Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

Protection Cover

Active
Z5384State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Nashville Electric Service is soliciting bids for the procurement of 96 feet of Wildlife Protection Cover Stinger. These covers must have an inner diameter of approximately 5/8 inches and feature an overlapping design that allows for installation without disconnecting the lead wire from the bushing. The equipment must be compatible for use with a hot stick or rubber protective gloves. Only specific approved manufacturers and part numbers are acceptable, specifically Salisbury 58-12SC or 3M-INDUS CCI-266-125, and alternate brands will not be accepted. The solicitation, identified as Z5384, was posted on October 15, 2026, with a response deadline of October 22, 2026, at 2:00 pm local time. Bids must be submitted through the Bid Center. Evaluation factors for the award include technical compliance with the specified part numbers and the earliest delivery time stated in calendar days. The primary point of contact for this procurement is Tiffany Caruthers.

General Info

Nashville Electric Service is soliciting bids for 96 feet of Wildlife Protection Covers.

Agency

Tennessee → Nashville Electric Service

NAICS

N/A

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

1

RFB Z5384 - Wildlife Protection Cover Stinger

PDF, High priority: read this firstrfb
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyTennessee → Nashville Electric Service
Contacts1 person available
OfficeNashville, TN, USA
Organization / AgencyTennessee → Nashville Electric Service
Office AddressNashville, TN, USA
Contacts
Tiffany CaruthersProcurement Contact
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FT WILDLIFE PROTECTIONCOVERSTINGER STINGER COVERS, FOR WILDLIFE PROTECTION. INNERDIAMETER TO BE APPROXIMATELY 5/8 INCHES. OVERLAPPING SO COVERCAN BE INSTALLED WITHOUT DISCONNECTING THE LEAD WIRE FROM THE BUSHING, FOR USE WITH RUBBER PROTECTIVEGLOVES OR A HOT STICK. SALISBUR 58-12SC 3M-INDUS CCI-266-125 Stateyour earliest delivery IN CALENDAR DAYS: _ DELIVERY MAY BE CONSIDEREDIN THE AWARDOF THIS BID. _ Alternate brands will not be accepted on this inquiry. To have your product evaluated for future consideration, contact the buyerlisted in this RFB. _ In the eventof a discrepancy between the ordering description and part number, it is the responsibility of the vendor to contact the buyerfor clarification before the published CLOSE DATE. _ Note: This bid must be submitted usingthe Bid Center and must be received by 2:00 pm localtime on the published CLOSE DATE. _

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

NAICS: 423610
New
SLED
Basler BE1-50/51B-214 Relay Retrofit Kit SupplierThis subcontract involves the procurement of three Basler BE1-50/51B-214 Relay Retrofit Kits to support prime contractors working on Nashville Electric Service power distribution projects. These specific kits are designed to replace General Electric Type IAC single-phase time overcurrent relays and must be supplied without a case to ensure they fit within existing GE housing. To be eligible for this contract, the supplier must be an approved manufacturer or an authorized Basler distributor. The project is based in Nashville, Tennessee, and falls under NAICS code 423610. Interested parties must submit their responses by October 22, 2026.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423830
New
SLED
Supply of 1000V Insulated Cabinet Straight Tip Screwdrivers
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332216
New
SLED
Round Point Shovel SupplierThis subcontract agreement with Nashville Electric Service requires the procurement and delivery of 60 heavy-duty round point shovels for use by prime contractors on various procurement projects in Nashville. The specified equipment must feature contractor strength fiberglass handles, steel reinforced collars, and open back tempered steel blades. To ensure quality standards, the supplier must provide units from approved brands such as Nupla, Hisco, Ames Jackson, Union Forge, or Seymour. Eligible bidders must hold status as an authorized manufacturer or distributor to qualify for the contract. The solicitation was posted on October 15, 2026, with a response deadline of October 22, 2026. The successful vendor will be responsible for the complete sourcing and delivery of all 60 units to the designated performance location.
Saw Blade and Handtool Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423840
New
SLED
3M Super Weatherstrip Adhesive SupplierThis subcontract agreement establishes the requirements for a supplier to provide automotive-grade adhesive for prime contractors working on Nashville Electric Service procurement projects. The selected vendor is responsible for sourcing and delivering six tubes of 3M-AUTO 08001 Super Weatherstrip Adhesive to Nashville. To ensure quality and compliance, the contract strictly mandates the use of authentic 3M-AUTO branded products, explicitly prohibiting the use of alternate brands. The procurement process is governed by NAICS code 423840, with a response deadline set for October 21, 2026. The successful supplier must adhere to the specified delivery timeframe to support ongoing project operations. Interested parties can find further details and submission guidelines through the Nashville Electric Service vendor portal.
Industrial Supplies Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 423610
New
SLED
S&C MICRO AT Transfer Control Switch Supplier
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 335311
New
SLED
15KV Indoor Bar Type Current TransformersThis subcontract involves the manufacture and supply of 600:5 15 KV Indoor Bar Type Current Transformers for prime contractors working on Nashville Electric Service procurement projects. The units must be manufactured to meet IEEE 0.15 metering accuracy standards from 1 percent nominal current through the rating factor. Each unit requires specific NES identification, to be applied via CNC machining on name plates or embossed aluminum strips. The scope of work requires the delivery of three fully tested and labeled transformers to Nashville, Tennessee. This opportunity is categorized under NAICS code 335311 and is associated with the Nashville Electric Service in Tennessee.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 423830
New
SLED
High-Speed Twist Drill SupplierThis subcontract agreement establishes a requirement for the supply and delivery of twelve high-speed twist drills to support prime contractors on Nashville Electric Service procurement projects. The specific technical requirements call for drills that are 5/8 inch in size with a 1/2 inch shank and jobbers length. To ensure quality and standardization, the supplier must provide part numbers from a restricted list of approved manufacturers, including Chicago, DeWitt, Precis, Morse, Clec, or Irwin, as alternate brands are strictly prohibited. The contract is managed by the Nashville Electric Service in Tennessee, with the place of performance located in Nashville. Interested parties must adhere to the procurement timeline, which includes a response deadline of October 22, 2026. The successful supplier is responsible for the complete delivery of all twelve units to the agency.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423610
New
SLED
Wildlife Protection Cover Stinger SupplierThis subcontract agreement is for the supply of specialized wildlife protection stinger covers to be used by prime contractors on Nashville Electric Service utility projects in Nashville. The contract requires the delivery of 96 feet of covers featuring an inner diameter of approximately 5/8 inches and an overlapping design that allows for installation without the need to disconnect lead wires from bushings. Approved materials are limited to Salisbury 58-12SC or 3M-INDUS CCI-266-125, and all supplies must be compatible with rubber protective gloves or hot sticks. The solicitation was posted on October 15, 2026, with a response deadline of October 22, 2026, falling under NAICS code 423610.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 6 days
View Details
New
SLED
Shovel
Solicitation # Z5379
Nashville Electric Service is soliciting bids under solicitation number Z5379 for the procurement of 60 round point shovels. The required specifications include an open back tempered steel blade measuring approximately 9 1/4 by 11 1/2 inches, a steel reinforced collar, and a contractor strength fiberglass handle. Only specific brands and part numbers are acceptable, including Union Forge 45-160, Ames Jackson SFGLR, and Hisco HIRP14L; alternate brands will not be accepted for this inquiry. Bids must be submitted through the Bid Center by 2:00 pm local time on the close date of October 22, 2026. Vendors are required to state their earliest delivery time in calendar days, as delivery speed may be a factor in the award decision. Shanna Faulk serves as the primary procurement contact for this solicitation. Any discrepancies between ordering descriptions and part numbers must be clarified with the buyer prior to the submission deadline.

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 335311
New
SLED
Current Transformer
Solicitation # Z5382
Nashville Electric Service is soliciting bids for the procurement of three 600:5 15 KV Indoor Bar Type Current Transformers. The equipment must meet IEEE metering accuracy of 0.15 from 1 percent nominal current through the rating factor. The specified approved source is Arteche CID-17-750969120 or an equal alternative. Vendors quoting an alternate brand must provide the brand name in the comments field and attach all relevant descriptive literature. Strict marking and labeling requirements apply, as the manufacturer must attach NES numbers provided at the time of the purchase order. These numbers must be either embossed on a 1/2 by 3-1/2 inch aluminum strip attached to the name plate or CNC machined on the name plate with 3/8 inch tall lettering, and must also be listed on the outside of the shipping container. Bids must be submitted via the Bid Center by 2:00 pm local time on October 21, 2026. Evaluation factors include technical compliance and the earliest delivery time stated in calendar days, which may be considered in the final award decision.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
New
SLED
Relay Kit
Solicitation # Z5385
Nashville Electric Service is soliciting bids under solicitation Z5385 for the procurement of three Basler BE1-50/51B-214 Relay Retrofit Kits. These kits are specifically designed as replacement relays without cases to fit inside existing General Electric Type IAC single phase time overcurrent relay cases. The agency has explicitly stated that alternate brands will not be accepted for this requirement. Bids must be submitted through the Bid Center by 2:00 pm local time on the closing date of October 22, 2026. A critical component of the evaluation is the delivery schedule, as vendors must state their earliest delivery in calendar days, and this timeframe may be a deciding factor in the award. For any clarifications regarding part numbers or descriptions, vendors should contact the procurement lead, Tiffany Caruthers, prior to the submission deadline.

POSTED

1 day ago

DEADLINE

in 6 days
View Details
New
SLED
Drill
Solicitation # Z5380
Nashville Electric Service is soliciting bids for the procurement of 12 high speed, jobbers length twist drills with a 5/8 inch size and 1/2 inch shank. This solicitation, identified as Z5380, requires strict adherence to approved manufacturers and part numbers, including Chicago-55440, DeWitt 1330-1 -5/8, and Precis R56 91440. Alternate brands are explicitly prohibited for this inquiry. Bids must be submitted through the Bid Center by 2:00 pm local time on October 22, 2026. A critical requirement for the proposal is that vendors must state their earliest delivery time in calendar days, as delivery speed may be a determining factor in the award decision. For any discrepancies between part numbers and descriptions, vendors must contact the procurement lead, Shanna Faulk, for clarification before the closing date.

POSTED

1 day ago

DEADLINE

in 6 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS