This Government Contract opportunity from Department Of Defense was posted on December 12, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Dual High Resistance Bridge System

Closed

PANRSA25P0000008460Federal

Submission Closed01/15/2026, 09:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334515

New

International

NOI: Viavi CX300 ComXpert Communications Service Monitor

Solicitation # PA26020

The Capital Regional District is issuing a notice of intent for solicitation PA26020 to procure one Viavi CX300 ComXpert Communications Service Monitor. This equipment is essential for the maintenance, troubleshooting, and compliance verification of approximately 500 Motorola subscriber radios, specifically supporting Motorola MOTOTRBO radio testing with automated alignment, tuning, and recertification capabilities. The procurement includes a five-year Total Care Warranty that covers annual recertification services. The estimated value of this acquisition is 130,666 CAD, including applicable taxes. The agency intends to perform a direct award to Testforce Systems Inc., as they are identified as the sole authorized Canadian distributor and service provider for Viavi Solutions communications test equipment. To qualify for this award, the vendor must be an authorized Canadian distributor capable of providing warranty support, calibration coordination, and manufacturer-certified technical support within Canada. The procurement process is managed by Michael Mulder, Manager of Procurement, with a response deadline of October 30, 2026.

Capital Regional District

POSTED

DEADLINE

Supply of Bromine ColorimetersThis subcontract involves the procurement and delivery of 10 Bromine Colorimeters for prime contractors supporting DLA Troop Support Medical Supply Chain projects. The units must strictly adhere to NSN 6630016905334 specifications and be packaged and marked in accordance with MIL-STD-2073-1E and Medical Marking Standard No. 1. The contract requires full compliance with the Buy American Act, the Berry Amendment, and FAR 52.204-24. Managed under NAICS code 334515 for the Department of Defense, the completed units are to be delivered to the designated destination in FPO 09565.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Flow Rate Indicating Meter Kit SupplyThis subcontract, issued by the Department of Defense under the DLA Weapons Support Aviation Supply Chain, requires the procurement or manufacture of one Flow Rate Indicating Meter Kit, identified by NSN 6680017377180. The selected contractor is responsible for ensuring that all preservation, packaging, and marking are completed in strict accordance with MIL-STD-2073-1 Appendix D. To be eligible for this award, contractors must possess a valid CAGE code and maintain an active SAM registration. The performance of the contract will take place in Mayport, and the response deadline for this requirement is October 27, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-1092

Solicitation SPE7M1-27-T-1092 is a fixed-price procurement issued by the DLA Weapons Support Maritime Supply Chain for two units of a special scale meter, identified by NSN 6625-01-541-0598. The item is designated as a critical application item and is associated with part numbers from Electric Boat Corporation and Ohio Semitronics Inc. Delivery is required by May 22, 2027, with a requested ship date of April 6, 2027, to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract specifies FOB Origin terms, with inspection and acceptance occurring at the destination. Compliance requirements include adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The procurement incorporates DLA technical and quality requirements via the RA001 master list and mandates specific hazardous material labeling under 29 CFR 1910.1200 if applicable. Key regulatory clauses include DFARS 252.204-7012 for safeguarding covered defense information, the Buy American Act for domestic sourcing, and FAR 52.243-1 for fixed-price changes. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-1088

Solicitation SPE7M1-27-T-1088, issued by the DLA Weapons Support Maritime Supply Chain, is for the procurement of two special scale meters under NSN 6625-01-541-0596. This critical application item is associated with Electric Boat Corporation part number 7006883IT1A-2 and Ohio Semitronics Inc part number 80126. The required delivery date is April 6, 2027, with a delivery window of 157 days after receipt of the order. Shipping is designated as FOB Origin, with the final destination for delivery, inspection, and acceptance located at DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List, and the item may contain batteries, requiring compliance with hazardous materials packaging and shipping standards. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. The solicitation is categorized under NAICS 334515 and includes various federal regulations, including DFARS requirements for safeguarding covered defense information, prohibitions on certain telecommunications equipment, and compliance with the Buy American Act and Berry Amendment.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-0210

