Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

WIRE, ELECTRICAL

Active
SPE7M1-26-T-251BFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 8,250 feet of electrical wire identified by NSN 6145-00-948-9478 and part number SPE7M1-26-T-251B, with delivery required within 154 days to the DLA Distribution facility in New Cumberland, Pennsylvania. The wire must meet technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with configuration control governed by engineering change proposals and variance requests. The item is designated as a Critical Application Item and must comply with SAE AS22759/11A and AS22759E standards. Packaging must adhere to MIL-STD-2073-1E and preservation requirements per MIL-DTL-12000, with markings in accordance with MIL-STD-129. The wire must be supplied in continuous length if the advice code is 2N, 28, or 34; for advice codes 2P or 39, multiple unit packs are permissible, with the advice code overriding any conflicting schedule data. The material must originate from manufacturers listed on the Qualified Products List or Qualified Manufacturers List due to its status as a primary QPL/QML item. The delivery is FOB origin, with inspection and acceptance occurring at destination, and a quantity variance of plus or minus five percent is permitted. The contract includes specific packaging data, including unit containers, intermediate containers, and preservation methods, all detailed in prescribed codes. The solicitation number is SPE7M1-26-T-251B, with a response deadline of August 17, 2026, and the contracting officer is Alisha Blanton.

General Info

Procure 8,250 feet of electrical wire to New Cumberland, PA, within 154 days, meeting QPL, SAE, and MIL standards.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

331318 - Other Aluminum Rolling, Drawing, and ExtrudingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M1-26-T-251B for DLA Land and Maritime

