This Solicitation opportunity from Department Of Defense was posted on May 18, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

PRODUCTION LOT TESTING

Closed

SPE4A4-26-T-0118Federal

Submission Closed05/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336412

New

DIBBS

SHAFT, TURBINE, AIRCRThe contract pertains to the procurement of six turbine shafts for aircraft, identified by the National Stock Number 2840-00-837-2071. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, was posted on June 15, 2026, with a response deadline of June 18, 2026. This solicitation, referenced under number SPE4A5-26-Q-0573, aims to source these critical components to support military aircraft operations. The contract is categorized as a federal solicitation without any specified set-aside for particular business types or NAICS code. The place of performance details and specific contact information are not provided in the available data, but the procurement is managed through official Defense Logistics Agency channels. Interested parties could access further information or submit responses via the provided DLA Bid Board System link.

Defense Logistics Agency

POSTED

DEADLINE

29--HOUSING,OIL PUMP ASSEMThis contract involves the procurement of seven units of oil pump assembly housings, identified by NSN 2995004838668, to be delivered to the DLA Distribution Center at Cherry Point within 81 days after order. The solicitation is open as a Request for Quote (RFQ) and is available exclusively through an online portal, with no hard copies, specifications, plans, or drawings provided. Only quotes from approved sources, specifically those with codes 00198 3015676 and 98247 3015676, will be considered, although all responsible sources are encouraged to submit their quotes electronically by the deadline. The contract is issued by the Department of Defense's DLA Aviation office located in Richmond, Virginia, and is set aside entirely for small businesses under the Total Small Business Set-Aside program consistent with FAR 19.5 regulations. The associated NAICS code is 336412, indicating a manufacturing classification. The solicitation was posted on June 15, 2026, with quotes due no later than June 18, 2026. Interested parties can direct questions to the designated point of contact via email and can access the solicitation details through the provided online link.

POSTED

DEADLINE

Production of Cone Exhaust Aircraft ComponentsThis contract involves the manufacture and delivery of cone exhaust components for aircraft under a firm-fixed-price arrangement, with tiered quantities ranging from 1 to 45 units divided into four purchase brackets (1–10, 11–25, 26–35, and 36–45 units). The scope focuses specifically on producing these aircraft parts to meet the Department of Defense’s requirements, facilitated through the Ok DLA Aviation office located in Oklahoma City. The contract is categorized under NAICS code 336412, which pertains to aircraft manufacturing. The solicitation was posted on June 15, 2026, with responses due by June 30, 2026. The place of performance is identified as Brownsburg, though some location details remain unspecified. This subcontract calls for a reliable supplier capable of meeting strict quality and delivery standards to support ongoing aerospace production needs. The absence of a set-aside designation suggests this opportunity is open to all eligible contractors within the aerospace manufacturing industry.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

F110 CASE AND VANE ASSEM (AMC 3R)The contract pertains to the procurement of F110 engine components specifically designated as "CASE AND VANE ASSEM," with the associated part number 2214M15G06 and National Stock Number 2840-01-687-6045. These assemblies house multiple stages of variable and fixed high-pressure compressor stator vanes, feature dimensions measuring approximately 21.6 inches in length, 27.9 inches in width and height, and weigh 190 pounds. The government's best estimate is to acquire 32 units, with a potential procurement range from 8 to 48 units, and delivery is scheduled by December 31, 2027. Shipping is directed to location SW3211, and the solicitation is identified under RFP number SPRTA1-26-R-0335 with the solicitation released on July 1, 2026, and responses due by July 31, 2026. This procurement is set as a limited competition action under FAR 6.302 due to GE Aviation being the sole known capable source, which holds CAGE code 07482. The government intends to solicit only a limited number of sources and reserves discretion over conducting competitive procurement based on received interest. The solicitation will be managed electronically, with no telephone requests accepted, and written or faxed inquiries must be directed only to authorized contacts. The contract is not acquired under FAR Part 12 for commercial items, yet potential vendors have 15 days from the notice to express interest in providing commercial items. An Ombudsman is available to address concerns confidentially during the proposal phase but will not participate in evaluation or selection processes. The contracting office managing this solicitation is located at Tinker AFB, Oklahoma City, under the Department of Defense’s DLA Aviation office. All related information and the solicitation document will be accessible via sam.gov.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

First Article Testing for Cone Exhaust Aircraft ComponentThis contract involves conducting first article testing (FAT) to verify the design, materials, and manufacturing processes of a cone exhaust component used in aircraft. The primary objective is to ensure that the component meets specified quality and performance standards through comprehensive testing. Upon completion, detailed test reports and technical data must be submitted for government review and approval, confirming the component's compliance with required specifications. The subcontract opportunity, issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City, pertains to the aerospace industry under NAICS code 336412. The work is to be performed in Brownsburg, with a response deadline set for June 30, 2026. This contract is critical to validating component reliability and manufacturing integrity in support of military aviation operations.

Ok DLA Aviation At Oklahoma City

POSTED

2 days ago

DEADLINE

in 14 days

AI Contract Overview

This contract, identified by solicitation number SPE4A4-26-T-0118, pertains to Production Lot Testing for a specific National Stock Number/Part Number 0001S00000062 with a quantity of one unit. The contract requires the contractor to produce and submit a Production Lot Test (PLT) report, DI-NDTI-80809B, along with associated documentation for review by the Quality Assurance Representative (QAR). The documentation to accompany shipments includes DD Form 1222, a DD Form 250 or iRAPT receiving report signed by the QAR, a copy of the contract or order, detailed test reports showing actual results and specified tolerances, material and process certifications, process and inspection method sheets, and restricted drawings used in the production process. The contract specifies delivery within 405 days after order date and encompasses various compliance and verification measures to ensure adherence to technical and quality standards set by the Department of Defense. The solicitation is managed by the Supplier Operations Support Division, with Parag Shah serving as the primary point of contact. The overall scope emphasizes rigorous documentation and government oversight to guarantee the production batch meets all contractual and quality requirements before acceptance.

General Info

Production Lot Testing contract for one unit; requires detailed reports, certifications, delivery in 405 days.

Agency

Department Of Defense → SUPPLIER OPER SUPPLIER SPT DIV

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing View NAICS

Place of Performance

Set-Aside

NONE

Documents

(1)

RFQ SPE4A4-26-T-0118 for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 18

Solicitation

Response DeadlineMay 26

Deadline has passed

Submission Closed

05/26/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → SUPPLIER OPER SUPPLIER SPT DIV

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → SUPPLIER OPER SUPPLIER SPT DIV

Office AddressUS

Contacts

Parag Shah

contact@example.gov

+1 (555) 000-0000

Full Description

DI-NDTI-80809B and mark the test report, “Production Lot
SPE4A4-26-T-0118
SECTION A
Test Report, Contract Number [contractor insert] and Lot/Item Number [contractor insert].” (b) Present the contractor’s PLT report to the QAR for review. (c) Include the following documentation with all shipments of PLT Reports: DD Form 1222 and DD Form 250/iRAPT receiving report signed by the QAR; a copy of the contract/order; a copy of all applicable test reports showing actual results and tolerances specified in the technical data package; material and process certifications; process operations and inspection method sheets; copies of drawings used to manufacture the PLT sample with proper marking to restrict public disclosure (if desired) and from Government use other than for NSN/Part Number: 0001S00000062 Quantity: 1 EA Purchase Request: 7007827466QTY - See Solicitation Delivery: 405 days ADO