Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Production Surge Planning & Technical Documentation

Active

Federal

Response Deadline08/24/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the development of a comprehensive Production Surge Plan aligned with DID DI-P-1634B, focusing on the structured buildup of production capacity and the seamless integration of subcontractors into the manufacturing workflow. This includes detailed schedules that outline the ramp-up timeline for components and systems, ensuring readiness to meet increased demand while maintaining quality and compliance standards. Technical documentation must be thorough, supporting traceability, coordination, and accountability across all tiers of the supply chain. The effort is classified as a subcontract under NAICS code 541330, issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City, with responses due by August 24, 2026. The plan must be fully executable, addressing resource allocation, workforce scaling, logistics coordination, and risk mitigation strategies to support surge conditions without disrupting existing operations. All deliverables are expected to be technically sound, clearly structured, and ready for immediate implementation upon approval.

General Info

Develop Production Surge Plan per DID DI-P-1634B for DoD, ramping capacity with subcontractors by August 24, 2026.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma CityView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

OK, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineAug 24

Submission deadline

Response Deadline

08/24/2026, 08:00:00 PM UTCin 30 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Develop a comprehensive Production Surge Plan per DID DI-P-1634B, including production buildup schedules and subcontractor integration.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite Delivery/Indefinite Quantity contract for a range of major construction initiatives. These services will support all phases of project delivery including planning, design, construction, and closeout for various delivery methods such as Design Build, Progressive Design Build, and other alternative delivery approaches. The contractor will be responsible for ensuring that all projects align with approved schedules, budgets, and quality standards, acting as a key partner in the successful execution of the Port’s capital improvement efforts. The contract does not specify a set-aside type and is categorized under NAICS code 541330, reflecting its focus on architectural and engineering services related to construction management. Primary point of contact for inquiries is Hala Rabbo, with additional support available from Project Manager Ann Davidson. Both can be reached via phone and email provided through the Port’s official channels. The solicitation is posted as a forecast with no solicitation number assigned yet, indicating it is an upcoming opportunity for industry engagement. There is no designated place of performance specified beyond its association with the Port of Seattle, suggesting work may occur across multiple project sites within the Port’s jurisdiction. All prospective bidders should refer to the official UI link for updated details and future solicitation releases.

Construction Management

POSTED

about 7 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, operating within a demanding 24/7/365 environment. The scope includes identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance performance, energy efficiency, occupant comfort, system reliability, and longevity while ensuring compliance with safety and regulatory standards. All work will be executed through Service Directives and coordinated closely with Aviation Facilities and Infrastructure to meet defined deliverables and operational needs. The contract is structured as an IDIQ vehicle under NAICS code 541330, managed by the Port of Seattle’s Aviation Facilities and Infrastructure division. Primary point of contact is Jason Gates, with Jim Farris serving as project manager; all inquiries and coordination should be directed through the provided contact information. Work will occur at the airport and is intended to support continuous, safe, and efficient operations without disruption to daily flight activities.

Aviation Facilities & Infrastructure

POSTED

about 7 hours ago

DEADLINE

On-Site Security System Testing & Compliance VerificationThe contract titled On-Site Security System Testing & Compliance Verification requires the performance of scheduled functional testing on security alarm components to ensure operational integrity and adherence to federal standards. Tasks include verifying system functionality, documenting test results, and providing support necessary for annual certification. All work must be conducted on-site at the specified location in Salem, with a zip code of 01970, and must meet rigorous compliance benchmarks tied to federal requirements for security systems. The contractor is expected to deliver thorough and accurate records to facilitate regulatory certification. This is a subcontract under NAICS code 541330, posted by the Department of the Interior through its office Ner Services Mabo (43000). The solicitation opened on July 25, 2026, with a deadline for responses set for August 7, 2026, at 2:00 PM. No set-aside classification is designated, and the contract is not associated with a specific point of contact or additional office address beyond the place of performance. All work must be completed in accordance with the stated federal compliance framework and submitted for certification purposes within the contractual obligations.

Ner Services Mabo (43000)

POSTED

about 12 hours ago

DEADLINE

PROFESSIONAL ON-CALL AIRPORT PLANNING SERVICES FOR EAST GEORGIA REGIONAL AIRPORTThe City of Swainsboro is soliciting proposals for professional on-call airport planning services to support the Airport Capital Improvement Plan at East Georgia Regional Airport. The contract seeks a qualified aviation consulting firm to provide expert planning, design, and technical advisory services as needed over the term of the agreement, ensuring alignment with federal, state, and local aviation standards. All work will be performed in Georgia and is intended to enhance the airport’s infrastructure, operations, and long-term development goals. Proposals must be submitted by August 13, 2026, and the solicitation number is PE-66723-NONST-2026-000000019. The contracting authority is the City of Swainsboro, with Jerry Cadle of Cadle Law Firm serving as the primary point of contact for inquiries, reachable via email at Jerry@cadlelawfirm.com. This is a state and local government procurement under the SLED category, and while no specific set-aside or NAICS code is listed, the solicitation is open to qualified firms with demonstrated experience in airport planning and capital improvement projects.

City of Swainsboro

POSTED

DEADLINE

On-Call Planning, Resilience, and Community Development ServicesThe Coastal Bend Council of Governments is seeking qualified firms and multidisciplinary consultant teams to provide on-call professional services under an Indefinite Delivery/Indefinite Quantity contract for planning, resilience, community development, housing, economic development, and infrastructure planning. These services will support a wide range of local, regional, state, and federally funded initiatives across the Coastal Bend region, beginning with the preparation of a Comprehensive Plan for the City of Refugio, Texas, with additional task orders expected to serve other municipalities, counties, special districts, and grant-driven projects as funding becomes available. The solicitation aims to establish a pool of capable providers who can deliver timely, high-quality technical assistance to regional stakeholders. Firms interested in participating must submit Statements of Qualifications by the August 31, 2026 deadline, and selections will be made based on demonstrated expertise, capacity, and relevance to the anticipated scope of work. The contract is managed by the Coastal Bend Council of Governments, based in Corpus Christi, Texas, with primary point of contact Mary Afuso and Executive Director Emily Martinez available for inquiries. There is no set-aside designation, and the contract will remain open to qualified firms nationwide, with the goal of securing one or more providers to meet ongoing and future needs across the region. All submissions and correspondence must be directed through the designated contacts listed in the solicitation.

COASTAL BEND COUNCIL OF GOVERNMENTS

POSTED

DEADLINE

in about 1 month

Consultancy Services for Car Park and Solar Farm Integration TFACCThe Department of Correctional Services under the Government of Jamaica is seeking consultancy services to integrate a car park with a solar farm at the Tamarind Farm Adult Correctional Centre. The solicitation, identified by number 1662/267, was posted on July 24, 2026, with a response deadline of August 19, 2026, inviting qualified professionals or firms to submit proposals for comprehensive design, planning, and implementation advice regarding the co-location of parking infrastructure and renewable energy generation. The project aims to enhance sustainability and operational efficiency at the correctional facility by combining vehicle parking with photovoltaic solar energy systems, requiring expertise in civil engineering, solar energy systems, spatial planning, and government compliance standards. All work is to be performed at the Tamarind Farm site in Jamaica, with no specific set-aside provisions or NAICS code designated, and the contract is open to any eligible party meeting the technical and procedural requirements outlined in the solicitation. Proposals must be submitted through the official eProcurement portal before the deadline to be considered.

Department of Correctional Services

POSTED

DEADLINE

PROFESSIONAL ON-CALL AIRPORT ENGINEERING, ARCHITECTURAL & CONSTRUCTION INSPECTION/ADMINISTRATION CONThe City of Swainsboro is soliciting qualified aviation consulting firms to provide on-call professional services related to the Airport Capital Improvement Plan at the East Georgia Regional Airport. The scope of work encompasses a full range of engineering, architectural, and construction inspection/administration services including project planning, geotechnical and subsurface investigations, topographic surveying, environmental assessments, preliminary and final design, bidding support, and ongoing construction oversight. The firm selected will be expected to deliver comprehensive technical expertise across all phases of airport infrastructure development, ensuring compliance with regulatory standards and efficient project execution. Responses to this solicitation must be submitted by August 13, 2026, at 5:00 PM, and the opportunity is posted under solicitation number PE-66723-NONST-2026-000000017, with a posting date of July 24, 2026. The contract is issued by the City of Swainsboro in Georgia and is intended for use by state, local, or educational entities. All inquiries and communications should be directed to Jerry Cadle at jerry@cadlelawfirm.com. The services will be performed at the East Georgia Regional Airport, and the selected vendor will be required to maintain a high standard of professionalism and technical competence in support of the airport’s long-term infrastructure goals.

City of Swainsboro

POSTED

DEADLINE

Quality Inspection and Compliance ServicesThe contract requires third-party services to perform mechanical testing, dimensional verification, and quality assurance on U-bolt hardware to ensure adherence to implied government and industry standards before acceptance in Texas. These inspections are critical to verifying that the hardware meets required performance and safety criteria, with all work to be completed in compliance with applicable regulations without explicit written specifications. The scope is focused strictly on pre-acceptance validation to mitigate risk and ensure compatibility with state transportation infrastructure demands. Issued by the Texas Department of Transportation under NAICS code 541330, this subcontract is open for response until August 14, 2026, with a posting date of July 24, 2026. The place of performance is in Texas, though specific location details are not provided. The contract does not specify a set-aside type or point of contact, and inquiries must be directed through the public portal linked in the posting. All submissions must demonstrate capability to deliver accurate, verifiable testing results aligned with industry norms governing U-bolt reliability under load and environmental stress.

Texas Department of Transportation

POSTED

DEADLINE

Independent Quality Assurance / Owner’s Verification Firm (OVF)The contract seeks an Independent Quality Assurance / Owner’s Verification Firm to perform independent reviews and verifications of design documents, construction plans, and contractor submissions to ensure full compliance with contractual obligations and applicable regulatory standards. The firm will serve as a neutral third party tasked with validating the accuracy, completeness, and adherence of all technical and procedural elements throughout the project lifecycle, acting on behalf of the owner to mitigate risk and uphold quality expectations. This role requires deep expertise in engineering and construction standards, as well as the ability to identify discrepancies or noncompliance before they impact project delivery. The opportunity is classified as a subcontract under NAICS code 541330, which pertains to engineering services, and is issued by the Georgia office of the Department of Transportation. The solicitation was posted on July 24, 2026, with a mandatory response deadline of August 24, 2026. No specific place of performance or set-aside criteria are indicated, and while contact information is not provided in the data, interested parties must respond through the official portal linked in the solicitation. The nature of the work demands rigorous attention to detail, technical proficiency, and a proven track record in independent verification within public infrastructure projects.

Department of Transportation-2

POSTED

DEADLINE

Transportation Engineering Design ServicesThe contract seeks qualified firms to provide comprehensive civil and transportation engineering design services focused on the alignment of express lanes, modifications to interchanges, installation of signage, and geometric layout adjustments. All design work must strictly adhere to technical standards set by the Georgia Department of Transportation and the Federal Highway Administration to ensure safety, efficiency, and regulatory compliance. The scope requires detailed engineering analysis and documentation to support infrastructure improvements aimed at enhancing traffic flow and system integration within the state’s transportation network. Bidders must submit proposals by August 24, 2026, with the solicitation classified as a subcontract under NAICS code 541330 for architectural and engineering services. The contract is issued by the Georgia Department of Transportation under the agency designation Department of Transportation-2, and while specific location details are not provided, performance is expected to occur within Georgia. Interested parties can access full solicitation information through the provided state portal link, and proposals must demonstrate technical expertise, experience with state and federal transportation standards, and the ability to deliver precise, compliant engineering solutions.

Department of Transportation-2

POSTED

DEADLINE

RFQ 484-082426 GEC and OVF Services for I-75 South Express Lanes PI #0020636The Georgia Department of Transportation is soliciting proposals for General Engineering Consulting and Owner’s Verification Firm services related to the I-75 South Express Lanes project under PI number 0020636. The solicitation, identified as PE-48401-RFQ-2027-000000616, was posted on July 24, 2026, with responses due by August 24, 2026. The work will be performed entirely within the state of Georgia and encompasses technical engineering support and independent verification services to ensure compliance with project standards, safety protocols, and contractual obligations. This engagement will require qualified firms to provide expert consultation throughout the design and construction phases, including review of plans, specifications, and construction progress, as well as verification of contractor performance and adherence to state and federal regulations. The contract is open to vendors under a sole source or competitive solicitation framework with no specific set-aside designation, and all interested parties must submit proposals through the designated state procurement portal. Temekia Arnold of the Georgia Department of Transportation serves as the primary point of contact, available via phone and email for inquiries regarding technical requirements, submission guidelines, and evaluation criteria. Proposals must demonstrate relevant experience in transportation infrastructure projects, particularly with express lane systems, and a proven ability to deliver objective, real-time verification services. Contractors will be expected to maintain close coordination with state engineers and respond promptly to emerging project needs without disrupting ongoing operations.

Department of Transportation-2

POSTED

DEADLINE

Engineering & Grant Management Services for Water and Wastewater System Resiliency ProjectsThe contract seeks engineering and grant management services to enhance the resilience of water and wastewater infrastructure in Darien, Georgia, in response to the impacts of Hurricane Helene. It encompasses three key projects: upgrading the New River Road Pump Station by replacing outdated pumps, installing a reliable generator, expanding the waterproof wet well, and increasing forcemain capacity; improving the Public Works Pump Station through pump replacement, control panel upgrades, and adding a backup generator to ensure continuity during outages; and modernizing the Wastewater Treatment Plant by replacing aging equipment, adding a new headworks system for pre-treatment redundancy, repairing existing headworks, and implementing electrical improvements to reduce vulnerability to failures. These upgrades aim to strengthen system reliability, prevent service disruptions, and build long-term resilience against future extreme weather events. The solicitation, identified as PE-66435-NONST-2027-000000002, was posted by the City of Darien under the State and Local Government (SLED) category and is open for responses until August 27, 2026. Primary contact for inquiries is Amy Hitt, whose email is listed for correspondence. The work will be performed entirely within Georgia, with no specific city or ZIP code provided in the address details. The goal is to secure expert support for technical design, grant compliance, and project management to ensure efficient use of funds and successful implementation of infrastructure improvements critical to public health and environmental protection.

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

Production Equipment & Tooling AssessmentThe contract seeks a qualified contractor to evaluate the current production equipment and tooling required to support surge operations, with the goal of identifying capacity gaps and recommending necessary upgrades or new additions to enhance operational efficiency. The assessment must focus on aligning existing infrastructure with increased production demands, ensuring that all recommendations are technically sound, cost-effective, and capable of sustaining high-volume output under accelerated timelines. The work will involve onsite evaluations, collaboration with production teams, and the delivery of detailed analyses that justify proposed investments in machinery, automation, or auxiliary tools. This subcontract is issued under NAICS code 333242, which pertains to the manufacturing of industrial machinery, and is managed by the Department of Defense through Ok DLA Aviation at Oklahoma City. The opportunity was posted on July 24, 2026, with a firm response deadline of August 24, 2026. There is no specified set-aside designation, and performance is expected to occur at an undefined location associated with the contracting office. Interested parties must submit responses by the stated deadline to be considered, and the solicitation is accessible through the SAM.gov platform for full details and submission requirements.

Semiconductor Machinery Manufacturing

POSTED

DEADLINE

Strategic & Critical Materials SourcingThe contract seeks to identify strategic and critical materials essential for defense operations, evaluate potential supply chain vulnerabilities, and propose qualified alternative materials to ensure continuity during periods of surge demand or disruption. The work will involve analyzing supply chain dependencies, assessing risks such as geopolitical instability, production bottlenecks, or single-source dependencies, and recommending viable substitute options that meet performance, regulatory, and operational requirements without compromising mission readiness. The effort is classified as a subcontract under NAICS code 541690, indicating it falls under other scientific and technical consulting services. It is sponsored by the Department of Defense through the Ok DLA Aviation office in Oklahoma City and is open for bids with a deadline of August 24, 2026. The scope demands a deep understanding of materials science, defense logistics, and global supply dynamics, with deliverables focused on actionable recommendations that enhance resilience and reduce exposure to supply chain shocks. Performance location details are not specified, but the work will directly support Department of Defense sustainment objectives.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Skilled Labor Planning & Workforce Scaling StrategyThe contract requires the development of a comprehensive workforce strategy to address skilled labor demands during periods of operational surge, focusing on recruitment, training, and retention initiatives tailored to critical aviation support functions. The effort centers on identifying current and projected skill gaps, designing scalable training programs to rapidly onboard and upskill personnel, and implementing retention measures to stabilize the workforce amid high-turnover environments. This subcontract supports the Department of Defense’s Oklahoma City-based defense logistics activity, with performance tied to maintaining mission readiness through a resilient, adaptable labor force. The solicitation is open for responses until August 24, 2026, under the NAICS code 541612 for management consulting services, indicating the need for strategic advisory expertise rather than direct labor provision. The work must be executed in alignment with the organizational priorities of the Defense Logistics Agency Aviation, with no specific set-aside criteria mentioned, allowing broad eligibility for qualified subcontractors. Successful proposers will need to demonstrate proven experience in workforce planning within defense or high-tempo operational contexts, with methodologies that can be rapidly deployed and measured for impact. All deliverables must support long-term workforce sustainability while addressing immediate surge requirements.

Human Resources Consulting Services

POSTED

DEADLINE

Critical & Long-Lead Items AnalysisThe contract titled Critical & Long-Lead Items Analysis requires the identification and detailed analysis of critical and long-lead subcontracted components essential to defense procurement, with a focus on part numbers, supplier lead times, and dependencies that could impact program timelines and supply chain resilience. This effort is targeted at ensuring the Department of Defense’s Ok DLA Aviation in Oklahoma City maintains visibility into mission-critical parts that may introduce risk due to extended procurement cycles or sole-source suppliers. The scope demands thorough evaluation of subcontractor performance capabilities, potential bottlenecks, and alternatives to mitigate disruption risks across the aerospace and defense logistics network. The opportunity is classified as a subcontract under NAICS code 423830 and is open for response until August 24, 2026, with submissions due by 8:00 PM Eastern Time. No set-aside classification has been designated, indicating the contract is open to all qualified subcontractors regardless of business size or status. The solicitation is issued under the Department of Defense and managed through the Defense Logistics Agency’s aviation division, emphasizing the strategic importance of component reliability for military readiness. The place of performance and point of contact details are not specified, suggesting that the work may be performed remotely or at multiple locations, with evaluation based solely on the technical merit of submitted analyses.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Subcontract Management & Small Business Participation CoordinationThe contract supports administrative functions related to subcontractor engagement for the Department of Defense, specifically under the Ok DLA Aviation office in Oklahoma City. Despite there being no formal small business set-asides or designated set-aside type, the work involves proactive outreach to small businesses and the coordination of participation efforts to ensure compliance and transparency in subcontracting activities. Key responsibilities include managing documentation, maintaining reporting standards, and facilitating communication between prime contractors and smaller vendors to foster inclusive contracting practices. The solicitation is open for responses through July 31, 2026, and is classified under NAICS code 541611, which pertains to management consulting services. The scope centers on administrative support rather than direct service delivery, emphasizing process management, data tracking, and stakeholder coordination to uphold federal subcontracting expectations even in the absence of mandated set-asides. Performance location and point of contact details are not provided, and the work is likely performed remotely or at the agency’s existing facilities in Oklahoma City.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Logistics, Packaging, and UID Marking ServicesThe contract covers logistics, packaging, and UID marking services required to securely package and preserve delivered units in full compliance with Department of Defense standards. The primary objective is to ensure full traceability and adherence to asset management requirements through proper UID marking, guaranteeing each item is identifiable and trackable throughout its lifecycle. All packaging and preservation procedures must meet rigorous DoD specifications to maintain integrity and readiness during storage and transit. This subcontract is open for response until July 31, 2026, and falls under NAICS code 561990 for other miscellaneous support activities. The contracting office is the Ok DLA Aviation based in Oklahoma City under the Department of Defense, with performance expected to align with federal asset management protocols. While the place of performance and point of contact details are unspecified, compliance with all DoD packaging, preservation, and UID marking guidelines is mandatory for award consideration.

All Other Support Services

POSTED

DEADLINE

Technical Data Package (TDP) and Engineering Support ServicesThe contract seeks technical documentation, design data, and engineering support services for the integration, testing, and sustainment of a control unit, with potential use of reverse engineering to fulfill requirements. The work involves delivering a comprehensive Technical Data Package (TDP) to enable full lifecycle management of the system, ensuring accurate reproduction, modification, and operational readiness of the control unit under military specifications. Technical deliverables are critical for maintaining interoperability, performance, and long-term viability of the system across operational environments. The engagement is structured as a subcontract under NAICS code 541330, indicating engineering services, and is issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. The solicitation was posted on July 24, 2026, with responses required by July 31, 2026, indicating a narrow window for prospective contractors to demonstrate technical capability, past performance in aerospace or defense systems, and experience with sensitive reverse engineering tasks. The contract does not specify a set-aside status, making it open to general industry participation, and execution of work is expected to occur at unspecified locations under the federal government’s operational directives.

Engineering Services

POSTED

DEADLINE

Landing Gear Status Control Unit Manufacturing & AssemblyThe contract requires the design, fabrication, integration, and delivery of a spare landing gear status control unit designated as part number 8-490-12 with national stock number 6340-01-708-4202, specifically for use on the B-2 aircraft. This unit must include all necessary electronic components housed within a robust metal enclosure to meet operational and environmental standards for military aviation systems. The work involves full lifecycle manufacturing from initial component assembly through final integration and testing, ensuring compatibility, reliability, and conformity to technical specifications for critical flight systems. The opportunity is structured as a subcontract under the Department of Defense, managed by DLA Aviation in Oklahoma City, and falls under the NAICS code 334511 for aircraft and parts manufacturing. The solicitation was posted on July 24, 2026, with a firm response deadline of July 31, 2026, at 4:59 PM. The place of performance and specific delivery location are not detailed, but the unit must be delivered in a condition ready for immediate installation and operational use on B-2 platforms. All work must comply with defense-grade quality and documentation requirements without public disclosure of point of contact or set-aside status.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

CONTROL, ALARMThe solicitation SPRTA1-24-R-0127 seeks spares for the CONTROL, ALARM system with NSN 6340-01-708-4202 and part number 8-490-12, specifically for use on the B-2 aircraft. The item is a metal-cased electronic unit measuring 36.50 inches in length, 26.50 inches in width, and 9.50 inches in height, weighing 90.30 ounces, and is required in a quantity of eight units to be delivered to location SW3211 no later than December 8, 2026. The acquisition is not set aside and is being conducted under sole-source authority due to the limited number of responsible sources, with Northrop Grumman designated as the primary contractor and Eldec Aerospace Corporation as the subcontractor. The Government does not own manufacturing data rights, and potential offerors are directed to contact the OEM for access to technical data. UID labeling is mandatory, and export control restrictions do not apply. Electronic submission through SAM.gov is required, with no hardcopies provided. The contract award is contingent upon the availability of appropriated funds, and no liability is incurred until funding is confirmed in writing. Price and past performance are key evaluation factors, with no reliance on commercial item acquisition policies under Part 12. Foreign firms must consult with the contracting officer prior to submitting proposals due to potential participation restrictions. A designated Ombudsman is available to address contractor concerns during proposal development, though they do not influence evaluation or award decisions. Questions regarding the solicitation should be directed to Michael Hannan at micahel.hannan.1@us.af.mil, with all responses due by May 29, 2024, despite the later posted date listed in the data, which appears to be an error.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

C-130 Butterfly ValveThe solicitation SPRTA126R0266, issued by the Department of Defense through DLA Aviation at Tinker Air Force Base, Oklahoma, seeks a contractor to support the production of a C-130 Butterfly Valve by establishing and demonstrating a robust Production Surge Plan in accordance with Data Item Description DI-P-1634B. The plan must outline the contractor’s ability to rapidly scale production to meet national defense demands, including detailed assessments of maximum sustainable production rates, monthly buildup schedules, critical and long-lead components (both subcontracted and non-subcontracted), skilled labor availability and recruitment strategies, strategic material sourcing and approved substitutes, and required production equipment and tooling enhancements. The performance location is fixed at Tinker AFB, OK, with no specified delivery or FOB terms, and no formal contract value, pricing structure, or type such as FFP or IDIQ has been disclosed. Submission is due by August 24, 2026, with no set-aside provisions applied, meaning all eligible offerors may compete. The evaluation process lacks defined criteria, weights, scoring methodology, or basis of award such as LPTA or trade-off, indicating that while the required content elements are mandatory, their use in source selection remains unspecified. No standard FAR clauses, Section K certifications, packaging or marking requirements, inspection criteria, or special provisions such as security clearances, key personnel, or contract options are included in the documentation provided. The contractor is expected to submit the Production Surge Plan in its own format without page or word limits, though electronic delivery is implied. The solicitation does not include payment details, contracting officer or technical representative assignments, invoicing methods, or government accounting codes, leaving administrative execution details to be defined later in the award process.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Container Delivery and Transportation ServicesThe contract entails the transportation of completed steel shipping containers from the contractor’s facility to Tinker Air Force Base in Oklahoma City, encompassing full logistics coordination to ensure timely and compliant delivery. The work must adhere strictly to the established delivery schedule and meet all Department of Defense requirements for handling and transit of military-grade containers. This is a subcontract under NAICS code 484121, which classifies the activity as general freight trucking, and is managed by the Department of Defense through the Ok DLA Aviation office based in Oklahoma City. The opportunity was posted on July 23, 2026, with responses due by August 24, 2026, and performance is expected to occur at Tinker AFB, requiring the contractor to manage all aspects of movement, documentation, and regulatory compliance en route to the final destination.

General Freight Trucking, Long-Distance, Truckload

POSTED

DEADLINE

Compressor Module Packaging and Crating ServicesThe contract solicits specialized packaging, crating, and preservation services for compressor modules, with a focus on ensuring safe transport and long-term storage under demanding environmental conditions. The work requires robust protection against moisture, vibration, and other potential damage mechanisms, employing industry-leading techniques and materials to maintain the integrity and functionality of sensitive components throughout transit and extended storage periods. All activities must meet stringent military and defense standards for durability and reliability. This subcontract, posted on July 23, 2026, with a response deadline of August 24, 2026, falls under NAICS code 484220 for support activities for transportation and is managed by the Department of Defense through Ok DLA Aviation at Oklahoma City. The performance location is not specified in the provided details, but the services are critical to supporting defense logistics and equipment readiness. Potential bidders must be prepared to demonstrate technical capability in handling high-value, precision-engineered compressor modules and compliance with defense-related packaging protocols.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE