Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Production Lot Testing (PLT) and Certification

Active

Federal

Response Deadline11/04/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, managed by the Department of Defense DLA Weapons Support ASC Supplier OEM Division, involves performing Production Lot Testing for prime contractors on aerospace supply contracts. The scope of work focuses on validating critical safety components against TDP Rev A Gen 1 tolerances, utilizing calibration-certified measuring tools to ensure precision. The contractor is responsible for generating detailed test reports with actual results and providing all necessary material and process certifications. Deliverables include certified test reports and validated samples, which must be shipped via traceable means to MCAS Cherry Point, NC. A key requirement for final acceptance is the QAR signature on the DD250 form. The performance of these services is centered in Phoenix, Arizona, under NAICS code 541380.

General Info

DoD subcontract for aerospace production lot testing and certified reporting in Phoenix, Arizona.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

PHOENIX, AZ, 85043, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-27-T-1958.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SPACER, SLEEVE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 27

subcontract

Response DeadlineNov 4

Submission deadline

Response Deadline

11/04/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs Production Lot Testing (PLT) for prime contractors on DLA aerospace supply contracts. Validates critical safety components against TDP Rev A Gen 1 tolerances, generates test reports with actual results, and provides material and process certifications. Ships PLT samples via traceable means to MCAS Cherry Point, NC. Requires calibration-certified measuring tools and QAR signature on DD250. Delivers certified test reports and validated samples.

Similar Contracts

Same NAICS industry code

Non-Destructive Testing (NDT) for OCS ConductorsThis subcontract involves providing independent non-destructive testing and inspection of aluminum conductors for prime contractors working on California High-Speed Rail Authority projects in Wasco, California. The primary objective is to verify that conductors comply with EN/IEC standards by identifying any existing defects, corrosion, or contamination. The selected provider is responsible for delivering comprehensive certified NDT test reports and formal compliance certifications. To ensure technical quality, all personnel performing the inspections must be certified under ASNT Recommended Practice No. SNT-TC-1A. This opportunity falls under NAICS code 541380, with a response deadline set for November 19, 2026.

California High-Speed Rail Authority

POSTED

about 4 hours ago

DEADLINE

Optical Performance Validation & TestingThe Optical Performance Validation and Testing subcontract is a U.S. Air Force initiative focused on the independent verification and validation of amplifier performance for prime contractors working on Low SWaP 2-micron fiber amplifier projects. The selected provider will be responsible for characterizing spectral purity, noise figure, and gain using beam profilers and Optical Spectrum Analyzers, ultimately delivering comprehensive performance validation data and technical test reports. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, specifically adhering to SBIR/STTR mandates for companies with fewer than 500 employees. Interested parties must submit their responses by November 25, 2026, to support this Department of Defense effort.

POSTED

about 4 hours ago

DEADLINE

Ultrasonic and Dye Penetrant Inspection ServicesThis subcontract for Ultrasonic and Dye Penetrant Inspection Services involves providing non-destructive testing for prime contractors supporting NAVSUP Weapon Systems Support projects. The scope of work includes performing ultrasonic inspections on starting materials and dye penetrant surface inspections on finished Union and Tailpiece components. All testing must be conducted using approved UT equipment and PT kits in strict accordance with EB Specification 2937 and NAVSEA T9074-AS-GIB-010-271. The contractor is responsible for delivering all required testing certifications and Certification Data CDRLs utilizing DD Form 1423. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties should note the response deadline of November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

Laser Testing and Metrology ServicesThe Laser Testing and Metrology Services subcontract is a U.S. Air Force initiative focused on providing independent verification and validation for prime contractors working on laser system projects. The scope of work involves conducting critical technical assessments, including beam profiling, power measurement, and stability testing. These activities are performed within high-power laser safety facilities utilizing specialized equipment such as beam analyzers and interferometers to produce essential performance validation data and technical test reports. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, specifically targeting firms with fewer than 500 employees in alignment with SBIR/STTR mandates. Interested parties must submit their responses by November 25, 2026, to support the U.S. Department of Defense in ensuring the operational integrity of advanced laser technologies.

POSTED

about 4 hours ago

DEADLINE

Facility & Equipment Provider

POSTED

about 4 hours ago

DEADLINE

Power Systems Testing and Validation ServicesThe Power Systems Testing and Validation Services subcontract supports U.S. Air Force Advanced Reserve Power Source Technologies projects by providing scientific testing, characterization, and validation of power source prototypes for prime contractors. The scope of work includes conducting cycle testing, thermal stability analysis, discharge rate testing, and environmental stress screening using calibrated laboratory equipment to deliver essential technical test reports and validation data. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, specifically adhering to SBIR/STTR mandates for companies with fewer than 500 employees. Interested parties must submit their responses by November 25, 2026, to support the U.S. Department of Defense and the U.S. Air Force in advancing power system technologies.

POSTED

about 4 hours ago

DEADLINE

Specialized Laboratory / Testing FacilityThis subcontract opportunity, issued by the U.S. Air Force under the Department of Defense, seeks a specialized laboratory and testing facility to support prime contractors on 2027 SBIR/STTR Phase I projects. The selected provider will be responsible for supplying necessary instrumentation and physical facilities, while performing critical environmental testing for radiation levels, waterborne effluents, and airborne emissions. Additionally, the contractor must possess the capability to safely handle toxic and hazardous materials and ensure all operations strictly comply with federal, state, and local environmental laws. The contract is designated as a Total Small Business Set-Aside, requiring the provider to have fewer than 500 employees in accordance with SBIR/STTR mandates. Operating under NAICS code 541380, the provider is expected to deliver comprehensive lab reports and test results. Interested parties must submit their responses by the deadline of November 25, 2026.

POSTED

about 4 hours ago

DEADLINE

TDR Sensor Performance TestingThe TDR Sensor Performance Testing subcontract is a U.S. Navy project focused on providing technical validation testing for prime contractors working on Tank Level Indicator systems. The primary objective is to ensure sensor accuracy by measuring signal attenuation and reflection changes following cleaning processes. To execute these tasks, the contractor must utilize Time Domain Reflectometry equipment and signal analyzers that maintain NIST traceable calibration, ultimately delivering comprehensive performance data sets and technical validation reports. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, specifically adhering to SBIR/STTR mandates for companies with fewer than 500 employees. Interested parties must submit their responses by November 25, 2026, to support the U.S. Department of Defense in maintaining critical naval sensor performance standards.

POSTED

about 4 hours ago

DEADLINE

Aviation Component Inspection and Test ServicesThe Aviation Component Inspection and Test Services subcontract involves performing critical inspections and testing for prime contractors supporting Department of the Air Force F110 engine projects. The primary objective is to certify that temperature sensors adhere to Critical Safety Item standards through rigorous testing conducted according to engineering drawings. The selected provider must utilize precision calibration equipment to generate detailed written documentation and material certifications. To qualify for this engagement, contractors must hold either AS9100 or ISO 9001-2015 certification. The scope of work culminates in the delivery of certified inspection and test reports to the Department of Defense via the Ok DLA Aviation office in Oklahoma City. Responses for this opportunity are due by December 2, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Electronic Component Testing and Inspection ServicesThe Electronic Component Testing and Inspection Services subcontract supports prime contractors on NAVSUP Weapon Systems Support projects within the Department of Defense. The scope of work involves performing specialized testing and quality conformance examinations to verify that repaired circuit cards meet all required performance specifications. This process includes conducting environmental stress, temperature, and humidity testing utilizing automated test equipment, oscilloscopes, and environmental chambers. The selected provider is responsible for delivering comprehensive test reports and certified quality conformance documentation. This opportunity falls under NAICS code 541380 and was posted on October 28, 2026, with a response deadline of November 27, 2026.

Navsup Weapon Systems Support

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Specialized Testing and Validation ProviderThe Specialized Testing and Validation Provider subcontract is a U.S. Air Force opportunity designated as a Total Small Business Set-Aside under the SBIR/STTR mandate for firms with fewer than 500 employees. The selected provider will support prime contractors on Department of Defense STTR projects by performing critical tests, assays, or simulations to prove technology feasibility. This work involves utilizing specialized equipment for chemical analysis, material testing, or software stress testing, with a requirement to deliver certified data results and comprehensive test reports. Compliance is a key component of this contract, as providers must adhere to approved protocols and certifications regarding Recombinant DNA or Human and Animal Subjects. Interested parties must submit their responses by November 25, 2026. The contract falls under NAICS code 541380 and is focused on providing the technical validation necessary to advance defense technology initiatives.

POSTED

about 4 hours ago

DEADLINE

Materials Testing and Quality AssuranceThe Materials Testing and Quality Assurance subcontract for the Lakehaven Water and Sewer District involves providing independent materials testing services for prime contractors. The scope of work includes testing water distribution materials upon delivery, verifying the grade and density of Hot Mix Asphalt, and confirming the compaction of backfill and Controlled Density Fill. Qualified bidders must utilize an accredited testing laboratory to perform these services and are responsible for delivering all necessary material testing reports and certifications. The response deadline for this opportunity is November 17, 2026.

Lakehaven Water and Sewer District

POSTED

about 4 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Supply of Flat Washers (NSN 5310-01-625-5545)This subcontract involves the supply of 54 flat washers for prime contractors supporting DLA Weapons Support ASC projects. The required parts are identified by NSN 5310-01-625-5545 and Boeing PN 4M405-001, with delivery terms set as FOB Origin. Performance will take place in New Cumberland, Pennsylvania. The contractor must adhere to strict quality and compliance standards, including SAE AS9003 or ISO 9001 quality systems and a CMMC Level 2 Self-Assessment. Quality control must be performed according to MIL-STD-1916 or ASQ H1331, with packaging and shipment marking following ASTM D3951 and MIL-STD-129 respectively.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Commercial Wire Rope (NSN 4010015953882)This subcontract involves the supply of specialized commercial wire rope, specifically matching NSN 4010015953882 and Part Number CL-3-SC-1000FT, to support prime contractors delivering on Department of Defense contracts for the DLA Weapons Support ASC Supplier OEM Division. The scope of work requires the delivery of four units of packaged and labeled wire rope, with performance taking place in New Cumberland. Strict adherence to technical and regulatory standards is mandatory, including packaging per ASTM D3951 and MIL-STD-129 and palletization according to RP001. The provider must ensure full compliance with the Buy American Act, the Berry Amendment, and DFARS Cybersecurity standards. The response deadline for this opportunity is November 4, 2026.

POSTED

about 23 hours ago

DEADLINE

Supply of Socket Head Cap Screws (NSN 5305017060326)This subcontract involves the manufacture or procurement of 30 socket head cap screws, identified by NSN 5305017060326 and part number 3M1345-도BA, to support prime contractors on DLA Weapons Support ASC projects. The supplier must ensure all units adhere to DLA Master List requirements RA001, RP001, RQ011, and RQ017, with packaging and marking strictly following MIL-STD-2073-1E and MIL-STD-129 standards. The contract mandates full compliance with the Buy American Act and the Berry Amendment. Once completed, the 30 packaged screws are to be delivered to the Naval Air Systems Command Central Kitting Activity. This effort is managed under the Department of Defense via the DLA Weapons Support ASC Supplier OEM Division, with performance centered in Orange Park, Florida.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Aircraft Gas Turbine Engine Air Seal SupplierThis subcontract involves the manufacture or sourcing of 290 aircraft gas turbine engine air seals, specifically GE part number 9688M07P02, for delivery to DLA Distribution San Diego. The supplier must ensure all units of NSN 2840001174916 comply with the DLA Master List of Technical and Quality Requirements, the Buy American Act, and are certified as mercury-free. Strict adherence to military standards is required, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contract is managed under the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division, with performance taking place in San Diego.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 23 hours ago

DEADLINE

MIL-SPEC Aerospace Packaging and Freight ServicesThis subcontract for MIL-SPEC Aerospace Packaging and Freight Services involves providing specialized packaging, marking, and transport for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work requires strict adherence to military standards, including MIL-STD-129, RP001, RP003, and MIL-STD-2073-1E, specifically for FAA commercial material. The contractor is responsible for utilizing appropriate preservation materials and secure transport methods to handle oversized aircraft components. The specific deliverable for this engagement is the transport of two aircraft doors from the point of origin to the DLA Distribution Depot Oklahoma located at Tinker AFB. This project falls under NAICS code 484220 and is managed by the Department of Defense. Interested parties must respond by November 4, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 23 hours ago

DEADLINE

Aircraft Door (Boeing P/N 112N6012-1) SupplierThis subcontract involves the supply of two complete aircraft door assemblies, specifically Boeing part number 112N6012-1, for prime contractors supporting DLA Weapons Support ASC projects. The selected supplier is responsible for the manufacture or procurement of these assemblies in strict accordance with technical specifications, ensuring full supply chain traceability per DLAD Procurement Note C03 and adhering to quality inspection standards MIL-STD-1916 or ASQ H1331. Final deliverables must include Certificates of Airworthiness and Conformance. To qualify, the supplier must maintain FAA Airworthiness Approval, ISO 9001:2015 certification, and CMMC Level 2 compliance. The project is managed under NAICS code 336413 for the Department of Defense, with the place of performance located at Tinker AFB. Interested parties must submit their responses by November 4, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Rack Cover (NSN 2915-01-201-1658)This subcontract involves the manufacture or procurement of a rack cover identified by NSN 2915-01-201-1658 for the DLA Weapons Support ASC Supplier OEM Division. The contractor is responsible for delivering one unit to the DLA Distribution Depot Oklahoma at Tinker AFB, ensuring the product meets all technical requirements specified in the DLA Master List. Strict adherence to quality and security standards is required, including ISO 9001:2015 certification and compliance with MIL-STD-129 for marking and shipment. Additionally, the provider must comply with DFARS 252.204-7012 and NIST SP 800-171 regulations. The opportunity is categorized under NAICS code 332322, with a response deadline of November 4, 2026.

Sheet Metal Work Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Compressor Vanes for Aircraft Gas Turbine EnginesThis subcontract involves the manufacture or sourcing of nine aircraft gas turbine engine compressor vanes made from high-temperature alloys for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The selected provider must ensure all units are marked according to MIL-STD-129 and packaged in compliance with MIL-STD-2073-1E. The contract requires the supplier to be registered in SAM.gov and deliver the components FOB Origin within a 152-day timeframe. Performance for this requirement is centered in San Diego, California, under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

Manufacturer of Special Cable Assembly (NSN 6150-01-356-8642)This subcontract involves the manufacture or procurement of one Special Cable Assembly, identified by NSN 6150-01-356-8642, to support prime contractors for the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider must ensure the assembly is packaged and marked in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 palletization standards, with delivery terms set as FOB Origin. The contractor is required to disclose the origin of all materials used and confirm the absence of covered defense telecommunications equipment. This opportunity falls under NAICS code 335999, with the place of performance located in New Cumberland, Pennsylvania. Responses are due by November 4, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 23 hours ago

DEADLINE

Defense-Compliant Packaging and Palletization ServicesThis subcontract for Defense-Compliant Packaging and Palletization Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves the specialized packaging of finished bolts according to ASTM D3951, labeling and marking per MIL-STD-129, and palletization in accordance with DLA requirement RP001. The service provider must utilize MIL-SPEC materials and compliant equipment while maintaining a thorough understanding of the DLA Master List of Technical and Quality Requirements to ensure all goods are prepared for FOB Origin shipment. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, the work is to be performed in New Cumberland, Pennsylvania. The opportunity is categorized under NAICS code 561910, with a response deadline set for November 4, 2026.

Packaging and Labeling Services

POSTED

about 23 hours ago

DEADLINE

Supply of Aerospace/Defense Grade Bolt StockThis subcontract involves the supply of aerospace and defense grade raw metal stock to prime contractors working on DLA Weapons Support ASC projects. The primary objective is to provide high-grade alloy steel or specialty metal stock specifically meeting NSN 5306016515394 requirements for the manufacture of close tolerance bolts. To ensure quality and compliance, the supplier must provide Mill Test Reports for material certification and strictly adhere to the Buy American Act and the Berry Amendment regarding domestic sourcing. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, the contract falls under NAICS code 331210. Performance for the delivery of certified raw material stock is centered in New Cumberland. Interested parties must note the response deadline of November 4, 2026, to be considered for this procurement effort.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 23 hours ago

DEADLINE

Precision Manufacturing of Close Tolerance BoltsThis subcontract involves the precision machining and manufacturing of 39 close tolerance bolts to NSN 5306016515394 specifications for the DLA Weapons Support ASC Supplier OEM Division. The project requires the use of traditional manufacturing methods and precision CNC equipment, specifically prohibiting the use of additive manufacturing. Performance will take place in New Cumberland, Pennsylvania. To be eligible, the contractor must hold ISO 9001:2015 certification and maintain CMMC Level 2 compliance. Additionally, all work must adhere to DFARS prohibitions regarding hexavalent chromium. The response deadline for this requirement is November 4, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

First Article and Production Lot Testing (FAT/PLT)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 23 hours ago

DEADLINE

Production Lot Testing (PLT) Support

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 23 hours ago

DEADLINE

First Article Testing (FAT) Services

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

First Article Testing and Validation for Cushioning Pads

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

First Article Testing (FAT) and Quality Conformance Inspection

Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

Production Lot Testing and Quality Validation

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

First Article Testing (FAT) Services for Air Filter Elements

DDSP NEW CUMBERLAND FACILITY

POSTED

about 23 hours ago

DEADLINE

Production Lot Testing (PLT) for CuNi Flanges

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

First Article Testing (FAT) and Quality Validation

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Third-Party Quality Assurance and Airworthiness Certification

POSTED

about 23 hours ago

DEADLINE

FAA Airworthiness Certification & Traceability Audit

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 23 hours ago

DEADLINE

Cable Continuity and Isolation Testing Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS