Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Combined Synopsis/Solicitation opportunity was posted on June 3, 2016. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Procurement of Machining Services for a High Pressure Cryogenic Globe Valve

Closed
NNS16582588RFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332919
New
Federal
Manufacture of Butterfly Valves (NIIN 016041720)This subcontract involves the manufacture of butterfly valves, identified by NIIN 016041720, for prime contractors supporting DLA supply contracts under the Department of Defense. The fabrication and assembly process must strictly adhere to TDP Version No. 003 and Cage Code 98032, specifically referencing number 2503500-00. All finished products are to be delivered FOB Destination. Compliance requirements are stringent, necessitating adherence to the Buy American-Balance of Payments Program for materials and MIL-STD-130, REV N for marking. Additionally, the provider must maintain CMMC and FASCSA compliance. The opportunity is categorized under NAICS code 332919 and is managed by the SPRMM1 DLA Mechanicsburg agency.
SPRMM1 DLA Mechanicsburg

POSTED

about 20 hours ago

DEADLINE

in 26 days
NAICS: 332919
New
Federal
ELBOW,PIPE
Solicitation # N0010426QFF25
Solicitation N00104-26-Q-FF25 is a total small business set-aside, fixed-price request for quotations issued by NAVSUP Weapon Systems Support Mechanicsburg for the procurement of various pipe elbows. The requirement is a combined solicitation where awards may be made at the individual CLIN level. Due to the components being used in crucial shipboard systems, the material is designated as Special Emphasis material (Level I, Scope of Certification, or Quality Assured), necessitating strict control procedures to prevent failures that could lead to serious personnel injury or loss of vital shipboard systems. The procurement is designated as a DO-rated order under the Defense Priorities and Allocations System. Technical requirements specify that items must meet ASME-B16.11 and NAVSHIPS drawing standards, with specific material requirements for Alloy UNS C92200, UNS C90300, and ASTM-A403 forgings. Contractors must maintain a quality system compliant with ISO-9001, ISO-10012, or MIL-I-45208. Key deliverables include hydrostatic and non-destructive testing certifications, which must be submitted via Wide Area Workflow (WAWF) for review and acceptance by Portsmouth Naval Shipyard prior to shipment. Evaluation for award will be based on the most advantageous terms, with past performance weighted as more important than price. All supplies must be marked for traceability per MIL-STD-792 and packaged according to MIL-STD-2073-1.
Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

in 14 days
NAICS: 332919
New
Federal
STEM,FLUID VALVE
Solicitation # N0010426QFB59
Solicitation N0010426QFB59, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of Fluid Valve Stems (NSN 4820-01-314-4040). The material is designated as Special Emphasis Level I, as it is used in critical shipboard systems where failure could lead to catastrophic loss of life or vessel. The requirement is for 15 units, with a delivery timeline of 365 days after the effective date of the contract. This is a DO-rated order for national defense use, and the award will be based on the most advantageous proposal, with past performance weighted as more important than price. Technical requirements specify the use of QQ-N-286 material, prohibiting weld repairs and requiring quantitative chemical and mechanical analysis, as well as ultrasonic inspection for starting materials 4 inches or greater in diameter. The contractor must maintain an ISO-9001 compliant quality system and provide a Certificate of Compliance and test certifications via Wide Area Workflow (WAWF) prior to shipment. Inspection and acceptance occur at the origin, with a zero-defect lot acceptance policy. Packaging must adhere to MIL-STD-2073-1 and MIL-STD-129 standards, and the contract includes strict configuration control and mercury-free requirements.
Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

in 9 days
NAICS: 332919
New
Federal
N0038326PR0R874_FMS
Solicitation # N0038327QS145
Navsup Weapon Systems Support

POSTED

about 20 hours ago

DEADLINE

in about 1 month
NAICS: 332919
New
Federal
RESTRICTOR VALVE AY
Solicitation # SPRMM126QKH76
Solicitation SPRMM126QKH76, issued by DLA Mechanicsburg, is a small business set-aside for the manufacture and delivery of Restrictor Valve Assemblies (NIIN 015881727). The requirement specifies that items must conform to the design represented by Cage Code 78062, reference number 21847-001, and adhere to Technical Data Package version 002. Award will be determined based on Lowest Price Technically Acceptable (LPTA) criteria. The solicitation closes on November 6, 2026, and requires offerors who are not the original manufacturer to identify the Original Equipment Manufacturer (OEM) and their respective CAGE code. Key technical and quality requirements include strict adherence to MIL-STD-130 for physical identification and MIL-STD-2073 for packaging and marking. All materials must be free from metallic mercury contamination, as such contamination is grounds for rejection. If additive manufacturing is utilized, the contractor must maintain a Master Component Traceability Ledger and submit it electronically via the NAVSUP HQ AM mailbox and Wide Area Workflow (WAWF). Inspection and acceptance will occur at the source (origin). Invoicing and receiving reports must be submitted electronically through the PIEE-WAWF system.
SPRMM1 DLA Mechanicsburg

POSTED

about 20 hours ago

DEADLINE

in 16 days
NAICS: 332919
New
Federal
Final Assembly and Pressure Testing of Salvage Ball ValvesThis subcontract involves the final assembly and pressure testing of Compartment Salvage Ball Valves for prime contractors supporting Navsup Weapon Systems Support Mech. The scope of work includes the assembly of valve bodies, balls, stems, and seats, followed by rigorous pressure and leak testing utilizing vacuum leak detectors and hydrostatic benches in accordance with MIL-DTL-1222. Additionally, the contractor is responsible for applying final markings and preservation as specified by MIL-STD 2073 to ensure the delivery of fully certified components. The project falls under NAICS code 332919 and is managed under the Department of Defense. The procurement process includes a response deadline of November 4, 2026, for the delivery of the specific NIIN 011153010 valves.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 14 days
NAICS: 332919
New
Federal
Manufacturing of 1-inch NPS Pipe Unions (NIIN 008810632)This subcontract involves the manufacturing of 1-inch NPS pipe unions, identified by NIIN 008810632, for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The fabrication process must utilize alloys UNS C92200 or UNS C90300 in strict accordance with FED-STD-H28, ASTM-B61, ASTM-B505, and ASTM-B584 standards. Notably, welding is strictly prohibited during production. To ensure quality and safety, the contractor must perform mandatory hydrostatic and soapsuds testing and provide certification that the components are mercury-free. Compliance with either ISO-9001 or MIL-I-45208 quality standards is required. The opportunity was posted on October 20, 2026, with a response deadline of November 6, 2026, falling under NAICS code 332919.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 16 days
NAICS: 332919
New
Federal
Valve Body Fabrication (Alloy UNS C96400)This subcontract involves the casting and machining of 5-inch 3-way ball valve bodies for prime contractors supporting NAVSUP Weapon Systems Support. The fabrication must strictly adhere to Newport News Shipbuilding drawing 6404977 using ASTM-B369 Alloy UNS C96400. Key technical requirements include ensuring that mounting flange bolt holes remain undrilled and that all sealing surfaces comply with CSD008 GAC standards. The project requires the contractor to maintain Confidential clearance and perform necessary radiography. Final deliverables consist of the machined bodies accompanied by comprehensive non-destructive testing reports. The opportunity is categorized under NAICS code 332919 and is managed by the Department of Defense.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 29 days
NAICS: 332919
New
Federal
VALVE,BALL
Solicitation # N0010426QZB70
NAVSUP Weapon Systems Support Mechanicsburg is soliciting quotes for the procurement of Compartment Salvage Ball Valves (NSN 4820-01-115-3010). Due to their use in crucial shipboard systems where failure could lead to catastrophic loss of life or vessel, these items are designated as Special Emphasis material Level I. The procurement is a Full and Open competition with a response deadline of November 4, 2026. Award will be made to the technically acceptable offeror determined to be most advantageous to the Government, with past performance weighted as more important than price. The contract mandates rigorous quality assurance and traceability standards. Contractors must maintain a quality system compliant with ISO 9001 or MIL-I-45208 and provide quantitative chemical and mechanical analysis for critical components, including the body, tube, and ball. Strict inspection criteria are in place, including a zero-defect requirement for lot acceptance and mandatory non-destructive testing. Deliveries are FOB Destination, and all invoicing must be processed through the Wide Area Workflow system. The resulting award will be DO certified for national defense under the Defense Priorities and Allocations System.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 14 days
NAICS: 332919
New
Federal
SWIVEL JOINT,HYDRAU
Solicitation # SPRHA1-27-Q-0046
Solicitation SPRHA1-27-Q-0046 is a request for one hydraulic swivel joint (NSN 4730011487849LE) for the Department of Defense, managed by the DLA Aviation office at Hill Air Force Base, Utah. The procurement is categorized under NAICS code 332919 and is not set aside for any specific business category. The primary deliverable is the hydraulic swivel joint assembly, which must be manufactured in strict accordance with the ESA approved Technical Data Package and drawing PS23041. Key technical requirements emphasize close tolerance matching of components and rigorous attention to surface finish, assembly, and sealing to meet acceptance test standards. To be eligible for award, offerors must be fully qualified and submit a Source Approval Request package following AFMC 23-113 and FAR 9.2. This includes certifying access to necessary manufacturing, inspection, and testing facilities, verifying possession of the current Technical Data Package, and submitting a qualification test plan for ESA approval. Compliance with DFARS 211.741 for Unique Identification is mandatory. Packaging and marking must adhere to stringent military standards, including MIL-STD-129 and MIL-STD-2073-1, with specific requirements for hazardous materials and electrostatic sensitive devices where applicable. The response deadline for this solicitation is November 19, 2026.
Ut DLA Aviation At Ogden

