This Government Contract opportunity from Department Of Homeland Security was posted on July 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Propane Piping System Inspection & Non-Destructive Testing (NDT)

Closed

Federal

Submission Closed08/28/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

DIBBS

First Article Test (FAT) SpecialistThis subcontract, managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires a First Article Test Specialist to perform validation on wiring harness components for prime contractors. The scope of work involves conducting First Article Testing on one unit, specifically NSN 0001S0000053, utilizing electrical signal integrity equipment to ensure design and manufacturing quality meet strict government standards. The selected provider is responsible for delivering a comprehensive FAT Report and one validated test unit for government approval. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 30, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Third-Party Dimensional Inspection and CertificationThis subcontract for Third-Party Dimensional Inspection and Certification supports the DLA Weapons Support Aviation Supply Chain by providing independent quality assurance and dimensional verification for prime contractors. The scope of work focuses on verifying Class 3A and 3B threads in accordance with System 22 of FED-STD-H28/20, utilizing sampling plans based on MIL-STD-1916 or ASQ H1331. The selected provider must operate out of an ISO 9001 or SAE AS9003 certified facility and possess the necessary precision gauging tools to deliver detailed inspection reports and certifications of conformance. The project is categorized under NAICS code 541380 and will be performed in Cherry Point. Interested parties should note the response deadline of October 30, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Specialized Materials Testing Laboratory (Production Lot Test)This subcontract opportunity is for a Specialized Materials Testing Laboratory to perform Production Lot Testing for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected provider will execute tests according to procurement note E04 to verify the performance standards and material properties of torpedo components, with a specific focus on chemical testing for Otto Fuel compatibility. All work will be performed in Bremerton, Washington, and requires the delivery of formal test reports and certifications of compliance. To be eligible, contractors must hold SAE AS9003 or ISO 9001 certifications and may require JCP certification to access necessary technical data. This requirement falls under NAICS code 541380. Interested parties must submit their responses by November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Aviation Component Quality Inspection & CertificationThe Aviation Component Quality Inspection and Certification subcontract involves providing independent quality assurance and non-conformance testing for prime contractors supporting the DLA Weapons Support ASC. The selected provider will perform rigorous inspections using calibrated micrometers and CMM equipment in accordance with MIL-STD-1916 or ASQ H1331 to ensure zero-nonconformance. Additionally, the contractor is responsible for validating that all marking and packaging meet MIL-STD-129 and MIL-STD-2073-1E standards, ultimately delivering detailed quality inspection reports and certifications of conformance. To be eligible, contractors must hold AS9100 or ISO 9001 certifications and maintain CMMC Level 2 compliance. This opportunity is issued by the Department of Defense under NAICS code 541380. Interested parties must submit their responses by October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Thermal Cycling and Environmental Validation TestingThis subcontract for Thermal Cycling and Environmental Validation Testing involves performing environmental stress testing for prime contractors on DLA supply contracts. The scope of work requires validating the performance of observation windows across a temperature range of -55°C to 65°C, executing at least 100 cycles over a two-hour period using environmental test chambers. The testing must verify structural integrity and clarity in accordance with Navy drawing 1582AS124, culminating in the delivery of certified test reports for 18 units. The project is managed under the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. Due to the nature of the technical data handling involved, the contractor must maintain CMMC Level 2 certification. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 2, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test services is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected contractor will perform Production Lot Testing for prime contractors on DLA supply contracts to verify the dimensions and material properties of machine thread bushings. All testing must be executed using specialized metrology and testing equipment in strict accordance with government standards, culminating in the delivery of a certified Production Lot Test report. The performance of this contract will take place in New Cumberland, Pennsylvania. Key compliance requirements include maintaining CMMC Level 2 certification and coordinating directly with government inspectors for destination acceptance. Interested parties should note the response deadline of October 30, 2026, for this opportunity categorized under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing for RF Cable AssembliesThis subcontract involves providing specialized testing and validation services for RF cable assemblies to support prime contractors on DLA supply contracts. The selected provider will execute First Article Test protocols to ensure electrical and physical characteristics align with the NSN technical data package, utilizing RF signal analyzers and network analyzers. The final deliverables for this engagement include a validated sample and a comprehensive First Article Test Report. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division and will be performed in New Cumberland. To be eligible, contractors must maintain ISO 9001:2015 certification and have completed a CMMC Level 2 self-assessment. Responses for this opportunity are due by October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Testing and Quality ValidationThis subcontract for First Article Testing and Quality Validation supports the DLA Weapons Support Land Supply Chain by providing initial validation and quality testing for prime contractors. The selected provider is responsible for producing two units for government testing at Robins Air Force Base in Georgia and generating detailed inspection reports for 402 MXSG/MXRILL. The project requires the use of precision measurement and test equipment RT001 and strict adherence to FAR 52.209-4 compliance standards. The final deliverables include the two test units and formal Factory Acceptance Test approval documentation. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must note the response deadline of November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

First Article Test (FAT) and Certification ServicesThis subcontract involves providing specialized testing and certification services for the DLA Weapons Support Active Devices Division. The primary objective is to conduct First Article Testing on a single prototype unit to ensure full compliance with MIL-DTL-24231/2E standards. The selected provider must utilize precision measurement and testing equipment and perform quality assurance inspections following either ASQ H1331 or MIL-STD-1916 sampling methods. The project deliverables include the return of the tested First Article Testing unit and a comprehensive First Article Test Report. Performance will take place in Tracy, California, under NAICS code 541380. Interested parties must respond by November 2, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Valve Hydrostatic Testing and Quality ValidationThis subcontract, titled Valve Hydrostatic Testing and Quality Validation, involves performing pressure and leak testing for prime contractors on Defense Logistics Agency supply contracts. The scope of work requires conducting hydrostatic testing on four 12-inch gate valves using calibrated equipment to ensure full compliance with drawing specifications. Quality validation must be performed according to MIL-STD-1916 or ASQ H1331 sampling plans, with the final delivery consisting of signed hydrostatic test reports for each individual unit. The project is a total small business set-aside under NAICS code 541380 and will be performed in Norfolk, Virginia. Interested parties must respond by November 2, 2026. This effort is managed by the Department of Defense through the Defense Logistics Agency.

Defense Logistics Agency

POSTED

DEADLINE

First Article Testing (FAT) and Quality InspectionThis subcontract opportunity is for the Department of Defense, specifically the DLA Weapons Support ASC, to provide specialized testing and quality inspection services for aerospace projects. The selected contractor will perform non-destructive testing and dimensional verification for First Article Test units in accordance with MIL-STD-1916 or ASQ H1331 standards. Utilizing CMM and NDT equipment, the contractor is responsible for generating and delivering certified inspection reports for the 402 MXSG/MXRLIM lab. The project is a total small business set-aside under NAICS code 541380, with performance taking place at Robins Air Force Base. Due to the nature of the aerospace work, the contractor must maintain ITAR compliance and meet CMMC Level 2 security requirements. Interested parties must submit their responses by October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Critical Application Inspection and Certification ServicesThis subcontract for Critical Application Inspection and Certification Services supports the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider will perform independent inspection and quality validation for prime contractors on avionics projects, specifically focusing on ensuring zero non-conformance for critical application items. Work is performed in New Cumberland, Pennsylvania, under NAICS code 541380. The scope of work requires conducting sampling and inspections in accordance with MIL-STD-1916 or ASQ H1331. The contractor must verify strict compliance with TDP Rev B Gen 2 and QAP 13873 using calibrated precision test equipment. Final deliverables for these services include detailed inspection reports and Certificates of Conformance.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 11 hours ago

DEADLINE

in 8 days

AI Contract Overview

This subcontract opportunity with the Department of Homeland Security, managed by Tracen Petaluma, involves providing specialized inspection and non-destructive testing for propane piping systems in Petaluma, California. The scope of work requires performing external visual inspections, ultrasonic thickness measurements, and mechanical integrity evaluations to identify corrosion, wall thinning, and other structural deficiencies. All services must be executed in strict compliance with ASME, API 570, and NFPA 58/59 standards. The project is designated as a total small business set-aside under NAICS code 541380. Interested parties must submit their responses by the deadline of August 28, 2026. This contract ensures the safety and operational integrity of critical propane infrastructure through rigorous technical assessments.

General Info

Propane piping inspection and testing for DHS in Petaluma, CA, due August 28, 2026.

Agency

Department Of Homeland Security → Tracen PETALUMA(00049)

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Petaluma, CA, 94952, USA

Set-Aside

SBA

Documents

This scope was carved out of 70Z049-26-RFI-1.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RFI - INSPECTION, TESTING, & MECHANICAL INTEGRITY EVALUATION OF PROPANE PIPE SYSTEM AT USCG TRACEN PETALUMA, CA

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJul 14

subcontract

Response DeadlineAug 28

Deadline has passed

Submission Closed

08/28/2026, 03:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Homeland Security → Tracen PETALUMA(00049)

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Homeland Security → Tracen PETALUMA(00049)

Office AddressN/A

ContactsNo contact information available

Full Description

Perform external visual inspections, ultrasonic thickness measurements, and mechanical integrity evaluations on propane piping systems to detect corrosion, wall thinning, and structural issues in compliance with ASME, API 570, and NFPA 58/59.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS