Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Printed Flexible Cable Assembly Supplier

Open

Federal

Response Deadline11/16/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of eight printed flexible cable assemblies, specifically identified by NSN 5995-01-358-7463, to support prime contractors fulfilling DLA supply contracts. The work is managed under the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament, with the place of performance located at Robins Air Force Base. The supplier is responsible for manufacturing or sourcing the assemblies while adhering to strict quality and packaging standards. Quality sampling must be performed according to MIL-STD-1916, ASQ H1331 Table 1, or equivalent zero-based sampling plans, and all deliveries must comply with DLA Packaging Requirements RP001. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

General Info

Supply eight printed flexible cable assemblies for DLA at Robins Air Force Base.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) Manufacturing

Place of Performance

ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L4-27-T-0945.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CABLE ASSEMBLY, PRINTED

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 12:00:00 PM ESTin 10 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies printed flexible cable assemblies for prime contractors delivering DLA supply contracts. Manufactures or sources the specific assembly identified by NSN 5995-01-358-7463. Performs quality sampling per MIL-STD-1916, ASQ H1331 Table 1, or comparable zero-based sampling plans. Adheres to DLA Packaging Requirements (RP001). Delivers 8 units of the printed flexible cable assembly.

Similar Contracts

Same NAICS industry code

Quick Release Pin SupplierThis subcontract involves the supply of 43 specialized quick-release pins, identified by NSN 5315-015-33818-8, to support prime contractors delivering for the Department of Defense under the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing these pins in strict accordance with the technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements. All items must be packaged according to RP001 DLA Packaging Requirements and delivered to the designated DLA destination in San Diego, California. The procurement falls under NAICS code 334418, with a response deadline set for November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Electrical Power Cable Assembly SupplyThis subcontract involves the supply of two specialized electrical power cable assemblies, specifically NSN 6150015902141 and L3 Technologies part number 60085525+000. The contract supports prime contractors delivering for the Department of Defense under the DLA Weapons Support ASC Commodities Division. All deliverables must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking requirements. The project falls under NAICS code 334418 and specifies New Cumberland as the place of performance. Interested parties must note the response deadline of November 13, 2026, following the posting date of November 6, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Specialized Cable Assembly Production (NSN 5995017172227)This subcontract involves the manufacture and supply of one specialized Cable Assembly, identified by NSN 5995017172227, for prime contractors supporting Department of Defense supply contracts. The production must strictly adhere to Basic Drawing NR 19207 12613498 Rev A, as well as Reference Drawings NR 19207 12420957 Rev D and NR 19207 12608579 Rev A, in accordance with TDP Rev A Gen 2 requirements. Managed by the DLA Weapons Support Aviation Supply Chain ESOC Buys, the contract falls under NAICS code 334418 and requires full compliance with DFARS covered defense telecommunications prohibitions. The place of performance is located in Little Falls, Minnesota. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 10 hours ago

DEADLINE

Manufacture and Supply of Blind Rivets (PN 11438039-15)This subcontract involves the manufacture and supply of 50 blind rivets, part number 11438039-15, for prime contractors supporting DLA Weapons Support ASC projects. The rivets must be fabricated according to reference drawing 18876 11438039 Revision AE using precision machining and forming equipment. Quality assurance requires the implementation of zero-based sampling in accordance with MIL-STD-1916 or ASQ H1331, with final products packaged per MIL-STD-2073-1E and marked per MIL-STD-129. The contractor must maintain several critical certifications and security standards, including the US/Canada Joint Certification Program, CMMC Level 2, and DFARS 252.204-7012 compliance. This Department of Defense requirement is categorized under NAICS code 334418, with the place of performance located in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Manufacture and Supply of Straight Tube-to-Boss AdaptersThis subcontract involves the manufacture and supply of 1,812 straight tube-to-boss adapter assemblies for the DLA Weapons Support Nuclear Reactor Program. The scope of work includes the fabrication of fitting bodies, nuts, and sleeves designated as Critical Application Items, utilizing precision machining to ensure compliance with NSN 4730004115597. All deliverables must be marked and packaged in accordance with MIL-STD-129 and MIL-STD-2073-1E standards. The project is categorized under NAICS code 334418 and will be performed in New Cumberland. Interested parties must respond by November 16, 2026, to support prime contractors delivering these essential components to the Department of Defense.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 10 hours ago

DEADLINE

Supply of Straight, Headless Pins (Critical Application)This subcontract involves the supply of 47 units of straight, headless pins for prime contractors supporting DLA supply contracts. The items must meet the technical requirements for part number 82402098 and comply with specifications from approved manufacturers, specifically Transaero, Inc. or Ontic Engineering. Due to the critical application of these components, they must be produced with high-precision tolerances and include full material certifications. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, with the place of performance located in Cherry Point. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026. The procurement falls under NAICS code 334418.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Supply of Drain Cocks (NSN 4820012485052)This subcontract involves the manufacture or sourcing of 26 units of drain cock hardware meeting NSN 4820012485052 specifications for prime contractors supporting the DLA Weapons Support Fluid Handling Division of the Department of Defense. The contractor is responsible for ensuring all items are packaged and palletized according to MIL-STD-2073-1E and RP001 standards, with all shipments marked in compliance with MIL-STD-129. The performance of this contract will take place in Bremerton, Washington. Interested parties must respond by November 16, 2026, regarding this requirement categorized under NAICS code 334418.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 10 hours ago

DEADLINE

Annular Ball Bearing SupplyThis subcontract involves the supply of 20 annular ball bearings, identified by NSN 3110015316865, for prime contractors working on DLA Weapons Support procurement projects. The bearings must strictly adhere to Configuration Control Item standards to ensure technical compliance. All units are to be delivered to the Defense Logistics Agency in Jacksonville, Florida. The contract mandates rigorous logistics and handling protocols, requiring packaging according to MIL-STD-2073-1E and marking in accordance with MIL-STD-129. Additionally, all shipments must be palletized following RP001 DLA Packaging Requirements. This procurement is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Supply of MIL-DTL-38999 Electrical Plug ConnectorsThis subcontract involves the manufacture or distribution of six electrical plug connectors, specifically part number D38999/26FE6PN, for prime contractors working with the Department of Defense DLA Weapons Support Active Devices Division. The components must strictly adhere to MIL-DTL-38999N Revision N and MIL-DTL-38999/26G Revision G specifications. To qualify, the provider must hold QPL/QML certification for Federal Stock Class 5935. Additionally, all deliverables must comply with MIL-STD-129 and RP001 packaging standards. The opportunity is categorized under NAICS code 334418, with a response deadline set for November 20, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 10 hours ago

DEADLINE

Manufacturing and Supply of Nonmetallic Hose AssembliesThis subcontract, issued by the Department of Defense for the DLA Weapons Support Fluid Handling Division, requires the fabrication and supply of 172 nonmetallic hose assemblies. The contractor must manufacture these assemblies according to NSN 4720-01-495-7466 and the DLA Master List of Technical and Quality Requirements, with a strict prohibition on the use of additive manufacturing. All finished products must be marked per MIL-STD-129 and packaged according to ASTM D3951 for delivery to DLA Distribution centers. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334418, with the place of performance located in New Cumberland. Interested parties must respond by November 16, 2026, to provide these essential components to prime contractors supporting the agency.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 10 hours ago

DEADLINE

Printed Circuit Board (PCB) Fabrication and AssemblyThis subcontract opportunity is for the fabrication and assembly of populated printed circuit boards to support prime contractors on DLA Weapons Support ASC projects. The scope of work includes multi-layer PCB fabrication, SMT assembly, and through-hole soldering of signal processing components, all performed according to strict aerospace standards. The final deliverables consist of fully populated and tested PCB assemblies. The contract is issued by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division and is designated as a Total Small Business Set-Aside. Qualified bidders must maintain ISO 9001 certification and ITAR registration. The place of performance is located in New Cumberland, Pennsylvania, with a response deadline set for November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Flexible Cable Assembly IntegrationThe Flexible Cable Assembly Integration subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the assembly, soldering, and termination of flexible printed cable assemblies. The selected contractor will be responsible for populating flexible circuits with components and terminating connectors specifically to meet Part Number 75652A-00 specifications. Key technical requirements include precision soldering and rigorous signal integrity testing to ensure the delivery of fully tested and completed assemblies. To be eligible for this project, contractors must have a CMMC Level 2 self-assessment. The work is categorized under NAICS code 334418 and will be performed in New Cumberland. Interested parties should note the response deadline of November 13, 2026, for this specialized manufacturing effort supporting prime contractors on DLA projects.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging, preservation, and marking services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support LSO Combat Vehicles and Armament. The scope of work requires the packaging of three units in strict accordance with MIL-STD-2073-1E using preservation material 49 and wrap material GB, with labeling performed per MIL-STD-129. The project is designated as a FOB Origin shipment destined for DLA Distribution DDSP New Cumberland. Interested parties should note the response deadline of November 16, 2026, and the associated NAICS code 488510 for these specialized logistics and packaging services.

