Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PRODUCTION LOT TESTING

Active
SPE4A6-26-T-26HCFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is a solicitation issued by the Department of Defense ASC Commodities Division for the procurement of two standoff insulators under part number 0001S00000061. The delivery requirement is set for 110 days after the order is received. The procurement is governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for ISO 9001:2015 quality standards, physical item marking, and DLA packaging requirements. Inspection and acceptance are to be conducted at the point of origin. Strict security and compliance protocols are in place, including CMMC Level 2 certification and adherence to Covered Defense Information regulations. Because the technical data is subject to ITAR and EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete mandatory training to access the data. The solicitation, identified as SPE4A6-26-T-26HC, was posted on September 2, 2026, with a response deadline of September 10, 2026.

General Info

DoD solicitation for two standoff insulators; delivery within 110 days; ITAR compliant.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-26HC Request for Quotations

PDF•21 pages•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Berkeley Vaughan
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
INSULATOR,STANDOFF
INSULATOR,STANDOFF
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 0001S00000061 Quantity: 2 EA Purchase Request: 7014434183QTY - See Solicitation Delivery: 110 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335999
New
DIBBS
PANEL, CONTROL, ELECTRIC
Solicitation # SPE8EN-26-T-3103
This contract, solicitation number SPE8EN-26-T-3103, is for the procurement of two electrical-electronic control panels under NSN 7050-01-422-2586. The delivery timeline is set for 167 days after the order is placed. The acquisition is conducted under full and open competition by the Department of Defense, specifically the Construction and Equipment T & IFO EQ agency. The agreement includes strict compliance requirements, including DLA packaging standards, CMMC Level 2 certification, and the prohibition of Class I ozone-depleting chemicals. Because the item contains technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete specific DOD training to access the data. Additionally, the contract mandates adherence to Qualified Products Lists or Qualified Manufacturers Lists for specific components.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A6-26-T-26AF
This contract is for the procurement of 20 feet of electrical insulation sleeving, identified as NSN 5970-00-063-1495 and part number M23053/1-103-0. The item is classified as a commercial critical application item and must be produced by an accredited manufacturer listed on the PRI Qualified Manufacturers List or Qualified Products List. It has a 12-month extendable shelf life and must adhere to SAE AS23053/1 standards. The agreement specifies a delivery timeframe of 20 days and requires compliance with DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed via destination inspection and acceptance, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
COMPUTER SUBASSEMBLY
Solicitation # SPE8EN-26-T-3084
This contract is for the procurement of two computer subassemblies, identified by NSN 7050-01-662-0150 and part number 1756-L83E from Rockwell International Corp. The solicitation, SPE8EN-26-T-3084, is a total small business set-aside issued by the Department of Defense. Delivery is required within 41 days of order, with a required delivery date of December 7, 2026, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical, quality, and packaging requirements, specifically referencing MIL-STD-2073-1E for delivery preparation and MIL-STD-129 for marking. A critical environmental restriction is included prohibiting the intentional addition of mercury or mercury-containing compounds, except where functionally required by specific systems. Inspection and acceptance will take place at the destination.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-5085
This contract is a solicitation by the Defense Logistics Agency for the procurement of one power supply unit, identified by NSN 6130-01-687-9026 and part number 1600902-1 from Thales Defense & Security Inc. The delivery is required within 20 days after the order, with a final required delivery date of August 25, 2026. The item is to be delivered FOB Origin to the 0325 CS BN CO A Maintenance facility at Schofield Barracks, Hawaii. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in certain sample lots. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required and specified by NAVSEA.
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-17MV
This solicitation, issued by the Department of Defense ASC Commodities Division under contract number SPE4A6-26-T-17MV, is for the procurement of 22 electrical special purpose cable assemblies (NSN 6150-01-643-4279). The requirement is a critical application item with a requested delivery timeline of 171 days after receipt of order, targeting a need date of February 12, 2027. While the pricing schedule contains malformed data, historical procurement records for this specific material suggest an estimated value of approximately $550.00. Delivery is designated as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution facility in New Cumberland, PA. The contract is subject to rigorous technical and quality standards, including the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. Quality assurance is governed by specific sampling plans such as MIL-STD-1916 or ASQ Z1.4, with strict acceptance criteria requiring zero non-conformances for sample lots. Packaging must comply with ASTM D3951 and palletization must follow DLA requirements, while all marking and labeling must adhere to MIL-STD-129. Notably, Item Unique Identification (IUID) is not required per DFARS 252.211-7003. Compliance with various FAR and DFARS clauses is mandatory, covering areas such as combating trafficking in persons, safeguarding covered defense information, and hazardous material identification. All electronic submissions and invoicing must be processed through the DLA Internet Bid Board System (DIBBS) and Wide Area WorkFlow (WAWF).
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-5083
This contract is for the procurement of two power supply units, part number FH-64-A from Teledyne FLIR Defense, LLC, under solicitation number SPE7L7-26-T-5083. The items are identified by NSN 6130-01-619-5734 and are to be delivered FOB Origin to Fort Stewart, Georgia, within 20 days. The required delivery date is set for August 25, 2026. The agreement mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, and requires the removal of government identification from non-accepted supplies. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with zero-based sampling plans applied. Additionally, the contractor must comply with CMMC Level 2 self-assessment standards and other technical requirements listed in the DLA Master List.
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELE
Solicitation # SPE4A6-26-T-26GY
This contract is for the procurement of seven rolls of Type III, Grade A electrical insulation tape under solicitation SPE4A6-26-T-26GY. The material must adhere to ASTM D 2686 standards, with specific dimensions of 1296 inches in length, 0.250 inches in width, and 0.0040 inches in thickness. Each unit of issue is defined as a 108 foot roll. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Delivery is set for FOB Origin with an inspection and acceptance point at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The required delivery date is February 28, 2027, with a need ship date of February 7, 2027. Packaging must comply with DLA requirements and MIL-STD-129, utilizing ASTM D3951 for non-hazardous materials or specific TQ requirements for hazardous items. The contract specifies a zero percent quantity variance.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
CLIP, ELECTRICAL
Solicitation # SPE7M1-26-U-5435
The Department of Defense, through DLA Land and Maritime, is soliciting quotes for the procurement of electrical clips under NSN 5999015272897. This request for quote, identified as solicitation SPE7M126U5435, is a total small business set-aside under NAICS code 335999. The initial requirement is for 303 units to be delivered within 48 days after the order is placed. This procurement may result in an automated indefinite delivery contract with a one-year term or a total value of 350,000.00 dollars. The contract includes a guaranteed minimum quantity of 45 units and an estimated one order per year. Items will be shipped to various CONUS and OCONUS DLA Depots. All quotes must be submitted electronically by the deadline of September 2, 2026.
MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 335999
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE7M0-26-T-071T
This contract is for the procurement of one special purpose electrical cable assembly, identified by NSN 6150015451752 and Cooper Interconnect part number 1095-2000-001-A. The order is managed by the Department of Defense under solicitation SPE7M0-26-T-071T and is designated as a total small business set-aside. Delivery is required within five days, with the original required delivery date set for September 2, 2026. The agreement mandates strict adherence to DLA packaging requirements, MIL-STD-129 marking, and MIL-STD-130 for Item Unique Identification. It explicitly prohibits the use of class I ozone depleting chemicals. Shipping is FOB origin, with the final destination being the General Depot of Naval Supplies in Kaohsiung City, Taiwan. Inspection and acceptance will take place at the point of origin.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335999
New
DIBBS
INSULATOR, WEDGE
Solicitation # SPE4A6-26-T-22MC
This contract is for the procurement of 247 lengths of wedge insulators, identified by NSN 5970-00-004-4493 and part number NHT 30-23-16. The material has been reviewed and determined to be non-hazardous, and the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds. Delivery is required within 164 days, with a need ship date of February 14, 2027, and a final required delivery date of April 2, 2027. The agreement specifies strict quality and packaging standards, requiring sampling in accordance with MIL-STD-1916 or ASQ H1331 and packaging per MIL-STD-2073-1E and MIL-STD-129. All items must be bagged and marked individually. The shipment is destined for the DLA Distribution New Cumberland facility in Pennsylvania, with inspection and acceptance occurring at the destination.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 335999
New
DIBBS
CHARGER, BATTERY
Solicitation # SPE7LX-26-U-9596
Contract SPE7LX-26-U-9596 is a solicitation issued by the Department of Defense Strategic Acquisition Program Directorate for the procurement of battery chargers, specifically Panasonic Industrial Co part number FZ-VCBG21M, identified by NSN 6130-01-708-6325. The requirement is for an estimated quantity of 196 units, with a delivery timeframe of 127 days and shipping terms set as FOB Origin. This is a commercial off the shelf item procurement with inspection and acceptance occurring at the destination. The contract adheres to strict quality and packaging standards, incorporating DLA packaging requirements RP001 and marking standards per MIL-STD-129. Sampling methods must comply with MIL-STD-1916 or ASQ H1331, with specific verification levels assigned to critical, major, and minor attributes. Technical and quality requirements are governed by the DLA Master List, and the procurement is managed under a unilateral indefinite quantity and indefinite delivery structure.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 335999
New
DIBBS
TERMINAL JUNCTION B
Solicitation # SPE4A0-26-T-4597
This contract, identified as SPE4A0-26-T-4597, is for the procurement of one Terminal Junction B, identified by NSN 5940-01-536-2769. The requirement is issued by the Department of Defense Aviation Supply Chain ESOC Buys and is destined for the USS Jason Dunham DDG 109. Delivery is required within five days after order, with an original required delivery date of August 28, 2026. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and marking per MIL-STD-129. A critical prohibition is placed on the intentional use of mercury or mercury-containing compounds in the hardware, preservation, or packaging. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-U-3552
This contract is for the procurement of 862 blind rivets, identified by NSN 5320-01-305-4160 and part number NAS1669-4DL3. The items are classified as critical application commercial hardware and must be manufactured according to the current revision of the applicable non-government standards, specifically NAS1669 and NAS1675. The solicitation is a total small business set-aside under NAICS code 332510, issued by the Department of Defense ASC Commodities Division. Delivery is required within 221 days after the order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. Quality assurance and sampling will be conducted according to MIL-STD-1916 or ASQ H1331, with a strict requirement for zero non-conformances in the sample lot unless otherwise specified.
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-U-3665
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 2,490 blind and solid rivets under National Stock Number 5320-01-620-4782. The contract is designated as a total small business set-aside under NAICS code 332722. Delivery is required within 94 days after receipt of the order. The procurement is subject to specific technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. All items must adhere to MIL-STD-130N for the identification marking of U.S. military property. Responses to solicitation SPE4A6-26-U-3665 are due by September 17, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-U-3537
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 3,957 blind rivets under NSN 5320-01-185-2870. The contract is designated as a Total Small Business Set-Aside under NAICS code 332510, with a required delivery timeframe of 252 days after the order is placed. The agreement mandates strict adherence to DLA packaging, technical, and quality requirements, including specific protocols for configuration change management and bare item marking. Notably, the contract contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed mandatory export-control training to access sensitive information.
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
COLLAR, PIN-RIVET
Solicitation # SPE4A6-26-T-22GC
Solicitation SPE4A6-26-T-22GC is a total small business set-aside issued by the DLA Aviation ASC Commodities Division for the procurement of 1,797 pin-rivet collars under NSN 5320-00-298-6212. This critical application item must be manufactured according to TDP Rev C Gen 3 and specific reference drawings, including drawing 76301 23M117 Revision R. The required delivery date is April 25, 2027, with a need ship date of February 12, 2027, for delivery to DLA Distribution Warner Robins in Georgia. The contract mandates strict quality and technical standards, requiring manufacturer inspection systems to comply with SAE AS9003 or ISO 9001. Quality assurance involves zero-based sampling plans per MIL-STD-1916 or ASQ H1331, and all Class 3A and 3B threads must be gaged according to SAE AS8879 or MIL-S-7742. Packaging must adhere to ASTM D3951 and RP001, with marking and labeling following MIL-STD-129. Inspection and acceptance are both designated at the point of origin. Additionally, the provider must meet CMMC Level 2 self-assessment requirements and comply with the Buy American Act and Berry Amendment regarding domestic material sourcing.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-26BF
This contract is for the procurement of blind rivets, specifically part number NAS1921B05-03 under NSN 5320001652084. The total quantity requested is 14,171 units, split between two delivery locations: 4,121 units to DLA Distribution San Diego and 10,050 units to DLA Distribution Warner Robins. The items are classified as critical application hardware and must be manufactured according to the current revision of the applicable military or non-government part standards. Delivery is required within 99 days, with specific need ship dates in May and July 2026 and a final required delivery date of March 2, 2027. Inspection and acceptance will occur at the origin. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow RP001 requirements. Quality assurance and sampling will be conducted per MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in sample lots.
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-U-3619
This contract is a solicitation for the procurement of 2,221 machine bolts under NSN 5306-01-686-4912. The requirement is a total small business set-aside issued by the Department of Defense ASC Commodities Division. Delivery is required within 78 days after the order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The technical specifications follow ASME B18.24 Revision D and must adhere to the DLA Master List of Technical and Quality Requirements. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Packaging must be performed according to ASTM D3951 and MIL-STD-129, with palletization following the RP001 DLA packaging requirements.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
INSERT, SCREW THREAD
Solicitation # SPE4A6-26-U-3676
This solicitation is for the procurement of 493 screw thread inserts, identified by NSN 5325015250116, for the Department of Defense ASC Commodities Division. The items must be manufactured according to the current revision of the SAE MA3279 standard and are designated as critical application items. The contract is a total small business set-aside under NAICS code 332510, with delivery required within 10 days after receipt of order. Quality assurance is stringent, requiring inspection and acceptance at the origin using zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. The procurement is handled as a DLA direct CONUS delivery with a zero percent quantity variance allowed.
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
BOLT, EXTERNALLY RELIEV
Solicitation # SPE4A6-26-U-3703
This contract is for the procurement of 409 externally relieved hexagon head bolts, identified by NSN 5306014725391 and part number FTC 7590-3. The order is issued by the Department of Defense ASC Commodities Division under solicitation SPE4A6-26-U-3703 and is designated as a set-aside for Economically Disadvantaged Women-Owned Small Businesses. The items are classified as critical application items with a delivery requirement of 99 days and a strict zero percent quantity variance. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific protocols for source approval, packaging, and the removal of government identification from non-accepted supplies. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow the RP001 DLA packaging requirements.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
STUD ASSEMBLY, TURNLOCK
Solicitation # SPE4A6-26-U-3979
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-U-3979, is for the procurement of 885 units of Stud Assembly, Turnlock Fasteners. The items are identified by NSN 5325-01-408-7166 and part number 3506-SC38A-C3C, and are classified as commercial items. The contract is a Total Small Business Set-Aside under NAICS code 332510, with a required delivery timeframe of 66 days after receipt of order. The procurement is subject to specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. Additionally, the contract includes provision RQ011 regarding the removal of government identification from non-accepted supplies. The response deadline for this solicitation is September 17, 2026, and the primary point of contact is April Wynn.
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
STUD, PLAIN
Solicitation # SPE4A6-26-U-3937
This contract is a solicitation issued by the Department of Defense ASC Commodities Division for the procurement of 1,475 plain studs under solicitation number SPE4A6-26-U-3937. The items are identified by NSN 5307-01-145-1645 and are associated with part numbers from Parker Hannifin Corporation and Oshkosh Defense LLC. This is a total small business set-aside under NAICS code 332722, with delivery required within 40 days after receipt of order. The agreement specifies that delivery is FOB Origin, while inspection and acceptance will occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with specific adherence to DLA packaging requirements for procurement. The contract incorporates technical and quality requirements from the DLA Master List and mandates the removal of government identification from any non-accepted supplies.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
RIVET, SOLID
Solicitation # SPE4A6-26-U-3862
This contract is for the procurement of 1,681 solid rivets, identified by NSN 5320-00-574-1091 and part number MS20470AD4-28. The items must adhere to technical specifications NASM20470 Revision 3 and NASM5674 Revision 2. This is a total small business set-aside under NAICS code 332722, managed by the Defense Logistics Agency ASC Commodities Division. Delivery is required within 37 days after the order, with FOB, inspection, and acceptance all occurring at the origin. Packaging must comply with ASTM D3951, MIL-STD-129, and DLA packaging requirements. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance. The contract incorporates various DLA master list technical and quality requirements, including specific mandates for bare item marking and the removal of government identification from non-accepted supplies.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-U-3675
Contract SPE4A6-26-U-3675 is a federal solicitation issued by the Department of Defense ASC Commodities Division for the procurement of 180 machine screws. The items are identified by NSN 5305015292168 and part number 4131603-2 from Trivent Engineering, Inc. This is designated as a critical application item and a commercial item, with delivery required within 83 days after the order is placed. The shipping terms are FOB Origin, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements, specifically RP001 and ASTM D3951, with marking and labeling following MIL-STD-129. Identification marking must comply with MIL-STD-130N. Technical and quality requirements are governed by the DLA Master List, and the procurement includes a zero percent quantity variance. The primary point of contact for this acquisition is Faye Harvell.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details