Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Precision Wiring Harness Manufacturing

Active

Federal

Response Deadline08/08/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the manufacture of 25 units of a branched military wiring harness with strict requirements for full traceability and compliance with established quality standards. All units must be produced to meet military specifications and delivered to CONUS stock points, ensuring timely and secure placement within the Department of Defense supply chain. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, aligning with FAR 19.5 regulations. The North American Industry Classification System code 335931 identifies the scope as wiring and wiring device manufacturing, underscoring the technical nature of the task. The solicitation was posted on July 25, 2026, with responses due by August 8, 2026, and falls under the ASC Commodities Division of the Department of Defense. The project emphasizes precision, accountability, and adherence to defense logistics protocols without specifying a single point of contact or physical performance location beyond the designated delivery destinations within the continental United States.

General Info

Manufacture 25 military wiring harnesses per specs, small business set-aside, deliver to CONUS stock points.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335931 - Current-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 25

subcontract

Response DeadlineAug 8

Submission deadline

Response Deadline

08/08/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture of 25 units of a branched military wiring harness with full traceability, quality compliance, and delivery to CONUS stock points.

Similar Contracts

Same NAICS industry code

WIRING HARNESS, BRANCHEDThe contract pertains to the procurement of 25 units of a branched wiring harness identified by NSN 5995-01-204-2606, with a delivery schedule of 434 days after contract award. The solicitation is a total small business set-aside under FAR 19.5, issued by the Defense Logistics Agency’s ASC Commodities Division, with a response deadline of August 8, 2026. Compliance with stringent technical and quality standards is mandatory, including adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and application of MIL-STD-1916 or ASQ H1331 for sampling unless otherwise directed. Critical, major, and minor attributes must be verified with specified levels or AQLs, and unspecified attributes are treated as major with zero non-conformance acceptance criteria. The item is subject to export control regulations under ITAR or EAR, restricting technical data disclosure to foreign persons without prior government authorization, and only contractors with approved JCP certification, completed DLA training, and explicit authorization may access such data. Additional requirements include DLA packaging standards, removal of government identification from rejected items, physical marking of bare items, inspection and acceptance at the manufacturer’s origin, and cybersecurity maturity certification at CMMC Level 2 for third-party assessors. All data and performance are governed under the terms of the solicitation SPE4A6-26-R-XB72.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

ARRESTER, LIGHTNINGThe contract is for the procurement of five lightning arresters with NSN 5920-01-714-7685 under solicitation SPE7M5-26-T-321D, issued by the Department of Defense’s Active Devices Division. Delivery is required within 168 days after receipt of order, with a firm delivery date of January 13, 2027, to the DLA Distribution facility at New Cumberland, Pennsylvania, under FOB Origin terms. The acquisition follows simplified procedures, potentially using a Lowest Price Technically Acceptable (LPTA) award methodology, though no formal evaluation factors, weights, or risk ratings are specified. Pricing is listed as $0.00, indicating incomplete or placeholder data, and no contract value can be determined. Compliance with DLA’s packaging requirements (RP001), MIL-STD-2073-1E for packaging, and MIL-STD-129 for marking—including mandatory barcoding and hazard labeling per 29 CFR 1910.1200—is strictly required. All items must be preserved using the CLNG/DRY method without supplemental materials. Payment and invoicing are required through the Wide Area WorkFlow system, with electronic submission of receiving reports and invoices mandatory. The contract incorporates numerous Federal Acquisition Regulation clauses addressing equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, hazardous materials, cybersecurity protections, subcontracting, inspection at destination, default, whistleblower rights, and prohibitions on certain defense telecommunications equipment and hazardous substances like hexavalent chromium. Offerors must provide a Unique Entity Identifier, CAGE Code, and represent their size and socioeconomic status, including disclosures for joint ventures. Specific representations regarding covered defense equipment and data safeguarding are triggered by 252.204-7016 and 252.204-7012, requiring compliance with NIST SP 800-171. The Technical and Quality Requirements are governed by the DLA Master List, with revisions effective on the solicitation issue date controlling simplified acquisitions. Proposals must be submitted exclusively via the DIBBS portal by July 29, 2026, with no physical submissions permitted.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

ARRESTER, LIGHTNINGThe contract solicitation SPE7M5-26-T-319E is for the procurement of seven lightning arresters identified by NSN 5920-01-714-7686 under a simplified acquisition framework managed by the Defense Logistics Agency’s Active Devices Division. Delivery is required at the DLA Distribution DDSP facility in New Cumberland, Pennsylvania, with a 168-day timeline from the date of order and FOB Origin terms, meaning the contractor assumes all shipping costs and risks until the product reaches the designated delivery point. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with preservation requiring cleaning and drying per method code 10 and no special preservation materials. Palletization complies with DLA’s RP001 packaging requirements. The solicitation, posted July 24, 2026, with a response deadline of July 29, 2026, does not include pricing data, and the contract value remains unlisted. Compliance with extensive regulatory and security obligations is mandatory, including adherence to NIST SP 800-171 for cybersecurity protection of controlled unclassified information, mandatory use of U.S.-flag vessels for ocean shipments unless a waived exception is obtained 45 days in advance, and strict labeling and documentation requirements for hazardous materials under OSHA’s Hazard Communication Standard. The contract incorporates multiple DFARS and FAR clauses addressing substitution of parts, inspection at destination, default, accelerated payments to small business subcontractors, prohibition of hexavalent chromium, avoidance of communist Chinese military company supplies, and electronic invoicing through WAWF. Offerors must provide UEIs and CAGE codes, disclose socioeconomic status, and complete representations regarding covered defense telecommunications equipment. Deviations are acknowledged for several clauses, including NIST controls, subcontracting for commercial items, and changes, indicating tailored compliance expectations. No evaluation factors or award methodology are explicitly defined, but the use of a simplified acquisition and absence of trade-off provisions suggest a likely LPTA approach. All submissions must be electronic via the DIBBS portal, with no physical submissions permitted.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

CONTACT, ELECTRICALThis contract pertains to the procurement of electrical contact components identified by NSN 5999-01-075-7359 and part number 1001123, with a total quantity of 650 units split across two line items: 295 units at $295.00 each and 355 units at $355.00 each, totaling $193,625. Delivery is required within 164 days from the contract award, with FOB origin terms applying. All items must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. The contract prohibits the intentional inclusion of mercury or mercury-containing compounds in the supplied hardware except for specific exempted applications such as batteries, fluorescent lights, and certain instruments as defined by NAVSEA, with additional safety requirements for portable devices containing mercury. Packaging and shipping must adhere to IP025 regulations for hazardous materials, and all shipments must be directed to two designated DLA distribution centers in New Cumberland, PA, and Barstow, CA. Inspection and acceptance occur at the destination, with zero variance allowed in quantities. The solicitation number is SPE7M5-26-T-326J, issued under full and open competition, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document, with compliance tied to the version in effect on the solicitation or award date depending on acquisition type. The unit of issue is each (EA), aligning with DoD standards, and all shipments must meet the required need ship date of January 5, 2027, with an original required delivery date of December 9, 2026.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

CABLE ASSEMBLY, SPECThe contract is a Request for Quotations issued by the Defense Logistics Agency’s Aviation Commodity Division for three units of a cable assembly identified by NSN 5995-01-694-7835, with delivery required within 295 days after receipt of order, targeting a ship date of May 16, 2027. The item is designated as a critical application component and must conform to drawing revision C dated December 30, 2012, with part number UA-2476 and technical documentation revision TDP Rev A Gen 1. The solicitation incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with specific provisions for physical identification, packaging, and marking in accordance with MIL-STD-2073-1E and MIL-STD-129, including mandatory use of QUP 001, packaging method 10, and unit container E5. Packaging and marking must also avoid mercury or mercury-containing compounds except in approved exceptions such as batteries, fluorescent lights, and certain NAVSEA-specified instruments, which must include a second containment boundary if portable. Inspection and acceptance occur at origin with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances for acceptance unless otherwise specified; quality systems must meet SAE AS9003 or ISO 9001 tailored to AS9003. The contract mandates compliance with export control regulations under ITAR or EAR, restricting access to technical data to offerors with approved US/Canada Joint Certification Program certification, completed training on handling DOD export-controlled data, and DLA approval. Participation requires submission of a Safety Data Sheet and representation in SAM confirming small business status and compliance with the Buy American Act and Berry Amendment. Electronic invoicing through WAWF is mandatory, with fast pay not applicable. Cybersecurity requirements include CMMC Level 2 certification for third-party assessors and full compliance with FAR clauses 252.204-7012 and 252.240-7997 for safeguarding covered defense information and NIST SP 800-171 adherence. Offers must be submitted via DIBBS by July 24, 2026, and the contract is not a small business set-aside, though HUBZone price evaluation preferences are available

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Input and Output Power Cabling SupplyThe contract is for the supply of WH-15 input and WOA-80M AC output cables to be integrated with the UFC-180H frequency converter system. It is a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to compete, and the North American Industry Classification System code is 335931, which corresponds to other electrical equipment and component manufacturing. The opportunity was posted on July 24, 2026, with a response deadline of August 17, 2026, at 6:00 PM. Performance is required at Cape May Ch, New Jersey, with a zip code of 08641. The contract falls under the Department of Defense and is managed by the FA4484 87 Cons Pk office. All submissions must meet technical specifications for compatibility with the UFC-180H system and adhere to the set-aside requirements for small business participation.

FA4484 87 Cons Pk

POSTED

DEADLINE

59--CONNECTOR,RECEPTACLThe U.S. Navy’s NAVSUP Weapon Systems Support in Philadelphia plans to award a sole-source contract to The Boeing Company for two units of a connector, receptacle part identified by NSN 0Q-5935-017222756-SX and part number D0090557-201, with delivery term FOB origin. This part is exclusively manufactured by the original equipment manufacturer, and the government holds no data or intellectual property rights that would allow procurement from alternative sources, making The Boeing Company the only viable supplier under 10 U.S.C. 2304(c)(1) and FAR 6.302. The acquisition is categorized under NAICS 335931 and PSC 500, with a contract duration of one year, subject to UID requirements and Buy American provisions. The procurement will follow FAR Part 15 procedures and will not utilize commercial item acquisition policies under FAR Part 12. All interested parties may submit capability statements within 45 days of the notice, but no competition is anticipated, and the government will not delay the process to consider new source approvals. The request for proposal is scheduled for release on July 24, 2026, with proposals due by August 24, 2026, and an anticipated award on September 24, 2026. The solicitation will be posted electronically via NECO, with no hard copies or phone inquiries accepted. All submissions must be directed via email to Deja Thompson-Mitchell.

Navsup Weapon Systems Support

POSTED

DEADLINE

59--CONNECTOR,ELECTRICThis contract governs the procurement of a specialized electrical connector assembly for critical shipboard use, designated as SPECIAL EMPHASIS material due to the high risk of failure that could result in loss of life, ship systems, or the vessel itself. The contractor must manufacture the assembly in strict compliance with Naval Sea Systems Command Drawing 7349938, MIL-DTL-24231, and other referenced specifications, with stringent requirements for material traceability, chemical and mechanical certification, and non-destructive testing. All components must be traceable from raw material through final assembly via unique heat-lot markings, and certifications must be 100% verified, positive, and unqualified, with no disclaimers permitted. Certain parts, including hull penetrators and receptacle bodies made from QQ-N-286 alloy, require specific heat treatments, chemical analysis, and destructive testing to validate compliance, with testing restricted to approved laboratories for slow strain rate tensile tests. The contract mandates comprehensive First Article Testing, both contractor-performed and government-performed, with the contractor required to submit one cable specimen for destructive testing and one complete assembly to Portsmouth Naval Shipyard for government evaluation. Quality assurance is rigorously enforced under ISO-9001, with full Government inspection at source and mandatory submission of documented quality procedures, welding qualifications, and test reports via the ECDS system. All welds, brazing, and material modifications require prior approval, and repairs on QQ-N-286 material are strictly prohibited. The contractor must maintain full configuration control, submit Engineering Change Proposals for any modifications, and comply with Buy American and Defense Priorities and Allocations System (DPAS) requirements, as this is a DO-rated order for national defense use. Delivery of all material must be completed within 365 days of contract award, with certification data submitted 20 days prior to each delivery, and the entire product line is subject to zero-defect acceptance criteria during final inspection.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

IEM/MMM TACTICL EHFThis contract pertains to the procurement of specialized hull-penetrating assemblies for critical naval shipboard systems, where failure could result in catastrophic loss of life, vessel, or mission-critical capabilities. All materials, particularly those made from QQ-N-286 and SAE AMS 5666, must meet exacting chemical and mechanical specifications, with mandatory traceability from raw material through final assembly via unique heat-lot markings. Every component requires comprehensive certification including tensile, hardness, hydrostatic pressure, electrical, and ultrasonic testing, with results documented in Objective Quality Evidence (OQE) reports that must be electronically signed and traceable to individual items. The delivery schedule mandates submission of certification data at least 20 days prior to shipment, with final delivery due within 365 days of contract initiation. All materials are designated as SPECIAL EMPHASIS Level I, requiring 100% inspection of traceability, certifications, and test records, with zero-defect acceptance criteria for lot inspection. The contractor must maintain ISO-9001 or MIL-I-45208 quality systems, with documented procedures for welding, brazing, and material handling, and must submit all weld procedures and qualifications for Navy approval prior to production. Repair welding is prohibited on QQ-N-286, and thread lubricants containing molybdenum disulfide are strictly forbidden, with A-A-59004 anti-galling compound required instead. All certification documentation must be submitted via the Wide Area Work Flow (WAWF) system to Portsmouth Naval Shipyard using DODAAC N50286, with notification sent to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL, and no shipment is permitted without formal acceptance. The contract is issued under Emergency Acquisition Flexibilities and is rated DO under the Defense Priorities and Allocations System, requiring strict adherence to Buy American and small business subcontracting requirements. Configuration control is tightly enforced, with any deviation or waiver requiring formal review and approval by the Contracting Officer, and all engineering changes must be submitted as Class I or II ECPs with full-life cycle impact analysis. Government source inspection is required at all production sites, including subcontractors, and all subcontracted work must carry forward the full quality and traceability requirements. Electronic signatures are accepted in place of handwritten ones, provided they are secured, auditable, and controlled per strict standards, and all foreign certifications must include US unit conversions signed by an authorized representative.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

LA IEM TACTICAL EHFThis contract pertains to the procurement of a Hull Penetrating Assembly designated as SPECIAL EMPHASIS material (Level I, Quality Assured) for use in a critical shipboard system, where failure could result in catastrophic consequences including loss of life or the vessel itself. The material must strictly comply with LaBarge Inc. drawing 7-21740 and associated specifications, with detailed requirements for chemical and mechanical properties, particularly for components made from QQ-N-286 material and SAE AMS 5666 bar stock. Certification of all critical materials, welds, and tests is mandatory, including tensile, hardness, hydrostatic, electrical, and ultrasonic inspections, with results traceable to unique heat lot numbers and permanently marked on each component. All test and certification data must be submitted electronically via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard prior to shipment, with inspection and acceptance authority vested in N39040 and shipping directed to N50286. The contract mandates 100% inspection of traceability, certification documents, and nondestructive test results, and enforces zero defect tolerance during final lot acceptance. A comprehensive quality assurance regime is established, requiring the contractor to maintain an ISO-9001 or MIL-I-45208 compliant quality system, with calibration standards aligned to ISO-10012 or ANSI-Z540.3 and ISO/IEC 17025. Government Quality Assurance representatives retain full rights to inspect at source, including subcontractor facilities, and all sub-tier suppliers must adhere to the same traceability, certification, and documentation standards. Welding and brazing procedures require formal approval prior to execution, and repair welding on QQ-N-286 is prohibited; all weld filler metals must be certified and traceable. Electronic signatures are accepted on certifications provided they are uniquely tied to authorized individuals and documents cannot be altered post-signature. The contractor must ensure material traceability from raw stock through all manufacturing and subcontracting steps, with strict segregation, marking, and documentation controls. Mercury and molybdenum disulfide are prohibited, and anti-galling compound A-A-59004 must be used for threads. The contract is issued under Emergency Acquisition Flexibilities, holds a “DO” priority rating under the Defense Priorities and Allocations System, and is subject toBuy American and Small Business Subcontracting Plan requirements, with all deviations or waivers requiring

