Top

PULLEY, FLAT

Active

SPE7M222R0024Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

The Department of Defense's Defense Logistics Agency (DLA) Land and Maritime is seeking market information through a Sources Sought Notice for approximately 555 units of NSN 3020-01-461-2732, identified as a flat pulley used in aircraft launch and recovery equipment. This notice is not a solicitation for proposals or bids but is intended to gather industry capability data to inform future acquisition decisions. The item must meet stringent specifications related to the critical application item category, including packaging and preservation requirements outlined in military standards such as MIL-STD-2073-1D and MIL-STD-129. The pulley assemblies require specific cleaning, lubrication with approved grease formulations, and packaging using heavy-duty waterproof materials to prevent corrosion, with strict marking and palletization instructions to ensure traceability and durability during storage and shipment. The anticipated procurement will adhere to these detailed packaging and handling instructions, including special preservative methods, labeling, and shipment to a designated DLA distribution center in San Diego, California. The acquisition will likely be FOB Destination with inspection and acceptance at origin, though set-aside status for small businesses is undecided. Interested suppliers are encouraged to respond by completing the provided market survey and submitting it by the specified deadline. The solicitation process will be managed by DLA Land and Maritime’s office in Columbus, Ohio, with Alisha Blanton as the primary point of contact.

General Info

DLA seeks market info for 555 aircraft pulleys with strict military packaging and handling requirements.

Agency

Department Of Defense → DLA Land And Maritime

NAICS

333612 - Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

Place of Performance

Set-Aside

NONE

Documents

DLA Land and Maritime Market Research 3020-01-461-2732

3 pages · sources-sought

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSources Sought

PostedSep 13

Sources Sought

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / AgencyDepartment Of Defense → DLA Land And Maritime

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

Alisha Blanton

contact@example.gov

+1 (555) 000-0000

Full Description

This is a Sources Sought Notice and is for information purposes only. THIS IS NOT A REQUEST FOR PROPOSALS, QUOTATIONS, OR BIDS. All of the following information is approximate and may be altered in the actual solicitation. Responses to this sources sought announcement will be used by the Government to make appropriate acquisition decisions. DLA Land and Maritime anticipates issuing a solicitation in the near future for approximately 555 EA of NSN 3020-01-461-2732. Item will be purchased IAW the following: CSI AIRCRAFT LAUNCH AND RECOVERY EQUIPMENT (ALRE) CRITICAL APPLICATION ITEM Advance Development & Manufacturing (05201) P/N: 626857-3 Form Fit and Function LLC (1P6K0) P/N: 626857-3 The anticipated packaging requirements are as follows: PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP: 001 PRES MTHD: 54 CLNG/DRY: 1 PRESV MAT: ZZ WRAP MAT: GC CUSH/DUNN MAT: AD CUSH/DUNN THKNESS: F UNIT CONT: F2 OPI: M PACK CODE: U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE: ZZ -ZZ Special Requirements PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT LEVEL OF PACKING: A LEVEL OF PRESERVATION: MILITARY PACKING: A PER MIL-STD-2073-1, APPENDIX A, TABLE A.I, PARTS THAT MOVE ON BEARINGS (ANY MATERIAL) SHALL BE PRESERVED METHOD 50. FLOATING BAG, DESICCANT, AND HUMIDITY INDICATOR REQUIRED - SEE MIL-STD-2073-1, PARAGRAPHS 5.2.3.7 a-c FOR DETAILS. BEARINGS REQUIRE DESICANT FOR LONG TERM STORAGE. DO NOT APPLY DESICANT DIRECTLY TO THE PRODUCT. PLACE WRAPPING MATERIAL IN BETWEEN PRODUCT AND DESICANT. PER DRAWING: 1. CLEANING: THE SHEAVE ASSEMBLY SHALL BE CLEANED OF ALL TEMPORARY PRESERVATIVES, OR ANY OTHER COATING OR SUBSTANCES APPLIED TO THE SHEAVES DURING MANUFACTURE OR ASSEMBLY. CLEANING MAY BE ACCOMPLISHED BY ANY PROCESS WHICH WILL NOT DAMAGE THE COMPONENTS OF THE SHEAVE ASSEMBLY. 2. ZZ = PRESERVATIVE MATERIAL: LUBRICATION: FOLLOWING THE CLEANING PROCESS, THOROUGHLY IMPREGNATE THE ROLLER ASSEMBLY WITH THE GREASE MOBILITH SHC 460 OR SHC 220. APPLY THE GREASE TO ANY OTHER NON-CORROSIVE RESISTANT FERROUS COMPONENTS OF THE SHEAVE ASSEMBLY. 3. WRAP AND SEAL: TIGHTLY WRAP EACH SHEAVE ASSEMBLY WITH A FLEXIBLE GREASEPROOF WATERPROOF BARRIER MATERIAL (WAPPING MATERIAL CODE: GC) FOLLOWING APPLICATION OF THE GREASE. PLACE THIS ASSEMBLY INTO HEAVY DUTY WATERPROOF HEAT-SEALABLE BAG. EVACUATE THE AIR FROM THE BAG AND HEAT SEAL. 2. PACKAGING: SHEAVE ASSEMBLIES SHALL BE BOXED IN ACCORDANCE WITH ASTM D6251 TYPE I OR II, CLASS 2, TREATMENT B, STYLE A OR B. THE ASSEMBLY SHALL BE BLOCKED AND BRACED TO PREVENT PHYSICAL CONTACT WITH OTHER ASSEMBLIES AND TO PROVIDE A COMPACT NON-SHIFTING LOAD. ZZ - SPECIAL MARKING REQUIREMENTS: EACH UNIT PACKAGE WILL BE MARKED WITH THE NSN, CONTRACT NUMBER, LOT NUMBER, CONTRACTOR CAGE CODE, MANUFACTURER CAGE CODE, AND PART NUMBER. 02 - ARROW UP 03 - METHOD 50; 14 - CENTER OF BALANCE 24 - OPEN FOR INSPECTION OR USE ONLY OPEN THIS SIDE MECHANICAL HANDLING REQUIRED: PER MIL-STD-129, SERIAL NUMBER SHALL BE MARKED ON THE UNIT, INTERMEDIATE, AND SHIPPING CONTAINERS. WHEN SERIAL NUMBER MARKING REQUIRED, THE PACKING LIST SHALL CONTAIN SERIAL NUMBERS PER MIL-STD-129R, PARAGRAPHS 5.4.1.1.1, 5.4.1.1.2, 5.4.1.2.1, AND 5.4.1.2.2. IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION, PACKAGING, PACKING AND MARKING. If Product First Article Testing (FAT) is required and a Packaging FAT is included in the Special Packaging Instruction or Drawing, the Packaging FAT requirement is invoked. If there is no Product FAT, no Packaging FAT is required. Material is anticipated to be shipped to: SW3218 DLA DISTRIBUTION SAN DIEGO 3581 CUMMINGS ROAD BLDG 3581 SAN DIEGO CA 92136-3581 US The solicitation is anticipated to require FOB Destination and Inspection and Acceptance of the supplies and packaging at Origin. Whether or not this acquisition will be set aside for small businesses is yet to be determined. All interested parties are invited to express your interest in this procurement by completing the attached Market Survey and returning to the buyer, Alisha Blanton, contact@example.gov, +1 (555) 000-0000 on or before September 23, 2022.