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Alisha Blanton
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WIRE,ELECTRICAL
WIRE,ELECTRICAL:
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
500 FT/SPOOL, LENGTHS PER SPEC
THIS NSN IS LISTED AS A PRIMARY QPL OR QML THEREFORE
THE QUALIFIED PRODUCTS LIST OR QUALIFIED MANUFACTURERS
LIST IS APPLICABLE.
If Advice code is 2N, 28, or 34, this requirement is to provide material in continuous length. Multiple unit packs are unacceptable. Only continuous length will meet the requirement. If Advice code is 2P or 39, this requirement is to provide material in continuous length. Multiple unit packs are acceptable. Advice code (ADV) is located after the "For Government Use Only" heading under the Shipping Information. If there are inconsistencies between the schedule and Advice code, the Advice code takes precedence. **************************************************
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC NON GOVT STD SAE AS22759/11A REVISION NR A DTD 12/01/2015 PART PIECE NUMBER: M22759/11-24-90
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE AS22759E REVISION NR E DTD 07/01/2024 PART PIECE NUMBER:
SPE7M1-26-T-251B
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017603964 0001 FT 8,250.000
NSN/MATERIAL:6145009489478
DELIVERY (IN DAYS):0154
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 5% MINUS 5%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:500 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:O
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:XXX
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PRESERVATION AND PACKAGING SHALL BE IAW THE
LATEST REVISION OF MILITARY SPECIFICATION:
MIL-DTL-12000, FOR CABLE, CORD AND WIRE.
..
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE7M1-26-T-251B
SECTION B
PR: 7017603964 PRLI: 0001 CONT’D
Need Ship Date:01/19/2027 Original Required Delivery Date:12/28/2026
SPE7M1-26-T-251B NSN/Part Number: 6145-00-948-9478 Quantity: 8,250 FT Purchase Request: 7017603964QTY: 8250 Delivery: 154 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331318
New
DIBBS
NOZZLE, FUEL AND OIL
Solicitation # SPE8EE-26-T-2270
The contract pertains to the procurement of a fuel and oil nozzle with part number HM020-917-11 and NSN 4930-01-583-8673, supplied by ROBERTSON FUEL SYSTEMS, L.L.C., under solicitation SPE8EE-26-T-2270. A total of 11 units are required to be delivered FOB origin with zero variance allowed in quantity, and the delivery window is set at 167 days from the contract award, with an original required delivery date of April 12, 2027. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951, while also adhering strictly to MIL-STD-129 for marking and labeling, and RP001 for DLA-specific packaging requirements. The DLA Master List of Technical and Quality Requirements takes precedence over any other standards, and all technical and quality provisions referenced by R or I numbers are incorporated from the official DLA database. Sampling requirements mandate the use of MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise specified, and critical attributes are assigned verification level VII or an AQL of 0.1, with major and minor attributes at IV and II or AQLs of 1.0 and 4.0 respectively. The item is classified as a critical application item, and the contract includes specific guidance on unit of issue, palletization, and transportation procedures referencing DLAD Proc Notes C19 and C20. The delivery address is DLA Distribution’s New Cumberland Facility in Pennsylvania, and the solicitation is a total small business set-aside under NAICS code 331318 with a response deadline of August 17, 2026, and the point of contact for inquiries is Philip Ferrara of the Department of Defense.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M0-26-T-031U
The contract pertains to the procurement of electrical wire identified by NSN 6145-00-003-0731, with a requirement for 500 feet in continuous length, delivered in a single spool. The wire must comply with ANSI/NEMA HP3-2012 standards and be packaged in accordance with MIL-STD-2073-1E and MIL-DTL-12000 for preservation and packaging, marked per MIL-STD-129 with special coding ZZ-ZZ. Delivery is FOB origin within five days, with a strict quantity variance of plus 10 percent and no tolerance for underdelivery. The item is classified as a commercial item and is explicitly exempt from use of Class I ozone-depleting chemicals, overriding any conflicting specification requirements unless substitutes are pre-authorized. Configuration change management and variance requests are subject to formal engineering change proposals, and government identification must be removed from non-accepted supplies. The advice code 2L governs packaging, requiring continuous length, and this requirement supersedes any conflicting schedule details. The wire is designated a critical application item and is intended for delivery to Poland FMS Consolidation in Huntsville, AL, with transportation governed by DLAD procedure notes C19 and C20. The solicitation number is SPE7M0-26-T-031U, with full and open competition applicable, and the response deadline is August 17, 2026, under a federal procurement by the Department of Defense, Maritime Supply Chain ESOC Buys.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331318
New
DIBBS
COMPUTER SUBASSEMBL
Solicitation # SPE8EN-26-T-2788
The contract solicitation SPE8EN-26-T-2788 issued by the Defense Logistics Agency requires the delivery of four computer subassemblies identified by NSN 7050014916931, with a delivery schedule of 167 days after receipt of order, ultimately due by February 1, 2027. The item is to be delivered FOB origin to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and container types, while all markings and barcoding must adhere to MIL-STD-129 with no special markings required. The contractor is prohibited from intentionally introducing mercury or mercury-containing compounds into the hardware, except for limited functional uses such as batteries, fluorescent lamps, sensors, or weapon system components, and any portable mercury-containing devices must have shockproof construction and a secondary containment barrier as specified in NAVSEA 5100-003D. The contract incorporates a comprehensive set of Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses covering cybersecurity, including mandatory compliance with CMMC Level 2 self-assessment and safeguarding covered defense information under DFARS 252.204-7012, as well as requirements for electronic payment submissions via WAWF, hazardous material labeling per 29 CFR 1910.1200, prohibitions on hexavalent chromium and Communist Chinese military company equipment, and adherence to employment equity and anti-trafficking standards. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with the revision in effect on the solicitation issue date controlling. The contract allows zero variance in quantity, no options are included, and no unit pricing is disclosed, though payment will be processed through WAWF upon successful delivery and acceptance. Offerors must possess a valid UEI and CAGE code, comply with SAM registration requirements, and submit proposals exclusively through the DLA Internet Bid Board System by the August 17, 2026 deadline.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331318
New
DIBBS
FAN, TUBEAXIAL
Solicitation # SPE8E7-26-T-3469
The Defense Logistics Agency is soliciting the procurement of 10 tubeaxial fans under solicitation SPE8E7-26-T-3469, with a delivery requirement of 193 days after contract award to the DDSP New Cumberland Facility in Pennsylvania. The item, identified by NSN 4140-01-092-0807, must comply with rigorous technical, quality, and cybersecurity standards as defined in the DLA Master List of Technical and Quality Requirements and referenced DFARS clauses. The contract mandates adherence to CMMC Level 2 certification, requiring the contractor to be a certified third-party assessment organization with implemented cybersecurity controls aligned with NIST SP 800-171. Technical data associated with the product is subject to export control under ITAR or EAR, and access is restricted to contractors approved under the US/Canada Joint Certification Program who have completed mandatory DLA export control training and questionnaires. The contractor must also comply with stringent packaging and labeling requirements per ASTM D3951, MIL-STD-129, and RP001, including hazardous material labeling under 29 CFR 1910.1200 and barcoding for DoD logistics tracking. Inspection and acceptance of the product occur at the origin, with the Government retaining full authority to verify conformance against ISO 9001:2015 quality systems, MIL-STD-1916 inspection methodologies, and applicable technical drawings, requiring zero non-conformances unless otherwise specified. The contract incorporates a comprehensive suite of FAR and DFARS clauses addressing cybersecurity, trafficking in persons, employment eligibility verification, sustainable products, hazardous materials, export controls, and subcontractor requirements, with deviations applied to ensure alignment with agency-specific mandates. Payment must be submitted via Wide Area WorkFlow, and the contractor must provide a Unique Entity Identifier and CAGE code for itself and any subcontractors, while also declaring its small business status and socioeconomic certifications if applicable. FOB terms designate origin as the point of risk transfer, and all contractual obligations are governed by a fixed-price structure under which the Government retains control over inspection, acceptance, and compliance verification.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331318
New
DIBBS
SPRING, HELICAL, EXTENSI
Solicitation # SPE7L1-26-T-916N
The contract is for a single helical extension spring, identified by NSN 5360011419523 and part number 15737, under solicitation SPE7L1-26-T-916N, with a delivery requirement of 20 days after order receipt and an original delivery date of August 3, 2026. The item is to be delivered FOB destination to the USS GEORGE WASHINGTON CVN 73 at FPO AP 96607, with inspection and acceptance occurring at the delivery point. The contract value is $1.00 per unit, with no quantity variance allowed. All packaging must comply with MIL-STD-2073-1E, using preservation method 42 (clean and dry), unit container D3, intermediate container E5, and packaging code U, with palletization adhering to DLA’s RP001 requirements. Labeling must conform to MIL-STD-129, with no special marking required. The supply is subject to strict mercury restrictions—no intentional addition or direct contact with mercury or mercury-containing compounds, except for specified functional uses such as batteries, fluorescent lamps, sensors, or weapon systems, which must include a secondary containment barrier per NAVSEA 5100-003D. Electronic invoicing is mandatory via WAWF, and the contractor must comply with all applicable security protocols including NIST SP 800-171 for safeguarding covered defense information and cyber incident reporting. The contract incorporates numerous FAR and DFARS clauses governing contract type, changes, subcontracting, small business representation, hazardous materials, trafficking in persons, employment eligibility, sustainable products, and cybersecurity, with deviations noted for clauses issued under 2026-00038. Offerors must maintain a valid Unique Entity Identifier and submit proposals exclusively via the DLA Internet Bid Board System by the August 17, 2026 deadline. No options, ceiling values, or additional line items are included, and the procurement is conducted under simplified acquisition procedures with no set-aside type specified.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M2-26-T-6038
This contract specifies the procurement of electrical wire identified by NSN 6145-01-060-7863, with a total quantity of 7,946 linear feet divided across three contract line items of 1,913 feet, 2,533 feet, and 3,500 feet respectively. The wire must conform to SAE AS22759E and TDP Rev B Gen 3 standards with part number M22759/16-18-9, and compliance with MIL-DTL-12000 for preservation and packaging is required. Each unit of issue is a 500-foot spool, and packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, with marking in accordance with MIL-STD-129 and no special marking applied. Delivery is FOB origin with a 14-day lead time and a permissible quantity variance of plus or minus five percent, with inspection and acceptance occurring at the destination. The wire must be furnished in continuous length based on advice codes, and no mercury or mercury-containing compounds may be intentionally added or come in direct contact with the material except for specific exceptions like batteries or instruments meeting NAVSEA 5100-003D guidelines. The item is classified as a commercial item and is subject to the Qualified Products List or Qualified Manufacturers List requirements. It is designated as a critical application item requiring strict configuration control, and any deviations must be formally requested through an Engineering Change Proposal or variance process. Deliveries are to be sent to three DLA distribution centers located in Robins AFB Georgia, New Cumberland Pennsylvania, and Hill AFB Utah, with shipment deadlines ranging from September 2026 to May 2028, though the original required delivery date is uniformly March 27, 2027. Contract data indicates the solicitation was issued under SPE7M2-26-T-6038 with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Nuclear Reactor Program.
NUCLEAR REACTOR PROGRAM

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331318
New
Federal
Supply of 4" x 4" x 1/4" 6061-T6 Aluminum Square TubeThe contract requires the supply of four units of 4-foot-long 4-inch by 4-inch by 1/4-inch wall thickness aluminum square tubing made from 6061-T6 alloy or an acceptable domestic equivalent. The material specification is critical, as 6061-T6 is a high-strength, heat-treatable aluminum known for its excellent corrosion resistance and weldability, commonly used in structural applications requiring durability and precision. The tubing must meet exact dimensional and material standards to ensure compatibility with the recipient’s operational needs. The acquisition is classified as a subcontract under NAICS code 331318, which pertains to aluminum extrusion, indicating the work involves specialized manufacturing processes. The solicitation was posted on August 4, 2026, with a response deadline of August 11, 2026, at 8:00 PM Eastern Time, leaving a limited window for submissions. The place of performance is designated as Oak Ridge, Tennessee, with a zip code of 37830, suggesting the material will be delivered directly to a Department of Energy facility operated by ORNL UT-Battelle LLC. As a DOE contractor, the organization is likely utilizing the tubing for research, development, or infrastructure projects where material integrity is paramount. No set-aside provisions are specified, meaning the contract is open to any qualified supplier regardless of business size or designation.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 331318
New
Federal
Supply of 6" x 2" x 1/4" 6061 Aluminum Rectangle TubeThe contract calls for the supply of two units of 4-foot-long 6-inch by 2-inch by 1/4-inch 6061 aluminum rectangle tube or a domestic equivalent, ensuring material compatibility and performance standards. The specification mandates the use of 6061 aluminum, a widely recognized alloy valued for its strength, weldability, and corrosion resistance, making it suitable for structural and mechanical applications. Each tube is dimensioned precisely to meet engineering requirements, and the quantity is limited to two units, indicating a targeted procurement for specific project needs. The solicitation is classified as a subcontract under NAICS code 331318, which corresponds to aluminum ingot and alloy manufacturing, and is issued by Oak Ridge-based ORNL UT-Battelle LLC, a Department of Energy contractor. The place of performance is designated as Oak Ridge, Tennessee, with a 37830 ZIP code, suggesting the material will be delivered directly to a DOE-affiliated facility. The response deadline is set for August 11, 2026, at 8:00 PM Eastern Time, with the opportunity posted on August 4, 2026, providing a one-week window for submissions. No set-aside designation or specific point of contact is indicated, and the procurement is open to qualified suppliers able to meet the technical and delivery requirements without additional constraints.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 331318
New
Federal
Supply of 6" x 4" x 1/2" 6061 Aluminum Rectangle TubeThe contract calls for the supply of four units of 24-foot-long aluminum rectangle tubing with dimensions of 6 inches by 4 inches by 1/2 inch, manufactured from 6061-T6 aluminum or a qualifying domestic equivalent. The material must meet specified mechanical and chemical properties associated with the 6061-T6 temper, ensuring suitability for structural or high-performance applications. The place of performance is designated as Oak Ridge, Tennessee, with a zip code of 37830, indicating delivery must be made to that location. The solicitation is classified as a subcontract under NAICS code 331318, which corresponds to aluminum tube and pipe manufacturing, suggesting the work falls under industrial fabrication and supply rather than direct government procurement. The posting date for this solicitation is August 4, 2026, with a response deadline of August 11, 2026, at 8:00 PM Eastern Time, leaving a one-week window for interested parties to submit proposals. The contracting organization is ORNL UT-Battelle LLC, a Department of Energy contractor, which implies the end use of the tubing may be tied to federal research, energy, or laboratory operations. There is no set-aside designation specified, meaning the opportunity is open to all eligible contractors without preference for small businesses or other categories. All submissions must comply with the material specifications and delivery requirements outlined in the solicitation, and failure to meet the deadline or quality standards will result in disqualification.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 331318
New
Federal
Aluminum Tubes, Plates, and Pipping Needs
Solicitation # PR457594
ORNL is seeking quotations for a range of aluminum materials required for technical applications, all governed under the Brand Name or Equal provision to allow for domestic equivalents. The solicitation calls for specific dimensions and tempers of 6061 aluminum products including rectangular and square tubes such as a 6-inch by 4-inch by half-inch tube, a 6-inch by 2-inch by quarter-inch tube, and a 4-inch by 4-inch by quarter-inch square tube, along with various thicknesses of 6061-T6 and 6061-T651 aluminum plates ranging from one-eighth inch to one and one-half inches, including two distinct listings for the one-eighth inch sheet. Additionally, a 4-inch schedule 80 aluminum pipe with a 4.50-inch outer diameter and a 0.337-inch wall thickness is required. All items must meet the specified alloy and temper standards without exception. The solicitation, identified as PR457594, was posted on August 4, 2026, and responses are due by August 11, 2026, with performance to be delivered to Oak Ridge, Tennessee. The request is issued by ORNL Ut-Battelle LLC, a Department of Energy contractor, and inquiries should be directed to Maureen Nanstad at the provided email address.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 331318
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7M4-26-T-276C
The contract solicitation SPE7M4-26-T-276C seeks 965 helical compression springs identified by NSN 5360-00-371-0159, classified as a commercial item under the NAICS code 331318. Delivery is required to the Arizona Industries for the Blind in Phoenix, AZ 85043, with an FOB Destination term and a need ship date of January 30, 2029, and original delivery date of April 23, 2029. The contractor must comply with comprehensive packaging, preservation, and marking standards per MIL-STD-2073-1E and MIL-STD-129, including specific container types, preservation methods, and machine-readable bar coding. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via RP001 and RA001, and all items are subject to destination inspection and acceptance by the Government under FAR 52.246-1. Payment must be processed electronically via Wide Area WorkFlow, and invoice documentation must conform to approved types such as Invoice and Receiving Report or Invoice2in1. The solicitation mandates strict compliance with a broad suite of FAR and DFARS clauses, including cybersecurity safeguards under 252.204-7012, prohibition of hexavalent chromium, restrictions on covered defense telecommunications equipment, whistleblower protections, and requirements for safeguarding government personnel work product. Subcontracting is subject to a deviation allowing commercial subcontracting under 252.244-7999, and NIST SP 800-171 assessment requirements apply with a documented deviation. Offerors must certify their Small Business status and socioeconomic designations, disclose UEI and CAGE codes, and provide hazard communication data for any hazardous materials, including Safety Data Sheets compliant with OSHA regulations. All proposals must be submitted through the DIBBS portal by August 6, 2026, and award is expected to follow a Lowest Price Technically Acceptable approach based on mandatory compliance with technical, regulatory, and socioeconomic criteria, with no formal weighting of technical factors. No pricing data is provided in the solicitation, and the final contract type remains unspecified pending award.
FLUID HANDLING DIVISION

POSTED

3 days ago

DEADLINE

in about 7 hours
View Details
NAICS: 331318
New
DIBBS
CABLE, POWER, ELECTRI
Solicitation # SPE7M1-26-T-247K
The contract specifies the procurement of 500 feet of continuous electrical cable, identified by NSN 6145013810311 and part number 44A1121-18-0/9-9-US, with a strict requirement for a single unbroken length unless the advice code indicates otherwise; advice codes 2N, 28, or 34 mandate continuous length with no multiple unit packs, while 2P or 39 permit multiple unit packs. The cable must comply with all DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951 packaging standards, and must be labeled and marked per MIL-STD-129 with unit of issue and quantity per unit pack conforming to the contract. Packaging and palletization must adhere to RP001 DLA Packaging Requirements, and the item is classified as a critical application item. Delivery is FOB origin, with an acceptance and inspection point at destination, within 149 days from contract award, allowing a quantity variance of plus or minus 5 percent. The ship date is set for January 11, 2027, and the delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania. The solicitation number is SPE7M1-26-T-247K, issued under a federal procurement with NAICS code 331318, and the primary point of contact is Alisha Blanton of the Department of Defense’s Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 488999
New
DIBBS
Government-Arranged Transportation (First Destination Transportation - FDT)The contractor is tasked with preparing and packaging an impeller for government-arranged sea transport under the Department of Defense’s First Destination Transportation program, ensuring full compliance with military logistics standards. This work requires precise handling and packaging procedures tailored to secure military transport requirements, with the impeller destined for delivery via sea under the supervision of the Maritime Supply Chain branch. The contract is structured as a subcontract under the NAICS code 488999, indicating it pertains to other support activities for transportation, and all activities must align with the stringent protocols enforced by the Department of Defense for defense-related cargo. The solicitation was posted on August 5, 2026, and responses are due by August 12, 2026, with no specific set-aside classification indicated. Although no organizational address or point of contact details are provided, the work must be performed in accordance with the specifications outlined by the DLA’s FDT program, and the contract is accessible via the DIBBS platform. The contractor must ensure all packaging, labeling, documentation, and readiness for sea transport meet the operational and security demands of military logistics, with no flexibility in adherence to established standards.
All Other Support Activities for Transportation

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423840
New
DIBBS
Domestic Supply Chain Compliance and ReportingAll materials used in production must be sourced exclusively from U.S. or designated foreign countries to ensure compliance with FAR and DFARS regulations, with full documentation maintained to verify origin and traceability throughout the supply chain. The subcontract requires strict adherence to domestic sourcing requirements and demands rigorous recordkeeping to demonstrate adherence to federal procurement standards. This contract is issued by the Department of Defense through the Maritime Supply Chain office and is open for response until August 12, 2026, with materials classified under NAICS code 423840 related to wholesale trade of miscellaneous durable goods. Failure to provide accurate documentation or source non-compliant materials will result in nonconformance and potential contract termination.
Industrial Supplies Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332112
New
DIBBS
Precision Machining of Centrifugal Pump ImpellerThe contract calls for the manufacture of two precision centrifugal pump impellers designed for critical applications requiring strict compliance with military or industrial specifications. This subcontract is part of the Department of Defense’s Maritime Supply Chain initiative and is classified under NAICS code 332112, indicating it falls within the precision machining and manufacturing sector for pumps and pumping equipment. The impellers must meet exacting quality and performance standards to ensure reliable operation in demanding environments, where failure is not an option. All work must be completed to stringent technical requirements without deviation, emphasizing dimensional accuracy, material integrity, and surface finish. The solicitation was posted on August 5, 2026, with a firm deadline for responses on August 12, 2026, leaving a limited window for qualified subcontractors to submit proposals. The place of performance and point of contact details are not specified, suggesting the contractor may have flexibility in location but must still meet all delivery and certification benchmarks. The contract is accessible through the DIBBS platform, and interested parties must ensure full alignment with the technical and compliance demands outlined in the full RFQ to be considered for award. There is no set-aside designation, meaning any eligible supplier may bid regardless of business size or ownership characteristics.
Nonferrous Forging

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
New
DIBBS
Data retrieval failure — no sub-opportunities identifiableData retrieval for the prime contract has failed, preventing identification of any subcontract opportunities linked to this solicitation. The posting date is August 5, 2026, with a response deadline of August 17, 2026, and the opportunity is categorized as a subcontract under the Maritime Supply Chain agency within the Department of Defense. The place of performance is listed as Robins AFB with a zip code of 31098-1887, though no city, state, or country details are provided for the office address or point of contact. No solicitation number, NAICS code, set-aside type, or organization type is available, and the official link to the solicitation is accessible via the DIBBS platform.

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 488510
New
DIBBS
Transportation and FDT Logistics Coordination
Freight Transportation Arrangement

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and First Article Testing (FAI)
Engineering Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561990
New
DIBBS
Military Packaging and Labeling Services
All Other Support Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 423520
New
DIBBS
Aluminum Material Supply
Coal and Other Mineral and Ore Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332721
New
DIBBS
Precision Machining of Aerospace Fittings
Precision Turned Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
Aluminum Tube Nipple Manufacturing
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541620
New
DIBBS
Level III Certification Oversight (NDT or Welding)
Environmental Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541690
New
DIBBS
Quality Compliance and Certification Documentation
Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details