PRINTED WIRING BOARD

PRINTED WIRING BOARD
PRINTED WIRING BOARD
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Bell Standard 160-027 located the following information for the four items: 1. 160-027-121, Microcircuit, Driver, SNJ54ABT162244WD, NSN
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. 5962-01-520-4953 (CAGE 01295) 2. 160-027-122, Microcircuit, Trasceiver, SNJ54ABT162245WD, NSN 5962-01-625-4033 (CAGE 01295) 3. 160-027-123, Microcircuit, Latch, SNJ54ABT16373AWD, NSN 5962-01-625-2551 (CAGE 01295)
4. 160-027-261, Connector, KA80.1/127CPMC101TH, No NSN, (CAGE 50541, Hypertronics Corp) Be advised this connector is available from authorized distributor Kensington Electronics Inc. (CAGE 0HUB3), (512) 339-3300. RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
CRITICAL APPLICATION ITEM
PROJECTS UNLIMITED INC 04597 P/N 901-005-656-103 BELL TEXTRON INC 97499 P/N 901-005-656-103
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
SPE7M1-26-U-6347
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000244097 0001 EA 9.000
This is an estimated quantity and may not be purchased by the IDC.
NSN/MATERIAL:5998015304716
DELIVERY (IN DAYS):0219
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:GX CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:NB CUSH/DUNN THKNESS:B UNIT CONT:E5 OPI:M INTRMDTE CONT:E5 INTRMDTE CONT QTY:004 PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:39 -39 ESD sensitiv electrnic dvce
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ESD and PHYSICAL protection are required for contacts, leads, terminals, and other protrusions by means of container design, cushioning, and/or other ESD protective devices. Components with pins or leads shall have adequate cushioning to PREVENT DAMAGE, BREAKAGE and/or BENDING OF LEADS when not specified in the packaging codes.
This item requires DOD QUALIFIED Electrostatic Discharge (ESD) and/or Electromagnetic Interference (EMI) protective packaging materials in accordance with MIL-PRF-81705. All items subject to degradation from ESD/EMI environmental field forces shall be handled and packaged at an approved field force protective work station.
For ESD protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used along with MIL-PRF-81705, Type III (MIL-DTL-117 Type II, Class H, Style 2) barrier material wrap if the contract doesn't specifically require ESD approved cushioning.
For EMI protection MIL-PRF-81705, Type I (MIL-DTL-117, Type I, Class F, Style 1) converted bag barrier material shall be used.
The supplier shall be responsible for verifying that all MIL-PRF-81705 barrier materials (or converted bags) were supplied from a qualified manufacturer currently listed on QPL-81705.
For additional ESD/EMI packaging information, refer to the following DLA
SPE7M1-26-U-6347
SECTION B
PR: 1000244097 PRLI: 0001 CONT’D
packaging website: https://www.dla.mil/HQ/LogisticsOperations/Packaging/PackFAQs/ESDS/
If the preservation method code in the solicitation does not specify ESD/EMI protection and the Offeror's proposed item of supply is subject to degradation from ESD/EMI environmental field forces, Offerors shall provide appropriate technical packaging data with their proposals.
ZZ ADDITIONAL SPECIAL MARKING: 39 ESD sensitive electronic device requirements of MIL-STD-129 apply
ATTENTION: THIS DEVICE IS CLASSIFIED AS AN ELECTROSTATIC DISCHARGE (ESD) SENSITIVE DEVICE: >>PRECAUTIONARY PACKAGING, HANDLING, AND PROCESSING PROCEDURES SHALL BE USED TO PREVENT DAMAGE FROM ELECTROSTATIC/ELECTROMAGNETIC AND OTHER ENVIRONMENTAL FIELD FORCES.<<
THE CONTRACTOR/PACKAGER SHALL POSSESS THE FOLLOWING FOUR MANDATORY ESD CAPABILITIES TO PROPERLY HANDLE AND PACKAGE ESD SENSITIVE DEVICES:
1. SHALL HAVE AN ESD CONTROL PROGRAM (ANSI/ESD S20.20).
2. SHALL HAVE AN ESD WORKSTATION (MIL-HDBK-773). ALL ITEMS AND PACKAGES SHALL BE HANDLED, PACKAGED, AND OPENED AT AN APPROVED ESD WORKSTATION -OR- FIELD SERVICE KIT. FOR FURTHER INFORMATION, CONSULT MIL-HDBK-773.
3. SHALL HAVE APPROVED PACKAGING MATERIALS BY QUALIFIED SOURCES TO COMPLY WITH METHOD OF PRESERVATION "GX". REQUIRED BARRIER BAG IS MIL-PRF-81705, TYPE I (MIL-STD-2073-1E, PARAGRAPH 5.2.4.1 AND APPENDIX J, TABLE J.Ia, Code GX).
4. EMPLOYEES SHALL BE TRAINED IN PROPER GROUNDING, HANDLING, AND PACKAGING OF ESD SENSITIVE DEVICES TO ENSURE PARTS ARE NOT COMPROMISED/EXPOSED TO ESD (MIL-HDBK-773).
NO WAIVERS OR DEVIATIONS TO THESE TECHNICAL REQUIREMENTS PERMITTED.
For more information on ESD visit: https://www.dla.mil/HQ/LogisticsOperations/Packaging
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.

SPE7M1-26-U-6347 NSN/Part Number: 5998-01-530-4716 Quantity: 9 EA Purchase Request: 1000244097QTY: 9 Delivery: 219 days ADO