Freight Transportation Arrangement

POSTED

about 10 hours ago

DEADLINE

Rotary Gear Operator FabricationThis subcontract involves the fabrication of three Rotary Gear Operator assemblies for prime contractors supporting the DLA Weapons Support LSO Combat Vehicles and Armament projects. The scope of work requires precision CNC machining and assembly of NSN 3020-01-697-0150 components, ensuring strict adherence to the DLA Master List of Technical and Quality Requirements. To maintain regulatory compliance, the manufacturer must use high-grade alloys that meet the standards of the Buy American Act and the Berry Amendment. Additionally, the contractor is required to maintain DFARS 252.204-7012 cybersecurity compliance. Performance of the contract will take place in New Cumberland, Pennsylvania.

Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 10 hours ago

DEADLINE

Quality Assurance Representative (QAR) Support/InspectionThis subcontract opportunity is for Quality Assurance Representative support and inspection services benefiting the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament. The selected provider will perform specialized quality inspections and verifications for prime contractors, specifically focusing on critical gun parts and military-grade gun mounts. Work is conducted at the manufacturer's facility using precision measurement tools to ensure all unique requirements are met prior to formal acceptance or rejection. All activities must adhere strictly to DLA and DoD Quality Assurance Representative standards, culminating in the delivery of detailed inspection reports. The place of performance is located in Fort Campbell, Kentucky. Interested parties should note the response deadline of November 16, 2026, for this effort categorized under NAICS code 541380.

Testing Laboratories and Services

POSTED

about 10 hours ago

DEADLINE

Manufacturing of Critical Gun Mount (NSN 1005016806244)This subcontract involves the manufacture and supply of a specialized Gun Mount, identified by NSN 1005016806244, for prime contractors supporting DLA Weapons Support projects. The selected provider is responsible for fabricating one high-precision mount using specialized tooling and materials to ensure strict adherence to military specifications and unique requirements for critical gun parts. The project is managed under the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament, with performance taking place at Fort Campbell. A critical requirement of the contract is that the finished product must successfully pass a Quality Assurance Representative inspection at the manufacturer's facility prior to delivery.

Ball and Roller Bearing Manufacturing

POSTED

about 10 hours ago

DEADLINE

Specialized Metal Tubing SupplyThis subcontract involves the supply of specialized raw metal tubing for prime contractors supporting DLA Weapons Support projects under the Department of Defense. The provider is responsible for sourcing and delivering metal stock that adheres to BAE Systems P/N 12364539 material grades, ensuring all deliveries are made to the manufacturer. A critical requirement of the agreement is the provision of full material traceability and Mill Test Reports to verify quality. Additionally, all supplied materials must strictly comply with the Buy American Act and the Berry Amendment. Performance for this contract is centered in New Cumberland.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 10 hours ago

DEADLINE

Precision Metal Tube Assembly ManufacturingThis subcontract involves the fabrication and assembly of 28 precision metal tube assemblies for the Department of Defense, specifically supporting DLA Weapons Support projects. The scope of work requires precision cutting, bending, and joining of components to meet BAE Systems specifications for NSN 4710-01-437-2299. All deliverables must adhere to Critical Application Item standards and comply with DFARS 252.204-7012 regulations. The project mandates strict adherence to MIL-STD-2073-1E and MIL-STD-129 for the packaging and marking of all items. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332312. The response deadline for this requirement is November 16, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of Vehicular Safety Belts (NSN 2540-01-566242-1)This subcontract involves the manufacture and supply of 29 vehicular safety belts, identified by NSN 2540-01-566242-1, for prime contractors supporting DLA supply contracts. These components are designated as Critical Application Items and must strictly adhere to RP001 DLA Packaging Requirements for Procurement. The contract is managed under the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament. The agreement specifies that finished products are to be delivered FOB Origin with destination inspection, with the place of performance located in Tracy, California. Operating under NAICS code 336390, the contract requires the delivery of all 29 units to meet the specific safety and procurement standards mandated by the agency.

Other Motor Vehicle Parts Manufacturing

POSTED

about 10 hours ago

DEADLINE

Precision Bearing Supply for Spur GearThis subcontract involves the sourcing and delivery of high-precision bearings for prime contractors supporting DLA Weapons Support contracts. The bearings must be compatible with Rockwell Collins and Universal Propulsion Company specifications for integration into Spur Gear P/N D115087-501 and must strictly adhere to standards for Critical Application Items. The selected provider will deliver these components directly to the gear manufacturer for final assembly. Managed by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament, the contract falls under NAICS code 333611. Performance will take place at Hill AFB, zip code 84056-5734. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 10 hours ago

DEADLINE

Spur Gear and Bearing Assembly SupplyThis subcontract involves the manufacture and supply of two specialized Spur Gear assemblies, including integrated bearings, for prime contractors supporting the DLA Weapons Support LSO Combat Vehicles and Armament. The deliverables must strictly adhere to the specifications for Part Number D115087-501 and NSN 3020015484321, utilizing high-grade alloys and precision gear cutting and grinding equipment. Due to the nature of the components, all assemblies must meet the rigorous quality standards required for Critical Application Items. The project is categorized under NAICS code 333511 and is managed by the Department of Defense. Performance of the contract will take place at Hill AFB, zip code 84056-5734. Interested parties must respond by the deadline of November 16, 2026, following the posting date of November 6, 2026.

Industrial Mold Manufacturing

POSTED

about 10 hours ago

DEADLINE

Automotive Axle Shaft SupplyThis subcontract, issued by the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament, requires the manufacture or sourcing of 131 automotive axle shafts under NSN 2520016966857. The selected provider must ensure that each unit and its associated parts are individually packaged for delivery to Texarkana. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 336310. To be eligible for award, contractors must be registered in the System for Award Management and Wide Area Workflow, possessing a valid Unique Entity Identifier and CAGE code. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 10 hours ago

DEADLINE

First Article Test (FAT) ValidationThis subcontract involves providing technical testing and validation services for prime contractors under DLA supply contracts, specifically managed by the Department of Defense agency DLA Weapons Support LSO Combat Vehicles and Armament. The primary objective is to conduct First Article Testing to ensure that armor meets rigorous fragmentation and small arms resistance standards. These evaluations are performed using specialized ballistic testing ranges and fragmentation simulation equipment. The selected provider is responsible for delivering comprehensive test reports and validation data that adhere to DLA portal technical standards, culminating in the delivery of the FAT Certification. The work is designated under NAICS code 541380 and is to be performed in New Cumberland. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

Testing Laboratories and Services

POSTED

about 10 hours ago

DEADLINE

Supplemental Armor (Small Arms-Fragmentation) SupplyThis subcontract involves the manufacture or procurement of supplemental armor designed to protect against small arms and fragmentation, specifically meeting the specifications for NSN 2540016049317. The contractor is responsible for delivering 15 finished units to a designated Defense Logistics Agency location, with performance taking place in New Cumberland. The project is managed under the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament. Strict adherence to domestic material restrictions is required, ensuring full compliance with the Berry Amendment and the Buy American Act.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 10 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Circuit Card Assembly Fabrication and Assembly

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

Supply of Electrical Connector Backshells

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 10 hours ago

DEADLINE

Hexagon Head Cap Screw Supply

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Electrical Insulation Sleeving Supplier

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Valve Assembly, Manifold Supplier

RED RIVER RECEIVING BLDG

POSTED

about 10 hours ago

DEADLINE

Test Set Subassembly (Hazard Detecting Equipment) Supplier

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Fixed Attenuator Supply

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 10 hours ago

DEADLINE

ARM, SWITCH ACTUATOR

Solicitation # SPE7M2-27-T-0767

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 10 hours ago

DEADLINE

ELECTRONIC MODULE, STAN

Solicitation # SPE7M5-27-T-2472

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 10 hours ago

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M5-27-T-2637

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 10 hours ago

DEADLINE

ELECTRONIC MODULE, STAN

Solicitation # SPE7M5-27-T-2546

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 10 hours ago

DEADLINE

ELECTRONIC COMPONENTS

Solicitation # SPE7M1-27-T-2268

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS