Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

WIRE, ELECTRICAL

Active
SPE7M1-26-T-247DFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicitation SPE7M1-26-T-247D seeks 480 feet of electrical wire, identified by NSN 6145-01-383-3897, with a permitted quantity variance of up to +10% no less than 0%, allowing delivery of up to 528 feet. The item must conform to the technical specification SAE AS81044B Revision B dated July 1, 2019, and be supplied in continuous lengths as dictated by the Advice Code 2G, which supersedes any conflicting schedule requirements. The wire shall be packaged in accordance with MIL-STD-2073-1E and preserved per MIL-DTL-12000, utilizing a dry storage condition and unspecified preservation and packaging materials indicated by "ZZ" codes, with a unit pack size of 500 feet and a packaging code of "U." Marking requirements are strictly aligned with MIL-STD-129, including standardized GS1-128 barcoding on both shipping containers and unit packages, with special marking code ZZ–ZZ indicating unspecified additional requirements. Delivery must be made FOB origin in 20 days to the Naval Sea Logistics Center at Keyport, Washington, using traceable freight methods—parcel post is prohibited. The government will inspect and accept the material at destination, enforcing compliance with Qualified Products List or Qualified Manufacturers List requirements. The contract value is estimated at $480 for the base quantity, with a maximum potential value of $528, and payment will be processed electronically through Wide Area WorkFlow (WAWF). The solicitation is a full and open competition under NAICS code 331318 and is issued by Defense Logistics Agency’s Maritime Supply Chain on behalf of the Department of Defense, with proposals due by August 14, 2026 via the DIBBS portal. Multiple FAR and DFARS clauses are incorporated, including those on combating trafficking in persons, employment eligibility verification, sustainable products, hazardous material identification, cybersecurity assessments per NIST SP 800-171, and transportation by sea. Offerors must provide valid UEI and CAGE codes and certify size status and socioeconomic categories such as small business, HUBZone, SDVOSB, WOSB, or EDWOSB where applicable, with joint venture participants required to disclose the UEI of each party

General Info

Procure 480 feet of SAE AS81044B-compliant electrical wire for Naval Undersea Warfare Center, delivery by July 31, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

331318 - Other Aluminum Rolling, Drawing, and ExtrudingView NAICS

Place of Performance

610 DOWELL STREET, KEYPORT, WA, 98345-7610, US

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE7M1-26-T-247D

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Alisha Blanton
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WIRE,ELECTRICAL
WIRE,ELECTRICAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
500 FT/SPOOL, 100 FT MINIMUM LENGTHS
THIS NSN IS LISTED AS A PRIMARY QPL OR QML THEREFORE
THE QUALIFIED PRODUCTS LIST OR QUALIFIED MANUFACTURERS
LIST IS APPLICABLE.
FULL AND OPEN COMPETITION APPLIES.
If Advice code is 2N, 28, or 34, this requirement is to provide material in continuous length. Multiple unit packs are unacceptable. Only continuous length will meet the requirement. If Advice code is 2P or 39, this requirement is to provide material in continuous length. Multiple unit packs are acceptable. Advice code (ADV) is located after the "For Government Use Only" heading under the Shipping Information. If there are inconsistencies between the schedule and Advice code, the Advice code takes precedence. **************************************************
TDP Rev A Gen 1 IAW BASIC NON GOVT STD SAE AS81044/12 (R 2022) REVISION NR A DTD 12/01/2011 PART PIECE NUMBER: M81044/12-20-93
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE AS81044B REVISION NR B DTD 07/01/2019 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to
SPE7M1-26-T-247D
SECTION B
PR: 7017664584 PRLI: 0001 CONT’D
determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017664584 0001 FT 480.000
NSN/MATERIAL:6145013833897
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:500 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:XXX
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PRESERVATION AND PACKAGING SHALL BE IAW THE
LATEST REVISION OF MILITARY SPECIFICATION:
MIL-DTL-12000, FOR CABLE, CORD AND WIRE.
..
PARCEL POST ADDRESS:
N00253
NAVAL UNDERSEA WARFARE CENTER
DIVISION KEYPORT NWCF
610 DOWELL STREET
KEYPORT WA 98345-7610
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N00253
NUWC DIVISION KEYPORT
NAVAL SEA LOGISTICS CENTER
610 DOWELL STREET, BLDG 893
KEYPORT WA 98345-7610
US
M/F: (TCN) N0025362097D38
RDD: 239
PROJ: 3AD TP 2
SUPP ADD: N00253 SIG: A
SPE7M1-26-T-247D
SECTION B
PR: 7017664584 PRLI: 0001 CONT’D
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: 2G FC: EJ
Need Ship Date:00/00/0000 Original Required Delivery Date:07/31/2026
SPE7M1-26-T-247D NSN/Part Number: 6145-01-383-3897 Quantity: 480 FT Purchase Request: 7017664584QTY: 480 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331318
New
DIBBS
NOZZLE, FUEL AND OIL
Solicitation # SPE8EE-26-T-2270
The contract pertains to the procurement of a fuel and oil nozzle with part number HM020-917-11 and NSN 4930-01-583-8673, supplied by ROBERTSON FUEL SYSTEMS, L.L.C., under solicitation SPE8EE-26-T-2270. A total of 11 units are required to be delivered FOB origin with zero variance allowed in quantity, and the delivery window is set at 167 days from the contract award, with an original required delivery date of April 12, 2027. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951, while also adhering strictly to MIL-STD-129 for marking and labeling, and RP001 for DLA-specific packaging requirements. The DLA Master List of Technical and Quality Requirements takes precedence over any other standards, and all technical and quality provisions referenced by R or I numbers are incorporated from the official DLA database. Sampling requirements mandate the use of MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise specified, and critical attributes are assigned verification level VII or an AQL of 0.1, with major and minor attributes at IV and II or AQLs of 1.0 and 4.0 respectively. The item is classified as a critical application item, and the contract includes specific guidance on unit of issue, palletization, and transportation procedures referencing DLAD Proc Notes C19 and C20. The delivery address is DLA Distribution’s New Cumberland Facility in Pennsylvania, and the solicitation is a total small business set-aside under NAICS code 331318 with a response deadline of August 17, 2026, and the point of contact for inquiries is Philip Ferrara of the Department of Defense.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331318
New
DIBBS
COMPUTER SUBASSEMBL
Solicitation # SPE8EN-26-T-2788
The contract solicitation SPE8EN-26-T-2788 issued by the Defense Logistics Agency requires the delivery of four computer subassemblies identified by NSN 7050014916931, with a delivery schedule of 167 days after receipt of order, ultimately due by February 1, 2027. The item is to be delivered FOB origin to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and container types, while all markings and barcoding must adhere to MIL-STD-129 with no special markings required. The contractor is prohibited from intentionally introducing mercury or mercury-containing compounds into the hardware, except for limited functional uses such as batteries, fluorescent lamps, sensors, or weapon system components, and any portable mercury-containing devices must have shockproof construction and a secondary containment barrier as specified in NAVSEA 5100-003D. The contract incorporates a comprehensive set of Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses covering cybersecurity, including mandatory compliance with CMMC Level 2 self-assessment and safeguarding covered defense information under DFARS 252.204-7012, as well as requirements for electronic payment submissions via WAWF, hazardous material labeling per 29 CFR 1910.1200, prohibitions on hexavalent chromium and Communist Chinese military company equipment, and adherence to employment equity and anti-trafficking standards. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with the revision in effect on the solicitation issue date controlling. The contract allows zero variance in quantity, no options are included, and no unit pricing is disclosed, though payment will be processed through WAWF upon successful delivery and acceptance. Offerors must possess a valid UEI and CAGE code, comply with SAM registration requirements, and submit proposals exclusively through the DLA Internet Bid Board System by the August 17, 2026 deadline.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331318
