Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Aluminum Structural Angle Supply

Active

Federal

Response Deadline08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the supply of 3 feet of aluminum structural angle fabricated from 7075 alloy in 0-annealed temper, meeting exacting military and ASTM standards for dimensional accuracy and material properties. This component must conform to specified engineering requirements to ensure compatibility with defense-grade assemblies, with no tolerance deviations permitted in geometry or metallurgical condition. The material selection and processing method are critical to achieving the necessary strength-to-weight ratio and structural integrity required for high-stress applications within defense systems. Issued by the Defense Logistics Agency under the Department of Defense, this subcontract was posted on July 28, 2026, with responses due by August 6, 2026. The solicitation falls under NAICS code 331318, which categorizes it within nonferrous metal rolling, drawing, and extruding. There is no set-aside designation applied, and performance location details are not provided, indicating flexibility in manufacturing origin as long as compliance and delivery timelines are met. All submissions must align with the technical specifications outlined in the solicitation, accessible via the provided DIBBS link, and must be positioned to support urgent defense supply chain needs without disruption.

General Info

Supply 3 feet of 7075 aluminum angle, 0-annealed, per military and ASTM standards for defense systems.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

331318 - Other Aluminum Rolling, Drawing, and ExtrudingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 3 feet of aluminum structural angle made from alloy 7075 in 0-annealed temper, with specified dimensions and compliance to military and ASTM standards.

Similar Contracts

Same NAICS industry code

WIRE, ELECTRICALThis contract specifies the procurement of 200 feet of electrical wire in a single continuous length, identified by NSN 6145-01-229-9665 and part number M16878/16BLJ0, conforming to MIL-DTL-16878H(3) Sup 1A and MIL-DTL-16878/16D specifications. The wire must be packaged in accordance with ASTM D3951 and labeled per MIL-STD-129, with packaging and palletization strictly following DLA’s Master List of Technical and Quality Requirements, which supersede all other standards. The advice code 26 mandates continuous length with no multiple unit packs permitted. Delivery is FOB origin with inspection and acceptance also at origin, and the supplier must meet a 155-day delivery timeline with no tolerance for quantity shortfalls—only a 10% overage is allowed. The wire is to be shipped via traceable freight methods, not parcel post, to the designated naval shipyard address in San Diego. A separate line item exists for a first article test requiring one unit, with no separate charge assumed unless explicitly quoted; failure to address this item will result in it being treated as complimentary. The contract includes mandatory compliance with configuration change management, variance requests, and government identification removal protocols as outlined in referenced DLA requirements. The solicitation number is SPE7M0-26-T-021Q, with a response deadline in August 2026 and an original delivery date of July 30, 2026.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 23 hours ago

DEADLINE

WIRE, ELECTRICALThe contract specifies the procurement of 29,000 feet of electrical wire under NSN 6145011671637, with a unit of issue in feet and a requirement for material to be supplied in continuous length based on the advice code associated with the order. The wire must comply with NEMA HP3 Revision NR dated 01/01/2021, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and RP001 DLA packaging requirements, with each spool containing 500 feet and palletization following specified guidelines. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and a quantity tolerance of plus or minus five percent is permitted. The required delivery window is 161 days from contract award, with an original delivery date of November 2, 2026, and a needed ship date of January 19, 2027. The contract is under full and open competition, and the shipping address is the DLA Distribution facility in New Cumberland, Pennsylvania. All packaging and marking must align with federal standards, and unit of issue conversions are referenced via the official DLA unit of issue document. The solicitation number is SPE7M1-26-T-236W, with a response deadline of August 10, 2026, and the primary point of contact is Alisha Blanton of the Department of Defense’s Maritime Supply Chain.

MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

ANGLE, STRUCTURALThis contract specifies the procurement of structural angle aluminum alloy 7075 in 0-annealed temper with exact dimensions of 1.120 inches height, 1.120 inches width, and 0.080 inches thickness, supplied in full-foot lengths up to 12 feet, with a required delivery of three feet total. All material must conform to technical standards including SAE AMS-QQ-A-200/11A and ASTM B666/B666M-20, and must be accompanied by a Certificate of Quality Compliance—also known as mill-material certification—with every shipment, copies of which must be sent directly to the DLA Troop Support Contracting Officer. Each unit must carry continuous identification markings including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer's name, heat and lot number, and dimensions, applied via stamping or stenciling using non-contaminating, waterproof, and durable methods; adhesive labels are required for small bars and tubes under 0.250 inches nominal OD. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) as mandated by DLA Troop Support, and any deviation or use of non-approved distributors constitutes an unauthorized substitution with potential criminal and civil penalties. Packaging must adhere to DLA’s RP001 requirements and MIL-STD-129, with ASTM D3951 secondary to DLA standards, and palletization must follow DLA guidelines. The product is subject to destination inspection and acceptance, with firm fixed pricing and zero quantity variance permitted. Freight must be shipped by traceable means—parcel post is prohibited—with delivery due within 30 days after order award to the Fleet Readiness Center East in Cherry Point, North Carolina. The solicitation number is SPE8E4-26-Q-0326, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced through R and I numbers, with compliance overriding any conflicting commercial standards.

Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

Manufacture of Virgin Powdered Metal (Copper-Nickel Alloy)The contract requires the production of 600 kilograms of virgin Osprey Cu30Ni metal powder with a particle size distribution of -45 +15 micrometers, fully compliant with MIL-PRF-32814 specifications. Strict quality control measures are mandated to ensure precise particle size consistency and high chemical purity, critical for performance in high-reliability defense applications. The material must be manufactured using virgin feedstock and meet all technical benchmarks outlined in the military performance specification without compromise. This is a small business set-aside subcontract under NAICS code 331318, issued by DLA Maritime - Portsmouth under the Department of Defense, with responses due by August 6, 2026. The work must be performed at a facility located in Kittery, 03904, and is restricted to eligible small businesses as defined by the Small Business Administration. The solicitation is open for bidding with a submission deadline in the specified timeframe, and participation is limited to businesses qualifying for the total small business set-aside. The contract emphasizes adherence to stringent military standards and is focused on securing a critical material supply chain for defense systems.

DLA Maritime - Portsmouth

POSTED

DEADLINE

LEVER, REMOTE CONTROThis contract solicits 15 units of a lever remote control with part number 3040-00-614-7196 under solicitation SPE7L1-26-Q-1370, with a delivery deadline of 118 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions tied to drawings and quality assurance documents including DRW 11671161 Notes 7 and 8, and SQAP QA-19207-11671161, which apply to critical, major characteristics and only to major characteristic 101. The item is subject to stringent quality controls including tailored higher-level requirements for manufacturers and non-manufacturers, inspection and acceptance at origin, and rigorous configuration change management requiring engineering change proposals and variance requests. All components must comply with applicable Qualified Products Lists or Qualified Manufacturers Lists as outlined in procurement note H02. The contract prohibits the use of Class I ozone-depleting chemicals in any component or process, mandating approved substitutes where required. Technical data associated with this item is subject to export control under ITAR or EAR, making unauthorized disclosure—whether to foreign nationals in the U.S. or abroad—an infringement. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export-controlled data training, and DLA authorization may access such data, with DFARS 252.225-7048 strictly enforced. Packaging must meet DLA requirements, and government identification must be removed from non-accepted supplies. Cybersecurity requirements mandate CMMC Level 2 certification by a third-party assessment organization. The solicitation closed August 5, 2026, with performance to be delivered to Barstow, CA, under federal acquisition rules administered by the Department of Defense's Land Supply Chain.

LAND SUPPLY CHAIN

POSTED

DEADLINE

CABLE, SPECIAL PURPOThe contract is for 8,500 feet of special purpose cable identified by NSN 6145-01-132-6843 and part number WM-60A/U, compliant with MIL-DTL-10392F Revision F dated January 18, 2023. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes other standards such as ASTM D3951. The cable must be delivered in continuous length, with packaging conforming to MIL-STD-129 and RP001 DLA Packaging Requirements for Procurement, and each spool must be 500 feet with no lengths under 50 feet; the packaging must adhere to the specified Unit of Issue and Quantity per Unit Pack as outlined in the contract. Delivery is FOB origin with a 169-day lead time, and the quantity may vary plus or minus five percent. Inspection and acceptance occur at the destination, and the material must be labeled, marked, and palletized in full compliance with applicable military standards. The requirement is under a total small business set-aside, with the delivery address and shipping instructions fixed to DLA Distribution Cherry Point in North Carolina. The contract was issued with a solicitation number SPE7M1-26-T-233V, posting on July 27, 2026, and a response deadline of August 7, 2026, with the original delivery date set for February 4, 2027.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

WIRE, ELECTRICALThis contract specifies the procurement of electrical wire under NSN 6145-00-945-7471, with a required quantity of 13,000 feet delivered in continuous length as dictated by the applicable advice code, where multiple unit packs are only acceptable if the code is 2P or 39, otherwise strict continuous length is mandated. The wire must conform to SAE AS22759E Revision E dated July 1, 2024, and be manufactured in accordance with the Technical Data Package Rev B Gen 2, with part number M22759/11-22-4. It is subject to the DLA Master List of Technical and Quality Requirements, and must comply fully with MIL-STD-2073-1E packaging standards and MIL-DTL-12000 preservation guidelines for cable and wire. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for specific functional components like batteries, fluorescent lamps, or specialized instruments, and where used, such items must meet NAVSEA 5100-003D requirements for shock resistance and secondary containment. The item is on the Qualified Products List, necessitating supplier qualification, and must be marked per MIL-STD-129 with special marking code ZZ-ZZ for additional requirements. Palletization is governed by DLA packaging standards and all deliveries are FOB origin with a 7-day delivery window, accepting a quantity variance of plus or minus 5 percent. Inspection and acceptance occur at the destination, and the specified delivery location is the DLA Distribution facility in New Cumberland, PA, with a need ship date of August 1, 2026 and original required delivery date of November 3, 2026. The wire is classified as a Critical Application Item, requiring strict adherence to all technical, material, and packaging specifications, with deviations requiring formal requests for variance.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Helical Compression Spring Supply (NSN 5360-01-133-1427)The contract requires the manufacture and delivery of 19 helical compression springs meeting military National Stock Number 5360-01-133-1427 specifications, with strict adherence to Department of Defense technical standards set by the Defense Logistics Agency. All components must comply with MIL-STD-129 packaging requirements and be accompanied by electronic invoicing submitted through the Wide Area WorkFlow system. The work is classified as a subcontract under NAICS code 331318, with performance to be completed at Greensboro, North Carolina, at the zip code 27409. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026, with no set-aside provisions indicated. The acquiring activity is the Fluid Handling Division of the Department of Defense, and all deliverables must ensure full military compliance from production through shipment and documentation.

FLUID HANDLING DIVISION

POSTED

DEADLINE

SPRING, HELICAL, COMPThe contract solicitation SPE7M4-26-T-276C is for the procurement of 965 helical compression springs with NSN 5360-00-371-0159, classified as a commercial item, to be delivered to Arizona Industries for the Blind in Phoenix, AZ, with a delivery timeline of 910 days ADO and a need ship date of January 30, 2029. The solicitation is issued by the Defense Logistics Agency’s Fluid Handling Division under a simplified acquisition process and requires full compliance with DLA Packaging Requirements (RP001) and the DLA Master List of Technical and Quality Requirements (RA001). Packaging must conform to MIL-STD-2073-1E using Method 33 (Clean/Dry) and Preservation Material 49, with unit containers packed in groups of 100 per intermediate container coded E5, and all parcels labeled and barcoded per MIL-STD-129, including the special marking code 24 indicating readiness for inspection or use. Hazardous materials, if applicable, must be labeled in accordance with OSHA’s Hazard Communication Standard and MIL-STD-129, with pre-award submission of Safety Data Sheets required. Inspection and acceptance occur at the destination, with the government retaining final authority under FAR 52.246-1. The contract incorporates numerous DFARS and FAR clauses addressing cybersecurity (252.204-7012, 252.240-7997), whistleblower protections, payment processes, subcontracting for commercial items, and prohibitions on covered defense telecommunications equipment. The contract is to be awarded using WAWF for invoicing, with payment conditioned on proper electronic submission and valid DoDAAC assignments, and no pricing information is populated in Section B, with estimated contract value derived from historical data between $23,160 and $34,383. All offers must be submitted via DIBBS, and no evaluation factors or award basis are disclosed in the available documentation. The offeror must provide current UEI and CAGE codes, but no socioeconomic or small business certifications have been completed or indicated. Deviations 2026-O0015 and 2026-O0025 apply to subcontracting and NIST SP 800-171 requirements, respectively

FLUID HANDLING DIVISION

POSTED

DEADLINE

WIRE, ELECTRICALThe contract specifies the procurement of electrical wire in continuous lengths, with a total quantity of 17,431 feet, supplied in spools of 500 feet per unit as required by the technical specifications. The material must conform to SAE AS22759/11A and SAE AS22759E standards and is subject to stringent quality and technical requirements referenced from the DLA Master List of Technical and Quality Requirements. The wire must be manufactured by a QPL-approved supplier at the time of contract award, and no mercury or mercury compounds may be intentionally introduced into the product, its packaging, preservation, or marking, except for functional uses in batteries, fluorescent lights, sensors, or specified instruments under NAVSEA guidelines. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-12000 for preservation of cable and wire, with marking following MIL-STD-129. Palletization adheres to DLA packaging requirements, and the advice code determines whether multiple unit packs are acceptable—continuous length is mandatory under certain codes. Delivery is FOB origin with a 5% quantity variance allowance, inspection and acceptance occur at the destination, and the items must be shipped to three distinct DLA distribution centers in San Diego, Tinker AFB, and Robins AFB by specified deadlines ranging from March 2027 to December 2026. All units are designated as a critical application item under solicitation SPE7M2-26-T-5705, with strict engineering change control and variance request procedures in place.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

SPRING, HELICAL, COMPRESThis contract covers the procurement of 25 helical compression springs identified by NSN 5360-01-061-2937 under solicitation SPE7M4-26-T-277R, with a delivery requirement of 168 days after order. The technical and quality specifications governing this procurement are defined by the DLA Master List of Technical and Quality Requirements, which must be referenced for all compliance details, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds in or in direct contact with the supplied hardware, except for specified functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier, in accordance with NAVSEA 5100-003D. All supplies must be free of government identification if rejected, and the procurement is managed by the Department of Defense’s Fluid Handling Division, with performance taking place in Greensboro, NC. The solicitation opened on July 23, 2026, and responses are due by August 3, 2026, with Blake Tushar listed as the primary point of contact.

FLUID HANDLING DIVISION

POSTED

DEADLINE

SPRING, HELICAL, COMPRESThe contract pertains to the procurement of 19 helical compression springs identified by NSN 5360-01-133-1427, with a delivery requirement within 168 days after order placement. The solicitation, issued under number SPE7M4-26-T-279U, was posted on July 23, 2026, with responses due by August 3, 2026, and is managed by the Fluid Handling Division of the Department of Defense. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless updated by an amendment. The supplier, Vickers Inc. of Los Angeles, CA, must comply with all referenced specifications denoted by R or I numbers from the DLA database. Government identification must be removed from non-accepted supplies as per RQ011. Performance is to be delivered to Greensboro, North Carolina, 27409, with Rory O’Reilly as the primary point of contact, reachable via phone or email. The NAICS code 331318 classifies the procurement within the forged and stamped metal product manufacturing sector.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Cybersecurity Compliance for Covered Contractor SystemsThe contract requires the implementation and documentation of cybersecurity controls aligned with NIST SP 800-171 for all systems handling covered defense information, including technical data, delivery schedules, and compliance reports. This effort is critical to ensure the protection of sensitive government information and must be completed according to federal cybersecurity standards. The subcontractor is responsible for fully adhering to the required control families, maintaining accurate documentation, and demonstrating ongoing compliance throughout the contract term. The work is being performed under the auspices of the Defense Logistics Agency within the Department of Defense and falls under NAICS code 541512, indicating it involves computer systems design services. The contract is positioned as a subcontract, and while no specific set-aside designation is provided, performance is expected to meet all applicable federal cybersecurity mandates. Completion of this obligation is essential for maintaining eligibility to handle protected defense information and supporting the broader defense supply chain’s security posture.

Computer Systems Design Services

POSTED

about 23 hours ago

DEADLINE

Quality Assurance and ISO 9001 Compliance SupportThe contract requires comprehensive quality system oversight to maintain strict adherence to ISO 9001:2015 standards, focusing on internal audits, corrective action management, and preparation of Certificate of Conformance and Quality Control documentation for government acceptance at the point of origin. The work is integral to ensuring that all deliverables meet the rigorous quality expectations of the Department of Defense, particularly under the Defense Logistics Agency’s oversight, with an emphasis on systemic compliance rather than isolated inspections. This subcontract falls under NAICS code 541330, indicating specialized scientific and technical consulting services related to quality assurance. Performance is tied to meeting federal acceptance criteria at origin, requiring continuous monitoring, documentation rigor, and proactive resolution of nonconformities. The contract is posted for potential bidders as of July 28, 2026, with no stated set-aside designation, and the place of performance details are not yet specified, though the primary accountability lies with supporting DLA’s quality assurance framework for defense supply chain integrity.

Engineering Services

POSTED

about 23 hours ago

DEADLINE

Hazardous Materials Compliance and Packaging ServicesThis contract pertains to the identification, labeling, packaging, and documentation of hazardous materials associated with cable and conduit products, ensuring full compliance with federal and military regulatory standards. The scope includes the comprehensive management of Safety Data Sheets and adherence to all applicable requirements for handling, transporting, and documenting hazardous substances throughout the supply chain. Services must align with Department of Defense protocols and national standards for hazardous materials, with an emphasis on accuracy, traceability, and regulatory integrity. The work is performed under a subcontract awarded by the Defense Logistics Agency, operating under the Department of Defense, and falls under the NAICS code 541690 for other scientific and technical consulting services. The contract was posted on July 28, 2026, with performance obligations tied to the delivery and support of military-grade cable and conduit systems. All activities must meet stringent military specifications, and the contractor is responsible for maintaining documented, auditable processes that guarantee compliance throughout the product lifecycle.

Other Scientific and Technical Consulting Services

POSTED

about 23 hours ago

DEADLINE

Supply of Industrial Cable and Conduit (Electrical Components)The contract entails the supply and delivery of electrical cable and conduit assemblies specifically designed for military or critical infrastructure applications, requiring full compliance with MIL-STD packaging, labeling, and hazardous materials handling regulations to ensure operational readiness and safety. All components must meet stringent military standards for durability, performance, and environmental resilience under demanding conditions. Delivery is specified as FOB Destination to the Defense Logistics Agency Distribution Center in New Cumberland, Pennsylvania, placing responsibility for transportation and risk transfer on the supplier until the goods arrive at the designated location. The contract falls under NAICS code 335999 for other electrical equipment and component manufacturing and is structured as a subcontract within the broader Department of Defense procurement framework, administered by the Defense Logistics Agency. All activities must adhere to federal contracting guidelines and regulatory compliance requirements applicable to defense supply chains.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 23 hours ago

