Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Purchase of Centimeter-Level Accuracy/Survey-Grade GNSS Physical Receiver

Active
W9128F26QA087Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Department of Defense through the Office of Endist Omaha is soliciting commercial off-the-shelf GNSS receivers capable of centimeter-level accuracy or survey-grade performance, along with integrated operational software and firmware necessary for full system operation. This procurement is designated as a Small Business Set Aside under NAICS code 334511, meaning only eligible small businesses may submit proposals. The solicitation, identified by number W9128F26QA087, was posted on July 31, 2026, with a firm deadline for responses on August 19, 2026, at 6:00 p.m. EST. Performance will occur in Omaha, Nebraska, and all equipment must meet stringent technical requirements for precision positioning without customization or modification. Primary point of contact for technical inquiries is Grant Hibbs, reachable at Grant.M.Hibbs@usace.army.mil, with secondary support provided by Mika N. Mahyenga. The contract is classified as combined, indicating potential integration of both requirements for hardware and software into a single award. Proposals must demonstrate full compliance with the published purchase description detailing functional, operational, and performance benchmarks. The office is located at 68102-4901 in Omaha, Nebraska, and all submissions must adhere strictly to the guidelines outlined in the solicitation document accessible via the SAM.gov link provided.

General Info

U.S. DoD seeks small businesses to supply centimeter-accurate GNSS receivers and software for Omaha, Nebraska, by August 19, 2026.

Agency

Department Of Defense → W071 Endist OmahaView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

Omaha, NE, 68102, USA

Set-Aside

SBA

Documents

(2)

B.08.02+-+Solicitation+-+W9128F26QA087.pdf

PDF

A.02.14+-+Purchase+Description+-+GNSS+receiver.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W071 Endist Omaha
Contacts2 people available
OfficeOMAHA, NE, 68102-4901, USA
Organization / Agency
Department Of Defense → W071 Endist Omaha
View Agency Profile
Office AddressOMAHA, NE, 68102-4901, USA
Contacts
Grant Hibbs
contact@example.gov
Mika N. Mahyenga
contact@example.gov

Full Description

Show more

The government requires commercial of-the-shelf (COTS) centimeter-level accuracy/survey-grade GNSS (Global Navigation Satellite System) receivers and integrated operational software/firmware. See attached purchase description for more details.

Similar Contracts

Same NAICS industry code

NAICS: 334511
New
SLED
IWQ 134772 Acrulog Detectors
Solicitation # PE-77023-NONST-2027-000000690
Gwinnett County Government is soliciting quotes for Acrulog Detectors under solicitation number PE-77023-NONST-2027-000000690, with a response deadline of August 7, 2026, at 7:50 PM. The solicitation, posted on July 31, 2026, is open to eligible vendors and falls under the SLED classification, indicating it is for state, local, or educational government procurement. All submissions must come from firms not on Gwinnett County’s ineligible source list; any firm currently debarred, suspended, or otherwise prohibited from doing business with the county will have their proposals rejected without consideration, even if they receive automatic solicitations. The point of contact for inquiries is Jenny Coleman, reachable by phone at 770-822-8734 or email at Jenny.Coleman@gwinnettcounty.com. The place of performance is within the state of Georgia, and further details can be accessed via the provided state procurement portal link.
Gwinnett County Government

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
SLED
Notice of Intent to Sole Source - GPS-based safety monitoring solution
Solicitation # 20260314
The City of Port St. Lucie is seeking to sole source a GPS-based safety monitoring solution under solicitation number 20260314, with a response deadline of August 10, 2026 at 6:00 PM Eastern Time. This solicitation, issued by the Police Department under the State of Florida, aims to enhance public safety through technology and is open to qualified vendors who can meet the specified requirements. Contractors may submit either a traditional hard-copy bid bond or an electronic bid bond through the approved Surety2000 platform, in accordance with the bond and letter of credit provisions outlined in Section 5.1 of the solicitation. The primary point of contact for inquiries is Brianne Nasso, Manager of Police Grant & Travel, reachable at 772-807-4426 or bnasso@cityofpsl.com, with Alaina Knofla, Procurement Contracting Officer III, also available for support at 772-871-5144 or aknofla@cityofpsl.com. The physical location for performance is not specified, but the issuing agency is based in Port St. Lucie, Florida, with the online portal accessible via the provided UI link for additional details.
Police

