Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PRODUCTION LOT TESTING

Active
SPE8E7-26-T-3469Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicits ten tube axial fans under NSN 0001S00000061 for delivery within 193 days after award, with a purchase request number of 7017758323. The procurement is governed by the Defense Logistics Agency’s technical and quality requirements referenced from the DLA Master List, with compliance determined by the revision in effect on the solicitation or award date depending on the acquisition size. The item is subject to strict export control under ITAR or EAR, prohibiting unauthorized disclosure of associated technical data to foreign persons anywhere in the world, including foreign nationals employed by U.S. firms. Access to this data is restricted to contractors with an approved U.S./Canada Joint Certification Program status, completion of mandatory DOD export control training, and formal authorization from DLA. Additional quality requirements include inspection and acceptance at origin, removal of government identification from non-accepted items, and adherence to DLA packaging standards. The contracting office is the DDSP New Cumberland Facility, with Kelly Mitchell listed as the primary point of contact, and the place of performance is New Cumberland, Pennsylvania. The solicitation is under the NAICS code 331318, and bidders must be certified at CMMC Level 2 as a third-party assessment organization to be eligible. The solicitation opened on August 5, 2026, with responses due by August 17, 2026.

General Info

Ten tube axial fans ordered under DLA, ITAR/EAR controlled, CMMC Level 2 certified, delivery in 193 days, New Cumberland, PA.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

331318 - Other Aluminum Rolling, Drawing, and ExtrudingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E7-26-T-3469 for DLA Troop Support Lighting Equipment

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Kelly Mitchell
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FAN,TUBEAXIAL
FAN, TUBEAXIAL
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 0001S00000061 Quantity: 10 EA Purchase Request: 7017758323QTY - See Solicitation Delivery: 193 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331318
New
DIBBS
NOZZLE, FUEL AND OIL
Solicitation # SPE8EE-26-T-2270
The contract pertains to the procurement of a fuel and oil nozzle with part number HM020-917-11 and NSN 4930-01-583-8673, supplied by ROBERTSON FUEL SYSTEMS, L.L.C., under solicitation SPE8EE-26-T-2270. A total of 11 units are required to be delivered FOB origin with zero variance allowed in quantity, and the delivery window is set at 167 days from the contract award, with an original required delivery date of April 12, 2027. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951, while also adhering strictly to MIL-STD-129 for marking and labeling, and RP001 for DLA-specific packaging requirements. The DLA Master List of Technical and Quality Requirements takes precedence over any other standards, and all technical and quality provisions referenced by R or I numbers are incorporated from the official DLA database. Sampling requirements mandate the use of MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise specified, and critical attributes are assigned verification level VII or an AQL of 0.1, with major and minor attributes at IV and II or AQLs of 1.0 and 4.0 respectively. The item is classified as a critical application item, and the contract includes specific guidance on unit of issue, palletization, and transportation procedures referencing DLAD Proc Notes C19 and C20. The delivery address is DLA Distribution’s New Cumberland Facility in Pennsylvania, and the solicitation is a total small business set-aside under NAICS code 331318 with a response deadline of August 17, 2026, and the point of contact for inquiries is Philip Ferrara of the Department of Defense.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331318
New
DIBBS
COMPUTER SUBASSEMBL
Solicitation # SPE8EN-26-T-2788
This contract outlines the procurement of a computer subassembly under solicitation SPE8EN-26-T-2788, issued by the Defense Logistics Agency for the Department of Defense. The item, identified by NSN 7050-01-491-6931 and part number 1756-IB16, is to be supplied by ROCKWELL AUTOMATION INC in a quantity of four units, with a unit price of $4.00 and a total price of $16.00. Delivery must occur within 167 days, with FOB origin terms, inspection and acceptance points at the destination, and no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E, marking must follow MIL-STD-129 with no special codes, and shipping is directed to DLA Distribution San Diego at the specified address. The supplier must adhere to DLA packaging standards and ensure the complete absence of mercury or mercury-containing compounds in the hardware, except for permitted functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with additional containment requirements for portable fluorescent lamps and instruments. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with revisions controlled based on the acquisition type and solicitation timeline. Compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 is required, with the vendor responsible for completing a self-assessment. The item is classified under NAICS code 331318, and all units of issue align with DoD-authorized standards referenced by the official DLA document. The original required delivery date was October 9, 2026, with a need ship date of February 1, 2027, and the solicitation was posted August 5, 2026, with responses due by August 17, 2026. Covered defense information applies, and transportation details must follow DLAD Proc Notes C19 and C20. Point of contact for the contract is Jennifer Esworthy, reachable via email and phone provided.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331318
New
DIBBS
SPRING, HELICAL, EXTENSI
Solicitation # SPE7L1-26-T-916N
The contract calls for one helical extension spring with NSN 5360-01-141-9523 and purchase request number 7017744422, to be delivered in a single unit to the USS GEORGE WASHINGTON CVN 73 at FPO AP 96607, with delivery required within 20 days of award under FOB destination terms. The item must comply with all DLA packaging requirements per RP001 and MIL-STD-2073-1E, including specific packaging methods, materials, and marking standards per MIL-STD-129 with no special marking codes. The spring must be free from intentional addition of mercury or mercury-containing compounds, except for permitted uses such as functional components in batteries, lighting, instruments, sensors, controls, weapon systems, or specified chemical reagents, with portable devices containing mercury requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. All technical and quality specifications referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. The contract is issued under solicitation SPE7L1-26-T-916N with an original required delivery date of August 3, 2026, and includes transportation instructions per DLAD Proc Notes C19 and C20, with shipment coordinated via VSM and DD Form for government use.
LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331318
New
Federal
Supply of 4" x 4" x 1/4" 6061-T6 Aluminum Square TubeThe contract requires the supply of four units of 4-foot-long 4-inch by 4-inch by 1/4-inch wall thickness aluminum square tubing made from 6061-T6 alloy or an acceptable domestic equivalent. The material specification is critical, as 6061-T6 is a high-strength, heat-treatable aluminum known for its excellent corrosion resistance and weldability, commonly used in structural applications requiring durability and precision. The tubing must meet exact dimensional and material standards to ensure compatibility with the recipient’s operational needs. The acquisition is classified as a subcontract under NAICS code 331318, which pertains to aluminum extrusion, indicating the work involves specialized manufacturing processes. The solicitation was posted on August 4, 2026, with a response deadline of August 11, 2026, at 8:00 PM Eastern Time, leaving a limited window for submissions. The place of performance is designated as Oak Ridge, Tennessee, with a zip code of 37830, suggesting the material will be delivered directly to a Department of Energy facility operated by ORNL UT-Battelle LLC. As a DOE contractor, the organization is likely utilizing the tubing for research, development, or infrastructure projects where material integrity is paramount. No set-aside provisions are specified, meaning the contract is open to any qualified supplier regardless of business size or designation.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331318
New
Federal
Supply of 6" x 2" x 1/4" 6061 Aluminum Rectangle TubeThe contract calls for the supply of two units of 4-foot-long 6-inch by 2-inch by 1/4-inch 6061 aluminum rectangle tube or a domestic equivalent, ensuring material compatibility and performance standards. The specification mandates the use of 6061 aluminum, a widely recognized alloy valued for its strength, weldability, and corrosion resistance, making it suitable for structural and mechanical applications. Each tube is dimensioned precisely to meet engineering requirements, and the quantity is limited to two units, indicating a targeted procurement for specific project needs. The solicitation is classified as a subcontract under NAICS code 331318, which corresponds to aluminum ingot and alloy manufacturing, and is issued by Oak Ridge-based ORNL UT-Battelle LLC, a Department of Energy contractor. The place of performance is designated as Oak Ridge, Tennessee, with a 37830 ZIP code, suggesting the material will be delivered directly to a DOE-affiliated facility. The response deadline is set for August 11, 2026, at 8:00 PM Eastern Time, with the opportunity posted on August 4, 2026, providing a one-week window for submissions. No set-aside designation or specific point of contact is indicated, and the procurement is open to qualified suppliers able to meet the technical and delivery requirements without additional constraints.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331318
New
Federal
Supply of 6" x 4" x 1/2" 6061 Aluminum Rectangle TubeThe contract calls for the supply of four units of 24-foot-long aluminum rectangle tubing with dimensions of 6 inches by 4 inches by 1/2 inch, manufactured from 6061-T6 aluminum or a qualifying domestic equivalent. The material must meet specified mechanical and chemical properties associated with the 6061-T6 temper, ensuring suitability for structural or high-performance applications. The place of performance is designated as Oak Ridge, Tennessee, with a zip code of 37830, indicating delivery must be made to that location. The solicitation is classified as a subcontract under NAICS code 331318, which corresponds to aluminum tube and pipe manufacturing, suggesting the work falls under industrial fabrication and supply rather than direct government procurement. The posting date for this solicitation is August 4, 2026, with a response deadline of August 11, 2026, at 8:00 PM Eastern Time, leaving a one-week window for interested parties to submit proposals. The contracting organization is ORNL UT-Battelle LLC, a Department of Energy contractor, which implies the end use of the tubing may be tied to federal research, energy, or laboratory operations. There is no set-aside designation specified, meaning the opportunity is open to all eligible contractors without preference for small businesses or other categories. All submissions must comply with the material specifications and delivery requirements outlined in the solicitation, and failure to meet the deadline or quality standards will result in disqualification.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331318
New
Federal
Aluminum Tubes, Plates, and Pipping Needs
Solicitation # PR457594
ORNL is seeking quotations for a range of aluminum materials required for technical applications, all governed under the Brand Name or Equal provision to allow for domestic equivalents. The solicitation calls for specific dimensions and tempers of 6061 aluminum products including rectangular and square tubes such as a 6-inch by 4-inch by half-inch tube, a 6-inch by 2-inch by quarter-inch tube, and a 4-inch by 4-inch by quarter-inch square tube, along with various thicknesses of 6061-T6 and 6061-T651 aluminum plates ranging from one-eighth inch to one and one-half inches, including two distinct listings for the one-eighth inch sheet. Additionally, a 4-inch schedule 80 aluminum pipe with a 4.50-inch outer diameter and a 0.337-inch wall thickness is required. All items must meet the specified alloy and temper standards without exception. The solicitation, identified as PR457594, was posted on August 4, 2026, and responses are due by August 11, 2026, with performance to be delivered to Oak Ridge, Tennessee. The request is issued by ORNL Ut-Battelle LLC, a Department of Energy contractor, and inquiries should be directed to Maureen Nanstad at the provided email address.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331318
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7M4-26-T-276C
The contract solicitation SPE7M4-26-T-276C seeks 965 helical compression springs identified by NSN 5360-00-371-0159, classified as a commercial item under the NAICS code 331318. Delivery is required to the Arizona Industries for the Blind in Phoenix, AZ 85043, with an FOB Destination term and a need ship date of January 30, 2029, and original delivery date of April 23, 2029. The contractor must comply with comprehensive packaging, preservation, and marking standards per MIL-STD-2073-1E and MIL-STD-129, including specific container types, preservation methods, and machine-readable bar coding. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via RP001 and RA001, and all items are subject to destination inspection and acceptance by the Government under FAR 52.246-1. Payment must be processed electronically via Wide Area WorkFlow, and invoice documentation must conform to approved types such as Invoice and Receiving Report or Invoice2in1. The solicitation mandates strict compliance with a broad suite of FAR and DFARS clauses, including cybersecurity safeguards under 252.204-7012, prohibition of hexavalent chromium, restrictions on covered defense telecommunications equipment, whistleblower protections, and requirements for safeguarding government personnel work product. Subcontracting is subject to a deviation allowing commercial subcontracting under 252.244-7999, and NIST SP 800-171 assessment requirements apply with a documented deviation. Offerors must certify their Small Business status and socioeconomic designations, disclose UEI and CAGE codes, and provide hazard communication data for any hazardous materials, including Safety Data Sheets compliant with OSHA regulations. All proposals must be submitted through the DIBBS portal by August 6, 2026, and award is expected to follow a Lowest Price Technically Acceptable approach based on mandatory compliance with technical, regulatory, and socioeconomic criteria, with no formal weighting of technical factors. No pricing data is provided in the solicitation, and the final contract type remains unspecified pending award.
FLUID HANDLING DIVISION

POSTED

2 days ago

DEADLINE

in about 18 hours
View Details
NAICS: 331318
New
DIBBS
CABLE, POWER, ELECTRI
Solicitation # SPE7M1-26-T-247K
The contract specifies the procurement of 500 feet of continuous electrical cable, identified by NSN 6145013810311 and part number 44A1121-18-0/9-9-US, with a strict requirement for a single unbroken length unless the advice code indicates otherwise; advice codes 2N, 28, or 34 mandate continuous length with no multiple unit packs, while 2P or 39 permit multiple unit packs. The cable must comply with all DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951 packaging standards, and must be labeled and marked per MIL-STD-129 with unit of issue and quantity per unit pack conforming to the contract. Packaging and palletization must adhere to RP001 DLA Packaging Requirements, and the item is classified as a critical application item. Delivery is FOB origin, with an acceptance and inspection point at destination, within 149 days from contract award, allowing a quantity variance of plus or minus 5 percent. The ship date is set for January 11, 2027, and the delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania. The solicitation number is SPE7M1-26-T-247K, issued under a federal procurement with NAICS code 331318, and the primary point of contact is Alisha Blanton of the Department of Defense’s Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 331318
New
DIBBS
MAGNET WIRE
Solicitation # SPE7M1-26-T-247J
The contract is for the procurement of magnet wire, identified by NSN 6145-00-937-8406 and part number MW016CHX000012NNC, with a requirement for three reels, each containing 75 pounds of continuous electrical wire. The wire must comply with NEMA MW1000 Revision NR dated January 1, 2025, and be packaged and preserved per MIL-DTL-12000 and MIL-STD-2073-1E, with marking in accordance with MIL-STD-129. No mercury or mercury-containing compounds may be intentionally added or come in direct contact with the product, except for functional uses in specified items like batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA; portable devices containing mercury must be shockproof and include a secondary containment. The unit of issue is a reel, and delivery must occur within 95 days from contract award, shipped FOB origin with zero variance allowed in quantity. Inspection and acceptance occur at the destination, with preservation methods defined as ZZ and packaging code U. The delivery address is DLA Distribution San Joaquin in Tracy, California, and the contract references DLA Procurement Notes C19 and C20 for transportation requirements. The advice code determines whether continuous length is mandatory or if multiple unit packs are acceptable, with the advice code superseding any conflicting schedule data. Full and open competition applies, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions or RFP issue date for larger ones, unless an amendment supersedes it. The contract was posted on August 3, 2026, with responses due by August 14, 2026, and is issued under a DoD procurement with a NAICS code of 331318.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M1-26-T-247D
The contract solicitation SPE7M1-26-T-247D seeks 480 feet of electrical wire, identified by NSN 6145-01-383-3897, with a permitted quantity variance of up to +10% no less than 0%, allowing delivery of up to 528 feet. The item must conform to the technical specification SAE AS81044B Revision B dated July 1, 2019, and be supplied in continuous lengths as dictated by the Advice Code 2G, which supersedes any conflicting schedule requirements. The wire shall be packaged in accordance with MIL-STD-2073-1E and preserved per MIL-DTL-12000, utilizing a dry storage condition and unspecified preservation and packaging materials indicated by "ZZ" codes, with a unit pack size of 500 feet and a packaging code of "U." Marking requirements are strictly aligned with MIL-STD-129, including standardized GS1-128 barcoding on both shipping containers and unit packages, with special marking code ZZ–ZZ indicating unspecified additional requirements. Delivery must be made FOB origin in 20 days to the Naval Sea Logistics Center at Keyport, Washington, using traceable freight methods—parcel post is prohibited. The government will inspect and accept the material at destination, enforcing compliance with Qualified Products List or Qualified Manufacturers List requirements. The contract value is estimated at $480 for the base quantity, with a maximum potential value of $528, and payment will be processed electronically through Wide Area WorkFlow (WAWF). The solicitation is a full and open competition under NAICS code 331318 and is issued by Defense Logistics Agency’s Maritime Supply Chain on behalf of the Department of Defense, with proposals due by August 14, 2026 via the DIBBS portal. Multiple FAR and DFARS clauses are incorporated, including those on combating trafficking in persons, employment eligibility verification, sustainable products, hazardous material identification, cybersecurity assessments per NIST SP 800-171, and transportation by sea. Offerors must provide valid UEI and CAGE codes and certify size status and socioeconomic categories such as small business, HUBZone, SDVOSB, WOSB, or EDWOSB where applicable, with joint venture participants required to disclose the UEI of each party
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M1-26-T-246S
The contract requires the supply of 2,000 feet of electrical wire in two continuous 500-foot spools, with the NSN part number 6145-01-384-4306, under solicitation SPE7M1-26-T-246S. The delivery schedule mandates fulfillment within 292 days after order placement, and all supplies must comply with DLA packaging requirements and technical/quality standards outlined in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. For simplified acquisitions, the applicable revision of the master list is determined by the solicitation issue or award date, while larger acquisitions adhere to the RFP issue date unless revised by an amendment. The contractor must ensure all non-accepted supplies have government identification removed prior to delivery. No data is currently available for the item, so the alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, under NAICS code 331318, managed by the Department of Defense’s Maritime Supply Chain through the DLA office, with performance required at New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Alisha Blanton, reachable via email and phone.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

New
DIBBS
Small Business Subcontracting ParticipationSmall businesses are invited to participate as suppliers or sub-tier vendors under a prime contractor’s post-award small business representation for a Department of Defense procurement managed by the DDSP NEW CUMBERLAND FACILITY. The opportunity is structured to enable eligible small businesses to support contract execution through subcontracting arrangements, leveraging the prime’s representation to fulfill small business goals without a formal solicitation or set-aside classification. Performance of the work is centered at NEW CUMBERLAND, Pennsylvania, with a zip code of 17070-5002, and the submission window for participation begins on August 5, 2026, and closes on August 17, 2026. The opportunity is accessible via the DIBBS platform and does not include a specific NAICS code or agency organizational designation beyond the parent department, but it implies direct alignment with defense logistics and supply chain needs. Participation requires engagement with the prime contractor following award, and interested parties should prepare to demonstrate capability, compliance, and capacity to meet delivery and performance expectations under the prime’s subcontracting plan.

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 423830
New
DIBBS
Domestic Sourcing and Supply Chain ComplianceThis contract requires strict adherence to the Buy American Act and Berry Amendment by ensuring all supplied components originate domestically, with verifiable documentation proving domestic origin throughout the supply chain. All materials and components must comply with federal regulations mandating preference for U.S.-made products, particularly in defense-related procurement, and suppliers must provide traceable evidence of origin at every tier of production and distribution. The obligation extends beyond final assembly to include raw materials, subassemblies, and constituent parts, with noncompliance resulting in rejection of deliverables or contractual penalties. The contract is issued under the NAICS code 423830 for wholesale trade of miscellaneous durable goods and is structured as a subcontract under the Department of Defense’s DDSP NEW CUMBERLAND FACILITY, with performance required at the facility located in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on August 5, 2026, and responses must be submitted by August 17, 2026. While no specific set-aside designation is applied, the emphasis on domestic sourcing restricts participation to entities capable of demonstrating full compliance with U.S. manufacturing and sourcing standards, making it essential for subcontractors to have robust internal verification systems and documented provenance records for all materials.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and ReportingThe contract requires the identification, labeling, and preparation of Safety Data Sheets for hazardous materials contained in delivered equipment, ensuring full compliance with OSHA and federal regulations. All activities must align with established standards for documenting chemical hazards, handling instructions, emergency measures, and regulatory information to ensure workplace and transportation safety. The work is tied to equipment delivered to the Department of Defense’s New Cumberland facility, with performance occurring at the specified location in Pennsylvania, zip code 17070-5002. This subcontract falls under NAICS code 541620, indicating it involves scientific and technical consulting services related to environmental or safety compliance. The solicitation was posted on August 5, 2026, with a firm response deadline of August 17, 2026, and is managed by the DDSP New Cumberland Facility. All proposers must demonstrate expertise in hazardous material documentation, regulatory adherence, and the ability to deliver accurate SDS documentation under federal contracting requirements. Failure to meet these standards could result in non-compliance penalties and rejection of delivered equipment.
Environmental Consulting Services

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
Supply of Air Conditioner KitsThe contract outlines the procurement and delivery of four military-spec air conditioner kits to be supplied to the Department of Defense’s DDSP NEW CUMBERLAND FACILITY, with performance localized at NEW CUMBERLAND, Pennsylvania, under ZIP code 17070-5002. The kits must fully comply with hazardous materials reporting standards and include complete Safety Data Sheets (SDS) to ensure regulatory adherence and operational safety in military environments. This subcontract under NAICS code 333415 is open for response until August 17, 2026, with the solicitation posted on August 5, 2026, through the DIBBS system. All deliverables are expected to meet rigorous military specifications and documentation requirements, emphasizing environmental and safety compliance along with timely fulfillment.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: NA
New
DIBBS
Unable to retrieve subcontract opportunitiesThe system could not retrieve the prime contract's scope of work, CLINs, or any related metadata due to gateway timeouts, preventing the identification of specific subcontract opportunities. Despite this limitation, the solicitation is listed as a subcontract opportunity under a Total Small Business Set-Aside, as defined by FAR 19.5, indicating that only small business concerns are eligible to respond. The opportunity was posted on August 5, 2026, with a response deadline of August 17, 2026, and is associated with the Department of Defense through the DDSP NEW CUMBERLAND FACILITY. The place of performance is in New Cumberland, Pennsylvania, with a zip code of 17070-5002, though no specific city, state, or country details are provided beyond that. The NAICS code is listed as NA, and no point of contact information is available. The solicitation number is SPE8E826T5025, and additional details may be accessible through the provided DIBBS link.

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
New
DIBBS
Unable to Decompose Subcontract OpportunitiesA system outage caused a 504 gateway timeout, preventing retrieval of prime contract data and rendering the decomposition into subcontract opportunities impossible. The solicitation, titled Unable to Decompose Subcontract Opportunities, was posted on August 5, 2026, with a response deadline of August 17, 2026. It is classified as a subcontract opportunity under the Department of Defense, specifically tied to the DDSP NEW CUMBERLAND FACILITY. The place of performance is listed as NEW CUMBERLAND with a zip code of 17070-5002, though no other geographic or organizational details are provided. No solicitation number, NAICS code, set aside type, or point of contact information is available. The opportunity can be accessed via the provided DIBBS link.

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541690
New
DIBBS
Regulatory Compliance and Certification ManagementThe contract titled Regulatory Compliance and Certification Management requires comprehensive support for adherence to federal regulatory standards, including enforcement of Buy American provisions, implementation of NIST SP 800-171 cybersecurity requirements, accurate reporting of hazardous materials, and the preparation of all necessary documentation to ensure full compliance. These services are critical to maintaining eligibility for Department of Defense contracts and safeguarding sensitive information. The work must be performed at the New Cumberland facility with a ZIP code of 17070-5002, under the oversight of the Department of Defense through its DDSP New Cumberland Facility. This is a subcontract opportunity classified under NAICS code 541690, which covers other scientific and technical consulting services, and is open for response until August 17, 2026. The solicitation was posted on August 5, 2026, and contractors must demonstrate expertise in navigating complex regulatory frameworks, particularly those governing defense supply chains. While no set-aside type is specified, interested parties must be prepared to meet stringent documentation and certification obligations to fulfill the contract’s compliance objectives. All proposals should be submitted through the designated DIBBS portal prior to the deadline.
Other Scientific and Technical Consulting Services

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
Manufacture and Supply of Floor Drain (NSN 4510015197819)The contract requires the manufacture and supply of three units of a specific floor drain identified by part number DDAV2CN7H2TSR and national stock number 4510015197819, with full compliance to all technical, packaging, labeling, and delivery standards established by the Defense Logistics Agency. The item must meet rigorous defense-specific specifications to ensure functional reliability and interoperability within military infrastructure. Performance of the contract is directed toward the New Cumberland facility with a zip code of 17070-5002, underscoring the location where the delivered goods are intended for use or inspection. The solicitation was posted on August 5, 2026, with a firm response deadline of August 17, 2026, leaving a twelve-day window for qualified subcontractors to submit proposals. The North American Industry Classification System code 332913 identifies the applicable manufacturing sector, indicating the work falls under other fabricated metal product manufacturing. The contract is classified as a subcontract under the Department of Defense, managed by the DDSP New Cumberland Facility, and no set-aside preferences are indicated, meaning open competition is permitted among eligible suppliers.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
Small Business Set-Aside Participation (WOSB/EDWOSB/SDVOSB)
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Labeling Services
Environmental Consulting Services

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
Manufacture and Supply of Electrical Heating Elements
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Packaging
Other Scientific and Technical Consulting Services

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details