining of Fuel Line ComponentsThe contract involves the precision machining of a slider block intended for use in a fuel line assembly, requiring strict adherence to military specifications, approved technical data packages, and established quality standards. The component must be manufactured to exacting tolerances to ensure reliability and performance in demanding operational environments, with all processes and materials subject to rigorous inspection and documentation protocols. This subcontract falls under NAICS code 332613, indicating it is for other machine shop services, and is being managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 17, 2026, with responses due by July 29, 2026, and is accessible through the DIBBS platform. There is no set-aside designation specified, meaning the contract is open to all qualified suppliers regardless of business size or status. The place of performance and point of contact details are not provided, suggesting the contractor will coordinate directly with the procuring activity to finalize logistics and deliverables. Full compliance with technical requirements and quality assurance measures is mandatory, and failure to meet these standards may result in rejection or contract termination.
Spring Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) ServicesThe contract seeks specialized First Article Testing services for a military duct assembly, requiring full compliance with Department of Defense standards, including the proper execution of tests and submission of documentation such as DD Form 250. The work must be performed by a qualified small business as this is a Total Small Business Set-Aside under FAR 19.5, classified under NAICS code 541380 for other scientific and technical consulting services. All testing activities must align with military specifications and deliverables to ensure the duct assembly meets required performance, safety, and quality benchmarks before production. The solicitation, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, has a response deadline of July 29, 2026, and is accessible via the DIBBS platform. The place of performance and physical address details are unspecified, indicating flexibility in location, but the work must be completed in accordance with federal contract requirements. The contract structure is a subcontract, meaning the selected vendor will likely work under a prime contractor to supply certified test results and documentation critical to the military supply chain.
Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Supply of Military Duct AssemblyThe contract requires the manufacture, testing, packaging, and delivery of 39 military-grade duct assemblies identified by NSN 1660-00-799-5861, all of which must adhere strictly to applicable military specifications. Each unit must undergo First Article Testing to verify compliance with design and performance requirements, and must be uniquely identified with IUID marking to ensure traceability across the Defense Logistics Agency’s inventory system. The work is solicited as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns certified by the SBA are eligible to respond, and the NAICS code 332999 indicates the performance falls under Other Miscellaneous Fabricated Metal Product Manufacturing. The solicitation was posted on July 17, 2026, with a response deadline of July 29, 2026, and the contracting office is the ASC Supplier Oper AE and AF Division within the Department of Defense. All delivered items must be ready for immediate integration into military systems, with no deviation from the stated technical and administrative requirements.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332721
New
DIBBS
Precision Manufacturing of Threaded Tapered Pins (Critical Application Item)The contract requires the manufacture and supply of precision-machined tapered threaded pins designated as P/N AN386-3-16A and NSN 5315-00-265-9892, classified as a Critical Application Item due to their essential role in military systems. All components must strictly comply with applicable military specifications, ensuring dimensional accuracy, material integrity, and performance under demanding operational conditions. Rigorous quality control protocols are mandated, including full traceability of raw materials through every production stage, with documentation verifying origin, processing, and inspection results. Each unit must undergo inspection and certification to confirm adherence to technical requirements and avoid any risk of nonconformance. The solicitation, issued under the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, is structured as a subcontract and falls under NAICS code 332721 for machine shops. The response deadline is set for July 21, 2026, with the posting date on July 17, 2026. Place of performance details are unspecified, but the requirement for traceability and origin inspection implies that manufacturing and inspection activities must occur within approved facilities capable of meeting defense standards. The lack of a set-aside designation suggests this opportunity is open to all qualified suppliers, with the emphasis squarely on technical compliance, documentation rigor, and proven capability in producing mission-critical aerospace and defense hardware.
