This Solicitation opportunity from Department Of Defense was posted on September 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Pumping Assembly, Water

Closed

SPRDL1-24-R-0166Federal

Submission Closed10/16/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

FLUID HANDLING DIVISION

POSTED

DEADLINE

DEFLECTOR, DIRT AND LIQ

Solicitation # SPE7M1-27-T-1440

Solicitation SPE7M1-27-T-1440 is issued by the DLA Weapons Support Maritime Supply Chain for the procurement of six dirt and liquid deflectors, identified by NSN 4320010996676, for use on AC Motor Model No. A-320-25. The contract specifies a delivery period of 154 days with shipping terms as FOB Origin, destined for DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination. The procurement is not a small business set-aside and falls under NAICS code 333914. The contractor must adhere to strict material and quality standards, including the prohibition of Class I ozone-depleting chemicals and intentional mercury use. Technical and quality requirements are governed by the DLA Master List (RA001), while packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American and Balance of Payments Program (DFARS 252.225-7001). All quotes must be submitted through the DLA Internet Bid Board System.

Defense Logistics Agency

POSTED

DEADLINE

PUMP, FUEL, METERING AND

Solicitation # SPE7LX-27-U-0479

Solicitation SPE7LX-27-U-0479 is a total small business set-aside issued by the DLA Weapons Support Strategic Acquisition Program Directorate for the procurement of fuel metering and distributing pumps. The requirement, identified by NSN 2910016214592, specifies an estimated annual quantity of two units. This is a unilateral Simplified Indefinite-Delivery Contract with a maximum value of 350,000.00 dollars and a potential one-year duration. Delivery is required within 55 days after the order, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Award decisions will be based on price and other factors most advantageous to the government, though any offers utilizing additive manufacturing are ineligible for award. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting standards. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

Defense Logistics Agency

POSTED

DEADLINE

REEL ASSEMBLY, STATIC D

Solicitation # SPE8EE-27-T-0206

Solicitation SPE8EE-27-T-0206, issued by DLA Troop Support Construction and Equipment Manu and Con on October 22, 2026, is for the procurement of 180 units of Reel Assembly, Static Discharge, identified by NSN 4930-01-662-4915. The requirement is designated as a total small business set-aside under NAICS code 333914, with a need ship date of January 16, 2027, and a required delivery date of February 16, 2027. Delivery is specified as FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and packaging standards, requiring compliance with ASTM D3951, MIL-STD-129 for marking and labeling, and RP001 for palletization. All DLA Master List of Technical and Quality Requirements take precedence over ASTM standards. Inspection will occur at the destination per FAR 52.246-1. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Additionally, the procurement prohibits the use of additive manufacturing unless specifically authorized and requires compliance with the Buy American Act and NIST SP 800-171 cybersecurity assessment requirements.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-131B

This small business set-aside solicitation, issued by the DLA Land and Maritime Fluid Handling Division, is for the procurement of one rotary pump (NSN 4320-01-545-5157). The requirement specifies approved parts from MTH Tool Company Inc. (P/N SC61BC SS) or DRS Environmental Systems Inc (P/N C61BC SS), though alternate parts may be proposed if accompanied by a complete data package. The delivery is required within 168 days after order, with a need ship date of November 17, 2026, and a final delivery destination in Tracy, California. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, with DLA Master List technical requirements taking precedence. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for all invoicing and payment requests. Key regulatory compliance includes the Buy American Act, Berry Amendment, and various DFARS clauses regarding cybersecurity (252.204-7012) and the prohibition of covered defense telecommunications equipment. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS).

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPMYM4-27-P-3049

Solicitation SPMYM4-27-P-3049 is a total small business set-aside issued by the Department of Defense, specifically DLA Maritime - Pearl Harbor, for the acquisition of five external manual mixers (Wiwa Mixing Station, P/N 0650946). The procurement is conducted under FAR 13 Simplified Acquisition Procedures, with a requested delivery date of December 30, 2026. Delivery, inspection, and acceptance are all set for the Pearl Harbor Naval Shipyard IMF in Hawaii. The award will be based on the lowest price technically acceptable (LPTA) method, requiring offerors to demonstrate technical capability by providing the exact items requested. The contract mandates strict adherence to marking and packaging standards, including MIL-STD-130 for unique item identification and MIL-STD-129 for shipment labeling. Payment will be processed through the Wide Area Work Flow (WAWF) system using the COMBO document type. Key regulatory requirements include the Buy American and Balance of Payments Program, safeguarding of covered defense information per DFARS 252.204-7012, and a prohibition on hexavalent chromium. Offerors must be registered in the System for Award Management (SAM) and provide detailed pricing basis, such as commercial catalogs or sales history, to be considered for award.

DLA Maritime - Pearl Harbor

POSTED

DEADLINE

Hydraulic Fluid Bulk Dispensing Unit

Solicitation # N6833527Q1002

The Naval Air Warfare Center Aircraft Division intends to procure several specialized hydraulic equipment components to support the United States Navy MQ-4C and Royal Australian Air Force programs. The required hardware includes a Hydraulic Fluid Bulk Dispensing Unit, a Small Corrosion Control Cart, a Triton Hydraulic Fluid Purifier, a Hydraulic Fluid Servicing Unit, and a Tank and Pump Unit. Due to the specialized nature of the equipment, the government intends to solicit these items on a limited competitive basis from the Original Equipment Manufacturer, Hydraulic International, Inc., or vendors possessing a formal Letter of Authorization from them. This Sources Sought notice is not a request for proposals, but interested parties may submit capabilities statements for government review. All inquiries and submissions should be directed to Duane Hines via email.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

Solicitation # N0010427QJA25

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-1855

Solicitation SPE7M1-27-T-1855 is a request for quotations issued by the Defense Logistics Agency (DLA) Weapons Support Maritime Supply Chain for the procurement of one Gas Seal Conversion Kit, identified by NSN 4320-01-564-4824 and part number NSD-6038. The requirement is designated as a total small business set-aside under NAICS code 333914. The item is to be delivered FOB Destination to the USS WASP LHD 1 at FPO AE 09514 within 20 days after order, with an original required delivery date of October 28, 2026. Inspection and acceptance will take place at the destination. The contract mandates strict adherence to technical and quality standards, including MIL-STD-130 for Item Unique Identification (IUID), MIL-STD-129 for marking, and MIL-STD-2073-1E for packaging. Palletization must comply with DLA packaging requirements (RP001). Key regulatory requirements include CMMC Level 2 Self-Assessment, the Buy American and Balance of Payments Program, and NIST SP 800-171 assessment requirements. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. Offerors are encouraged to submit quotes via DIBBS and may provide quantity ranges to accommodate volatile demand.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Diesel Powered Trash Pump

Solicitation # W912EQ27QA004

Solicitation W912EQ27QA004 is a Firm Fixed Price purchase order issued by the Department of Defense, specifically the W07V Endist Memphis, for the procurement of two diesel-powered trash pumps and accessories for the Ensley Engineer Yard. The pumps must be 6-inch self-priming units featuring Tier 4 77.3 cubic inch 3-cylinder diesel engines producing 23.2HP with electric start and two operating speeds of 2700 and 3000 RPM. Required accessories for each pump include a 6-inch by 25-foot suction hose and a 6-inch by 50-foot discharge hose, both with quick connect couplers, and a trailer equipped with a 2-inch coupler and three support jacks. The vendor is responsible for the complete delivery and off-loading of the equipment to 2915 Riverport Road, Memphis, TN. This procurement is a Total Small Business Set Aside and will be awarded using the Lowest Price Technically Acceptable method, evaluating technical acceptability, satisfactory past performance, and price. Critical responsiveness requirements include active registration in the SAM database and the submission of a NIST score in the Supplier Performance Risk System. Amendment 0001 extended the response deadline to November 13, 2026, and corrected the coupler size and delivery dates. Payment will be processed electronically via the Wide Area WorkFlow system. Contractors must coordinate delivery with the Supply Manager at least three days in advance and notify the Contracting Office within seven days of delivery.

POSTED

DEADLINE

IA New Pump Purchase (CPN)The Bureau of Reclamation, under the Department of the Interior, has issued a forecast for the purchase of new pumps for the Columbia-Pacific Northwest region. This procurement action is categorized under NAICS code 333914, which pertains to the manufacturing of other pumping and compressor equipment. The forecast was posted on October 30, 2026, and lists Kelli Jasperson as both the primary point of contact and the Small Business Specialist. Further details regarding the solicitation and specific performance locations are currently pending as the project remains in the forecasting stage.

Bureau of Reclamation

POSTED

DEADLINE

SSB Friant Dam Sump Pumps (CGB)The Bureau of Reclamation, under the Department of the Interior, has issued a forecast for the SSB Friant Dam Sump Pumps project within the California-Great Basin region. This procurement effort is categorized under NAICS code 333914, which pertains to the manufacturing of other fluid dispensing machinery. The project is currently in the forecasting stage with a posted date of October 30, 2026. Interested parties may coordinate with Kelli Jasperson or Small Business Specialist Nandini Johnson for further information regarding this requirement.

Bureau of Reclamation

POSTED

4 days ago

DEADLINE

N/A

AI Contract Overview

Solicitation SPRDL1-24-R-0166 is a firm fixed price procurement issued by DLA Land Warren for Water Pumping Assemblies, specifically Part Number M53051-2-2, NSN 4320-01-691-1630. These Type 2, Size 2 assemblies must be built to MIL-PRF-53051D specifications with a capacity of 600 gallons per minute at 350 feet total head. The requirement consists of 14 basic units and 14 option units, established as a 100 percent Total Small Business Set-Aside. Key deliverables include the hardware and several data items, including a First Article Test Report and a Commercial Off-the-Shelf Operator's Manual. The contract mandates First Article Testing (FAT) with government approval required prior to production, although a waiver may be requested. Delivery for the basic production quantity is set at 750 days after award, with the FAT report due at 360 days. The FOB point for production CLINs is Destination. Packaging must adhere to MIL-STD-2073-1 and MIL-STD-129, with specific requirements for heat-treated wooden crates conforming to ISPM 15 and DOD 4140.65M. Inspection and acceptance will occur at the origin, requiring coordination with the DCMA before shipment. Payment will be processed electronically through the Wide Area WorkFlow system.

General Info

Small business fixed price contract for 14-28 water pumping assemblies per MIL-PRF-53051D.

Agency

Department Of Defense → DLA Land Warren

NAICS

333914 - Measuring, Dispensing, and Other Pumping Equipment Manufacturing

Place of Performance

Set-Aside

SBA

Documents

2 pages · amendment

High

4 pages · specifications

High

125 pages · ifb

High

2 pages · amendment

High

2 pages · amendment

High

2 pages · amendment

High

amendment

High

34 pages · other

Medium

AI Contract Breakdown

Uniform Contract Format

Timeline

5 updates

PhaseClosed

PostedDec 11

Presolicitation

Deadline changedAug 18

Response deadline changed from Jan 27, 2025 to Sep 18, 2025.

Type ChangedOct 30

Presolicitation → Solicitation

Notice updatedNov 13

Response deadline changed from Nov 21, 2025 to Dec 5, 2025. The notice description changed.

Notice updatedDec 3

The notice description changed.

Notice updatedDec 5

The notice description changed.

Notice updatedSep 14

Response deadline changed from Dec 5, 2025 to Oct 16, 2026. The notice description changed.

Response DeadlineOct 16

Deadline has passed

Submission Closed

10/16/2026, 09:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA Land Warren

Contacts2 people available

OfficeWARREN, MI, 48397, USA

Organization / AgencyDepartment Of Defense → DLA Land Warren

Office AddressWARREN, MI, 48397, USA

Contacts

John P. Moses

contact@example.gov

+1 (555) 000-0000

DLA Warren Contract Opportunities

contact@example.gov

Full Description

** NOTE **: The below questions and answers regarding the Publications and Packaging CDRL portions of the solicitation are posted here for your reference:

Packaging - Attachment 15 Question(s)

1. Section F calls out preserving all exterior unpainted metal surfaces in accordance with MIL-STD-2073 and coating said surfaces with preservative MIL-PRF-16173, Grade 1. In MIL-PRF-53051D, Section 3.10, it states that CARC paint shall not be applied to surfaces greater than 400F which means our metallic exhaust guard would not be painted. Is this coating able to be applied to surfaces greater than 400F? Additionally, is there a reason that preservative MIL-PRF-16173, Grade 1 is not listed in MIL-PRF-53051D anywhere?

2. Is there a MIL, ISO, FDA or some other standard that the corrosion preventative coating for food handling machinery and equipment must meet? Additionally, why is this not a requirement for the Type II - Pump Assembly, Water in MIL-PRF-53051D?

The SPI calls out a preservative that can be used on bare metal when the item is in storage to prevent corrosion. I’m not sure where MIL-PRF-53051D is coming from, it maybe from the PD, which would be engineering and could be focusing on the inside of the pump.

If the contractor wants to use a different preservative on non-metal, it will need to be from MIL-STD-2073, Appendix J and that preservative would need to meet the functionality of MIL-PRF-016173.

3. As far as the packaging preservative goes, these systems are painted with Chemical Agent Resistant Coating (CARC) which has anti-corrosive properties already in it as called out in MIL-PRF-53051D which is the MIL-PRF that these systems are manufactured too. Additionally, they are required based on the solicitation to be delivered in heat treated wooden crates. Is the packaging team stating that the preservative needs to be applied to the wooden crate or the exterior of the unit? The internals of the pump system are already cast aluminum and stainless steel which are inherently corrosion resistant.”

I’m not seeing where MIL-PRF-53051D was listed in packaging. I reviewed the pkg contract language and CDRLs and didn’t see where it was mentioned. Did the contractor see that in the Purchase Description? If so, that would be an engineering question to answer.

As far as the wooden crate, it needs to follow heat treatment requirements per DOD 4140.65M and the requirements of the International Standards for Phytosanitary Measures 15 (ISPM), Regulation of Wood Packaging Material as laid out in Section D of the contract.

*** Amendment 0005 is issued to extend the proposal due date out to 16 Oct 2026, change the FOB point from Origin to Destination for the production CLINs, revise the Section C Statement of Work (SOW) to remove references to Provisioning, Publications, and Technical Manuals, revise the list of addenda and attachments in Section J, remove select CDRLs and attachments as required, add a CDRL for a Commercial Off-the Shelf (COTS) Operator's Manual in Section J for government review prior to approval, and add/delete or update any clauses or provisions as required (especially due to the revolutionary FAR overhaul).

*** Amendment 0004 is issued to extend the proposal due date out to 05 Dec 2025 ***

*** Amendment 0003 is issued to extend the proposal due date out to 21 Nov 2025 ***

*** Amendment 0002 is issued to extend the proposal due date out to 31 Oct 2025 ***

*** Amendment 0001 is issued to extend the proposal due date out to 10 Oct 2025 ***

Item: Pumping Assembly, Water

NSN: 4320-01-691-1630

P/N: M53051-2-2 (CAGE 81349, Government)

Qty: 14 each basic, 14 each option

Packaging: Military A

FOB: Destination

Contract Type: Definitive contract with 100% option for 365 days

Notes: This procurement is established as a 100% Total Small Business SetAside. First Article Testing (FAT) is required (provision for FAT waiver is allowed) and Government approval must be obtained prior to manufacturing the production quantity. Part number M53051-2-2 (Water Pump, 600 GPM) is built utilizing the standards listed in MIL-PRF-53051D (dated 20 Apr 2022). A copy of the MIL-PRF is attached in the Pre-Solicitation notice for this opportunity. The solicitation includes a Statement of Work (SOW) in Section C, with a list of packaging data, safety/security and hazardous material data required by the Government. These details are listed on the solicitation as narratives, Contract Data Requirements List (CDRLs) and attachments. There are 7 CDRLs and 7 attachments that support the CDRLs. Thoroughly review the solicitation document and amendments for all requirements prior to submitting your proposal.

***** Contact the Contract Specialist to obtain all of the CDRL and attachment documentation via the DoD Safe Site. *****