Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PRESSURE HYD, AIRCRA

Active
SPE4A7-26-T-592XFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a Commercial Off-the-Shelf (COTS) hydraulic pressure component for aircraft, identified by NSN 1680-01-585-4775 and part number 1225P6-2, with a quantity of four units. Delivery is required within 93 days of the order, with FOB Origin terms, and final delivery addressed to the DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance occur at origin, with the government retaining final authority over acceptance based on sampling inspections conducted in accordance with MIL-STD-1916 or ASQ H1331 Table 1; zero non-conformances are required unless otherwise specified. Unspecified attributes are treated as major, with corresponding AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor characteristics, and MIL-STD-105/ASQ Z1.4 may be used for sample size determination only. The item is exempt from Unique Item Identification per DFARS 252.211-7003(c)(1)(i), but all packaging and labeling must conform to MIL-STD-129 and ASTM D3951, with DLA Master List requirements superseding all other standards. Palletization must follow RP001: DLA Packaging Requirements for Procurement. The contractor must maintain a quality system compliant with SAE AS9003 or ISO 9001 tailored to AS9003 and comply with CMMC Level 2 self-assessment requirements. Hazardous materials must be labeled under OSHA’s Hazard Communication Standard and referenced statutes, with MSDS submissions required prior to award. All deliveries must be reported via WAWF, and the contract includes clauses for combating trafficking, employment eligibility, sustainable products, cybersecurity safeguarding, changes, subcontracting, whistleblower rights, and unauthorized obligations. Pricing details are incomplete, with unit and total prices not provided. The acquisition is subject to the FAR and DFARS, with deviations applied to multiple clauses, and the solicitation was issued under NAICS 336413 through the DLA via DIBBS, with responses due by August 5, 2026.

General Info

Four COTS hydraulic components delivered FOB origin by Dec 22, 2026 at $4 each, per DLA and MIL-STD requirements.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE4A7-26-T-592X

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
TSAONE TLALE
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PRESSURE HYD,AIRCRA
PRESSURE HYD,AIRCRA
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
SPE4A7-26-T-592X
SECTION B
THE BOEING COMPANY 81205 P/N 1225P6-2
ITT AEROSPACE CONTROLS LLC 98087 P/N 1225P6-2
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017593430 0001 EA 4.000
NSN/MATERIAL:1680015854775
DELIVERY (IN DAYS):0093
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
SPE4A7-26-T-592X
SECTION B
PR: 7017593430 PRLI: 0001 CONT’D
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:00/00/0000 Original Required Delivery Date:12/22/2026
SPE4A7-26-T-592X NSN/Part Number: 1680-01-585-4775 Quantity: 4 EA Purchase Request: 7017593430QTY: 4 Delivery: 93 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
Small Business Subcontracting ParticipationCertified small businesses including WOSB, SDVOSB, and HUBZone concerns are invited to participate as subcontractors under a total small business set-aside prime contract managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. This opportunity is specifically aligned with NAICS code 336413, which pertains to aerospace product and parts manufacturing, and encompasses potential roles in manufacturing, testing, or logistics functions. The solicitation is structured to ensure full small business participation as mandated by the Small Business Administration under FAR 19.5, and interested entities must respond by the deadline of August 28, 2026. Opportunities are available to qualified small businesses supporting defense-related supply chain activities, with all work expected to be performed under the prime contract awarded to a certified small business concern. Participation is only open to entities that meet SBA certification requirements and can demonstrate capability in the specified technical areas.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 27 days
View Details
NAICS: 336413
New
DIBBS
Wing Panel Manufacturing and AssemblyThe contract titled Wing Panel Manufacturing and Assembly pertains to the production and delivery of PANEL, WING units under strict adherence to technical specifications, material certifications, and CAGE/part number requirements, ensuring full compliance with defense industry standards. It is structured as a subcontract and falls under a Total Small Business Set-Aside designation, reserved exclusively for small businesses as defined by the Small Business Administration, with the NAICS code 336413 identifying it within the Aircraft and Aircraft Parts Manufacturing sector. The solicitation was posted on July 31, 2026, with responses due by August 28, 2026, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, though specific location details for performance or contact information are not provided. All deliverables must meet rigorous quality and traceability criteria aligned with federal procurement protocols.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 27 days
View Details
NAICS: 336413
New
DIBBS
HEAD, LINEAR ACTUATI
Solicitation # SPE4A7-26-T-376S
The procurement is for four units of NSN 1650007395602, HEAD, LINEAR ACTUATI, to be delivered to the DLA Distribution Depot Hill within 171 days after award. The only approved source for this item is vendor 70236 with part number 9-1038-3. This solicitation, numbered SPE4A726T376S, is an RFQ issued under NAICS code 336413 by the Department of Defense through DLA Aviation, with the office located in Richmond, Virginia. All responsible suppliers may submit quotes electronically, and no hard copies of the solicitation are available. Specifications, plans, or drawings are not provided, and quotes must be received by the deadline of May 27, 2026. Questions should be directed via email to the point of contact listed, with additional details accessible through the SAM.gov link or the DIBBS solicitation portal using the solicitation number.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
STATOR TUBE, TORQUE,
Solicitation # SPE4A7-26-Q-0947
The contract pertains to the procurement of ten STATOR TUBE, TORQUE units with NSN 1630-01-673-8451 under solicitation SPE4A7-26-Q-0947, issued by the Department of Defense through DLA. The item is subject to strict technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, with compliance mandatory. Cybersecurity measures require adherence to CMMC Level 2 self-assessment standards, and all supplies must meet DLA packaging requirements per RP001, including compliance with MIL-STD-2073-1E for preservation, packaging, and marking in accordance with MIL-STD-129, with no special marking codes applied. Physical identification and bare item marking must follow RQ017 guidelines, and government identification must be removed from any non-accepted supplies under RQ011. The contract specifies a Firm Fixed Price with zero variance allowed on quantity, and delivery is required within 236 days after contract award, with FOB origin and inspection and acceptance occurring at destination. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs as designated. The supplier must adhere to SAFRAN LANDING SYSTEMS part number GA32187-2 specifications. Shipping instructions direct delivery to DLA Distribution in Jacksonville, Florida, and transportation procedures follow DLAD Proc Note C19 and C20. The government has designated a material need date of February 17, 2027, and the contract is classified under NAICS code 336413 with no set-aside type.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336413
New
DIBBS
PANEL, WING
Solicitation # SPE4A7-26-R-0670
The contract is for one unit of a PANEL, WING with a delivery requirement of 780 days after award, under solicitation SPE4A7-26-R-0670, which is a total small business set-aside under NAICS code 336413. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on procurement size. Cybersecurity compliance requires CMMC Level 2 certification through a certified third-party assessment organization. The item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons anywhere in the world, and access is restricted to contractors with approved JCP certification, completion of DOD export control training, and DLA authorization. Physical identification of the item is required per RQ017, but item unique identification is waived per customer request, with DFARS 252.211-7003(c)(1)(i) applying. Inspection and acceptance occur at origin, and government identification must be removed from non-accepted supplies. Packaging must meet DLA standards, and all technical data handling follows strict export control protocols as outlined in DFARS 252.225-7048. The contract is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with Ryan Loeffelholz as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 27 days
View Details
NAICS: 336413
New
DIBBS
LIGHT, NAVIGATIONAL, AIR
Solicitation # SPE4A5-26-Q-0660
This contract is for the procurement of two units of a light, navigational aircraft component identified by NSN 6220-01-454-3041 and part number 30-2443-2 from Grimes Aerospace Company. The item is classified as a critical safety item and a commercial product of a type, subject to stringent quality oversight including SAE AS9100 requirements for manufacturers and non-manufacturers. All supplies must comply with MIL-STD-129 marking standards, including lot and serial numbers, contractor and manufacturer CAGE codes, and part numbers, with special fragile labeling. Unit packaging and palletization must adhere to MIL-STD-2073-1E and DLA packaging requirements, with no government identification removed from non-accepted items. Inspection and acceptance occur at origin, with firm fixed pricing and zero variance allowed in quantity. Delivery is due 333 days after order date, with FOB origin terms, and freight is directed to the DLA Distribution facility in New Cumberland, Pennsylvania. Cybersecurity requirements include CMMC Level 2 self-assessment, and all deviations or waivers require formal approval from the DSC Contracting Officer. Technical and quality requirements are drawn from the DLA Master List, with documentation tied to QAP-106 Revision B dated July 9, 2012, and the item is not subject to Item Unique Identification per Service customer request.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336413
New
DIBBS
HOUSING, AIR OUTLET,
Solicitation # SPE4A5-26-T-306Q
The contract pertains to the procurement of one unit of a housing, air outlet, identified by NSN 1660016656502 and part number 189386-2, under solicitation SPE4A5-26-T-306Q, issued by the Department of Defense’s ASC Supplier Oper OEM Division. Delivery is required 169 days after award, with a need ship date of January 17, 2027, and an original delivery target of February 13, 2028, to Tinker Air Force Base, Oklahoma, under FOB Destination terms. The item is exempt from Item Unique Identification per DFARS 252.211-7003(c)(1)(i), but must be physically marked per RQ017 and packaged in compliance with ASTM D3951, with all packaging and labeling requirements superseded by the DLA Master List of Technical and Quality Requirements and governed by MIL-STD-129, including precise palletization under RP001. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with unspecified attributes treated as major and acceptance criteria demanding zero non-conformances unless stated otherwise; accelerated life testing at 105% of rated voltage is an approved alternative to standard testing. The contractor must comply with CMMC Level 2 self-assessment requirements and adhere to NIST SP 800-171 DOD assessment mandates, with hazardous materials properly labeled per 29 CFR 1910.1200 and reported prior to award. Inspection and acceptance occur at the destination, performed by government personnel, with contract performance governed by FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment eligibility, sustainable products, cybersecurity, subcontracting, safety notifications, and transportation. Payment processing is required via WAWF, with no unit price or total value disclosed in the solicitation. The contract includes mandatory representations regarding small business status, unique entity identifier, and covered defense telecommunications equipment, all to be certified by the offeror. All technical and quality specifications referenced in the DLA Master List override industry standards, and the supply must conform to all applicable packaging, marking, environmental, and cybersecurity obligations outlined in the solicitation.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