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE8E7-26-T-3469
The contract solicits ten tube axial fans under NSN 0001S00000061 for delivery within 193 days after award, with a purchase request number of 7017758323. The procurement is governed by the Defense Logistics Agency’s technical and quality requirements referenced from the DLA Master List, with compliance determined by the revision in effect on the solicitation or award date depending on the acquisition size. The item is subject to strict export control under ITAR or EAR, prohibiting unauthorized disclosure of associated technical data to foreign persons anywhere in the world, including foreign nationals employed by U.S. firms. Access to this data is restricted to contractors with an approved U.S./Canada Joint Certification Program status, completion of mandatory DOD export control training, and formal authorization from DLA. Additional quality requirements include inspection and acceptance at origin, removal of government identification from non-accepted items, and adherence to DLA packaging standards. The contracting office is the DDSP New Cumberland Facility, with Kelly Mitchell listed as the primary point of contact, and the place of performance is New Cumberland, Pennsylvania. The solicitation is under the NAICS code 331318, and bidders must be certified at CMMC Level 2 as a third-party assessment organization to be eligible. The solicitation opened on August 5, 2026, with responses due by August 17, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331318
New
DIBBS
SPRING, HELICAL, EXTENSI
Solicitation # SPE7L1-26-T-916N
The contract calls for one helical extension spring with NSN 5360-01-141-9523 and purchase request number 7017744422, to be delivered in a single unit to the USS GEORGE WASHINGTON CVN 73 at FPO AP 96607, with delivery required within 20 days of award under FOB destination terms. The item must comply with all DLA packaging requirements per RP001 and MIL-STD-2073-1E, including specific packaging methods, materials, and marking standards per MIL-STD-129 with no special marking codes. The spring must be free from intentional addition of mercury or mercury-containing compounds, except for permitted uses such as functional components in batteries, lighting, instruments, sensors, controls, weapon systems, or specified chemical reagents, with portable devices containing mercury requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. All technical and quality specifications referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. The contract is issued under solicitation SPE7L1-26-T-916N with an original required delivery date of August 3, 2026, and includes transportation instructions per DLAD Proc Notes C19 and C20, with shipment coordinated via VSM and DD Form for government use.
LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331318
New
Federal
Supply of 4" x 4" x 1/4" 6061-T6 Aluminum Square TubeThe contract requires the supply of four units of 4-foot-long 4-inch by 4-inch by 1/4-inch wall thickness aluminum square tubing made from 6061-T6 alloy or an acceptable domestic equivalent. The material specification is critical, as 6061-T6 is a high-strength, heat-treatable aluminum known for its excellent corrosion resistance and weldability, commonly used in structural applications requiring durability and precision. The tubing must meet exact dimensional and material standards to ensure compatibility with the recipient’s operational needs. The acquisition is classified as a subcontract under NAICS code 331318, which pertains to aluminum extrusion, indicating the work involves specialized manufacturing processes. The solicitation was posted on August 4, 2026, with a response deadline of August 11, 2026, at 8:00 PM Eastern Time, leaving a limited window for submissions. The place of performance is designated as Oak Ridge, Tennessee, with a zip code of 37830, suggesting the material will be delivered directly to a Department of Energy facility operated by ORNL UT-Battelle LLC. As a DOE contractor, the organization is likely utilizing the tubing for research, development, or infrastructure projects where material integrity is paramount. No set-aside provisions are specified, meaning the contract is open to any qualified supplier regardless of business size or designation.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331318
New
Federal
Supply of 6" x 2" x 1/4" 6061 Aluminum Rectangle TubeThe contract calls for the supply of two units of 4-foot-long 6-inch by 2-inch by 1/4-inch 6061 aluminum rectangle tube or a domestic equivalent, ensuring material compatibility and performance standards. The specification mandates the use of 6061 aluminum, a widely recognized alloy valued for its strength, weldability, and corrosion resistance, making it suitable for structural and mechanical applications. Each tube is dimensioned precisely to meet engineering requirements, and the quantity is limited to two units, indicating a targeted procurement for specific project needs. The solicitation is classified as a subcontract under NAICS code 331318, which corresponds to aluminum ingot and alloy manufacturing, and is issued by Oak Ridge-based ORNL UT-Battelle LLC, a Department of Energy contractor. The place of performance is designated as Oak Ridge, Tennessee, with a 37830 ZIP code, suggesting the material will be delivered directly to a DOE-affiliated facility. The response deadline is set for August 11, 2026, at 8:00 PM Eastern Time, with the opportunity posted on August 4, 2026, providing a one-week window for submissions. No set-aside designation or specific point of contact is indicated, and the procurement is open to qualified suppliers able to meet the technical and delivery requirements without additional constraints.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331318
New
Federal
Supply of 6" x 4" x 1/2" 6061 Aluminum Rectangle TubeThe contract calls for the supply of four units of 24-foot-long aluminum rectangle tubing with dimensions of 6 inches by 4 inches by 1/2 inch, manufactured from 6061-T6 aluminum or a qualifying domestic equivalent. The material must meet specified mechanical and chemical properties associated with the 6061-T6 temper, ensuring suitability for structural or high-performance applications. The place of performance is designated as Oak Ridge, Tennessee, with a zip code of 37830, indicating delivery must be made to that location. The solicitation is classified as a subcontract under NAICS code 331318, which corresponds to aluminum tube and pipe manufacturing, suggesting the work falls under industrial fabrication and supply rather than direct government procurement. The posting date for this solicitation is August 4, 2026, with a response deadline of August 11, 2026, at 8:00 PM Eastern Time, leaving a one-week window for interested parties to submit proposals. The contracting organization is ORNL UT-Battelle LLC, a Department of Energy contractor, which implies the end use of the tubing may be tied to federal research, energy, or laboratory operations. There is no set-aside designation specified, meaning the opportunity is open to all eligible contractors without preference for small businesses or other categories. All submissions must comply with the material specifications and delivery requirements outlined in the solicitation, and failure to meet the deadline or quality standards will result in disqualification.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331318
New
Federal
Aluminum Tubes, Plates, and Pipping Needs
Solicitation # PR457594
ORNL is seeking quotations for a range of aluminum materials required for technical applications, all governed under the Brand Name or Equal provision to allow for domestic equivalents. The solicitation calls for specific dimensions and tempers of 6061 aluminum products including rectangular and square tubes such as a 6-inch by 4-inch by half-inch tube, a 6-inch by 2-inch by quarter-inch tube, and a 4-inch by 4-inch by quarter-inch square tube, along with various thicknesses of 6061-T6 and 6061-T651 aluminum plates ranging from one-eighth inch to one and one-half inches, including two distinct listings for the one-eighth inch sheet. Additionally, a 4-inch schedule 80 aluminum pipe with a 4.50-inch outer diameter and a 0.337-inch wall thickness is required. All items must meet the specified alloy and temper standards without exception. The solicitation, identified as PR457594, was posted on August 4, 2026, and responses are due by August 11, 2026, with performance to be delivered to Oak Ridge, Tennessee. The request is issued by ORNL Ut-Battelle LLC, a Department of Energy contractor, and inquiries should be directed to Maureen Nanstad at the provided email address.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331318
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7M4-26-T-276C
The contract solicitation SPE7M4-26-T-276C seeks 965 helical compression springs identified by NSN 5360-00-371-0159, classified as a commercial item under the NAICS code 331318. Delivery is required to the Arizona Industries for the Blind in Phoenix, AZ 85043, with an FOB Destination term and a need ship date of January 30, 2029, and original delivery date of April 23, 2029. The contractor must comply with comprehensive packaging, preservation, and marking standards per MIL-STD-2073-1E and MIL-STD-129, including specific container types, preservation methods, and machine-readable bar coding. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via RP001 and RA001, and all items are subject to destination inspection and acceptance by the Government under FAR 52.246-1. Payment must be processed electronically via Wide Area WorkFlow, and invoice documentation must conform to approved types such as Invoice and Receiving Report or Invoice2in1. The solicitation mandates strict compliance with a broad suite of FAR and DFARS clauses, including cybersecurity safeguards under 252.204-7012, prohibition of hexavalent chromium, restrictions on covered defense telecommunications equipment, whistleblower protections, and requirements for safeguarding government personnel work product. Subcontracting is subject to a deviation allowing commercial subcontracting under 252.244-7999, and NIST SP 800-171 assessment requirements apply with a documented deviation. Offerors must certify their Small Business status and socioeconomic designations, disclose UEI and CAGE codes, and provide hazard communication data for any hazardous materials, including Safety Data Sheets compliant with OSHA regulations. All proposals must be submitted through the DIBBS portal by August 6, 2026, and award is expected to follow a Lowest Price Technically Acceptable approach based on mandatory compliance with technical, regulatory, and socioeconomic criteria, with no formal weighting of technical factors. No pricing data is provided in the solicitation, and the final contract type remains unspecified pending award.
FLUID HANDLING DIVISION

POSTED

2 days ago

DEADLINE

in about 16 hours
View Details
NAICS: 331318
New
DIBBS
CABLE, POWER, ELECTRI
Solicitation # SPE7M1-26-T-247K
The contract specifies the procurement of 500 feet of continuous electrical cable, identified by NSN 6145013810311 and part number 44A1121-18-0/9-9-US, with a strict requirement for a single unbroken length unless the advice code indicates otherwise; advice codes 2N, 28, or 34 mandate continuous length with no multiple unit packs, while 2P or 39 permit multiple unit packs. The cable must comply with all DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951 packaging standards, and must be labeled and marked per MIL-STD-129 with unit of issue and quantity per unit pack conforming to the contract. Packaging and palletization must adhere to RP001 DLA Packaging Requirements, and the item is classified as a critical application item. Delivery is FOB origin, with an acceptance and inspection point at destination, within 149 days from contract award, allowing a quantity variance of plus or minus 5 percent. The ship date is set for January 11, 2027, and the delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania. The solicitation number is SPE7M1-26-T-247K, issued under a federal procurement with NAICS code 331318, and the primary point of contact is Alisha Blanton of the Department of Defense’s Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 331318
New
DIBBS
MAGNET WIRE
Solicitation # SPE7M1-26-T-247J
The contract is for the procurement of magnet wire, identified by NSN 6145-00-937-8406 and part number MW016CHX000012NNC, with a requirement for three reels, each containing 75 pounds of continuous electrical wire. The wire must comply with NEMA MW1000 Revision NR dated January 1, 2025, and be packaged and preserved per MIL-DTL-12000 and MIL-STD-2073-1E, with marking in accordance with MIL-STD-129. No mercury or mercury-containing compounds may be intentionally added or come in direct contact with the product, except for functional uses in specified items like batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA; portable devices containing mercury must be shockproof and include a secondary containment. The unit of issue is a reel, and delivery must occur within 95 days from contract award, shipped FOB origin with zero variance allowed in quantity. Inspection and acceptance occur at the destination, with preservation methods defined as ZZ and packaging code U. The delivery address is DLA Distribution San Joaquin in Tracy, California, and the contract references DLA Procurement Notes C19 and C20 for transportation requirements. The advice code determines whether continuous length is mandatory or if multiple unit packs are acceptable, with the advice code superseding any conflicting schedule data. Full and open competition applies, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions or RFP issue date for larger ones, unless an amendment supersedes it. The contract was posted on August 3, 2026, with responses due by August 14, 2026, and is issued under a DoD procurement with a NAICS code of 331318.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 331318
New
DIBBS
WIRE, ELECTRICAL
Solicitation # SPE7M1-26-T-246S
The contract requires the supply of 2,000 feet of electrical wire in two continuous 500-foot spools, with the NSN part number 6145-01-384-4306, under solicitation SPE7M1-26-T-246S. The delivery schedule mandates fulfillment within 292 days after order placement, and all supplies must comply with DLA packaging requirements and technical/quality standards outlined in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. For simplified acquisitions, the applicable revision of the master list is determined by the solicitation issue or award date, while larger acquisitions adhere to the RFP issue date unless revised by an amendment. The contractor must ensure all non-accepted supplies have government identification removed prior to delivery. No data is currently available for the item, so the alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, under NAICS code 331318, managed by the Department of Defense’s Maritime Supply Chain through the DLA office, with performance required at New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Alisha Blanton, reachable via email and phone.
MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 488999
New
DIBBS
Government-Arranged Transportation (First Destination Transportation - FDT)The contractor is tasked with preparing and packaging an impeller for government-arranged sea transport under the Department of Defense’s First Destination Transportation program, ensuring full compliance with military logistics standards. This work requires precise handling and packaging procedures tailored to secure military transport requirements, with the impeller destined for delivery via sea under the supervision of the Maritime Supply Chain branch. The contract is structured as a subcontract under the NAICS code 488999, indicating it pertains to other support activities for transportation, and all activities must align with the stringent protocols enforced by the Department of Defense for defense-related cargo. The solicitation was posted on August 5, 2026, and responses are due by August 12, 2026, with no specific set-aside classification indicated. Although no organizational address or point of contact details are provided, the work must be performed in accordance with the specifications outlined by the DLA’s FDT program, and the contract is accessible via the DIBBS platform. The contractor must ensure all packaging, labeling, documentation, and readiness for sea transport meet the operational and security demands of military logistics, with no flexibility in adherence to established standards.
All Other Support Activities for Transportation

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423840
New
DIBBS
Domestic Supply Chain Compliance and ReportingAll materials used in production must be sourced exclusively from U.S. or designated foreign countries to ensure compliance with FAR and DFARS regulations, with full documentation maintained to verify origin and traceability throughout the supply chain. The subcontract requires strict adherence to domestic sourcing requirements and demands rigorous recordkeeping to demonstrate adherence to federal procurement standards. This contract is issued by the Department of Defense through the Maritime Supply Chain office and is open for response until August 12, 2026, with materials classified under NAICS code 423840 related to wholesale trade of miscellaneous durable goods. Failure to provide accurate documentation or source non-compliant materials will result in nonconformance and potential contract termination.
Industrial Supplies Merchant Wholesalers

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332112
New
DIBBS
Precision Machining of Centrifugal Pump ImpellerThe contract calls for the manufacture of two precision centrifugal pump impellers designed for critical applications requiring strict compliance with military or industrial specifications. This subcontract is part of the Department of Defense’s Maritime Supply Chain initiative and is classified under NAICS code 332112, indicating it falls within the precision machining and manufacturing sector for pumps and pumping equipment. The impellers must meet exacting quality and performance standards to ensure reliable operation in demanding environments, where failure is not an option. All work must be completed to stringent technical requirements without deviation, emphasizing dimensional accuracy, material integrity, and surface finish. The solicitation was posted on August 5, 2026, with a firm deadline for responses on August 12, 2026, leaving a limited window for qualified subcontractors to submit proposals. The place of performance and point of contact details are not specified, suggesting the contractor may have flexibility in location but must still meet all delivery and certification benchmarks. The contract is accessible through the DIBBS platform, and interested parties must ensure full alignment with the technical and compliance demands outlined in the full RFQ to be considered for award. There is no set-aside designation, meaning any eligible supplier may bid regardless of business size or ownership characteristics.
Nonferrous Forging

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
New
DIBBS
Data retrieval failure — no sub-opportunities identifiableData retrieval for the prime contract has failed, preventing identification of any subcontract opportunities linked to this solicitation. The posting date is August 5, 2026, with a response deadline of August 17, 2026, and the opportunity is categorized as a subcontract under the Maritime Supply Chain agency within the Department of Defense. The place of performance is listed as Robins AFB with a zip code of 31098-1887, though no city, state, or country details are provided for the office address or point of contact. No solicitation number, NAICS code, set-aside type, or organization type is available, and the official link to the solicitation is accessible via the DIBBS platform.

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334418
New
DIBBS
CIRCUIT CARD ASSEMB
Solicitation # SPE7M1-26-T-250H
The contract pertains to the procurement of 30 circuit card assemblies identified by NSN 5998-00-111-4498 and part number 65901-02973-044, with a unit price of $30.00 and a total value of $900.00. Delivery is required within 20 days under FOB origin terms, with no variance allowed in quantity, and acceptance occurs at the origin point. The items must be packaged in compliance with MIL-STD-2073-1E, marked according to MIL-STD-129, and contain no special marking codes. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, with Covered Defense Information rules applied. The goods are destined for the Government of Israel, Ministry of Defense, with a specified freight forwarder and government use identifiers included. The solicitation number is SPE7M1-26-T-250H, issued by the Department of Defense’s Maritime Supply Chain, with a response deadline of August 17, 2026, and a required delivery date of August 7, 2026. The contract falls under NAICS code 334418 and is administered through DLA’s eProcurement system, with all unit of issue conversions defined by official DoD standards.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
ALARM, GAS, AUTOMATIC
Solicitation # SPE7M1-26-T-250L
The contract pertains to the procurement of 307 units of an automatic gas alarm with NSN 6665-01-499-7234 under solicitation SPE7M1-26-T-250L, issued by the Department of Defense’s Maritime Supply Chain division. The solicitation is a total small business set-aside, with responses due by August 17, 2026, and requires delivery within 13 days after award. All supplies must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, where revisions in effect at the time of solicitation issue or award govern compliance. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware except under specific exemptions for functional uses such as batteries, fluorescent lights, weapons systems, or authorized instruments, with portable devices containing mercury required to be shockproof and feature a secondary containment boundary in accordance with NAVSEA 5100-003D. The offeror must submit a complete data package covering both the approved and alternate parts, as no existing data is available. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Misty Slone, reachable via email and phone provided.
Other Measuring and Controlling Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333912
New
DIBBS
SEAL ASSEMBLY, SHAFT, SP
Solicitation # SPE7M1-26-Q-1335
The seal assembly is a shaft-mounted, spring-loaded mechanical seal requiring pure carbon material proprietary to Morgan Advanced Materials, specifically Cage 80894, as defined by Drawing 5773203, Sheet 26. Manufacturing must comply with NAVSEA 5773203, Piece No. 10A, and Drawing Sheets 26 and 30, with three critical deviations: the outer shell must follow Ram Seal Drawing 01-250159 Rev B, the drive band must adhere to Ram Seal Drawing 11-250159 Rev B, and the spring retainer must conform to Ram Seal Drawing 12-250259 Rev A. Each unit must be delivered with a complete installation kit containing specified O-rings identified by part numbers 5773203-1.6, 5773203-1.7.1, 5773203-12.6.4, 5773203-1.8.1, 5773203-1.9.1, 5773203-4.1, 5773203-10.11, 5773203-12.6.5, and a 2-inch steel spanner wrench with a .250 inch pin per Fed Spec GGG-W-665 Type 2 Grade A. The contract mandates a Certificate of Quality Compliance for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and requires electronic submission of each COQC via the iRAPT system. Product verification testing may be invoked at the government’s discretion under DLAD 52.246-9004, and all supplies must conform to DLA packaging, configuration management, and inspection requirements including RQ002, RQ009, and RD003. The NSN 4320-01-269-8849 is solicited under a total small business set-aside with a delivery deadline of 30 days ADO for 104 units, sourced through the Department of Defense’s Maritime Supply Chain under contract SPE7M1-26-Q-1335.
Air and Gas Compressor Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333618
New
DIBBS
MODIFICATION KIT, EL
Solicitation # SPE7M1-26-T-250F
This contract specifies the procurement of a Modification Kit, EL, with NSN 6105-01-705-8310 and part number 377-53322-000, supplied by JOHNSON CONTROLS NAVY SYSTEMS, LLC. The delivery is for one unit, to be shipped FOB destination within 20 days of contract award, with no quantity variance allowed. All packaging and preservation must strictly comply with MIL-STD-2073-1E, Appendix D, for kits, and marking must adhere to MIL-STD-129. Packaging requirements as defined by DLA’s RP001 apply, including palletization and the use of specified preservation methods, wrapping, and cushioning materials. The item is designated as a Critical Application Item and may involve Covered Defense Information under RD003. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling. The delivery destination is the USS CANBERRA LCS 30 at FPO AP 96694, and shipment logistics must follow DLAD Proc Note C19 for transportation and C20 for first destination delivery. The contract solicitation number is SPE7M1-26-T-250F, with a required delivery date of August 3, 2026, and procurement is managed under NAICS code 333618 by the Department of Defense’s Maritime Supply Chain.
Other Engine Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334511
New
DIBBS
INDICATOR, CARBON MONOX
Solicitation # SPE7M1-26-T-250G
This contract specifies the procurement of a carbon monoxide indicator unit with part number BWC2-M25100 and NSN 6665200018480, with a quantity of five units to be delivered within 20 days to the USS ROBERT SMALLS CG 62. Delivery is FOB destination with zero variance allowed and inspection and acceptance occurring upon arrival. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific storage and handling requirements such as dry climate control and prohibition of cushioning materials. All hazardous materials, including lithium batteries, must adhere to DLA packaging and shipping standards, with marking and documentation following strict DoD guidelines. The item is classified as a critical application product with a TYPE 2 shelf life of 12 months extendable, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the supplied hardware except under approved exceptions for functional components like certain instruments or sensors as defined by NAVSEA. Suppliers are required to submit Safety Data Sheets (SDS) and Hazard Communication Standard (HCS) compliant labels in accordance with 29 C.F.R. 1910.1200, effective since June 1, 2015, replacing the previous Material Safety Data Sheet (MSDS) requirements. Employees must be trained on these updated standards, including proper classification, labeling, and handling procedures. The contract incorporates technical and quality requirements from the DLA Master List, and the unit of issue is defined by DoD standards. The solicitation number is SPE7M1-26-T-250G, with a required delivery date of August 3, 2026, and responses due by August 17, 2026. Transportation and shipment instructions reference DLA procedural notes C19 and C20, and the item is subject to federal acquisition regulations under the North American Industry Classification System code 334511.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
ALARM, GAS, AUTOMATIC
Solicitation # SPE7M1-26-T-250J
The contract is for the procurement of 185 units of an automatic gas alarm identified by NSN 6665-01-499-7234 under purchase request 7015538145, with a delivery requirement of 13 days after order placement. The solicitation number is SPE7M1-26-T-250J, issued by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency, with a response deadline of August 17, 2026. The technical requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with revision control depending on the type of acquisition—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions adhere to the revision in effect on the RFP issue date unless an amendment supersedes it. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware or equipment, unless exempted for specific functional applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or NAVSEA-specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in accordance with NAVSEA 5100-003D. Offerors must provide a complete data package covering both the approved and alternate parts, as no existing data is available for this item. The place of performance is Tracy, California, with Misty Slone listed as the primary point of contact.
Other Measuring and Controlling Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACL
Solicitation # SPE7M1-26-U-5053
The contract solicitation SPE7M1-26-U-5053 seeks the procurement of an electrical connector, receptacle, identified by NSN 5935015240367 and part number 2583A-125, under an indefinite-delivery contract structure with an estimated annual quantity of 11 units and a maximum contract value of $350,000. Deliveries are required FOB Origin with a 57-day lead time following award, and goods will be inspected and accepted at the destination point. All supplies must comply with stringent DLA packaging and quality requirements, including adherence to MIL-STD-129 for labeling and marking, RP001 for palletization, and RA001 for technical specifications from the DLA Master List of Technical and Quality Requirements, which supersede commercial standards such as ASTM D3951. Hazardous materials, as defined by FED-STD-313, must be packaged under TQ requirement IP025 and labeled per OSHA’s Hazard Communication Standard, while non-hazardous items must meet commercial packaging standards unless overridden by DLA requirements. Physical identification of bare items is mandated under RQ017. The contract includes mandatory clauses related to employment equity, anti-trafficking, sustainable products, cybersecurity safeguards including NIST SP 800-171 and DFARS 252.204-7012, and prohibitions on covered defense telecommunications equipment. Payment will be processed exclusively via Wide Area WorkFlow using the Invoice and Receiving Report method, and all offers must be submitted electronically through the DIBBS portal by the August 20, 2026 deadline. The solicitation requires full compliance with Buy American provisions and mandates U.S.-flag vessels for ocean transportation unless waived. No unit price is listed in the CLIN, but the total estimated value is capped at $350,000, with award based on price and other factors, not as a strictly lowest price technically acceptable procurement. The contract is unilateral, allowing the Government to issue delivery orders under predetermined terms, and includes guaranteed minimum quantities. All representations and certifications by offerors remain unpopulated at the solicitation stage.
Electronic Connector Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333996
New
DIBBS
HOUSING SECTION, LIQ
Solicitation # SPE7M1-26-T-250A
This contract pertains to the procurement of a housing section and pump under solicitation SPE7M1-26-T-250A, with a single unit of 1 EA identified by NSN 4320-01-511-0467 and part number 009-1107B08-347552A from Carver Pump Company. Delivery is required within 20 days FOB destination, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. All items must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, wrapping, and palletization standards. Mercury and mercury-containing compounds are strictly prohibited in or on the supplied hardware except for designated functional uses such as certain batteries, lighting, instruments, sensors, controls, weapon systems, and NAVSEA-specified reagents, with additional containment and shockproofing mandates for portable devices. Packaging must adhere to RP001 and special marking code 00-00 applies, with no unique identifiers beyond standard requirements. Shipment must be delivered to the FPO address for USS JOHN P MURTHA LPD 26 using the fastest traceable means, explicitly prohibiting parcel post, and must follow DLA procurement notes C19 and C20 for transportation routing. The supply is tied to Project LK5 TP 2 with a required delivery date of August 3, 2026, and is subject to federal procurement standards incorporating technical and quality requirements referenced from the DLA Master List. The contracting office is under the Department of Defense’s Maritime Supply Chain, with Michael Reese as the primary point of contact.
Fluid Power Pump and Motor Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details