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

POWER SUPPLYThis contract pertains to the repair of a POWER SUPPLY under a fixed-price arrangement, with all work required to meet strict technical and quality standards defined by military specifications. The contractor must perform teardown and evaluation of received carcasses within 90 days and submit a firm-fixed price quote that includes all associated costs such as handling damaged or incomplete units, missing hardware, repair labor, and CAV reporting. The repair must adhere to approved contractor procedures, drawings, and technical orders tied to the specified CAGE code 0KPC5 and reference number CCHA41186-1. Items must be marked in accordance with MIL-STD-130 Rev N and packaged per MIL-STD-2073. Any design, material, or part number changes require prior written approval from the contracting officer and must be classified under one of six defined code categories. The award is subject to Defense Priorities and Allocations System (DPAS) certification and is issued under Emergency Acquisition Flexibilities. The contract mandates full compliance with Buy American provisions, cybersecurity maturity model requirements, and small business set-aside conditions, with the offeror required to provide a small business subcontracting plan. Electronic submission and acceptance of proposals are binding upon receipt, and non-original equipment manufacturers must submit authorization letters from the OEM. All inspection records must be maintained for 365 days post-delivery. The point of contact for inquiries is James E. Lewis, reachable via email and phone, with responses due by August 10, 2026. The requirement is administered by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, PA, under solicitation number N0010426QND66, and all contractual documents are deemed officially issued upon electronic transmission. The repair price must reflect estimated costs for the entire repair effort, including new part cost for evaluation, and any deviations from solicitation requirements must be explicitly stated; otherwise, the award will strictly follow the stated terms.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Terminal Lugs Supply for Electrical InfrastructureNashville Electric Service is seeking qualified suppliers to provide standardized terminal lugs designed for #4/0 stranded copper conductors used in utility-scale electrical distribution systems. The lugs must fully comply with NEMA standards and be manufactured by approved vendors to ensure reliability and compatibility with existing infrastructure. This subcontract opportunity is open for bids with a response deadline of July 29, 2026, and the solicitation was posted on July 24, 2026. The work is to be performed in Nashville, with delivery expected to support ongoing electrical distribution projects in the region. Interested parties must submit proposals through the designated vendor portal at the provided link, and only manufacturers meeting the specified technical and compliance criteria will be considered for award.

Nashville Electric Service

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Packaging, Preservation & Marking ServicesThe contract mandates the packaging, preservation, and marking of machine screws in strict compliance with military standards, specifically employing Dry Method 33 and MIL-STD-2073-1E to ensure environmental protection and long-term preservation during storage and transit. All items must be palletized according to RP001 specifications and shipped using traceable methods to maintain supply chain integrity and accountability. The work is classified as a subcontract under NAICS code 493190, administered by the ASC Commodities Division within the Department of Defense, with all activities subject to rigorous military logistics protocols. Responses are due by July 31, 2026, and the performance location is not specified, but adherence to federal defense packaging and shipping regulations is non-negotiable.

Other Warehousing and Storage

POSTED

about 14 hours ago

DEADLINE

Prohibited Substances Compliance (Hexavalent Chromium, PFAS)The contract requires compliance with Department of Defense clauses 252.223-7008 and 252.223-7009, mandating a thorough audit of manufacturing processes and supply chain operations to verify the absence of hexavalent chromium and PFAS-based firefighting agents. All subcontractors must demonstrate robust systems to prevent the introduction or use of these prohibited substances at any stage of production or sourcing, with documented evidence of testing, vendor certifications, and process controls to ensure ongoing compliance. Failure to meet these requirements will result in noncompliance and potential contract termination. The solicitation is classified as a subcontract under NAICS code 541690, and the award will be managed by the ASC Commodities Division within the Department of Defense. Responses are due by July 31, 2026, with the posting date of July 25, 2026, indicating a tight six-day window for submissions. There is no set-aside designation, and performance location details are not specified, implying the work may be conducted across multiple facilities. Interested parties must access the full solicitation through the provided DIBBS link to review all technical and administrative requirements before submitting proposals.

Other Scientific and Technical Consulting Services

POSTED

about 14 hours ago

DEADLINE

Radioactive Materials Notification & MarkingThe contract requires the performance of radiological testing to identify materials with radioactive content exceeding specified thresholds, ensuring compliance with military standards for detection and response. All affected items must be properly marked in accordance with MIL-STD-129, which governs labeling and marking procedures for military shipments. Prior notification to the Contracting Officer is mandatory before any testing or marking activities commence, providing the government with opportunity to review and approve procedures. The work falls under NAICS code 541380, indicating it involves scientific and technical consulting services, and is classified as a subcontract under the Department of Defense’s ASC Commodities Division. The solicitation was posted on July 25, 2026, with responses due by July 31, 2026, and performance is expected to occur without a specified geographic location, though the work is tied to defense logistics and supply chain compliance.

Testing Laboratories and Services

POSTED

about 14 hours ago

DEADLINE

Hazardous Materials Compliance & LabelingThe contract titled Hazardous Materials Compliance & Labeling requires adherence to the OSHA Hazard Communication Standard for all hazardous materials involved in manufacturing or packaging operations. This includes ensuring proper labeling of containers and the accurate preparation and maintenance of Material Safety Data Sheets to communicate risks and safety measures to personnel. The work is structured as a subcontract under NAICS code 541690 and is issued by the ASC COMMODITIES DIVISION under the Department of Defense. The solicitation was posted on July 25, 2026, with a response deadline of July 31, 2026, and no set-aside designation is specified. Performance location details are not provided, and the point of contact information is unavailable, though the full solicitation can be accessed through the DIBBS system at the provided link.

Other Scientific and Technical Consulting Services

POSTED

about 14 hours ago

DEADLINE

Precision Machined Screw ManufacturingThe contract requires the manufacture of machine screws identified by NSN 5305-01-723-0482, strictly adhering to the technical specifications set by the Defense Logistics Agency. All production must comply with MIL-STD-2073-1E for packaging and preservation, alongside DLA’s rigorous quality standards, ensuring consistency and reliability for military applications. Full supply chain traceability is mandatory, requiring detailed documentation from raw material sourcing through final inspection and delivery to verify authenticity and conformance at every stage. This is a subcontract opportunity under the North American Industry Classification System code 332722, issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 25, 2026, with proposals due by July 31, 2026. While no specific place of performance or point of contact is provided, the contract mandates adherence to federal defense procurement protocols and expects suppliers to demonstrate proven capability in high-precision machining and quality control systems compliant with military requirements. All submissions must be made through the DIBBS portal as indicated by the provided link.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

Cybersecurity Compliance (CMMC Level 2) SupportThis contract supports the Cybersecurity Maturity Model Certification (CMMC) Level 2 compliance process for organizations handling Covered Defense Information, focusing on self-assessment, System Security Plan development, and full implementation of all NIST SP 800-171 security controls. The effort is geared toward ensuring that the contractor meets the required standards for protecting federal contract information and maintaining compliance with Department of Defense cybersecurity mandates. All activities must align with the framework established by CMMC to prepare for and pass third-party assessments. The contract is categorized as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to respond, and it is governed under NAICS code 541512 for computer systems design services. The solicitation was posted on July 25, 2026, with a response deadline of August 8, 2026, and the performing organization falls under the ASC Commodities Division of the Department of Defense. Performance location details are unspecified, but the work will involve supporting the agency’s cybersecurity readiness across its operations through tailored compliance services and documentation.

Computer Systems Design Services

POSTED

about 14 hours ago

DEADLINE

Supply Chain Traceability and Obsolescence ManagementThe contract titled Supply Chain Traceability and Obsolescence Management is a small business set-aside subcontract issued by the Department of Defense through the ASC Commodities Division, with a NAICS code of 541611 for management consulting services. It requires the contractor to manage component traceability, maintain comprehensive supply chain documentation, and deliver timely obsolescence reporting in full compliance with Defense Logistics Agency standards for defense procurement. The work is critical to ensuring the integrity and sustainability of defense supply chains by tracking parts through their lifecycle and proactively identifying components at risk of obsolescence. The solicitation was posted on July 25, 2026, and responses are due by August 8, 2026. This contract is specifically reserved for total small business participation, as defined under the Small Business Administration’s guidelines, and is available through the DIBBS procurement platform. Although no specific place of performance or point of contact is provided, the nature of the work implies nationwide or global engagement to support defense logistics operations, with the expectation that the contractor will integrate closely with federal supply chain systems and maintain rigorous compliance with DLA directives.

Administrative Management and General Management Consulting Services

POSTED

about 14 hours ago

DEADLINE

Quality Assurance and Sampling Inspection ServicesThis contract requires the performance of quality assurance and sampling inspection services under MIL-STD-1916 or ASQ H1331 Table 1, with a strict zero tolerance policy for any non-conformances on critical, major, and minor attributes. The work involves rigorous inspection protocols to ensure every product meets exacting standards without exception, targeting high-stakes components where even minor deviations are unacceptable. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, reinforcing the intent to support small business participation in defense-related quality initiatives. The NAICS code 541330 indicates the primary focus is on scientific and technical consulting services, specifically quality control and inspection activities, and the contracting activity is under the ASC Commodities Division of the Department of Defense. The opportunity was posted on July 25, 2026, with a response deadline of August 8, 2026, providing a two-week window for qualified small businesses to submit proposals. While no specific place of performance or point of contact is detailed in the provided data, the work is tied to a Defense Logistics Agency procurement platform, suggesting inspections will support the broader DOD supply chain. The absence of an office address or zip code implies that the location of performance may be flexible or determined by the nature of the subcontracted materials being inspected, potentially across multiple facilities or contractor sites under the DOD’s control. The requirement underscores the critical importance of precision and compliance in defense-related quality assurance, where failure to meet zero tolerance standards could compromise operational readiness and safety.

Engineering Services

POSTED

about 14 hours ago

DEADLINE

Packaging, Palletization, and Marking ServicesThe contract requires comprehensive packaging, labeling, palletization, and shipment documentation services for cable assemblies, strictly adhering to MIL-STD-129 and DLA RP001 standards to ensure military-grade compliance. All work must meet exacting specifications for marking, identification, and handling to support secure and traceable logistics across defense supply chains, with particular emphasis on accurate labeling and proper pallet configuration to facilitate efficient receipt and inventory management by military distribution centers. This is a total small business set-aside under the SBA program, exclusively open to small business concerns as defined by the Small Business Administration, and is classified under NAICS code 493190, which pertains to other warehousing and storage. The solicitation was posted on July 25, 2026, with responses due by August 8, 2026, and is managed by the ASC Commodities Division of the Department of Defense. Performance is expected to be carried out in alignment with federal contracting guidelines, though the specific place of performance has not been designated. Interested parties must submit proposals via the designated DIBBS portal to be considered for award.

Other Warehousing and Storage

POSTED

about 14 hours ago

DEADLINE

Special-Purpose Electrical Cable Assembly ManufacturingThe contract calls for the manufacture and delivery of 10 units of a special-purpose electrical cable assembly identified by NSN 5995-01-478-5081, with all work required to meet the technical and quality standards established by the Defense Logistics Agency. The effort is structured as a small business set-aside under the SBA program, ensuring eligibility is restricted to small businesses as defined by FAR 19.5, and the NAICS code 335929 applies to this procurement. The solicitation was posted on July 25, 2026, with responses due by August 8, 2026, providing a two-week window for proposals. The contracting activity is managed by the ASC Commodities Division under the Department of Defense, and although specific performance location and contact details are not provided, the work is expected to align with DLA’s operational requirements. Interested parties must submit proposals through the designated DIBBS portal prior to the deadline to be considered.

Other Communication and Energy Wire Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply Chain Traceability and Documentation ManagementThe contract titled Supply Chain Traceability and Documentation Management requires full oversight and management of supply chain traceability records, material certifications, and compliance documentation in alignment with Defense Logistics Agency standards. This subcontract is set aside entirely for small businesses under the SBA Total Small Business Set-Aside program, with a NAICS code of 541611 indicating it pertains to management consulting services. The work is to be performed under the ASC Commodities Division of the Department of Defense, focusing on ensuring end-to-end documentation integrity for critical supply chain components. The solicitation was posted on July 25, 2026, with responses due by August 8, 2026. While specific performance locations and point of contact details are not provided, the requirement emphasizes strict adherence to DLA compliance frameworks, necessitating robust systems for capturing, maintaining, and verifying material provenance and regulatory certifications. This effort supports defense logistics integrity and must be executed by a small business entity capable of handling sensitive, high-volume documentation with precision and audit readiness.

Administrative Management and General Management Consulting Services

POSTED

about 14 hours ago

DEADLINE

Military Marking, Labeling, and UID ComplianceThis contract requires permanent marking, barcode and RFID labeling services fully compliant with MIL-STD-129 and RQ017 standards, including specialized FAT labeling protocols to meet rigorous military identification requirements. The work must ensure each item is uniquely identified, traceable, and properly labeled using approved methods and materials to support logistics, inventory, and asset management across Department of Defense supply chains. All labeling activities must adhere to strict technical specifications for durability, readability, and data accuracy under operational conditions. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 323111 indicating it pertains to printing and related support activities. It is managed by the ASC Commodities Division of the Department of Defense and has a response deadline of August 8, 2026. The place of performance and point of contact details are not specified, but the work is expected to support federal military logistics infrastructure with no geographic restrictions indicated. Interested parties must submit proposals through the DIBBS portal before the deadline to be considered.

Commercial Printing (except Screen and Books)

POSTED

about 14 hours ago

DEADLINE