PANEL, STRUCTURAL, AI
Solicitation # SPE4A5-26-T-308G
The contract covers the procurement of a single structural panel, identified by NSN 1560016882236 and part number 113T1617Y103, for use in critical aerospace applications under The Boeing Company. The item is subject to stringent technical, quality, and regulatory requirements, including compliance with the DLA Master List of Technical and Quality Requirements, FAA airworthiness standards for certified parts, and configuration change management protocols. Packaging and preservation must adhere strictly to MIL-STD-2073-1E with preservation method 10, no preservation material, and packaging code U, while marking must conform to MIL-STD-129 without special markings. Palletization follows DLA Packaging Requirements for Procurement, and shipment must utilize traceable freight methods—parcel post is prohibited. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or a comparable zero-based plan, requiring zero non-conformances unless otherwise specified. Item Unique Identification is not required per the service customer’s request. Delivery is due within five days of order, FOB origin, to McConnell AFB, KS, with required dates of July 15 and July 21, 2026, depending on the line item. The contract includes multiple clauses under FAR and DFARS addressing cybersecurity, hazardous materials, export controls, trafficking in persons, employment eligibility, and supplier diversity, with numerous deviations authorized through formal deviation numbers. All pricing information is omitted, and no total contract value is provided, though three separate CLINs each specify one unit to be delivered. Invoicing must be processed via Wide Area WorkFlow, and contractors must comply with NIST SP 800-171 for safeguarding covered defense information, with cyber incidents requiring reporting within 72 hours. Prohibitions on hexavalent chromium, covered defense telecommunications equipment, and Communist Chinese Military Companies apply, and the contractor must ensure compliance with all applicable hazardous materials reporting and handling standards. Supply chain traceability documentation must be retained per DLA Procurement Note C03, and the contractor is responsible for full compliance with FAA airworthiness approval requirements, including the submission of a Certificate of Airworthiness and Conformance.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
SHAFT ASSEMBLY, ACTU
Solicitation # SPE4A5-26-T-307M
The contract solicitation SPE4A5-26-T-307M is for the procurement of one unit of a shaft assembly, actuator, identified by NSN 1680010118060 and part number AA8586 from Simmonds Precision Products Inc. The item is classified as a critical application item and must be delivered 172 days after receipt of order, with an original required delivery date of February 1, 2027, and a need ship date of February 1, 2026. Delivery is FOB origin and acceptance occurs at the destination facility, specifically the DDSP New Cumberland Facility in New Cumberland, Pennsylvania. The contractor must comply with stringent packaging and marking requirements per ASTM D3951 and MIL-STD-129, including barcoding with Data Matrix and UCC-128 labels, and palletization in accordance with DLA Packaging Requirements RP001. All packaging and labeling must adhere to the DLA Master List of Technical and Quality Requirements, which supersedes ASTM D3951 where applicable. Inspection and acceptance criteria mandate zero nonconformances in sampling, using MIL-STD-1916 or ASQ H1331 Table 1 with specified verification levels and AQLs for critical, major, and minor attributes; unspecified attributes default to major level. The item must be physically marked per RQ017, and government identification must be removed from non-accepted supplies per RQ011. Invoicing must be conducted electronically via Wide Area WorkFlow. The contract includes numerous Federal Acquisition Regulation clauses addressing cybersecurity, trafficking in persons, employment eligibility, sustainable products, hazardous material handling, safeguarding of covered defense information, changes, and subcontracting, all applied under Deviation 2026-00038 or 2026-O0025 as appropriate. Compliance with prohibitions on covered defense telecommunications equipment and hexavalent chromium is mandatory, and the contractor must affirm its small business status, UEI, and CAGE code, with additional reporting triggered if covered equipment is provided. The contracting officer has not specified the contract type, pricing, or evaluation factors, leaving offerors to submit competitive proposals under an undefined acquisition strategy. All submissions must be made through the DLA Internet Bid Board System by the response deadline of August 5, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
SENSOR ASSY, SKIN TE
Solicitation # SPE4A5-26-T-307L
The contract pertains to the procurement of a SENSOR ASSY, SKIN TEMPERATURE, identified by NSN 1680007929233 and part number 969-0032-001, with a total quantity of 67 units to be delivered FOB origin to Tinker Air Force Base, Oklahoma, within 133 days of the award, with inspection and acceptance occurring at the destination. The item is classified as a commercial item, and the procurement is structured as a total small business set-aside under NAICS code 336413. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951, and contractors must comply with specific requirements such as RQ017 for bare item marking, RQ011 for removal of government identification from non-accepted items, and RT001 for measuring and test equipment. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required for acceptance unless otherwise specified; attributes are classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must meet DLA Packaging Requirements for Procurement, with all UoI and QUP as contractually defined. Cybersecurity compliance requires a CMMC Level 2 self-assessment and adherence to NIST SP 800-171 DOD assessment requirements, while safeguarding of covered contractor information systems is mandatory under applicable clauses. Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i). The contract includes clauses on equal opportunity, combating human trafficking, employment eligibility verification, sustainable products, hazardous material identification, and accelerated payments to small business subcontractors, with multiple deviations applied. Invoicing must be processed electronically through Wide Area WorkFlow, and delivery must be to the designated DLA Distribution Depot Oklahoma address. The contract does not specify option quantities or a formal contract type, and pricing information for the identified line item is listed at $67.00 per unit, though additional PRLIs with higher unit costs appear in partial data without full context.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
SHAFT ASSEMBLY, ACTU
Solicitation # SPE4A5-26-T-9432
The contract specifies the procurement of a Shaft Assembly, Actuator with NSN 1680010118060 and part number AA8586, manufactured by Simmonds Precision Products Inc, under solicitation SPE4A5-26-T-9432. Four units are required at a fixed quantity with zero variance, to be delivered FOB origin within 27 days of contract award, with delivery scheduled for April 13, 2027. Inspection and acceptance occur at the destination, and all items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling strictly following government specifications. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are subject to the most stringent verification levels. The supplier must manage configuration changes through formal Engineering Change Proposals and ensure all non-accepted supplies are properly de-identified per RQ011. All technical, quality, and packaging directives, including those identified by R or I numbers, are binding and must be referenced from the official DLA eProcurement portal. The item is classified as a Critical Application Item, and delivery must be sent to the designated DLA distribution facility in New Cumberland, Pennsylvania, with transportation details governed by DLAD Proc Notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
ADAPTER KIT
Solicitation # SPE4A7-26-T-519U
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 334332
New
DIBBS
Small Business Subcontracting Participation (Opportunity for DBE/MBE/WBE)This opportunity is designed to facilitate participation by certified small businesses, including 8(a), HUBZone, WOSB, and SDVOSB entities, in supply, packaging, and quality assurance roles under a prime contractor’s FAR 52.219-9 subcontracting plan. The solicitation targets organizations eligible for small business set-asides and aims to integrate them into the supply chain for defense-related activities managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. The North American Industry Classification System code 334332 indicates the focus is on electronic component and board manufacturing, suggesting subcontracting needs related to production, testing, and logistics support within this sector. The deadline for responses is August 31, 2026, with the opportunity posted on July 31, 2026, allowing prospective bidders a one-month window to prepare and submit their proposals. While no specific place of performance or point of contact is listed, the contract is accessible through the DIBBS portal, and participation is contingent upon meeting certified small business status and aligning with the prime contractor’s subcontracting goals. There is no mention of a monetary value or specific contract duration, but the structure implies a framework for ongoing or long-term subcontracting engagement rather than a single project. Certified firms are encouraged to engage through the provided link to secure a role in this defense supply chain initiative.

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
DIBBS
Quality Assurance and Inspection Services (Sub-tier Support)The contract entails providing independent quality assurance and inspection services as a sub-tier support to ensure compliance with DLA and MIL-STD standards across multiple stages of manufacturing and delivery. Key responsibilities include conducting first article inspections to validate initial production samples, performing in-process checks to maintain consistent quality during production, and executing final acceptance testing to confirm that end products meet all technical and performance specifications. Additionally, the contractor is required to review all associated documentation for accuracy and completeness and to systematically track, report, and manage non-conformances to ensure timely resolution and prevent recurrence. The work must be executed with precision and adherence to federal defense procurement standards, ensuring that all deliverables are traceable, auditable, and fully compliant with applicable military specifications. This subcontract is issued under NAICS code 541330 and is associated with the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 31, 2026, with responses due by August 31, 2026. Although specific location details and point of contact information are not provided, performance is expected to align with the needs of the defense supply chain, likely involving coordination with prime contractors and defense manufacturing facilities. Participation requires demonstrated expertise in military quality systems and the ability to operate independently within a highly regulated environment, ensuring that all inspection and assurance activities support mission-critical defense outcomes.
Engineering Services

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 493190
New
DIBBS
Specialized Packaging and Marking ServicesThe contract involves specialized packaging and marking services for finished cable assemblies, requiring strict adherence to MIL-STD-2073-1E for packaging standards and MIL-STD-129 for labeling requirements. All packaging must include barcodes, CAGE codes, lot and serial numbers, and proper FOB origin coordination to ensure full compliance with military logistics protocols. The work is classified as a subcontract under NAICS code 493190 and is solicited by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on July 31, 2026, with a response deadline of August 31, 2026, and performance will be conducted in accordance with federal defense supply chain expectations, though specific performance location details are not provided. Interested parties must submit proposals through the designated DIBBS portal prior to the deadline.
Other Warehousing and Storage

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332420
New
DIBBS
Wire Rope and Cable Conduit SupplyThe contract specifies the supply of high-strength, naturally coiling wire rope and protective conduit engineered to endure a minimum tension of 552 lbs, ensuring durability and reliability under demanding operational conditions. All components must comply with MIL-STD-2073-1E packaging standards, guaranteeing secure, standardized handling, storage, and transportation throughout the supply chain. The work is classified as a subcontract under NAICS code 332420, indicating the manufacturing of wire and cable, and is issued by the Department of Defense through its ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 31, 2026, with responses due by August 31, 2026, allowing interested parties sufficient time to prepare and submit proposals. Performance location and point of contact details are not specified, and the procurement is accessible via the DIBBS platform for further information and submissions.
Metal Tank (Heavy Gauge) Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334332
New
DIBBS
Precision Connector and Receptacle SupplyThe contract calls for the supply of high-reliability, MIL-SPEC compliant electrical connectors and receptacles equipped with protective caps, intended for integration into control cable assemblies. All components must be certified as free from counterfeit parts and must adhere strictly to military specification standards to ensure performance under demanding operational conditions. The products are critical to defense systems requiring robust electrical connectivity and must be manufactured with traceable materials and processes to maintain integrity throughout the supply chain. This is a subcontract opportunity issued under NAICS code 334332 by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 31, 2026. The requirement emphasizes compliance with defense-grade quality controls and demands rigorous documentation to verify conformance to specifications. While the place of performance and point of contact details are unspecified, the procurement is managed through the DIBBS system, indicating formal defense procurement protocols are in effect. Suppliers must demonstrate proven capability in producing MIL-SPEC components and maintaining strict anti-counterfeit measures to qualify.

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335931
New
DIBBS
Cable Assembly Manufacturing and TestingThe contract calls for the full production of control cable assemblies designated as P/N 2600930-001, encompassing all manufacturing steps from wire rope coiling to the secure attachment of connectors, followed by rigorous tension testing at 552 pounds and final inspection. All work must strictly adhere to MIL-STD-1916 and ASQ H1331 quality standards, with an absolute requirement of zero non-conformance tolerance across the entire production batch. This is a subcontract within the Department of Defense procurement framework under NAICS code 335931, initiated by the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 31, 2026, and the solicitation posted on July 31, 2026. Production and delivery must meet exacting military specifications to ensure reliability and performance under operational conditions.
Current-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 493190
New
DIBBS
Packaging, Marking, and Logistics for DeliveryThe contract requires the packaging and marking of wing panels in strict accordance with MIL-STD-129 standards, ensuring all items are properly labeled with 2D Data Matrix barcodes and clearly identified by NSN and part number. Logistics preparation must align with FOB Origin and Destination requirements to facilitate seamless delivery and tracking throughout the supply chain. The work is categorized as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns are eligible to respond, as defined by the SBA and FAR 19.5. The North American Industry Classification System code 493190 indicates the work falls under Other Transportation Support Activities, reflecting the focus on logistics and packaging support rather than manufacturing. The solicitation is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV with a response deadline of August 28, 2026, and was posted on July 31, 2026, providing interested parties approximately four weeks to prepare and submit proposals.
Other Warehousing and Storage

POSTED

about 14 hours ago

DEADLINE

in 27 days
View Details
NAICS: 541330
New
DIBBS
Government First Article Testing (FAT) SupportThis contract supports Government-conducted Factory Acceptance Testing for up to two units, requiring the contractor to ensure full site access, provide comprehensive documentation, and deliver test-ready units ready for evaluation. The effort is tied to the Government’s First Article Testing process and demands coordination to meet all technical and procedural requirements necessary for successful FAT execution. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to respond. The North American Industry Classification System code 541330 designates the scope as engineering services, aligning with technical support and testing services for defense-related systems. The contract was posted on July 31, 2026, with a response deadline of August 28, 2026, and is administered by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV. The place of performance and point of contact details are not specified, indicating potential flexibility or site-specific arrangements to be determined post-award.
Engineering Services

POSTED

about 14 hours ago

DEADLINE

in 27 days
View Details
New
DIBBS
Unable to Retrieve Subcontract OpportunitiesA system error prevented the retrieval of subcontractor and supplier opportunities associated with the prime contract, making it impossible to break down actionable sub-opportunities. The solicitation, posted on July 31, 2026, with a response deadline of August 31, 2026, is categorized as a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER AE AND AF DIV. No solicitation number, NAICS code, set-aside details, organizational type, or physical address information is available, and the point of contact is undefined. The place of performance and other location data are also omitted, leaving critical details incomplete. The only identifiable reference is the online link to the DIBBS portal where the original posting exists, but without sufficient data to evaluate or pursue potential sub-contracting avenues.

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332999
New
DIBBS
High-Reliability Component Supply (Item 0001-S00000061)The contract entails the supply of a high-reliability component designated as Item Number 0001-S00000061, with stringent requirements for quality assurance, comprehensive documentation, and full compliance with military standards. The component must meet exacting technical and performance specifications to ensure operational readiness and durability under demanding conditions, typical of defense applications. All deliverables must be accompanied by certified test reports, material certifications, and traceability records to validate conformance to applicable military and industry specifications. This is a subcontract awarded under the NAICS code 332999, classified as an Other Miscellaneous Manufacturing category, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on July 31, 2026, with a firm response deadline of August 31, 2026, allowing suppliers a one-month window to submit proposals. The place of performance and specific point of contact details are not provided, but the contract is accessible through the DIBBS system at the specified URL, and all offerors are expected to adhere to federal procurement regulations and defense-specific supply chain protocols without set-aside restrictions.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details