This Government Contract opportunity from Utah was posted on July 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Pump and Dispensing Equipment Supply and Installation

Closed

State & Local

Submission Closed07/21/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333911

New

SLED

Pump Station and Equipment SupplyThe contract seeks the supply of water pump systems encompassing submersible and centrifugal pumps, control panels, and related power components to support critical water infrastructure needs. The solicitation is open as a subcontract opportunity under NAICS code 333911 with a response deadline of August 18, 2026, and was posted on August 7, 2026. All equipment must meet specified technical requirements to ensure reliable performance in water distribution or management applications. The place of performance and detailed delivery instructions are undetermined, though the contracting entity is the State of Utah, indicating the systems will serve public utilities or water management projects within the state. Interested parties must submit proposals before the deadline to be considered for award, with no set-aside provisions identified for small businesses or other categories.

POSTED

DEADLINE

Flushing Devices Supply

POSTED

DEADLINE

Pump Equipment Supply (OEM or Distributor)The contract calls for the supply of new sewage pumps, specifically submersible or vertical turbine models, engineered to meet strict technical requirements for flow rate, head capacity, material composition, and motor ratings suitable for drywell applications. These pumps must be supplied by either the original equipment manufacturer or an authorized distributor, ensuring compliance with performance standards critical for reliable wastewater handling in municipal or infrastructure settings. The equipment is intended for use by the Ontario Clean Water Agency under the Government of Ontario, with delivery and installation expected to align with operational needs at designated locations within the province. The solicitation, posted on August 6, 2026, requires responses to be submitted no later than August 31, 2026, at 4:00 PM, and is classified as a subcontract under NAICS code 333911 for pump and pumping equipment manufacturing. There is no set-aside designation specified, and the opportunity is open to qualified suppliers regardless of business size or status. The place of performance and point of contact details are not provided in the available data, but the procurement is managed through the Ontario Tenders portal, where full technical specifications and submission guidelines can be accessed via the provided link. Bidders must ensure their proposals meet all engineering and compliance criteria to be considered.

Ontario Clean Water Agency

POSTED

DEADLINE

Pump and Fluid Transfer System Supply

Texas Department of Transportation

POSTED

DEADLINE

High-Pressure Pump and Plumbing System SupplyThe contract involves the supply and integration of a high-pressure pump system designed to deliver a consistent output of 120 PSI at a flow rate of 50 GPM, specifically tailored for use with brine solutions. The system must be constructed using poly or stainless steel plumbing components and equipped with stainless steel fasteners to ensure corrosion resistance and long-term durability in harsh chemical environments. All materials and components must meet stringent compatibility requirements to prevent degradation or failure when exposed to brine over extended operational periods. This is a subcontract solicitation issued by the Texas Department of Transportation with a posting date of August 6, 2026, and a response deadline of August 27, 2026. The NAICS code 333911 identifies the industry classification as other commercial and service industry machinery manufacturing, indicating the technical nature of the equipment being procured. The place of performance and specific location details are not provided, but the work is expected to support Texas transportation infrastructure needs. Interested parties must submit proposals prior to the deadline through the public portal linked in the contract data.

Texas Department Of Transportation

POSTED

DEADLINE

Centrifugal Pump System ManufacturingThe contract entails the manufacture and supply of a centrifugal pump system designed with corrosion protection, sealed ball bearings, grease lubrication lines, and water-lubricated bearings to ensure durability and low maintenance in demanding environments. The equipment must meet specific operational and material standards to withstand exposure to corrosive elements, with all components fabricated to precise engineering specifications to guarantee reliability and longevity. The system requires full integration of grease lines for bearing lubrication and water-lubricated bearing technology to eliminate the need for oil-based lubricants, enhancing environmental compatibility and reducing operational hazards. Performance of this subcontract is tied to the Department of Natural Resources in South Carolina, with a response deadline of September 2, 2026, and a solicitation posted on August 6, 2026. The NAICS code 333911 identifies this as a project in the other industrial machinery manufacturing sector, indicating specialized pump production rather than generic mechanical assembly. The place of performance and recipient details are unspecified, but all deliverables must align with state agency requirements for infrastructure or environmental systems. Subcontractors are expected to comply with all technical, quality, and delivery conditions outlined in the solicitation, with no set-aside classification indicated, meaning all eligible entities may compete for the award.

Department Of Natural Resources

POSTED

DEADLINE

Vertical Turbine Pump Supply

POSTED

DEADLINE

Vacuum System and Pump SupplyThe contract solicits the supply of high-capacity vacuum pumps, tanks, hoses, valves, and control panels for integration into truck-mounted sewer cleaning systems, with the equipment intended for use by the Texas Department of Transportation. The items must meet technical specifications for performance, durability, and compatibility with existing vehicle platforms, ensuring reliable operation in demanding municipal and infrastructure maintenance environments. All components are to be delivered in a fully functional and integrated state, ready for installation and operational deployment. The solicitation, posted on August 5, 2026, requires proposals to be submitted by September 8, 2026, and is structured as a subcontract under NAICS code 333911, which corresponds to the manufacturing of other commercial and service industry machinery. The place of performance and agency office details are not specified, but the work is directly tied to Texas DOT operations. Interested suppliers must ensure compliance with all technical and logistical requirements, as failure to deliver fully functional systems may result in contract non-compliance. The opportunity is accessible via the Texas SmartBuy portal.

Texas Department of Transportation

POSTED

DEADLINE

Supply of Centrifugal Housing UnitsThe contract calls for the manufacture and supply of two centrifugal housing units with National Stock Number 4140013587865, ensuring full compliance with applicable federal specifications, labeling standards, and delivery protocols. These units are to be produced and delivered in accordance with stringent defense procurement requirements, with performance required at Tracy, California, ZIP 95304-5000. The solicitation is structured as a subcontract under NAICS code 333911, indicating the industrial classification for pump and pumping equipment manufacturing, and is issued by DLA Dist San Joaquin under the Department of Defense. The response deadline is set for August 17, 2026, with the solicitation posted on August 5, 2026, leaving a twelve-day window for qualified vendors to submit proposals. All bids must align with federal standards governing product quality, documentation, and logistical delivery to meet the operational needs of the defense supply chain.

POSTED

DEADLINE

Supply of Sewage Pumping Units (WHR7-23 Model)The contract involves the manufacture and delivery of WHR7-23 sewage pumping units in accordance with detailed technical specifications, ensuring full compliance with required performance and quality standards. The contractor is responsible for all aspects of production, including quality assurance protocols, appropriate packaging to safeguard the units during transit, accurate labeling for identification and handling, and timely shipment to the designated DLA distribution point at New Cumberland, Pennsylvania, with ZIP code 17070-5002. This is a subcontract under the Department of Defense, managed by the DDSP New Cumberland Facility, and falls under NAICS code 333911 for Other Commercial and Industrial Machinery and Equipment Manufacturing. The opportunity was posted on August 5, 2026, with proposals due by August 17, 2026, and must be submitted through the DIBBS portal using the specified solicitation link.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Chemical Feed System Supply and InstallationThe contract is for the supply and installation of a chemical feed system designed for water treatment applications, encompassing all necessary components including storage tanks, pumps, dosing controls, and integrated sensors that interface with the Building Automation System. The system must be fully operational upon installation, ensuring precise chemical delivery for optimal water quality management. The work is restricted to Service-Disabled Veteran-Owned Small Businesses under the SDVOSB set-aside program, and the NAICS code 333911 identifies it as machinery manufacturing for water and wastewater treatment equipment. Performance is required at the facility in North Chicago, Illinois, with a zip code of 60064-3048, and all submissions must be received by September 23, 2026. The solicitation was posted on August 5, 2026, and the contract type is a subcontract under the Department of Veterans Affairs, specifically managed by the 252-NETWORK Contract Office 12. The vendor is expected to meet technical specifications for system integration, reliability, and compliance with federal procurement standards, with no alternative performance locations permitted.

252-NETWORK Contract Office 12 (36C252)

POSTED

DEADLINE

Hydraulic and Pumping System IntegrationThe contract mandates the supply and integration of positive displacement pumps, valves, and hydraulic controls specifically for use in an oil purification system, ensuring reliable transfer and circulation of oil under demanding operational conditions. The equipment must be engineered for durability and precision, with emphasis on maintaining consistent flow rates and pressure stability throughout the purification process, and is intended for deployment within federal facilities managed by the Department of the Interior. This is a subcontract set aside exclusively under the SBA Certified Women-Owned Small Business (WOSB) Program, requiring proposers to meet specific certification and ownership criteria. The NAICS code 333911 indicates the scope falls under other commercial and service machinery manufacturing, and all responses must be submitted by the deadline of August 11, 2026. The work is to be performed at an unspecified location under the oversight of the Grand Coulee Power Office, with no public point of contact listed; interested parties must engage through the provided SAM.gov portal for full details and submission requirements.

Grand Coulee Power Office

POSTED

4 days ago

DEADLINE

in 2 days

AI Contract Overview

The contract entails the supply and installation of 5:1 stub pumps, hose reels, meters, valves, and related dispensing equipment necessary for handling fuel, oil, coolant, and other vehicle maintenance fluids. The scope includes the full lifecycle of the equipment installation, ensuring proper integration and operational readiness at the designated performance location. All items must meet technical specifications for durability, safety, and efficiency in high-use maintenance environments, with particular attention to accuracy in fluid dispensing and system reliability under routine operational conditions. The opportunity is posted as a subcontract with a response deadline of July 21, 2026, and was made available on July 13, 2026. The NAICS code 333911 identifies it under the machinery manufacturing sector, specifically for pumps and pumping equipment. The agency responsible is the State of Utah, though no specific office address or point of contact details are provided. Interested parties must submit proposals through the designated Utah BonfireHub portal by the specified deadline to be considered for award.

General Info

Supply and install fuel, oil, and coolant dispensing equipment per Utah contract by July 21, 2026.

Agency

UtahView Agency

NAICS

333911 - Pump and Pumping Equipment ManufacturingView NAICS

Place of Performance

UT, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 13

subcontract

Response DeadlineJul 21

Deadline has passed

Submission Closed

07/21/2026, 09:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyUtah

ContactsNo contacts available

OfficeN/A

Organization / Agency

Utah

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply and installation of 5:1 stub pumps, hose reels, meters, valves, and associated dispensing equipment for fuel, oil, coolant, and other vehicle maintenance fluids.