Precision Turned Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332813
New
DIBBS
Specialized Material Supply and ProcessingThe contract calls for the supply of alloy steel and corrosion-resistant materials alongside specialized processing services including heat treatment, plating, anodizing, and welding, all requiring full documentation, certification, and traceability to ensure compliance with stringent quality standards. The materials and services are intended to meet precise technical specifications critical for defense and aerospace applications, with all work subject to rigorous inspection and adherence to industry-approved protocols. Issued under the NAICS code 332813 for forge shops and foundries, this subcontract is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with responses due by July 24, 2026. The work is expected to be performed without geographic restriction specified, and all deliverables must be accompanied by comprehensive records verifying material origins, processing steps, and final inspections to ensure full accountability and readiness for military use.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing and Certification ServicesThe contract solicits independent testing and certification services for the first article unit, requiring comprehensive dimensional inspection, material verification, and nondestructive testing in compliance with ASTM-E1417 standards. The work must be performed to.validate conformance to technical specifications prior to formal acceptance, with all findings and documentation submitted to Hill Air Force Base. This subcontract is categorized under NAICS code 541380, indicating it falls within the scientific and technical consulting services sector, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 17, 2026, with a response deadline of July 24, 2026, requiring proposers to submit their offerings within this seven-day window. Performance is expected to be conducted in accordance with federal contracting requirements, though the specific place of performance and point of contact details are not provided.
Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332721
New
DIBBS
Precision Manufacturing of Quick Release Pin ReceptacleThe contract calls for the precision machining and production of a quick release pin receptacle designated by NSN 5342-01-049-0333, manufactured to strict military specifications with full compliance to all applicable effectivity bullets and MIL-STD-130 marking requirements. The component must meet all first article inspection criteria to ensure dimensional accuracy, material integrity, and functional performance in demanding operational environments. Production must be executed under a subcontracting arrangement, with adherence to defense procurement protocols governing quality assurance, traceability, and documentation. The solicitation was posted on July 17, 2026, with a response deadline of July 24, 2026, and falls under NAICS code 332721 for metal forging and stamping. The contracting organization is the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense, indicating direct relevance to military supply chain operations. Although no specific place of performance or point of contact is detailed, the requirement implies that all work must be performed by qualified suppliers capable of meeting defense-grade manufacturing standards and delivering fully compliant hardware on schedule.
Precision Turned Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332999
New
DIBBS
Supply of Blind Rivets (NSN 5320-00-883-9393)The contract entails the manufacture and delivery of exactly 70 units of a specific blind rivet identified by NSN 5320-00-883-9393, under a firm fixed-price arrangement, ensuring cost certainty for both parties. All items must comply with mandatory military packaging and labeling specifications to meet Department of Defense standards for readiness and logistics. The work is procured as a subcontract under NAICS code 332999, indicating it falls under other miscellaneous fabricated metal product manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the broader Department of Defense. The solicitation was posted on July 17, 2026, with responses required by July 21, 2026, establishing a tight, four-day window for submission. The place of performance and point of contact details are not specified, but the official solicitation is accessible via the DIBBS platform for further procurement details.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 3 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Freight LogisticsThe contract involves the transportation of manufactured units from their origin to designated government destinations, encompassing both domestic trucking and potential international ocean freight services. All logistics operations must strictly comply with U.S. cargo preference laws, ensuring compliance with federal requirements for the use of U.S.-flagged vessels and domestic carriers where applicable. The work is classified as a subcontract under NAICS code 484220, which pertains to truck transportation for moving goods, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Responses are due by July 19, 2026, with the solicitation posted on July 17, 2026, and all performance activities are tied to government-controlled endpoints without specified geographic limitations.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 16 hours ago

DEADLINE

in 1 day
View Details
NAICS: 326199
New
DIBBS
Specialized Packaging and PreservationThis contract mandates the application of military-compliant preservation and packaging standards in strict accordance with MIL-STD-2073-1E and MIL-STD-129R, ensuring that all items are protected for long-term storage and transportation under demanding conditions. The required procedures include vacuum sealing to eliminate moisture and contaminants, the inclusion of appropriate desiccants to maintain low humidity levels within packaging, and the placement of Type I (Code U) shelf-life labels that clearly indicate the expiration and storage requirements for the preserved items. These measures are essential to maintain the operational readiness and integrity of defense-grade equipment and components throughout their designated service life. The contract is structured as a subcontract under the NAICS code 326199, which corresponds to other plastic product manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on July 17, 2026, with a firm response deadline of July 19, 2026, indicating a tight turnaround for qualified vendors to submit proposals. The place of performance and point of contact details are unspecified, leaving full responsibility for logistics and coordination to the subcontractor. Compliance with all technical specifications and labeling requirements is mandatory, and failure to meet these standards may result in rejection of delivered goods or contract termination.
All Other Plastics Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 1 day
View Details