Solicitation SPE7M1-27-T-0210 is a fixed-price request for quotation issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 10 audio level meters, identified by NSN 6625006489157. This acquisition is designated as a total small business set-aside under NAICS code 334515. The required delivery is 91 days after order with shipping terms set as FOB Origin, destined for DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to quality and safety standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Specific environmental restrictions prohibit the intentional addition of mercury, except for functional use in batteries. Quality assurance will be conducted at the destination using a zero-based sampling plan in accordance with MIL-STD-1916 or ASQ H1331. Additionally, the contractor must utilize the Wide Area WorkFlow system for all invoicing and payment requests. Compliance with the Buy American Act, the Berry Amendment, and various cybersecurity regulations, including DFARS 252.204-7012, is required.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE2DH-27-T-0216

Solicitation SPE2DH-27-T-0216 is a request for quotations issued by the DLA Troop Support Medical Supply Chain FSH for the procurement of 10 bromine colorimeters, identified by NSN 6630-01-690-5334. The contract requires delivery to the USS Arleigh Burke DDG 51 at FPO AE 09565 within 20 days after order, with shipping terms set as FOB Destination. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS) by October 26, 2026. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E, RP001 DLA packaging requirements, and Medical Marking Standard No. 1. Hazardous materials must be labeled according to the Hazard Communication Standard 29 CFR 1910.1200. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include electronic invoicing through the Wide Area WorkFlow (WAWF) system and compliance with the Buy American Act and Berry Amendment. The procurement falls under NAICS code 334515 and is managed by contracting official Tina Vu.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Solicitation # SPE2DS-27-T-0757

Solicitation SPE2DS-27-T-0757, issued by the Defense Logistics Agency for the Medical Supply Chain MD Surg FSF, seeks the procurement of 20 packages of lens paper under NSN 6640-01-459-4239. The required material must be Type 1, Class 5, for wet use, with dimensions of 4 inches by 6 inches, and each package must contain 50 individual pieces. Delivery is required within 20 days after order to the USS Harvey C Barnum Jr (DDG 124) at FPO AE 09591-0100, with FOB destination terms. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically referencing RA001, RP001, and RQ011. Packaging must be commercial and sealed to prevent damage, with marking and labeling complying with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Inspection and acceptance will occur at the destination per FAR 52.246-2. Invoicing must be processed electronically through the Wide Area WorkFlow system. Compliance with the Buy American Act, DFARS cybersecurity standards, and various FAR clauses regarding equal opportunity and trafficking in persons is required. All quotes must be submitted via the DLA Internet Bid Board System.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Manufacture of BRIDGE RLS, BENCHTOThis subcontract involves the manufacture of BRIDGE RLS, BENCHTO hardware for prime contractors supporting DLA Weapons Support and NAVSUP WSS projects. The work is managed by the Department of Defense through SPRMM1 DLA Mechanicsburg under NAICS code 334515. The contractor is responsible for producing finished units with NIIN 017362629, ensuring strict adherence to design reference E49808L-052 and Cage Code 7ZXR5. The scope of work requires maintaining the total equipment baseline configuration across hardware, software, and firmware. Additionally, the manufacturer must utilize new production materials and comply with DLATERMHZ01 traceability requirements. The opportunity was posted on October 19, 2026, with a response deadline of December 1, 2026.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Brand Name NI – Various PXI/PXIe Test and Measurement Modules

Solicitation # 47QSSC-27-Q-0023

Solicitation 47QSSC-27-Q-0023 is a combined synopsis and request for quote issued by the General Services Administration for the procurement of specific National Instruments (NI) PXI/PXIe test and measurement modules. The requirement consists of five distinct line items, including a digital I/O module, a 3 GHz multiplexer, a waveform generator, a relay module, and a multi-bank multiplexer, all intended for use with a National Instruments PXIe-1084 PXI Express test rack. This is a total small business set-aside procurement conducted under the simplified acquisition procedures of FAR Part 12. The award will be made on an all-or-none basis to the responsible vendor providing the lowest evaluated price that meets all material requirements. Strict adherence to brand-name specifications is required, and all products must be new and unused. Offerors must maintain active registration in SAM.gov and be capable of receiving purchase orders via EDI or the OMS Vendor Portal. Deliveries are destined for Keyport, Washington, and must comply with MIL-STD-129R marking and shipping label requirements. Quotations must be submitted via email by the specified deadline and include all required representations, certifications, and a signed MIL-STD-129R form.

Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

DEADLINE

VDATS Ametek Repair BPA

Solicitation # FA857927Q0001

FA8579 Software Sprt Afsc Pzim

POSTED

DEADLINE

Supply of Aneroid Manometers (NSN 6685-01-741-6693)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OR OEM Division, requires the manufacture or procurement of 14 precision aneroid manometers, part number 25NVCBR5454-100 (NSN 6685-01-741-6693). The project is designated as a Total Small Business Set-Aside under NAICS code 334515. All units must be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contractor must adhere to strict technical and regulatory standards, including quality assurance per MIL-STD-1916 or ASQ H1331 and the application of marking code S-05. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, and all deliverables must satisfy the requirements of the Buy American Act.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 6 days

AI Contract Overview

The U.S. Army TMDE Activity (USATA) is seeking to procure a new Dual Bridge or an equivalent unit to replace aging and obsolete test equipment used in resistance measurements at the Army Physical Standards Labs at Redstone Arsenal. The required equipment includes two high resistance coaxial matrix scanners that ensure measurement consistency across current and upgraded systems, two 1000Vdc programmable voltage sources, an input signal interface or electrometer, a high resistance standard with temperature stabilization, and two air baths designed to accommodate various sizes of resistance standards. Additionally, a portable equipment rack is requested to facilitate system mobility and protect sensitive connections, although it does not need to be EMI shielded. The solicitation, posted on June 23, 2025, with a response deadline of July 3, 2025, is issued by the Department of the Army under NAICS code 334515. Interested vendors can contact designated points of contact, Taylor Siskoff and Portia Sampson, for further information. The contract aims to ensure the continued accuracy and stability of resistance measurement standards critical to Army testing operations.

General Info

Procurement of Dual Bridge system including scanners, voltage sources, and standards for Army labs by July 2025.

Agency

Department Of Defense → W6QK Acc-Rsa

NAICS

334515 - Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

Place of Performance

AL, USA

Set-Aside

SBA

Documents

Justification and Approval for Dual Source High Resistance Bridge System PANRSA-25-P-0000-008460

5 pages · justification-and-authorization

High

Purchase Description - Procurement of Dual Bridge (W80RA6-03-24C)

sow

High

Justification for Other Than Full and Open Competition - Dual Source High Resistance Bridge

3 pages · justification-and-authorization

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

2 updates

PhaseClosed

PostedJun 23

Solicitation

Notice updatedJun 23

Notice details unchanged. Attachments may have changed.

Notice updatedDec 12

Notice type changed from Solicitation to Special Notice. Response deadline changed from Jul 3, 2025 to Jan 15, 2026. The notice title changed. Set-aside added: Total Small Business Set-Aside (FAR 19.5). The notice description changed. The point of contact changed.

Response DeadlineJan 15

Deadline has passed

Submission Closed

01/15/2026, 09:30:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W6QK Acc-Rsa

Contacts2 people available

OfficeREDSTONE ARSENAL, AL, 35898-5200, USA

Organization / AgencyDepartment Of Defense → W6QK Acc-Rsa

Office AddressREDSTONE ARSENAL, AL, 35898-5200, USA

Contacts

Ben Hymas

contact@example.gov

Shalanda McMurry

contact@example.gov

Full Description

The US Army Contracting Command-Redstone Services & IT Solution Branch, has a requirement to procure one (1) Dual High Resistance Bridge System or equivalent unit due to obsolescence and aging of existing test equipment and standards. The new equipment will provide accuracy and stability in resistance measurements. This solicitation, PANRSA-25-P-0000 008460, is issued as a Request for Quote (RFQ).

===========================================

CONTRACT TYPE: Firm-Fixed-Price (FFP)

SET-ASIDE: Small Business Set Aside

RFQ INSTRUCTIONS AND EVALUATION CRITERIA:

In accordance with the PRODUCT DESCRIPTION below, a submission of a FFP quote for the item(s) listed in is hereby requested. The U.S. Government (USG) reserves the right to make award based on initial quotes received, without discussions with vendors; therefore, the initial quote should contain the vendor's best terms.

See redacted J&A for additional information

===========================================
PRODUCT DESCRIPTION:

The new Dual High Resistance Bridge System or equivalent unit shall include the following:

* High Resistance Coaxial Matrix Scanner: the Army requires system continuity in measurement architecture between current and upgraded scanners. The obsolesced 20 channel scanner utilizes coaxial relays that are not employed in any other matrix scanner aside from upgraded 10 channel scanners. (Required Quantity of 2)

* 1000Vdc Programable Voltage sources (Required Quantity of 2)

* Input signal interface/Electrometer: (Required Quantity of 1)

* 10MΩ-1TΩ Temperature Stabilized High Resistance Standard: Upgrade existing aging standard. (Required Quantity of 1)

* Air Baths: The requirement air baths are to account for the variation in sizes of resistance standards that the Army supports such as High Resistance decade boxes and high resistance transfer standards that are much larger than single value resistance standards. (Required Quantity of 2)

* Equipment Rack: The rack is an accessory that is desired to aid in portability of the system and to maintain/ protect the integrity of sensitive connections. The Army’s Dual Source High Resistance Bridge or equal to parts does not require an EMI shielded rack and based on historical measurement data it is not a requirement. (Required quantity of 1)

===========================================
Delivery Address: U.S. Army TMDE Activity, Attn: James Rodgers, Building 5435, Redstone Arsenal, AL 35898
===========================================
A complete quote shall consist of the following:

1. All items, including brand name items, as specified in the PRODUCT DESCRIPTION section as well as the quantities specified.

2. Delivery terms and conditions.

3. Unit price and subtotal price for each item listed in the PRODUCT DESCRIPTION section and a total price for all items.

4. Identification of any discounts and/or reductions to established rates or prices.

5. Full company name.

6. Identify business size

7. Identify Socio-economic status, if applicable.

8. Include Point of Contacts (POCs): name, position, office and mobile telephone numbers and email address.

9. Cage Code

10.Unique Entity Identifier (UEI)

11.GSA Schedule/Contract Number, if applicable

12. List of representations that the product offered meets the technical requirements, and how it meets the same requirements, listed in the “Product Description” paragraph, above.

13. Delivery within 60 days.

=================================================

The response date for this RFQ is January 15, 2026 @ 3:30pm CDT. Any quotes received after the required submission date and time will be rejected without further review. No phone calls will be accepted. Questions may be submitted, but any submitted after the said date and time listed on this RFQ posting are not guaranteed an answer. Quotes may be submitted via email to the following POCs: Benjamin Hymas, Contract Specialist at benjamin.c.hymas.civ@army.mil and Shalanda McMurry, Contracting Officer, at shalanda.r.mcmurry.civ@army.mil

=================================================

It is the vendor’s responsibility to read the RFQ and any/all related documents carefully and completely and to monitor for any updates to the RFQ on a regular basis.

Additionally, it is the vendor’s responsibility to ensure/verify the Government receives its submission on or before the date/time specified.

=================================================

BASIS OF AWARD:

Award will be made on the basis of best value, evaluating price, technical capability and warranty. Technically capability means a quote which provides all required specifications detailed in the Product Description as well as demonstrating capability to fulfill the requirement.

The minimum technical requirements are as follows: All items quoted are as specified in the purchase description, including brand name items. Delivery shall be within 30 days after receipt of order or sooner.

=================================================

Adjectival Rating Description

Acceptable Quote meets the requirements of the RFQ/solicitation, including the minimum technical requirements. Unacceptable Quote does not meet the requirements of the solicitation, including the minimum technical requirements.

Unacceptable Quote does not meet the requirements of the RFQ/solicitation, including the minimum technical requirements.