POSTED

2 days ago

DEADLINE

in 29 days
NAICS: 332919
New
Federal
UNION,PIPE
Solicitation # N0010426QFF66
Solicitation N0010426QFF66 is a fixed-price request for quotations issued by NAVSUP Weapon Systems Support Mechanicsburg for the procurement of a Pipe Union (NSN 4730-00-881-0632). The material is designated as Special Emphasis Material Level I, meaning it is intended for use in crucial shipboard systems where failure could result in serious personnel injury or loss of the vessel. Due to this criticality, the contract mandates rigorous quality controls, including a requirement for the contractor to maintain an ISO-9001 or MIL-I-45208 compliant quality system. The order is DPAS DO-rated for national defense use, and the government will award the contract to the most advantageous offeror based on a trade-off where past performance is considered more important than price. Technical requirements specify that the 1 inch NPS Union Assembly must adhere to Naval Ship Systems Command Drawing 803-1385946, with strict prohibitions against welding on UNS C92200 and UNS C90300 materials and the intentional addition of mercury. Key deliverables include hydrostatic and soapsuds testing certifications, and all material verification and traceability data must undergo 100 percent inspection. Delivery is required within 365 days of the contract effective date on an FOB Destination basis. Administrative processing, including invoicing and the submission of certification data, must be conducted through the Wide Area Workflow (WAWF) system, with final material shipment prohibited until certification acceptance is received from the Portsmouth Naval Shipyard.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 16 days
NAICS: 332919
New
Federal
STEM ASSY
Solicitation # N0010426QNE96
This solicitation, issued by NAVSUP WSS Mechanicsburg, is for the procurement of a Stem Assembly (NSN 011386557) designated as a Critical Safety Item (CSI). Due to the high probability of failure resulting in serious personnel injury or loss of shipboard systems, the material is classified as Special Emphasis material (Level I). The contractor must adhere to strict quality standards, including ISO 9001 or SAE AS9100, and provide comprehensive Objective Quality Evidence (OQE) and Certificates of Compliance. The procurement is a DO-rated order for national defense, and the award will be made to the technically acceptable offeror deemed most advantageous based on price and past performance, with past performance weighted as the more important factor. Technical requirements specify the assembly must conform to Newport News and General Dynamics drawings, utilizing specific materials such as QQ-N-286 for the stem and ASTM-B505 for the retaining nut. Strict mandates are in place for thread inspection per FED-STD-H28 and the use of approved laboratories for Slow Strain Rate Tensile Testing. All items must be mercury-free and maintain full traceability. Inspection and final acceptance will occur at the contractor's plant via the LEVEL I/DSS SOC Certifying Activity, with all certification data submitted through the Wide Area Workflow (WAWF) system to Portsmouth Naval Shipyard. Packaging must comply with MIL-STD-2073 and MIL-STD-129, and the contract is subject to Buy American and Balance of Payments program requirements.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 29 days

General Info

Agency

N/A

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Place of Performance

NASA/Stennis Space Center, STENNIS SPACE CENTER, MS, 39529, USA

Set-Aside

SBA

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

3 updates
PhaseClosed
Posted

Combined Synopsis

Notice updated

The notice description changed.

Notice updated

Notice details unchanged. Attachments may have changed.

Notice updated

Notice details unchanged. Attachments may have changed.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyN/A
Contacts2 people available
OfficeN/A
Organization / Agency
N/A
Office AddressN/A
Contacts
George R. PiccoloContract Specialist
contact@example.gov
+1 (555) 000-0000
Gerald L. NorrisContracting Officer
contact@example.gov
+1 (555) 000-0000

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS