This Solicitation opportunity from Texas was posted on August 21, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Purchase & Installation Of A Vehicle Lift Gate

Closed

1279082State & Local

Submission Closed08/30/2024, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238290

New

ACT-1033-01 NAS Perimeter Door Replacement Bldg. 300 at the William J. Hughes Technical Center, Atlantic City, NJ

Solicitation # act-1033-01-nas-perimeter-door-replacement-bldg-300-william-j-hughes-technical-center-atlantic-city

This contract, solicitation number act-1033-01-nas-perimeter-door-replacement-bldg-300-william-j-hughes-technical-center-atlantic-city, involves the provision and installation of two sets of interior commercial door assemblies at the NAS laboratory facility, Building 300, located within the William J. Hughes Technical Center at Atlantic City International Airport in New Jersey. The scope of work includes replacing existing door sets as well as performing necessary modifications, reframing, and finishing of the existing metal stud gypsum wall board door openings. The estimated magnitude of construction for this project is between 250,000 and 500,000 dollars. This opportunity is set aside for small businesses, including certified veteran-owned, service-disabled veteran-owned, women-owned, and HUBZone small businesses. Managed by PTSI Managed Services Inc., the solicitation was posted on October 29, 2026, with a response deadline of November 18, 2026.

PTSI Managed Services Inc.

POSTED

DEADLINE

Centennial JCC Panic Hardware Services (Electrical Room Egress Doors)

Solicitation # Panic Hardware (Electrical Room Egress Doors)

Management & Training Corporation (MTC) is soliciting bids for the installation of commercial-grade panic hardware on electrical room egress doors at the Centennial Job Corps Center in Nampa, Idaho. The scope of work includes conducting site surveys to verify door dimensions and fire ratings, procuring Grade I heavy-duty panic bars, exterior trim, rim cylinders, strikes, and door closers, and performing installation and testing. All work must adhere to NEC 2023 Article 110.26(C)(3), NFPA 101 Life Safety Code, and ADA standards. To ensure fail-safe operation, contractors must perform at least 10 consecutive cycle tests on all installed hardware. This is a fee-for-service subcontracting opportunity open to small businesses, including certified VOSB, SDVOSB, WOSB, and HUBZone entities under NAICS code 238290. Bidders must be licensed in the State of Idaho and provide three references for similar projects. Required submission documents include a completed bid sheet with lump sum and individual deficiency pricing, a W-9, a self-certification form, and acceptance of terms and conditions. All bids must be submitted via email to Sandra Clore by December 1, 2026, at 3:00pm MST. The contract is subject to various federal regulations, including the Davis-Bacon Act for prevailing wage rates and fringe benefits, as well as FAR clauses regarding Buy American preferences and combating trafficking in persons. Contractors are required to comply with DOL records management, mandatory training, and privacy breach notification requirements. Payment will be issued upon the submission of invoices for materials and services that have been delivered and accepted by MTC. Final inspection and acceptance will occur at the MTC designated point of delivery.

Management & Training Corporation/Centennial Job Corps Center

POSTED

DEADLINE

Kitchen Elevator Upgrade and Repair Service - NHSP-M

Solicitation # RFP NHDOC 2027-07

The New Hampshire Department of Corrections is soliciting proposals for a firm fixed price or not-to-exceed contract to provide comprehensive upgrades and repairs for a 1985 Dover Corporation passenger elevator at the New Hampshire State Prison for Men. The elevator, which serves two floors of the kitchen and has a 4,000-pound capacity, requires a new power unit including the motor, hydraulic valve, pump, oil reservoir, and muffler, as well as the installation of four security key switches and eight keys. All work must be performed by New Hampshire licensed professionals and comply with all local, state, and federal elevator codes, with final safety test results submitted to the New Hampshire Department of Labor. The project is expected to start in January, with a final completion deadline of June 30, 2027. Proposals are due by 2:00 PM EST on November 13, 2026, and must be submitted as separate sealed technical and cost proposals. Evaluation is based on a combined score of the technical proposal, which focuses on organizational experience, correctional facility expertise, and approach, and the cost proposal. Award selection may involve a Best and Final Offer process. Selected vendors must maintain significant insurance coverages, including commercial general liability of at least 1 million dollars per occurrence, and adhere to strict correctional facility security protocols, including tool inventories and compliance with PPD 371. Payment will be issued within 30 days of receiving approved monthly itemized invoices.

Department Of Corrections

POSTED

DEADLINE

Window Installation & Supply

POSTED

DEADLINE

Utility Duct Bank & Trenching

POSTED

DEADLINE

UIL Generator Replacement

Solicitation # 1305M327Q0009

Department Of Commerce Noaa

POSTED

DEADLINE

J039--561A4-25-500 Elevator Repair Building 6 and 53

Solicitation # 36C24226R0097

Solicitation 36C24226R0097 is a Request for Proposal issued by the Department of Veterans Affairs for the emergency upgrade and modernization of four elevators at the VA New Jersey Healthcare System Lyons Campus, specifically targeting one passenger elevator in Building 6 and one service and two passenger elevators in Building 53. The scope of work requires the contractor to provide all labor, materials, and supervision to install non-proprietary microprocessor-based control systems, new geared machines, car operating panels with braille markings, hall fixtures at ADA compliant heights, and complete shaft wiring. All work must adhere to current safety codes, including fire recall features and door lock monitoring, and comply with the Davis-Bacon Act for prevailing wage rates. This procurement is a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 238290. To be eligible, the prime contractor must be a licensed elevator maintenance company with a full-time mechanic on staff and a clean safety record, certifying no more than three serious, one repeat, or one willful OSHA or EPA violation in the last three years. Proposals are evaluated based on technical capability, past performance, and price, with a requirement to submit a current Experience Modification Rate (EMR) and certifications for the Buy American Act and limitations on subcontracting. Following several extensions to accommodate requests for information, the final deadline for proposal submission is 1:00 PM on Thursday, October 29, 2026.

242-NETWORK Contract Office 02 (36C242)

POSTED

DEADLINE

Playground Equipment InstallationThis subcontract involves the supply and installation of playground and sport equipment for prime contractors working on City of Tustin public works projects. The scope of work specifically includes the installation of units such as the Goblin's Climbing and Play Planetarium, encompassing the construction of foundations and the application of safety labels. All delivered playground structures must be provided with a manufacturer warranty. The project is categorized under NAICS code 238290 and is managed by the Public Works agency in California. Interested parties must submit their responses by the deadline of December 10, 2026. Further details regarding this opportunity can be accessed through the official procurement portal.

POSTED

DEADLINE

Outdoor Fitness Equipment InstallationThis subcontract opportunity involves the supply and installation of outdoor fitness equipment for prime contractors working on public works projects for the City of Tustin. The scope of work includes the installation of fitness pods and the necessary coordination of foundations and anchors to ensure proper placement and stability. To maintain warranty standards, the project requires the use of manufacturer-certified installers. The final deliverable is the provision of fully completed and warranted fitness equipment. Interested parties must respond by December 10, 2026.

POSTED

DEADLINE

Overhead Door Maintenance and Repair ServicesThe Overhead Door Maintenance and Repair Services subcontract involves providing semi-annual preventative maintenance and on-call repair services for Maryland State Highway Administration facility projects. The scope of work includes executing 20-point inspections, adjusting spring tension and door alignment, and lubricating rollers and bearings to ensure doors remain fully operational. All services must be performed by technicians with at least two years of professional experience and must strictly adhere to MOSH and OSHA safety regulations. The contractor is responsible for delivering maintained operational doors and detailed inspection reports. This opportunity is categorized under NAICS code 238290 and was posted on October 28, 2026, with a response deadline of November 18, 2026.

State Highway Administration

POSTED

DEADLINE

Solicitation # SPE8E6-27-T-0463

Solicitation SPE8E6-27-T-0463 is a small business set-aside request for quotation issued by the Defense Logistics Agency Troop Support, Construction and Equipment office. The contract is for the procurement of one unit of thermal insulation pipe fitting and sleeving, identified by NSN 5640-01-146-1898. The required delivery date is March 27, 2026, with a delivery timeframe of five days after receipt of order. The items are to be delivered FOB Origin to the Anniston Army Depot in Alabama, with inspection and acceptance occurring at the destination. The contractor must adhere to strict quality and technical standards, including ISO 9001:2015 and DLA master list requirements such as RP001 for packaging and RQ032 for export control of technical data. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129. Invoicing and payment processing are required through the Wide Area WorkFlow system. Additionally, the contract incorporates various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information and cyber incident reporting.

Defense Logistics Agency

POSTED

DEADLINE

Elevator Preventative Maintenance ServicesThis subcontract for Elevator Preventative Maintenance Services involves providing scheduled maintenance, testing, and lubrication for elevator systems at the Manteno Veterans Home for the Illinois Department of Veterans Affairs. The scope of work includes the cleaning and adjustment of power units, hydraulic components, control systems, hoistways, pits, and door equipment. The selected contractor is responsible for delivering detailed written reports and completed maintenance logs to ensure operational safety and efficiency. To be eligible, contractors must hold a valid license from the Illinois State Fire Marshal Elevator Division and maintain strict compliance with 225 ILCS 312. This opportunity falls under NAICS code 238290. Interested parties must submit their responses by November 12, 2026, at 3:00 PM.

MANTENOVH497 - Manteno Veterans Home

POSTED

1 day ago

DEADLINE

in 14 days

AI Contract Overview

The San Antonio Water System (SAWS) is seeking bids for the purchase and installation of a vehicle lift gate, specifically the Tommy Gate model G2-60-1342-EA38 or an approved equivalent. All pricing must include delivery and freight costs, with the awarded contract going to the lowest qualified bidder based on overall bid competitiveness for both the base year and any extensions. The project scope requires the bidder to supply all necessary location, labor, tools, and equipment for installation, ensuring the materials are new, of high quality, and backed by at least a two-year warranty. The installation must meet high standards of craftsmanship, result in a neat appearance, and not void any vehicle or manufacturer warranties. Bidders are responsible for verifying deck dimensions prior to installation and obtaining approval for any deviations from specifications. Post-installation, SAWS will inspect the work within five business days, and any damages caused during installation must be repaired within ten business days. All design changes require prior approval from SAWS representatives. The RFQ emphasizes the importance of submitting electronic quotes before the deadline of August 30, 2024, as late submissions will not be considered. It encourages online submission to streamline the process and reduce errors. For technical support, bidders can contact Ion Wave’s Customer Success Team. The contract is valued between $10,000 and $50,000 and is managed by SAWS in Texas, with primary contact Stephanie Macy. Additional details and the opportunity to view the solicitation are available through the provided online link. The contract also includes provisions for reporting ethics violations impacting SAWS.

General Info

Agency

Texas → San Antonio Water System

NAICS

238290 - Other Building Equipment Contractors

Place of Performance

TX, USA

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 21

Solicitation

Response DeadlineAug 30

Deadline has passed

Submission Closed

08/30/2024, 12:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTexas → San Antonio Water System

Contacts1 person available

OfficeN/A

Organization / AgencyTexas → San Antonio Water System

Office AddressN/A

Contacts

Stephanie Macy

contact@example.gov

+1 (555) 000-0000

Full Description

RFQ GUIDELINES
SAWS requests that all pricing furnished include delivery/freight (i.e., F.O.B. Destination). Each item listed shall be awarded to the bidder providing the overall lowest qualified bid, base year and extensions considered, if applicable. SAWS reserves the right to award this RFQ to one source. Terms and Conditions of this RFQ and resultant Purchase Order will be in accordance with the Terms and Conditions document contained on the "Attachments Tab".
Electronic quotes cannot be accepted after the specified date/ time. Quotes received late will not be considered in the evaluation.
SCOPE: Bidder will provide the location, labor, tools, and equipment required to perform the installation of a liftgate of Tommy Gate model # G2-60-1342-EA38 or approved equal. All material shall be new and specifically suited for the specific use. The new materials shall have a warranty of at least two (2) years, unless requested otherwise. The quality of work provided by the bidder must be of the highest standard of commercially acceptable practice for the class of work, and must result in the liftgate having a neat, clean, and finished appearance. Bidder will ensure installation of the liftgate will not void vehicle warranty or manufacture warranty. The bidder will verify loading deck size before installation. If deviations from the minimum specifications are needed, bidder will contact SAWS representative for approval. Once the work is completed, the bidder will provide a minimum of five (5) business days for SAWS representative to inspect the work for discrepancies. Bidder will ensure any damage made to the vehicles by its employee(s) is repaired within ten (10) Business Days. Any design changes will need to be approved by SAWS representatives.
We highly recommend online submission. This expedites the process and reduces errors for both buyer and supplier.
For technical assistance, please contact Ion Wave's Customer Success Team: +1 (555) 000-0000 x 4 or email contact@example.gov.
To report suspected ethics violations impacting the San Antonio Water System, please call +1 (555) 000-0000.