This Government Contract opportunity from Department Of Defense was posted on November 25, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Project Labor Agreement Survey - Construction Of The Ground Based Strategic Deterrent (GBSD) Sentinel Consolidated Vehicle Maintenance Complex (CVMC), Minot AFB, ND

Closed

W9128F26SM005Federal

Submission Closed12/30/2025, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 236220

New

SLED

Renovate Inpatient Pharmacy Phase II Loma Linda

Solicitation # 870532

The Design Build contractor is responsible for the complete design and construction renovation of approximately 10,000 square feet on the first floor of Building 1 at the Loma Linda VA Health Care System Hospital. The project encompasses the modernization of the Inpatient Pharmacy, locker rooms, and selective corridors, requiring comprehensive updates to mechanical, electrical, plumbing, fire sprinkler, and fire alarm systems. A critical component of the scope is the management and execution of lead and asbestos abatement across all affected areas prior to demolition and new construction. The pharmacy renovation specifically requires the creation of sterile and non-sterile hazardous drug compounding rooms that strictly adhere to USP 797, USP 800, and VA PG-18-12 standards. Additionally, the locker room updates include full replacement of finishes and fixtures, while the corridor work focuses on ceiling height adjustments, new LED lighting, and seamless HVAC integration. This solicitation, numbered 870532, was posted on October 15, 2026, with a response deadline of October 23, 2026.

Bristol Alliance of Companies

POSTED

DEADLINE

Construction of the Recharge Master Plan Update Basin Improvements Project Montclair Basin Improvements

Solicitation # construction-recharge-master-plan-update-basin-improvements-project-montclair-basin-improvements-2

The Construction of the Recharge Master Plan Update Basin Improvements Project Montclair Basin Improvements is a solicitation issued by RT Contractor Corp for a project under the Inland Empire Utilities Agency in California. This opportunity, categorized under NAICS code 236220, specifically calls for bids from Disadvantaged Business Enterprise (DBE) subcontractors. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026. The project area for subcontracting opportunities is identified as Riverside or Los Angeles. Compliance with strict Disadvantaged Business Enterprise requirements is mandatory to secure project financing, and failure to meet these standards will result in a bid being deemed non-responsive. Bidders must demonstrate Good Faith Efforts (GFE), including proof of posting solicitations in an online publication for 30 consecutive calendar days and in a print newspaper for at least one day prior to the bid opening. Additionally, bidders must provide proof of utilizing the Small Business Administration and the Minority Business Development Agency within their bid package. While outreach documentation may be submitted up to three business days after the bid closing, the publicity and agency assistance proofs must be included at the time of submission.

POSTED

DEADLINE

Cape Cod Space Force Microgrid Power Station - Bourne, MA

Solicitation # cape-cod-space-force-microgrid-power-station-bourne-ma

J&J Contractors, Inc. is soliciting bids for the Cape Cod Space Force Microgrid Power Station project located in Bourne, Massachusetts. This comprehensive construction effort encompasses a wide range of trades, including masonry, structural steel, miscellaneous metals, metal paneling and siding, roofing, drywall, flooring, painting, fire protection, plumbing, mechanical, electrical, and sitework. The project is designated as an SBA set-aside, making it available to various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned businesses. Interested parties must adhere to Davis Bacon Wage Rates, and the project is exempt from sales tax. The response deadline for this solicitation is October 30, 2026. To receive a formal bid invitation through Building Connected, applicants should contact Rahul Maheshwari directly via email.

J&J CONTRACTORS, INC.

POSTED

DEADLINE

Solicitation # weapons-magazine

The Weapons Magazine solicitation, issued by Sauer Construction, focuses on comprehensive site development and foundational infrastructure in Virginia. The scope of work encompasses critical electrical and structural elements, including primary and secondary electrical systems, grounding, lighting protection, and the construction of access roads. Additionally, the project requires specialized geotechnical and civil work involving piling foundations, rigid inclusions, and general site work. This opportunity is designated as a small business set-aside, welcoming bids from various certified entities including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned Small Businesses. Interested parties must submit their responses by November 15, 2026. The project falls under NAICS code 236220, and inquiries should be directed to the primary point of contact, David Phillips.

POSTED

DEADLINE

AMC-0194 GPT ATCT Public Announcement

Solicitation # amc-0194-gpt-atct-public-announcement

This solicitation, issued by PTSI Managed Services Inc. (Parsons) for work in Mississippi, covers a wide range of facility improvements and repairs. The scope of work includes electrical corrections such as grounding and SPDS replacement, mechanical repairs involving copper piping and chilled water systems, and civil reinforcements including gate and foundation repairs. Additionally, the project requires structural repairs like epoxy injection and painting, as well as architectural upgrades including floor tile replacement, window sealing, and gutter installation. The estimated magnitude of construction for this project is between 500,000 and 1,000,000 dollars. This opportunity is set aside for small businesses, including SDB, WOSB, HUBZone, and VOSB certifications. Interested parties must respond by November 18, 2026, under NAICS code 236220.

PTSI Managed Services Inc. (Parsons)

POSTED

DEADLINE

P084 NEXT GENERATION TORPEDO INTEGRATION LAB & P1016 Consolidated RDT&E Systems Facility – Newport, RI

Solicitation # p084-next-generation-torpedo-integration-lab-p1016-consolidated-rdte-systems-facility-newport-ri

J&J Contractors, Inc. is soliciting bids for the construction of the Next Generation Torpedo Integration Lab and the P1016 Consolidated RDT&E Systems Facility in Newport, Rhode Island. The primary project involves a 12,920 square foot multi-story steel frame laboratory and office facility featuring a shallow foundation, metal standing seam roof, and masonry and metal panel exterior walls. This scope encompasses comprehensive site preparations, including landscaping, parking, exterior lighting, telecommunications, and the installation of underground stormwater retention and utility systems. An additional option for the P1016 facility includes a 17,978 square foot laboratory with similar structural specifications and the demolition of an existing 548 square meter engineering facility. The solicitation is open to various small business designations, including SDB, WOSB, HUBZone, and VOSB. Bidders must adhere to Davis Bacon Wage Rates, and the project is exempt from sales tax. Pricing is requested across a wide array of trades, including demolition, abatement, structural steel, mechanical, electrical, plumbing, and fire protection, among others. Interested parties must contact the primary point of contact to receive the formal bid invitation and documents via Building Connected before the response deadline of November 30, 2026.

J&J CONTRACTORS, INC.

POSTED

DEADLINE

CITY OF GREENFIELD WASTEWATER TREATMENT PLANT UPGRADE PROJECT

Solicitation # city-greenfield-wastewater-treatment-plant-upgrade-project

The City of Greenfield Wastewater Treatment Plant Upgrade Project involves the construction of an upgraded 2.0 million gallons per day wastewater treatment plant located at 41901 Walnut Avenue in Greenfield, California. The project, managed by C. Overaa & Co., has a total duration of 915 calendar days and is divided into four distinct phases: site preparation including soil stabilization and facility relocation; construction of a packaged Membrane Bioreactor treatment plant, headworks, UV disinfection, and SCADA systems; decommissioning and demolition of existing facilities; and the completion of finish facilities including the Walnut Avenue extension for water and sewer services. A critical requirement of the project is maintaining the existing plant in service during the first two phases while ensuring compliance with General Order/NOA standards. This solicitation is open to small businesses, including certified veteran, women, and disadvantaged business enterprises, with a specific local hiring goal requiring 50 percent of the construction workforce to be residents of Monterey, San Benito, or Santa Cruz counties. Subcontractors must utilize the Textura electronic invoicing system and are responsible for associated service fees. Bids are due by November 10, 2026, following a mandatory pre-bid meeting held on October 5, 2026. Award acceptance is conditioned upon the subcontractor's full agreement to Overaa standard terms, including potential 100 percent performance and labor bonds and specific workers compensation insurance waiver of subrogation endorsements.

POSTED

DEADLINE

ILLINOIS STATE UNIVERSITY SOUTH CAMPUS HOUSING & DINING

Solicitation # illinois-state-university-south-campus-housing-dining

This solicitation is for the Illinois State University South Campus Housing and Dining project, managed by River City Construction, LLC. The project falls under NAICS code 236220 and will be performed in the state of Illinois. Interested parties must submit their responses by the deadline of October 29, 2026, at 2:00 PM. The opportunity is specifically set aside for small businesses, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. For further information or inquiries, the primary point of contact is Justin Beaty, who can be reached via email at bid@rccllc.com or by phone at 309-694-3120.

River City Construction, LLC

POSTED

DEADLINE

Solicitation # sof-armory

Sauer Construction is seeking bids from all construction trades for the SOF Armory project located in North Carolina. This solicitation is specifically set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by the deadline of November 30, 2026. The primary point of contact for this opportunity is Adam Houck, and the project falls under NAICS code 236220.

POSTED

DEADLINE

P1102 Weapons Magazine and Ordnance Operations Facility, Naval Submarine Base New London, Groton, Connecticut

Solicitation # p1102-weapons-magazine-ordnance-operations-facility-naval-submarine-base-new-london-groton

J & J Contractors, Inc. is soliciting bids for the P1102 Weapons Magazine and Ordnance Operations Facility project at the Naval Submarine Base New London in Groton, Connecticut. This comprehensive construction project has a duration of 1828 calendar days and involves the creation of six Containerized Long Weapons Storage units, two Box G magazines, and one Box H earth-covered high-explosive magazine. The scope includes the construction of an Ordnance Operations building, a Truck Inspection facility, and a Sentry building, alongside the demolition of 18 existing magazines and two other buildings. Technical requirements encompass a wide range of trades, including demolition, abatement, structural steel, electrical, plumbing, and mechanical work. Key site features include rigid inclusions, load transfer mats, grounding and lightning protection, intrusion detection systems, and extensive site preparation involving rock excavation and wetland mitigation. The project also requires the installation of primary and secondary electrical distribution, telecommunications infrastructure, access roads, and landscaping. This opportunity is set aside for various small business categories, and interested parties must contact Rahul Maheshwari to receive bid documents before the October 31, 2026 deadline.

J & J Contractors, Inc

POSTED

DEADLINE

Colville Fuels, Coyote Ridge Golf Course, Secondary Emergency Exit from Clubhouse Basement

Solicitation # Request-for-Bid-Coyote-Ridge-Golf-Course-Secondary-Emergency-Exit-from-Clubhouse-Basement.pdf

Colville Fuels LLC is soliciting bids for the construction of a code-compliant secondary emergency exit from the clubhouse basement at Coyote Ridge Golf Course in Washington. The scope of work includes saw cutting reinforced concrete walls, installing a commercial-grade exterior door assembly with panic hardware, and excavating a permanent ADA-accessible egress path with required drainage, retaining walls, and handrails. The contractor must ensure all work is code-compliant, coordinate inspections with the Authority Having Jurisdiction, and restore all affected surfaces to match existing clubhouse architecture. This is a price-based invitation for bids where the award will be granted to the lowest responsive and qualified bidder, subject to budgetary limits and Indian preference requirements. Preference is tiered from 100% Colville Business Enterprises down to non-certified Indian-owned businesses, with allowable price differentials based on the total bid amount. Bidders must submit a firm fixed price bid, a performance schedule, a subcontracting plan, and evidence of financial stability, insurance, and licensing by November 20, 2026. The project is expected to be completed by March 31, 2026, though this date is weather-dependent. Final contract terms and payment conditions will be negotiated upon the selection of the successful bidder.

Confederated Tribes of the Colville Reservation

POSTED

DEADLINE

Hotel & Commercial General ContractingThis subcontracting opportunity involves general contracting for hotel and commercial construction projects within the City of Santa Fe, Texas. The scope of work focuses on constructing retail shells and full-service buildings for prime contractors, specifically targeting nationally recognized hotel brands such as Marriott, Hilton, and IHG, as well as table-service restaurants. The objective is to deliver completed structures that are fully ready for certificates of occupancy. The solicitation is categorized under NAICS code 236220. Interested parties must note that the response deadline is November 19, 2026, following a posting date of October 20, 2026. This project represents a specialized construction effort to expand the commercial and hospitality infrastructure of the region.

City of Santa Fe

POSTED

about 7 hours ago

DEADLINE

in about 1 month

General Info

Agency

Department Of Defense → W071 Endist Omaha

NAICS

236220 - Commercial and Institutional Building Construction

Place of Performance

FE Warren AFB, WY, USA

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedNov 25

special-notice

Response DeadlineDec 30

Deadline has passed

Submission Closed

12/30/2025, 08:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W071 Endist Omaha

Contacts2 people available

OfficeOMAHA, NE, 68102-4901, USA

Organization / AgencyDepartment Of Defense → W071 Endist Omaha

Office AddressOMAHA, NE, 68102-4901, USA

Contacts

Ariel Vogan

contact@example.gov

John Solomon

contact@example.gov

Full Description

The U.S. Army Corps of Engineers Omaha District is soliciting comments from the construction community addressing the potential use of Project Labor Agreements (PLA) for a large-scale construction project with a construction magnitude between $100M and $250M in support of the Construction Of The Ground Based Strategic Deterrent (GBSD) Sentinel Consolidated Vehicle Maintenance Complex (CVMC), Minot AFB, ND.

Email your responses no later than 2:00 PM central time on 30 December 2025 to ariel.e.vogan@usace.army.mil and courtesy copy john.s.solomon@usace.army.mil. Ensure your response is limited to 5 pages and the Subject Line of your response includes “PLA Survey – GBSD CVMC, Minot AFB, ND”. Please provide your contact information in the body of the email.

A PLA is defined as a pre-hire collective bargaining agreement between a Prime contractor and one or more labor organizations that establishes the terms and conditions of employment for a specific construction project and is an agreement described in 29 U.S. C. 158(f).

Federal Acquisition Regulation (FAR 22.503) Policy provides that:

(a) Executive Order (E.O.) 14063, Use of Project Labor Agreements for Federal Construction Projects, requires agencies to use project labor agreements in large-scale construction projects to promote economy and efficiency in the administration and completion of Federal construction projects.

(b) When awarding a contract in connection with a large-scale construction project (see 22.502), agencies shall require use of project labor agreements for contractors and subcontractors engaged in construction on the project, unless an exception at 22.504(d) applies.

(c) An agency may require the use of a project labor agreement on projects where the total cost to the Federal Government is less than that for a large-scale construction project, if appropriate.

(1) An agency may, if appropriate, require that every contractor and subcontractor engaged in construction on the project agree, for that project, to negotiate or become a party to a project labor agreement with one or more labor organizations if the agency decides that the use of project labor agreements will—

(i) Advance the Federal Government’s interest in achieving economy and efficiency in Federal procurement, producing labor-management stability, and ensuring compliance with laws and regulations governing safety and health, equal employment opportunity, labor and employment standards, and other matters; and

(ii) Be consistent with law.

(2) Agencies may consider the following factors in deciding whether the use of a project labor agreement is appropriate for a construction project where the total cost to the Federal Government is less than that for a large-scale construction project:

(i) The project will require multiple construction contractors and/or subcontractors employing workers in multiple crafts or trades.

(ii) There is a shortage of skilled labor in the region in which the construction project will be sited.

(iii) Completion of the project will require an extended period of time.

(iv) Project labor agreements have been used on comparable projects undertaken by Federal, State, municipal, or private entities in the geographic area of the project.

(v) A project labor agreement will promote the agency’s long term program interests, such as facilitating the training of a skilled workforce to meet the agency’s future construction needs.

(vi) Any other factors that the agency decides are appropriate

Please incorporate responses to the following questions within your submission:

1) Do you have knowledge that a PLA has been used in the local area on projects of this kind? If so, please provide supporting documentation.

2) Are you aware of skilled labor shortages in the area for those crafts that will be needed to complete the referenced project? If so, please elaborate and provide supporting documentation where possible.

3) Are you aware of time sensitive issues/scheduling requirements that would affect the rate at which the referenced project should be completed? If so, please elaborate and provide supporting documentation where possible.

4) Identify specific reasons why or how you believe a PLA would advance the Federal Governments interest in achieving economy and efficiency in Federal procurement.

5) Identify specific reasons why you do not believe a PLA would advance the Federal Governments interest in achieving economy and efficiency in Federal procurement.

6) Identify any additional information you believe should be considered on the use of a PLA on the referenced project.

7) Identify any additional information you believe should be considered on the non-use of a PLA on the referenced project.

8) Will the inclusion of the PLA requirement affect industry proposal submission timeliness? Please provide anticipated time required to draft and include a PLA with a proposal package.

9) How would a PLA on this project impact small business participation? Include any relevant information regarding small business prime and/or subcontractors who may or may not be non-signatory to a PLA concurrently working a separate contract on the same project site.

10) How would a PLA impact costs, schedule, and overall execution of the contract?

The information gathered in this survey should include the following information on projects completed in the last five (5) years:

1. Project Name and Location

2. Detailed Project Description

3. Initial Cost Estimate vs. Actual Final Cost

4. Was the project completed on time?

5. Number of craft trades present on the project

6. Was a PLA used?

7. Were there any challenges experienced during the project?

PROJECT DESCRIPTION:

CONSTRUCTION OF THE GROUND BASED STRATEGIC DETERRENT (GBSD) SENTINEL CONSOLIDATED VEHICLE MAINTENANCE COMPLEX (CVMC), MINOT AFB, ND.

The upcoming solicitation will be executed using a design-bid-build (DBB) project delivery method, which will require the contractor to provide the Government with a complete facility and warranty based on the Request for Proposal (RFP).

Construction will consist of two slab-on-grade buildings at Minot AFB, ND. The first is identified as the Vehicle Maintenance Facility, a primarily be one story facility with a second-floor mechanical mezzanine with an approximate square footage of 88,000 SF. The second is identified as the Vehicle Operations Facility, a single story facility with an approximate square footage of 28,000 SF.

The new facilities will include electrical; water; sewer; heating, ventilation, and air conditioning (HVAC); site work and site paving; fencing; landscaping; communications; and other utility expansions as required to serve a complete and usable facility.

Spaces within the buildings include vehicular work bays supporting a variety of different vehicle types, supporting service rooms, parts spaces and distribution spaces, and administration office areas, including general circulation, mechanical/electrical/communications rooms and mezzanine storage.

Construction will also consist of utilities, demolition of an existing building (B425), substantial pavement for parking and circulation, and additional site improvements. Phasing of building construction and building demolition will be required.

This facility will be designed as permanent construction in accordance with Department of Defense (DoD) UFC 1-200-01. This project will comply with DoD antiterrorism/force protection requirements per UFC 4-010-01.

This project is anticipated to be subject to Cybersecurity Maturity Model Certification (CMMC), Level 2 pursuant to DFARS Clause 252.204-7021 Contractor Compliance with the Cybersecurity Maturity Model Certification Level Requirement. Firms will need to ensure they are properly certified. Failure to meet the CMMC, Level 2 will make an offer ineligible for award.