Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Wildlife Protection Cover Stinger Supplier

Active

State & Local

Response Deadline10/22/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract agreement is for the supply of specialized wildlife protection stinger covers to be used by prime contractors on Nashville Electric Service utility projects in Nashville. The contract requires the delivery of 96 feet of covers featuring an inner diameter of approximately 5/8 inches and an overlapping design that allows for installation without the need to disconnect lead wires from bushings. Approved materials are limited to Salisbury 58-12SC or 3M-INDUS CCI-266-125, and all supplies must be compatible with rubber protective gloves or hot sticks. The solicitation was posted on October 15, 2026, with a response deadline of October 22, 2026, falling under NAICS code 423610.

General Info

Agency

Tennessee → Nashville Electric Service

NAICS

423610 - Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

This scope was carved out of Z5384.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Protection Cover

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineOct 22

Submission deadline

Response Deadline

10/22/2026, 07:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTennessee → Nashville Electric Service

ContactsNo contacts available

OfficeN/A

Organization / AgencyTennessee → Nashville Electric Service

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized wildlife protection stinger covers for prime contractors on Nashville Electric Service (NES) utility projects. Provisions 96 feet of covers with an inner diameter of approximately 5/8 inches and an overlapping design for installation without disconnecting lead wires from bushings. Supplies must be Salisbury 58-12SC or 3M-INDUS CCI-266-125 and compatible with hot sticks or rubber protective gloves. Delivers approved covers.

Similar Contracts

Same NAICS industry code

Illumination Hardware and Component SupplyThe Illumination Hardware and Component Supply subcontract involves providing essential electrical materials for prime contractors working on Texas Department of Transportation illumination maintenance projects. The scope of work includes the provision of TxDOT-approved LED luminaires, lamps, drivers, electrical conduit, wiring, and junction boxes, with a strict requirement that all supplied materials adhere to TxDOT Material Specifications. The supplier is responsible for delivering these components directly to the designated project site or the prime contractor facility. This opportunity is categorized under NAICS code 423610 and is associated with the Texas Department of Transportation. Interested parties must submit their responses by the deadline of November 12, 2026, at 4:00 PM. Further details regarding the solicitation can be accessed through the TxSmartBuy portal.

Texas Department of Transportation

POSTED

about 15 hours ago

DEADLINE

Electronic Component SupplyThis subcontract involves the supply of military-grade electronic components and semiconductors for the Department of Defense, specifically supporting DLA Weapons Support Maritime Supply Chain projects. The provider is responsible for sourcing parts that strictly adhere to Drawing 19207 12422551-002 specifications, delivering them as either individual parts or complete component kits. To ensure quality and security, the contract mandates full traceability for all items and the provision of Certificates of Conformance to mitigate the risk of counterfeit parts. Additionally, all supplied materials must be mercury-free. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 423610.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

Specialized Electronic Component SupplyThis subcontract, titled Specialized Electronic Component Supply, involves the procurement of defense-grade electronic components, including semiconductors, capacitors, and connectors, for prime contractors supporting DLA supply contracts. The supplier is responsible for delivering individual parts or component kits to the assembly manufacturer, with a strict requirement for Certificates of Conformance to mitigate the risk of counterfeit parts. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, the contract requires full compliance with the Buy American Act and the Berry Amendment. Performance will take place at Hill AFB, and the solicitation is categorized under NAICS code 423610.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

Electrical Component Tie-Down Strap SupplierThis subcontract involves the procurement or manufacture of specialized electrical tie-down straps for prime contractors supporting DLA supply contracts. The required items must meet Panduit Corp part number PRT6EH-QO and NSN 5975013787721, with strict adherence to the Buy American Act. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, and packaging must comply with MIL-STD-129, RP001, or ASTM D3951 standards. The contract requires the delivery of 12 units FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Managed by the Department of Defense under the DLA Weapons Support ASC, the opportunity falls under NAICS code 423610. The response deadline for this requirement is October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

Supply of JAN2N6547 TransistorsThis subcontract involves the supply of 173 units of Transistor JAN2N6547, identified by NSN 5961010775440, to support prime contractors for the DLA Weapons Support Active Devices Division. The components must strictly adhere to QML and QSLD standards for FSC 5961, with lead finishes complying with J-STD-609 and marking requirements meeting MIL-STD-129. Delivery is required FOB Origin to the DLA Distribution DDSP facility located in New Cumberland, Pennsylvania. To be eligible, providers must hold QML/QSLD certification and maintain rigorous cybersecurity standards, specifically CMMC Level 2 and NIST SP 800-171 compliance. The opportunity falls under NAICS code 423610, with a response deadline set for October 26, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 19 hours ago

DEADLINE

Digital Microcircuit Supplier (NSN 5962012895929)This subcontract opportunity is for the supply of authentic, new digital microcircuits to support prime contractors under the DLA Weapons Support Active Devices Division. The required components are part numbers 351-8364-010 from Rockwell Collins or AD7510DISQ from Analog Devices. Suppliers must ensure full supply chain traceability and provide test reports using DLA Land and Maritime Form 918 in accordance with the DLA Master List of Technical and Quality Requirements. Eligible bidders must complete a CMMC Level 2 self-assessment to meet security standards. The contract requires the delivery of both the microcircuits and all associated traceability documentation. Performance will take place in Columbus, Ohio, with responses due by October 26, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 19 hours ago

DEADLINE

Supply of Rockwell Automation Circuit Card AssembliesThis subcontract, issued by the Department of Defense for the DLA Weapons Support Nuclear Reactor Program, requires the procurement of 32 genuine Rockwell Automation circuit card assemblies, specifically part number 1769-IF8 under NSN 5998-01-537-0016. The supplier must ensure all units are new, meet original equipment manufacturer specifications, and include a certification of conformance to mitigate the risk of counterfeit parts. The contract is designated as a total small business set-aside under NAICS code 423610 and mandates strict compliance with the Buy American Act and the Berry Amendment. Performance for this requirement is located in Tracy, California, with a response deadline set for October 26, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 19 hours ago

DEADLINE

Supply of Sensitive Switch (NSN 5930-01-585-7910)This subcontract involves the procurement of one Sensitive Switch, specifically Rockwell Automation part number 802T-BT, for prime contractors working on projects for the Department of Defense DLA Weapons Support Electrical Devices Division. The selected provider must ensure the component is authentic and fully compliant with the DLA Master List of Technical and Quality Requirements, as well as NAVSEA 5100-003D mercury-free standards. The contract requires strict adherence to the Buy American Act and the Berry Amendment. Performance will take place in FPO 96665, with the final deliverable being one completed and verified sensitive switch under NAICS code 423610. Responses to the solicitation are due by October 26, 2026.

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 19 hours ago

DEADLINE

Communication Patching Panel SupplierThis subcontract involves the supply of communication patching panels for prime contractors working on DLA Weapons Support ASC procurement projects. The supplier is responsible for sourcing and providing part number SDCC2488/25S-01 manufactured by FCT Technologies, Inc. All items must be packaged according to ASTM D3951 and MIL-STD-129 standards and palletized per RP001. The contract requires strict compliance with the Buy American Act and DFARS telecommunications restrictions. The scope of work includes the delivery of three packaged and palletized panels FOB Origin to DLA Distribution in New Cumberland, Pennsylvania. This procurement falls under NAICS code 423610 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

Supply of Streamlight Inc Flashlights (NSN 6230015711331)This subcontract involves the procurement and supply of 800 Streamlight Inc Part #14032 flashlights, identified by NSN 6230015711331, for the Department of Defense. The items must be delivered to DLA Distribution San Joaquin in Tracy, California. All units are required to be packaged according to ASTM D3951 and marked in compliance with MIL-STD-129 and DLA RP001 standards. The contract is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 423610. Adherence to the Buy American Act is mandatory for this requirement. Interested parties must respond by October 26, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE8E7-27-T-0204

Solicitation SPE8E7-27-T-0204 is a fixed-price contract issued by the Defense Logistics Agency Distribution San Joaquin for the procurement of 800 flashlights, identified by NSN 6230015711331 and Streamlight Inc part number 14032. This is a Service-Disabled Veteran-Owned Small Business set-aside, requiring SBA certification for eligibility. The required delivery date is January 10, 2027, with a need ship date of December 23, 2026. Delivery is established as FOB Origin, with both inspection and acceptance occurring at the destination in Tracy, California. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 and DLA packaging requirements RP001. Non-hazardous materials must follow ASTM D3951, while hazardous materials require packaging per TQ requirement IP025 and labeling according to the Hazard Communication Standard. Technical and quality requirements are governed by the DLA Master List, which takes precedence over ASTM standards. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various DFARS and FAR clauses regarding cybersecurity, domestic sourcing under the Buy American Act, and the safeguarding of covered defense information.

DLA DIST SAN JOAQUIN

POSTED

about 19 hours ago

DEADLINE

Supply of Marathon Power Miniature UPS KitsThis subcontract through the Department of Transportation involves the supply of 600 Marathon Power Miniature Uninterruptible Power Supply kits annually for prime contractors working on FAA National Airspace System projects. The required hardware, part number UP-SDRU-0500-H1-KIT, consists of single-phase, capacitor-based, 800VA offline units specifically rated for dusty environments and temperatures exceeding 110 degrees, complete with NEMA 5-15 input plugs and external power strips. Eligible bidders must be an original equipment manufacturer or an authorized distributor. The performance of this contract is centered in Oklahoma City, and responses are due by November 4, 2026.

6973GH Franchise Acquisition Svcs

POSTED

DEADLINE

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

Basler BE1-50/51B-214 Relay Retrofit Kit SupplierThis subcontract involves the procurement of three Basler BE1-50/51B-214 Relay Retrofit Kits to support prime contractors working on Nashville Electric Service power distribution projects. These specific kits are designed to replace General Electric Type IAC single-phase time overcurrent relays and must be supplied without a case to ensure they fit within existing GE housing. To be eligible for this contract, the supplier must be an approved manufacturer or an authorized Basler distributor. The project is based in Nashville, Tennessee, and falls under NAICS code 423610. Interested parties must submit their responses by October 22, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Supply of 1000V Insulated Cabinet Straight Tip Screwdrivers

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Round Point Shovel SupplierThis subcontract agreement with Nashville Electric Service requires the procurement and delivery of 60 heavy-duty round point shovels for use by prime contractors on various procurement projects in Nashville. The specified equipment must feature contractor strength fiberglass handles, steel reinforced collars, and open back tempered steel blades. To ensure quality standards, the supplier must provide units from approved brands such as Nupla, Hisco, Ames Jackson, Union Forge, or Seymour. Eligible bidders must hold status as an authorized manufacturer or distributor to qualify for the contract. The solicitation was posted on October 15, 2026, with a response deadline of October 22, 2026. The successful vendor will be responsible for the complete sourcing and delivery of all 60 units to the designated performance location.

Saw Blade and Handtool Manufacturing

POSTED

DEADLINE

3M Super Weatherstrip Adhesive SupplierThis subcontract agreement establishes the requirements for a supplier to provide automotive-grade adhesive for prime contractors working on Nashville Electric Service procurement projects. The selected vendor is responsible for sourcing and delivering six tubes of 3M-AUTO 08001 Super Weatherstrip Adhesive to Nashville. To ensure quality and compliance, the contract strictly mandates the use of authentic 3M-AUTO branded products, explicitly prohibiting the use of alternate brands. The procurement process is governed by NAICS code 423840, with a response deadline set for October 21, 2026. The successful supplier must adhere to the specified delivery timeframe to support ongoing project operations. Interested parties can find further details and submission guidelines through the Nashville Electric Service vendor portal.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

S&C MICRO AT Transfer Control Switch Supplier

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

15KV Indoor Bar Type Current TransformersThis subcontract involves the manufacture and supply of 600:5 15 KV Indoor Bar Type Current Transformers for prime contractors working on Nashville Electric Service procurement projects. The units must be manufactured to meet IEEE 0.15 metering accuracy standards from 1 percent nominal current through the rating factor. Each unit requires specific NES identification, to be applied via CNC machining on name plates or embossed aluminum strips. The scope of work requires the delivery of three fully tested and labeled transformers to Nashville, Tennessee. This opportunity is categorized under NAICS code 335311 and is associated with the Nashville Electric Service in Tennessee.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

High-Speed Twist Drill SupplierThis subcontract agreement establishes a requirement for the supply and delivery of twelve high-speed twist drills to support prime contractors on Nashville Electric Service procurement projects. The specific technical requirements call for drills that are 5/8 inch in size with a 1/2 inch shank and jobbers length. To ensure quality and standardization, the supplier must provide part numbers from a restricted list of approved manufacturers, including Chicago, DeWitt, Precis, Morse, Clec, or Irwin, as alternate brands are strictly prohibited. The contract is managed by the Nashville Electric Service in Tennessee, with the place of performance located in Nashville. Interested parties must adhere to the procurement timeline, which includes a response deadline of October 22, 2026. The successful supplier is responsible for the complete delivery of all twelve units to the agency.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Solicitation # Z5379

Nashville Electric Service is soliciting bids under solicitation number Z5379 for the procurement of 60 round point shovels. The required specifications include an open back tempered steel blade measuring approximately 9 1/4 by 11 1/2 inches, a steel reinforced collar, and a contractor strength fiberglass handle. Only specific brands and part numbers are acceptable, including Union Forge 45-160, Ames Jackson SFGLR, and Hisco HIRP14L; alternate brands will not be accepted for this inquiry. Bids must be submitted through the Bid Center by 2:00 pm local time on the close date of October 22, 2026. Vendors are required to state their earliest delivery time in calendar days, as delivery speed may be a factor in the award decision. Shanna Faulk serves as the primary procurement contact for this solicitation. Any discrepancies between ordering descriptions and part numbers must be clarified with the buyer prior to the submission deadline.

POSTED

DEADLINE

Current Transformer

Solicitation # Z5382

Nashville Electric Service is soliciting bids for the procurement of three 600:5 15 KV Indoor Bar Type Current Transformers. The equipment must meet IEEE metering accuracy of 0.15 from 1 percent nominal current through the rating factor. The specified approved source is Arteche CID-17-750969120 or an equal alternative. Vendors quoting an alternate brand must provide the brand name in the comments field and attach all relevant descriptive literature. Strict marking and labeling requirements apply, as the manufacturer must attach NES numbers provided at the time of the purchase order. These numbers must be either embossed on a 1/2 by 3-1/2 inch aluminum strip attached to the name plate or CNC machined on the name plate with 3/8 inch tall lettering, and must also be listed on the outside of the shipping container. Bids must be submitted via the Bid Center by 2:00 pm local time on October 21, 2026. Evaluation factors include technical compliance and the earliest delivery time stated in calendar days, which may be considered in the final award decision.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

Solicitation # Z5385

Nashville Electric Service is soliciting bids under solicitation Z5385 for the procurement of three Basler BE1-50/51B-214 Relay Retrofit Kits. These kits are specifically designed as replacement relays without cases to fit inside existing General Electric Type IAC single phase time overcurrent relay cases. The agency has explicitly stated that alternate brands will not be accepted for this requirement. Bids must be submitted through the Bid Center by 2:00 pm local time on the closing date of October 22, 2026. A critical component of the evaluation is the delivery schedule, as vendors must state their earliest delivery in calendar days, and this timeframe may be a deciding factor in the award. For any clarifications regarding part numbers or descriptions, vendors should contact the procurement lead, Tiffany Caruthers, prior to the submission deadline.

POSTED

DEADLINE

Solicitation # Z5380

Nashville Electric Service is soliciting bids for the procurement of 12 high speed, jobbers length twist drills with a 5/8 inch size and 1/2 inch shank. This solicitation, identified as Z5380, requires strict adherence to approved manufacturers and part numbers, including Chicago-55440, DeWitt 1330-1 -5/8, and Precis R56 91440. Alternate brands are explicitly prohibited for this inquiry. Bids must be submitted through the Bid Center by 2:00 pm local time on October 22, 2026. A critical requirement for the proposal is that vendors must state their earliest delivery time in calendar days, as delivery speed may be a determining factor in the award decision. For any discrepancies between part numbers and descriptions, vendors must contact the procurement lead, Shanna Faulk, for clarification before the closing date.

POSTED

DEADLINE

Protection Cover

Solicitation # Z5384

Nashville Electric Service is soliciting bids for the procurement of 96 feet of Wildlife Protection Cover Stinger. These covers must have an inner diameter of approximately 5/8 inches and feature an overlapping design that allows for installation without disconnecting the lead wire from the bushing. The equipment must be compatible for use with a hot stick or rubber protective gloves. Only specific approved manufacturers and part numbers are acceptable, specifically Salisbury 58-12SC or 3M-INDUS CCI-266-125, and alternate brands will not be accepted. The solicitation, identified as Z5384, was posted on October 15, 2026, with a response deadline of October 22, 2026, at 2:00 pm local time. Bids must be submitted through the Bid Center. Evaluation factors for the award include technical compliance with the specified part numbers and the earliest delivery time stated in calendar days. The primary point of contact for this procurement is Tiffany Caruthers.

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS