Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

This Pre-Solicitation opportunity from Department Of Defense was posted on June 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Project CL26071008, V Belt, Presolicitation SPE7LX26RX055

Closed
CL26071008Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 326299
New
Federal
USCG Base Miami Beach Replacement Fenders
Solicitation # 31020PR260000231
The United States Coast Guard Base Miami Beach Facilities Engineering division is soliciting quotations for a firm-fixed-price contract to procure three high-performance, foam-filled marine fenders. These fenders must have a nominal diameter of 5 feet and a length of 8 feet, featuring a 100 percent closed-cell foam core and a minimum 1.0 inch reinforced elastomeric polyurethane skin in non-marking marine black. A critical requirement is that all internal tension components, swivel end fittings, and bow or anchor shackles be constructed exclusively from Type 316 stainless steel to withstand harsh saltwater environments. The procurement includes the delivery of the fenders, technical data submittals, and logistics, with all items delivered FOB Destination to Base Miami Beach. The solicitation is a 100 percent total small business set-aside under NAICS code 326299. Award will be based on the best value, defined as the lowest evaluated price among technically acceptable offerors. Technical acceptability is contingent upon meeting specific performance ratings, including a minimum energy absorption of 136 ft-kip and a maximum reaction force of 101 kip. Additionally, the manufacturer must maintain an active ISO 9001 certification and provide certified mill test reports for all stainless steel hardware. Fabrication cannot begin until the Contracting Officer Representative provides written approval of all technical submittals, which are due within 15 calendar days of the award.
Base MIAMI(00028)

POSTED

about 22 hours ago

DEADLINE

in 6 days

AI Contract Overview

Show more

The procurement is for V Belts identified by National Stock Number 3030-01-488-5606 under Federal Supply Class 3030, with an estimated annual demand of 4,627 units, each to be delivered on a unit basis. The contract is structured as an indefinite quantity contract with a potential extension of up to four additional years, for a maximum total duration of five years encompassing base and option periods. The solicitation, numbered CL26071008, will be posted on DLA’s Internet Bid Site on or about July 17, 2026, with offers due by July 18, 2026, and is open to all responsible sources without any set-aside. The item is classified as a commercial item, including commercial of a type, and technical specifications including drawings NR 19207 12469149 Revision D and NR 19027 12469149-3 Revision D are available via cFolders under MR014885606 and on DIBBS. Delivery must occur 139 days after order placement, with performance required at Columbus, Ohio. The small business size standard is defined as 650 or fewer employees under NAICS 326299, and offerors must certify their entity type as either manufacturer or distributor/dealer, with distributors required to disclose manufacturer details and small business status. Inspection is to be conducted at origin, with sampling governed by MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based plan. Attributes are classified as critical (AQL 0.1), major (AQL 1.0), or minor (AQL 4.0), and rejection of non-conforming lots requires zero non-conformances. Packaging and marking must comply with MIL-STD-130N paragraph 4.1.b(2), with commercial item markings permitted as an option. The use of Class I ozone-depleting chemicals is strictly prohibited. Evaluation for award considers a combination of price, past performance, delivery schedule, and surge support capability, with no individual weights assigned. Contract administration includes requirements for configuration change management, removal of government identification from rejected items, and potential applicability of covered defense information per RD003. Certified cost or pricing data

General Info

DLA seeks suppliers for V Belt NSN 3030014885606, submissions due May 18, 2026.

Agency

Department Of Defense → DLA Land And MaritimeView Agency

NAICS

326299 - All Other Rubber Product ManufacturingView NAICS

Place of Performance

Columbus, OH, 43213, USA

Set-Aside

NONE

Documents

(3)

CL26071008+MR+LTC+Spreadsheet+NSN+info.xlsx

XLSX

CL26071008+MR+LTC+Question.docx

DOCX

CL26071008+PID-PACK.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Sources Sought

Type Changed

Sources Sought → Presolicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Land And Maritime
Contacts1 person available
OfficeCOLUMBUS, OH, 43218-3990, USA
Organization / Agency
Department Of Defense → DLA Land And Maritime
View Agency Profile
Office AddressCOLUMBUS, OH, 43218-3990, USA
Contacts

Full Description

Show more

National Stock Number (NSN) & Item Description: 3030-01-488-5606, V Belt


Quantity Estimates (Yearly): 4,627 Units


Unit of Issue: Each


Delivery Schedule: 139 days after delivery of order (ADO)



All responsible sources may submit an offer/quote which shall be considered.



The solicitation will be available on DLA’s Internet Bid Site (https://www.dibbs.bsm.dla.mil/RFP/) on its issue date on or about July 17, 2026



The Small Business size standard is 650 or less employees for NAICS 326299.



 NSN 3030-01-488-5606 has AMC/AMSC of 1/G. Drawings/specifications are currently available through the cFolders under ‘MR014885606’ and through the DIBBS solicitation link on the solicitation issue date.



The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government. The total duration (base plus option years) shall not exceed 5 years.  



This proposed procurement includes items within the Federal Supply Class 3030.



While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, past performance, delivery, and surge support as evaluation factors described in the solicitation. 



This proposed procurement contains items with inspection at Origin. 

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS