Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Preventative Generator Maintenance Inspections

Active

State & Local

Response Deadline12/31/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The State of Rhode Island is seeking a subcontractor for Preventative Generator Maintenance Inspections under NAICS code 811211. The scope of work involves performing semi-annual and annual preventative maintenance inspections on emergency generators to ensure operational readiness. Key technical requirements include conducting fluid checks, battery testing, and operational verification in strict compliance with NFPA standards. This opportunity was posted on July 7, 2025, with a response deadline set for December 31, 2026. Interested parties can find further details and bidding information through the Rhode Island Division of Procurement portal.

General Info

Rhode Island seeks subcontractors for NFPA compliant preventative emergency generator maintenance inspections.

Agency

State of Rhode Island

NAICS

811211 - Consumer Electronics Repair and Maintenance

Place of Performance

RI, USA

Set-Aside

NONE

Documents

This scope was carved out of OEV26005752.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

MPA 550 Generator Installation, Maintenance, and Repairs

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 7

subcontract

Response DeadlineDec 31

Submission deadline

Response Deadline

12/31/2026, 08:00:00 PM UTCin 2 months

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyState of Rhode Island

ContactsNo contacts available

OfficeN/A

Organization / AgencyState of Rhode Island

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform semi-annual and annual preventative maintenance inspections on emergency generators, including fluid checks, battery testing, and NFPA-compliant operational verification.

Similar Contracts

Same NAICS industry code

Electrical Chassis Repair ServicesThis subcontract for Electrical Chassis Repair Services involves the refurbishment of Electrical Chassises with NIIN O15262273 for prime contractors supporting NAVSUP Weapon Systems Support projects. The selected provider will execute repairs in strict accordance with Technical Data Package Version O01 and specifications provided by the Naval Surface Warfare Center or DODSSP. The scope of work requires the use of specialized electrical refurbishment tools and full support for Government Source Inspection to ensure the final delivered product is properly repaired and inspected. Managed under NAICS code 811211 for the Department of Defense, this opportunity was posted on October 27, 2026, with a response deadline of October 30, 2026. The primary objective is the delivery of fully functional, inspected electrical chassis units that meet all government technical standards.

Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

Medical Equipment Installation and MaintenanceThis subcontract for Medical Equipment Installation and Maintenance supports prime contractors on Department of Veterans Affairs medical laboratory projects in Tampa, Florida. The scope of work involves the delivery, installation, and continuous technical maintenance of laboratory hardware, including user-defined calibration and both hardware and software upgrades. All technical services must be performed by manufacturer-certified technicians to ensure compliance and operational efficiency. The contractor is responsible for providing all installed equipment and submitting detailed calibration reports. Additionally, the agreement requires the management of equipment removal and return shipping upon the conclusion of the contract. This effort falls under NAICS code 811211 and is managed through the Network Contract Office 8.

248-NETWORK Contract Office 8 (36C248)

POSTED

about 21 hours ago

DEADLINE

Primary Engineering Control (PEC) CertificationThis subcontract opportunity is for the Primary Engineering Control certification of Biological Safety Cabinets and Laminar Airflow Workstations at VA Medical Center projects. The selected provider will perform critical performance evaluations and certifications to ensure sterile environment requirements are met, utilizing NIST-traceable airflow velocity testers and particle counters. All work must be conducted in accordance with USP 797, USP 800, and CETA CAG-003-2006 standards, with final deliverables consisting of detailed PEC Certification reports. Managed by the Department of Veterans Affairs Network Contract Office 9, this project is specifically set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 811211. To ensure technical compliance and safety, the contract mandates that all personnel performing the certifications hold CETA/CNBT certification. Interested parties must respond by October 28, 2026.

249-NETWORK Contract Office 9 (36C249)

POSTED

DEADLINE

in about 10 hours

Cable System Maintenance and Repair ServicesThe Cable System Maintenance and Repair Services subcontract involves providing technical support, troubleshooting, and hardware replacement for prime contractors at the Robinson Correctional Center in Illinois. The selected provider is responsible for dispatching technicians within 24 to 48 hours of a reported service problem and ensuring that replacement parts are installed and services are restored within a 48-hour window using specialized signal testing equipment. To maintain facility security, all technicians must successfully pass comprehensive background checks. Additionally, the contractor is required to deliver detailed maintenance logs and repair records upon the completion of each service call. This opportunity falls under NAICS code 811211, with a response deadline set for November 3, 2026.

ROBINSONCC426 - Robinson Correctional Center

POSTED

DEADLINE

Training Aid Weapon Technician/SupplierThis subcontract opportunity with the Department of National Defence involves the supply, maintenance, and repair of training aid weapons for prime contractors on simulator projects. The selected provider will be responsible for performing first-echelon repair work, managing the custody and care of compressed air systems, and supplying necessary spare parts and compressed air chargers to ensure a functioning inventory. To be eligible, the contractor must possess Secret security clearance and be registered with the Controlled Goods Program. The contract is categorized under NAICS code 811211 and is based in Canada, with a response deadline set for November 10, 2026.

Department of National Defence

POSTED

DEADLINE

Dental Suite Equipment Maintenance and CalibrationThe Dental Suite Equipment Maintenance and Calibration subcontract involves providing preventative maintenance, repair, and calibration services for prime contractors working on Department of Public Health projects at Western Massachusetts Hospital. The scope of work focuses on the routine inspection and safety calibration of X-ray machines and dental chairs using specialized diagnostic tools to ensure all equipment is fully maintained and certified. Qualified providers must hold manufacturer-specific certifications or be a Certified Biomedical Equipment Technician. This opportunity is categorized under NAICS code 811211, with performance taking place in Boston, Massachusetts. Interested parties must submit their responses by the deadline of November 30, 2026.

WMH001 - Western Massachusetts Hospital

POSTED

DEADLINE

in about 1 month

Post-Warranty Service and Maintenance (Years 2-3)This subcontract focuses on providing post-warranty service and maintenance for the QuantStudio 5 Dx instrument supporting Tarrant County laboratory projects. The scope of work includes performing scheduled preventative maintenance, corrective repairs, troubleshooting, and ongoing qualification checks to ensure maximum instrument uptime and valid qualification status. All services must be executed by a Certified Field Service Engineer using original equipment manufacturer replacement parts. The opportunity is categorized under NAICS code 811211 and is managed by Tarrant County in Texas. Interested parties should note that the posting date is October 16, 2026, with a response deadline set for November 5, 2026. This contract specifically covers the second and third years of the post-warranty service period.

POSTED

DEADLINE

QuantStudio 5 Dx Installation and Qualification ServicesThis subcontract for Tarrant County in Texas involves the physical installation, network integration, and technical qualification of the QuantStudio 5 Dx genetic analysis instrument. The scope of work includes executing account and security configurations, verifying connectivity with Diomni software, and completing all necessary maintenance qualification procedures to ensure the instrument is fully operational. To fulfill these requirements, the project mandates the use of a Certified Field Service Engineer specifically qualified for the QuantStudio 5 Dx. The contract was posted on October 16, 2026, with a response deadline of November 5, 2026, falling under NAICS code 811211.

POSTED

DEADLINE

MH-139 Ni-Cad Battery Maintenance SpecialistThis subcontract opportunity is for a MH-139 Ni-Cad Battery Maintenance Specialist to support prime contractors on Department of Defense projects at F. E. Warren AFB. The selected provider will be responsible for the comprehensive readiness management of Nickel-Cadmium batteries, including storage, inspection, fluid leveling, discharging, charging, and testing. All work must be performed using Christie RF80-M analyzers in strict accordance with OEM standards, AFOSH compliance, and USAF T.O. 00-20-1 regulations. The contractor is required to provide certified personnel to deliver fully serviced and certified batteries along with all necessary AFTO/DD documentation. This is a total small business set-aside under NAICS code 811211. Interested parties must submit their responses by October 29, 2026, for performance located in zip code 82001.

FA4613 90 Cons Pk

POSTED

DEADLINE

Sensy Sampling and Analysis Technical ServicesThe Sensy Sampling and Analysis Technical Services subcontract involves providing specialized sampling and analysis services for prime contractors operating on New York Power Authority projects at the Charles Poletti Power Project. The scope of work focuses on the technical analysis of samples, system calibration, and performance verification specifically utilizing Sensy sampling and analysis systems. To ensure operational standards, personnel are required to possess technical certification and training specific to Sensy equipment. Key deliverables for this engagement include the submission of detailed analysis reports, the provision of calibrated systems, and the maintenance of technical service logs. This opportunity is categorized under NAICS code 811211 and is associated with the Power Authority of New York. Interested parties should note the response deadline of November 3, 2026.

Power Authority of New York

POSTED

DEADLINE

Liquid-Filled Power Transformer Repair and RewindingThis subcontract involves the core technical refurbishment of a Square D Schneider Electric liquid-filled power transformer for prime contractors working on City of Hayward Water Resource Recovery Facility projects. The scope of work includes the removal of old windings and insulation, the installation of new components, and the completion of internal bus connection work. To ensure operational integrity, the contractor must conduct comprehensive shop testing, including winding-resistance, insulation-resistance, power-factor, and dielectric-strength tests, to verify an impedance of 5.67%. The final deliverable is a fully refurbished transformer unit to be performed in Hayward, California.

City of Hayward

POSTED

DEADLINE

in about 10 hours

Battery Charger Repair and Functional RestorationThis subcontract involves the teardown, evaluation, repair, and modification of battery chargers for prime contractors supporting Navsup Weapon Systems Support Mech projects. The contractor is responsible for delivering 15 fully repaired and functional battery chargers under NSN 6130-01-158-5195, ensuring all work adheres to technical orders, drawings, and the specific requirements of CAGE Code 072E5 and Reference Number 1657613-100. Compliance is mandatory with MIL-STD-130, REV N for marking and all applicable CMMC standards. The project falls under NAICS code 811211 and is managed through the Department of Defense. The response deadline for this opportunity is November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

More opportunities from State of Rhode Island

Same awarding agency

Plumbing and Heating Parts SupplierThis subcontract opportunity with the State of Rhode Island involves the supply of commercial grade plumbing fixtures, pipes, valves, and heating system components to prime contractors working on Rhode Island College projects. The selected supplier is responsible for delivering all materials directly to the college site and must maintain authorized distributor status for specific manufacturers to ensure quality and compliance. Pricing for the provided parts is based on the manufacturer's list price minus a predetermined percentage discount. Interested parties must submit their responses by December 2, 2026, at 4:30 PM. This procurement falls under NAICS code 423720 and is managed through the Rhode Island Department of Procurement.

Plumbing and Heating Equipment and Supplies (Hydronics) Merchant Wholesalers

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Water Main Booster Pump Preventative MaintenanceThis subcontract opportunity with the State of Rhode Island involves providing quarterly preventative maintenance for eight water main booster pumps at Rhode Island College facility projects. The selected contractor will be responsible for utilizing specialized lubricants and pump diagnostic tools to test and optimize performance, ensuring all booster pumps remain fully operational. Qualified bidders must hold a valid plumbing or mechanical license to perform the work. Key deliverables include the submission of quarterly maintenance logs. Interested parties should note the response deadline of December 2, 2026, and can find further details through the Rhode Island Division of Procurement.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Private Gas Main Inspection and OperationThis subcontract through the State of Rhode Island involves the annual inspection, maintenance, and operation of private gas mains for prime contractors working on Rhode Island College facility projects. The selected provider will be responsible for gas leak detection and general infrastructure oversight to ensure full compliance with PUC regulations and state statutes. To qualify for this engagement, the provider must hold an NGA certified operator's certificate. Key deliverables include the submission of annual inspection reports and the formal certification of the operational status of the gas mains. Interested parties must respond by December 2, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Master Plumbing Repair and MaintenanceThis subcontract opportunity, titled Master Plumbing Repair and Maintenance, involves providing general plumbing repairs and maintenance for heating and plumbing systems at Rhode Island College facility projects. The selected contractor will work under prime contractors to deliver regular and overtime labor for on-site repairs utilizing standard commercial plumbing tools to ensure overall system functionality. Managed by the State of Rhode Island under NAICS code 238220, this contract requires the provider to hold a valid Master Plumber license. Interested parties must submit their responses by the deadline of December 2, 2026, at 4:30 PM. Further details and bidding opportunities can be accessed through the Rhode Island Division of Procurement website.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 16 hours ago

DEADLINE

in about 1 month

RIC PLUMBING SERVICES

Solicitation # RFQ27007102

Rhode Island College is soliciting a vendor to provide comprehensive plumbing services from December 1, 2026, through November 30, 2029. The scope of work includes the maintenance and repair of heating and plumbing systems, requiring the vendor to furnish all necessary labor, equipment, tools, and materials. Key deliverables include the quarterly preventative maintenance of eight water main booster pumps and the annual inspection, maintenance, and operation of the college's private gas mains. To be eligible for award, vendors must provide proof of a Pipefitter class 1 license, a hoisting license, and a Northeast Gas Association certified operator's certificate. Bidders must submit unit pricing for regular and overtime repair labor, preventative maintenance, and equipment operator and truck driver rates. While equipment rates are required for informational purposes, they are not part of the overall evaluation. All repair and equipment labor must comply with Rhode Island general law 37-13-1 regarding public works prevailing wage rates, although preventative maintenance is exempt from these requirements.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 16 hours ago

DEADLINE

in about 1 month

RI DEM Mobile Emergency Operations Center (MEOC)

Solicitation # RFP27007067

POSTED

about 16 hours ago

DEADLINE

MPA 603 LITERACY AND DYSLEXIA ENDORSEMENT PROVIDERS

Solicitation # OEV27007095

POSTED

about 18 hours ago

DEADLINE

Quality Assurance Reporting & DocumentationThis subcontract opportunity with the State of Rhode Island focuses on Quality Assurance Reporting and Documentation for OER renewable energy projects. The selected contractor will be responsible for drafting and finalizing both interim and final quality assurance reports for prime contractors, utilizing technical writing and reporting software to synthesize inspection findings into cohesive documents. Qualified candidates must possess a technical writing background or a QA certification to perform these duties. The primary deliverables for this engagement are the completed interim and final Quality Assurance Reports. Interested parties should note the response deadline of November 19, 2026.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Customer Feedback & Data AnalysisThis subcontract opportunity with the State of Rhode Island focuses on the design and deployment of customer satisfaction surveys for homeowners utilizing small-scale PV systems on OER renewable energy projects. The selected provider will be responsible for creating survey instruments, distributing them to the target population, and utilizing data analysis software such as Qualtrics or SurveyMonkey to process feedback. The final deliverable for this engagement is a comprehensive customer feedback summary report. Qualified candidates must possess specialized expertise in market research or data analysis. Interested parties should note that the response deadline is November 19, 2026, at 4:30 PM. This project falls under NAICS code 541613 and is managed through the Rhode Island state procurement system.

Marketing Consulting Services

POSTED

DEADLINE

Specialized Renewable Technology Inspections (Wind, Hydro, AD)This subcontract opportunity with the State of Rhode Island seeks expert inspection services for non-solar renewable technologies on OER renewable energy projects. The selected provider will support prime contractors by conducting detailed inspections of wind projects ranging from 3MW to 5MW, hydropower projects of 1MW, and anaerobic digester projects of 1MW. These evaluations must be performed using technology-specific diagnostic tools to ensure operational integrity and compliance. Qualified candidates must possess specialized engineering certifications tailored to wind, hydro, or biogas systems. The primary deliverable for this engagement is the production of comprehensive site inspection reports for each specific technology encountered. Interested parties should note the response deadline of November 19, 2026, and refer to the Rhode Island Division of Procurement for further submission details.

Engineering Services

POSTED

DEADLINE

PV & Energy Storage System (ESS) InspectionsThis subcontract with the State of Rhode Island involves performing specialized inspections of small-scale photovoltaic systems integrated with energy storage battery systems for prime contractors on OER renewable energy projects. The scope of work focuses on evaluating the integration between the PV array and storage systems through the use of dedicated battery storage testing and safety equipment. Qualified providers must hold the necessary electrical licenses and NABCEP certifications to perform these services. The primary deliverables for this engagement include a comprehensive PV and energy storage inspection report along with a sampling memo section.

Engineering Services

POSTED

DEADLINE

Commercial & Utility-Scale Solar PV InspectionsThis subcontract with the State of Rhode Island involves performing complex field inspections and audits for large-scale solar PV projects ranging from 251kW to over 3MW. The selected provider will work for prime contractors on OER renewable energy projects to verify engineering layouts, interconnection, and NEC compliance for systems of various capacities using industrial electrical testing tools. The primary deliverable for these services is the production of detailed site inspection reports. Qualified candidates must possess a Professional Engineering license, relevant electrical licenses, and NABCEP certifications. This opportunity falls under NAICS code 541330 and was posted on October 26, 2026, with a response deadline of November 19, 2026.

Engineering Services

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Warranty and Technical Support Services

City of Bartlett

POSTED

over 1 year ago

CLOSED

over 1 year ago

HUB and Small Business Subcontracting Participation

North Carolina Department of Public Safety

POSTED

over 1 year ago

CLOSED

over 1 year ago

Emergency Generator Repair Services

City of Waxahachie

POSTED

over 1 year ago

CLOSED

over 1 year ago

Major Maintenance for Large Generators

City of Waxahachie

POSTED

over 1 year ago

CLOSED

over 1 year ago

Major Maintenance for Medium Generators

City of Waxahachie

POSTED

over 1 year ago

CLOSED

over 1 year ago

Major Maintenance for Small Generators

City of Waxahachie

POSTED

over 1 year ago

CLOSED

over 1 year ago

Preventative Maintenance for Large Generators

City of Waxahachie

POSTED

over 1 year ago

CLOSED

over 1 year ago

Preventative Maintenance for Medium Generators

City of Waxahachie

POSTED

over 1 year ago

CLOSED

over 1 year ago

Preventative Maintenance for Small Generators

City of Waxahachie

POSTED

over 1 year ago

CLOSED

over 1 year ago

Local Preference & Small Business Outreach Coordination

City of New Haven

POSTED

over 1 year ago

CLOSED

over 1 year ago

Advertising Graphic Repair Services

POSTED

over 1 year ago

CLOSED

about 1 year ago

Minivan and Truck Advertising Wrap Installation

POSTED

over 1 year ago

CLOSED

about 1 year ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS