This Solicitation opportunity from Michigan was posted on December 11, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Provide and install IceOMatic Machine

Closed

PKS755 12/11/24State & Local

Submission Closed01/14/2025, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333415

New

Federal

Facility Vacuum System Chillers

Solicitation # 75029

Hanford Laboratory Management and Integration, operating as NAVARRO-ATL and serving as a prime contractor for the U.S. Department of Energy, is seeking quotations for the procurement of two Facility Vacuum System Chillers. This solicitation, identified by number 75029, falls under NAICS code 333415 and is open to all qualified bidders as no specific set-aside has been applied. The opportunity was posted on October 28, 2026, with a response deadline of November 4, 2026. Interested parties should coordinate with the primary point of contact, Hilary Jamison, regarding this requirement for the facility located in Richland, Washington.

Hanford Laboratory Management And Integration Llc

POSTED

DEADLINE

36C25227Q0048 - COOLERS AND FREEZER

Solicitation # 36C25227Q00480001

Solicitation 36C25227Q0048 is a total set-aside for certified Service-Disabled Veteran-Owned Small Businesses (SDVOSB) issued by the Department of Veterans Affairs Great Lakes Acquisition Center. The project requires the provision and installation of an indoor walk-in cooler and freezer system at the Captain James A. Lovell Federal Health Care Center in North Chicago, Illinois. The unit must be engineered for on-grade installation with overall dimensions of 44 feet 6 3/4 inches by 31 feet 7 inches by 8 feet 6 inches. Technical specifications include 5 1/2 inch walls and ceilings for the freezer and 4 inch walls and ceilings for the cooler, featuring 26 gauge stucco white and galvanized finishes. The system must include specific accessories such as vapor proof lights, heated vents, and an exterior ramp, while complying with 2021 IEC C403.11 standards, the Energy Independence and Security Act of 2007, and IBC Section 2603.9. The procurement process has been updated via two modifications. Amendment 0001 provided redacted technical drawings, and Amendment 0002 extended the offer receipt deadline to October 30, 2026, at 10:00 AM CDT, and scheduled a site visit for October 27, 2026. Eligible offerors must be listed in the SBA certification database and adhere to the SBA Nonmanufacturer Rule and strict limitations on subcontracting, which prohibit paying more than 50 percent of the contract value to firms that are not certified SDVOSBs or VOSBs. Submissions must include a signed formal certification regarding subcontracting limitations to be considered for award. Misrepresentation of SDVOSB status may result in debarment for at least five years.

252-NETWORK Contract Office 12 (36C252)

POSTED

DEADLINE

Chiller Unit SupplyThis subcontract agreement involves the supply of industrial chiller units and manufacturer-specified components for prime contractors working on New York State Office of General Services facility projects. The scope of work requires the manufacturer to produce and deliver the physical chiller units and all associated hardware directly to the project site located in Batavia, New York. In addition to the delivery of equipment, the provider is responsible for supplying all necessary technical specifications and installation manuals. This procurement is categorized under NAICS code 333415, with a response deadline set for December 9, 2026.

NYS Office of General Services

POSTED

DEADLINE

Supplier of Duct-Type Air Cooling Coils (NSN 4130011916125)This subcontract involves the fabrication or procurement of three duct-type air cooling coils for prime contractors supporting DLA Troop Support supply contracts. The supplier must ensure all units meet NSN 4130011916125 and DLA Master List RA001 standards, with delivery terms set as FOB Origin. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 333415 for the Department of Defense. Strict adherence to regulatory requirements is mandatory, including NAVSEA 5100-003D mercury restrictions and DFARS 252.204-7012 cybersecurity reporting protocols. Additionally, all items must be packaged and marked in accordance with MIL-STD-129 and MIL-STD-2073-1E standards. The response deadline for this requirement is November 9, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Manufacturing and Supply of Duct-Type Air Cooling CoilsThis subcontract involves the manufacturing and supply of three duct-type air cooling coils for prime contractors supporting DLA Troop Support equipment. The coils must be fabricated according to NSN 4130011916128 specifications, utilizing mercury-free manufacturing processes and materials that comply with the Berry Amendment. Delivery is set as FOB Destination, with performance taking place in New Cumberland. The contractor is required to adhere to strict Department of Defense standards, including DFARS 252.204-7012 compliance. Packaging and marking must be executed in accordance with MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 guidelines. This effort falls under NAICS code 333415 and is managed through Construction & Equipment MRO SVC I.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Supply of Duct-Type Air Cooling Coils (NSN 4130-01-191-6131)This subcontract involves the manufacture or procurement of three duct-type air cooling coils under NSN 4130-01-191-6131 for prime contractors supporting DLA Troop Support. The contractor must adhere to the DLA Master List of Technical and Quality Requirements (RA001) and ensure all items are packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. Additionally, the provider must maintain strict compliance with the Buy American Act and the Berry Amendment. The final deliverables consist of three accepted cooling coil assemblies to be shipped to the DDSP in New Cumberland, Pennsylvania. This requirement is managed by Construction & Equipment MRO SVC I for the Department of Defense under NAICS code 333415, with a response deadline set for November 9, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Manufacture of Duct-Type Air Cooling CoilsThis subcontract involves the manufacture of three duct-type air cooling coils for prime contractors supporting Department of Defense supply contracts. The units must be fabricated according to NSN 4130-01-191-6112 and P/N 19-80-2972M specifications, with performance taking place in Bremerton. The contractor is required to adhere to the DLA Master List of Technical and Quality Requirements and DFARS 252.204-7012. Additionally, all materials must be free of intentionally added mercury in compliance with NAVSEA 500-003D. The response deadline for this requirement is November 9, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Pump Assembly (NSN 2930-01-088-1170) SupplierThis subcontract opportunity is for the manufacture or procurement of three complete pump assemblies under NSN 2930-01-088-1170 for the DLA Weapons Support Land Supply Chain. The supplier must ensure all assemblies adhere to the DLA Master List of Technical and Quality Requirements and comply with the Buy American Act, the Berry Amendment, and specific environmental restrictions concerning mercury and ozone-depleting chemicals. The final products are to be delivered FOB Origin to the designated location in Tracy, California. The project is designated as a Total Small Business Set-Aside under NAICS code 333415. Interested parties must submit their responses by November 9, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Duct-Type Air Cooling Coil SupplierThis subcontract involves the manufacture or sourcing of three duct-type air cooling coils, specifically part number 19-80-2612M1, to support prime contractors delivering for DLA Troop Support. The supplier must ensure that all units are mercury-free in accordance with NAVSEA 5100-003D and adhere to strict military standards for packaging and marking under MIL-STD-2073-1E and MIL-STD-129. The contract requires full cybersecurity compliance per DFARS 252.204-7012. Final delivery of the finished cooling coils is designated as FOB Destination to New Cumberland, Pennsylvania. This opportunity is managed under NAICS code 333415 for the Department of Defense.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Supply of Duct-Type Air Cooling Coils (NSN 4130-01-191-6145)This subcontract involves the supply of three inspected duct-type air cooling coils for prime contractors working on Department of Defense projects via DLA Troop Support. The required hardware must meet NSN 4130-01-191-6145 and Edge Electronics Corp PN 19-80-2983M specifications. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 333415. The contractor must ensure strict adherence to several regulatory standards, including NAVSEA 5100-003D mercury restrictions, MIL-STD-2073-1E for packaging, and MIL-STD-129 for marking. Additionally, all materials provided must comply with the Buy American Act and the Berry Amendment. The response deadline for this requirement is November 9, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

FILTER ELEMENT, AIR CON

Solicitation # SPE8E8-27-T-0165

Solicitation SPE8E8-27-T-0165 is a fixed-price request for quotations issued by DLA Troop Support, Construction and Equipment, for the procurement of eight air conditioning filter elements under NSN 4130-01-464-7012. The contract requires delivery to DLA Distribution San Joaquin in Tracy, California, with a delivery window of 167 days after order. Shipping is designated as FOB Origin, and both inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Technical and quality requirements are governed by the DLA Master List via reference RA001. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware. Compliance with the Buy American and Balance of Payments Program is required for quotes exceeding the micro-purchase threshold, and all payment requests must be processed electronically through the Wide Area WorkFlow system.

POSTED

DEADLINE

COOLING COIL, AIR, DUCT

Solicitation # SPE8E9-27-T-0281

Solicitation SPE8E9-27-T-0281 is a request for quotations issued by DLA Troop Support, Construction and Equipment MRO SVC I for the procurement of three duct-type air cooling coils. The required hardware is identified as NSN 4130-01-191-6145, specifically Edge Electronics Corporation part number 19-80-2983M. Delivery is required within 153 days after order, with a need ship date of April 12, 2027, and an original required delivery date of August 1, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Technical and quality requirements are governed by the DLA Master List, and specific restrictions are placed on the use of mercury per NAVSEA 5100-003D. Offerors must comply with the Buy American Act, the Berry Amendment, and cybersecurity standards including DFARS 252.204-7012 for safeguarding covered defense information. Notably, items produced via additive manufacturing are ineligible for award unless specifically authorized. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 24 hours ago

DEADLINE

in 12 days

AI Contract Overview

The contract involves the supply and installation of a new Ice-O-Matic ICEU220HA ice machine at a location within the City of Livonia, Michigan, under the jurisdiction of the City of Livonia, Michigan. The project requires delivering and setting up the specified ice machine in accordance with provided specifications, ensuring proper installation and operational readiness. The solicitation was posted on December 11, 2024, with a response deadline set for January 14, 2025. The contract value is estimated to range between $5,000 and $15,000, reflecting a moderate scope of work suitable for small to medium-sized procurement. Interested vendors are encouraged to contact Emily Tchorz-Fielder via email at [email hidden] or by phone at [phone hidden] for further inquiries or clarifications. The procurement process is managed by the City of Livonia, which is categorized under the State and Local Government Entities (SLED). Additional details and the solicitation can be accessed through the provided online link, offering a comprehensive overview of the bidding process and submission requirements.

General Info

Agency

Michigan → City of Livonia

NAICS

333415 - Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

Place of Performance

MI, USA

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedDec 11

Solicitation

Response DeadlineJan 14

Deadline has passed

Submission Closed

01/14/2025, 12:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyMichigan → City of Livonia

Contacts1 person available

OfficeN/A

Organization / Agency

Michigan → City of Livonia

Office AddressN/A

Contacts

Emily Tchorz-FielderContact Person

contact@example.gov

+1 (555) 000-0000

Full Description

PKS755 12/11/24 - Supply and set up an Ice-O-Matic Machine. Location: Wayne County, Michigan, United States, specifically in the City of Livonia. The contract entails supplying and installing one new Ice-O-Matic ICEU220HA machine according to the specifications provided. For inquiries, please reach out to Emily at contact@example.gov or call +1 (555) 000-0000.