DEADLINE

Transportation and Delivery to FPO Address (FOB Destination)The contract requires the domestic transportation and coordination of shipments to the FPO address 96616, serving the USS RONALD REAGAN CVN 76, under FOB Destination terms, with all deliveries mandatory within 20 calendar days of order placement. This subcontract is issued by the Defense Logistics Agency under the Department of Defense, with a NAICS code of 493190 indicating specialized freight transportation services, and performance is strictly tied to the specified FPO location. The solicitation was posted on July 28, 2026, with a firm response deadline of August 10, 2026, leaving bidders a limited window to submit proposals for this time-sensitive logistics requirement.

Other Warehousing and Storage

POSTED

about 23 hours ago

DEADLINE

Hazardous Materials Handling and DocumentationThis contract requires strict adherence to all regulatory standards for handling hazardous materials, including proper labeling, maintenance of up-to-date Safety Data Sheets, and full compliance with OSHA and DFARS requirements. The subcontract is tied to the Defense Logistics Agency under the Department of Defense and falls under NAICS code 541620, indicating it relates to scientific and technical consulting services involving hazardous material management. Performance is expected at a military post office location with ZIP code 96616, suggesting operations may support defense logistics in a deployed or overseas capacity. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and emphasizes documentation rigor to ensure safety and regulatory alignment across all stages of material handling.

Environmental Consulting Services

POSTED

about 23 hours ago

DEADLINE

Military Labeling and Barcoding Services (MIL-STD-129)The contract requires the application of MIL-STD-129 compliant labeling for military logistics, ensuring all items are properly marked with the National Stock Number, contract number, quantity, delivery point, and machine-readable barcodes in either Data Matrix or linear format. This service is critical for accurate inventory tracking, deployment, and receipt of defense materiel across the Department of Defense supply chain. The work must be performed in accordance with strict military standards to guarantee interoperability and compliance with logistics systems used by the Defense Logistics Agency. The solicitation is classified as a subcontract under NAICS code 541690, with a response deadline of August 10, 2026, and a posted date of July 28, 2026. The place of performance is identified as FPO with ZIP code 96616, indicating delivery or labeling operations are tied to military postal addressing for overseas or expeditionary support. The agency responsible is the Defense Logistics Agency under the Department of Defense, underscoring the operational importance and federal nature of the requirement. There is no set-aside designation specified, meaning this opportunity is open to all eligible contractors without preferential treatment based on size or status.

Other Scientific and Technical Consulting Services

POSTED

about 23 hours ago

DEADLINE

Packaging and Preservation Services (MIL-STD-2073-1E)The contract requires the provision of packaging and preservation services for military shipments in strict compliance with MIL-STD-2073-1E, specifically using the Clean and Dry method to ensure all items remain protected from environmental damage during transit. This includes the proper materials, procedures, and documentation necessary to maintain the integrity, functionality, and readiness of equipment and supplies throughout the supply chain, from initial packaging through delivery to the final destination. All work must adhere to defense-standard protocols for moisture control, contamination prevention, and long-term storage stability. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with performance occurring at FPO 96616. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, and is classified under NAICS code 493190 for other transportation support activities. The contract does not specify a set-aside type or point of contact, and interested parties must submit responses through the DIBBS portal at the provided link to be considered for award.

Other Warehousing and Storage

POSTED

about 23 hours ago

DEADLINE

Supply of Compressor Unit (NSN: 4130014499745)The contract involves the procurement and delivery of a military-grade compressor unit identified by NSN 4130014499745, specifically required to meet stringent technical specifications for installation aboard the USS RONALD REAGAN CVN 76. This subcontract is issued under the Department of Defense via the Defense Logistics Agency and pertains to a critical component used in shipboard systems, ensuring operational readiness and compliance with defense standards. The unit must adhere to military-grade durability, performance, and environmental tolerances appropriate for naval service conditions. The solicitation is open with a response deadline of August 10, 2026, and the place of performance is designated as FPO 96616, indicating delivery to a naval fleet location. The NAICS code 333618 classifies this procurement under the Manufacturing of Other Commercial and Service Industry Machinery, reflecting the specialized nature of the compressor unit’s design and production. Though the solicitation number and point of contact are not listed in the provided data, the official procurement portal can be accessed through the provided link for further details and submission requirements. All vendors must ensure full conformance to the technical requirements and delivery timelines to qualify for award.

Other Engine Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

Accelerated Subcontractor Payment AdministrationThe contract titled Accelerated Subcontractor Payment Administration requires the implementation of a system to ensure prompt payment to small business subcontractors in strict compliance with FAR 52.232-40, mandating timely disbursement of funds within established federal timelines. This includes seamless integration with the Wide Area WorkFlow system and Department of Defense payment platforms to automate and validate payment processes, reducing delays and administrative errors. The contractor must establish controls to track subcontractor invoices, verify eligibility, and reconcile payments across all relevant DoD financial systems, ensuring full audit readiness and compliance with federal small business payment standards. The work is to be performed at Fort Stewart, Georgia, with the Defense Logistics Agency under the Department of Defense as the overseeing agency. The solicitation, issued under NAICS code 541211 for architectural and engineering services, requires proposers to respond by August 10, 2026. The contractor will be responsible for maintaining accurate records, generating reports on payment timeliness, and interfacing directly with subcontractors and DoD financial offices to resolve discrepancies. No set-aside information is provided, but the nature of the work inherently supports small business participation through accelerated and reliable payment mechanisms.

Offices of Certified Public Accountants

POSTED

about 23 hours ago

DEADLINE

Small Business Compliance and Representations SupportThis contract supports small business compliance activities including accurate representations, joint venture structuring, and proper disclosure of UEI and CAGE codes to ensure adherence to FAR clauses and federal socioeconomic programs. The work is critical for maintaining eligibility and integrity in government contracting, particularly for businesses seeking to qualify under small business set-asides or other affirmative procurement initiatives. Technical expertise in navigating regulatory requirements and documenting compliance is essential to meet federal standards and avoid misrepresentation. The subcontract is issued by the Defense Logistics Agency under the Department of Defense, with performance expected at Fort Stewart, Georgia, 31314-5185. The NAICS code 541611 indicates that the primary focus is on management consulting services, suggesting the support will involve strategic guidance on compliance framework implementation rather than operational or logistical execution. Proposals must be submitted by August 10, 2026, and the contract is structured as a subcontract, meaning the winning entity will operate under a prime contractor’s umbrella rather than directly with the government. There is no set-aside designation specified, so the opportunity is open to all eligible small businesses regardless of size or socioeconomic classification.

Administrative Management and General Management Consulting Services

POSTED

about 23 hours ago

DEADLINE

DoD Packaging and Palletization ServicesThe contract requires comprehensive packaging and palletizing services for delivered label rolls in strict accordance with MIL-STD-2073-1E and Defense Logistics Agency standards, ensuring compliance with military shipment and storage requirements. A critical component of the work involves applying bar-coded labels for accurate tracking and inventory management while minimizing or eliminating the use of plastic materials wherever feasible, aligning with environmental and operational directives. The services are to be performed at Fort Stewart, Georgia, with the ZIP code 31314-5185 as the designated place of performance, and the work falls under NAICS code 561910 for other support services. The opportunity is structured as a subcontract under the Department of Defense, managed by the Defense Logistics Agency, and responses must be submitted by August 10, 2026, following a posting date of July 28, 2026.

Packaging and Labeling Services

POSTED

about 23 hours ago

DEADLINE