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334511
New
SLED
Sensys Networks FlexMag2 Detection Sensors and Installation Epoxy
Solicitation # PE-66098-NONST-2027-000000143
The City of Sandy Springs is moving forward with a sole source procurement to acquire Sensys Networks FlexMag2 detection sensors and installation epoxy for integration with its existing SCOOT traffic-signal system. The contract, identified by solicitation number PE-66098-NONST-2027-000000143, is being awarded exclusively to Intelligent Transportation Services, Inc. based on the vendor’s unique positioning as the only supplier capable of providing compatible hardware and materials that meet the technical specifications required for the current system. The agency has determined that no other vendor can fulfill the specific requirements necessary to ensure seamless functionality and operational continuity with the SCOOT infrastructure. The solicitation was posted on July 31, 2026, and any supplier wishing to challenge the sole source determination must submit a written response with supporting documentation demonstrating their ability to meet all stated technical requirements before the deadline of September 1, 2026, at 5:00 PM. The primary point of contact for inquiries is Connie Donley, reachable via phone or email, and the procurement is being managed under the oversight of the City of Sandy Springs in Georgia. The place of performance is within the city limits of Sandy Springs, and no set-aside classification or NAICS code is specified for this transaction.
City of Sandy Springs

POSTED

about 18 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
Federal
58--PROCESSOR,COUNTERME, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QMA79
The contract opportunity pertains to the repair or modification of a processor classified under NSN 7R-5865-015492378-QF with Technical Data Package version 001, requiring seven units to be delivered FOB origin. It is issued under solicitation number N0038326QMA79 by the Naval Supply Systems Command Weapon Systems Support, a branch of the Department of Defense, with the office located in Philadelphia, Pennsylvania. The solicitation was posted on July 16, 2026, and responses are due by August 31, 2026, at 4:00 a.m. Eastern Time. This is a presolicitation notice indicating the government is seeking industry input prior to formal release, and no set-aside type has been determined. The primary point of contact is Autumn M. Rau, reachable via email at Autumn.M.Rau2.civ@us.navy.mil or by phone at (717) 697-4313, with additional fax and email details provided for correspondence. The place of performance is undefined, and no NAICS code has been assigned.
Navsup Weapon Systems Support

POSTED

about 18 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
Federal
66 - FMS Repair - Control Display Unit
Solicitation # N0038326QF165
The U.S. Navy, through NAVSUP Weapon Systems Support in Philadelphia, is seeking a sole source repair for one Control Display Unit with National Stock Number 6605-016040696 and part number 292A860-3, designated as a Critical Application Item under FMS Case SR-P-MAL. Due to the lack of sufficient, accurate, or legible technical data in government possession, the requirement cannot be competitively sourced and must be awarded under an existing Blanket Ordering Agreement to the current approved provider. The item is subject to Free Trade Agreements and the World Trade Organization Government Procurement Agreement, requiring Government Source Approval prior to award, and delays in securing a new approved source would impede timely fulfillment. Proposers not already approved must submit all requested documentation as outlined in the NAVSUP WSS Source Approval Brochure, or their proposal will be disqualified. The contract includes a 365-day induction period for the initial unit, with the government retaining the right to extend this period by an additional 365 days, and any unused capacity from the first year may be carried forward. Contractors must provide pricing for up to ten total units over the full contract term, including the initial unit, with separate pricing if costs change after the first year. The total contract value for evaluation purposes will be based on the highest proposed unit price multiplied by the maximum quantity. Offers must be submitted by August 5, 2026, and inquiries should be directed to Dana Scott at the provided email address.
Navsup Weapon Systems Support

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334511
New
Federal
58--TRANSMITTER,COUNTER, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QMA75
The contract solicitation pertains to the repair or modification of a counter transmitter, identified by NSN 7R-5865-014980544-QF and TDP VER 001, with a quantity of six units required. The work is to be performed under a presolicitation notice issued by the Naval Supply Systems Command Weapon Systems Support, operating under the Department of Defense. Delivery is specified as FOB origin, meaning the supplier is responsible for the goods until they are loaded at their facility, after which responsibility transfers to the government. The solicitation was posted on July 16, 2026, with a response deadline of August 31, 2026, at 4:00 AM. The primary point of contact is Autumn M. Rau of N761.07, reachable via email at AUTUMN.M.RAU2.CIV@US.NAVY.MIL or by phone at (717) 697-4313, with a fax number provided for additional communication. The office is located in Philadelphia, Pennsylvania, with no specific place of performance detailed beyond the issuing agency. There is no set-aside designation or NAICS code listed for this solicitation, indicating it is open to all eligible offerors.
Navsup Weapon Systems Support

POSTED

about 18 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
Federal
HYDROPHONE BAFFLE RINGS
Solicitation # N0016426Q0256
The U.S. Navy, through the Naval Surface Warfare Center Crane, is seeking Hydrophone Baffle Rings under a sole source procurement with limited competition authorized under FAR 13.106-1, targeting three previously approved vendors: Brownstown Quality Tool & Automation, LLC, Wagler Competition Products, and Stark Precision Machine. The solicitation, numbered N00164-26-Q-0256, was issued on July 31, 2026, with responses due by 2:00 PM Eastern Time on August 6, 2026, and is classified under NAICS code 334511 for semiconductor and other electronic component manufacturing. Offerors must be registered in the System for Award Management and the Joint Certification Program to access controlled documents, and all submissions must be emailed directly to Jaclyn Bailey at the designated Navy email address. While the Government retains full discretion to proceed without open competition, any responsible source may submit a capability statement, though such submissions are evaluated solely for the purpose of determining whether to initiate a competitive process. The requirement is not subject to any small business set-aside, and all updates or amendments will be published only on Contract Opportunities at sam.gov, making it the sole authoritative source for changes prior to the deadline. Any modifications issued after the closing date will be communicated exclusively to those who submitted offers.
Nswc Crane

POSTED

about 18 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
Federal
Egyptian Navy Autonomous INTelligence System (AINTS) Platform Integration
Solicitation # N0003926RE014
The Naval Information Warfare Systems Command intends to award a three-year contract under solicitation N0003926RE014 to integrate the Autonomous INTelligence System (AINTS) for the Egyptian Navy through a Foreign Military Sales case, supporting enhanced operational capabilities under the PEO C4I International Integration Program Office. This acquisition, classified under NAICS code 334511 with a size standard of $10 million, will involve full and open competition for the design, engineering, procurement, integration, testing, installation, training, and follow-on support services. The contract will include Cost Plus Fixed Fee line items for labor, cost-reimbursement non-fee bearing line items for travel and other direct costs, and firm-fixed-price line items for equipment, materials, and spares, with an anticipated award timeframe between June 2027 and June 2030. Access to the full Request for Proposal will require submission of a signed Non-Disclosure Agreement by each individual needing access to Controlled Unclassified Information, and interested parties must designate a single point of contact to consolidate and submit all NDAs on behalf of their organization and any team members or subcontractors. All responses to this pre-solicitation notice are voluntary and will become the property of the U.S. Government without reimbursement; no commitment to issue a contract is made, and no costs incurred in response to this notice will be compensated. Proposals and inquiries must be directed in writing to Kristin White and Kimberly Ellis at the provided Navy email addresses. The notice serves only to inform industry of an upcoming procurement and is not an invitation to bid. Future updates, including the formal RFP release, will be posted exclusively on the Procurement Integrated Enterprise Environment and Contract Opportunities site on SAM.gov, and it is the responsibility of respondents to monitor these platforms continuously. The place of performance is listed as San Diego, California, with the contracting office located at the Naval Information Warfare Systems Command headquarters.
Naval Information Warfare Systems

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334511
New
Federal
ASR-8 and ASR-9 Encoders
Solicitation # 6973GH-26-MS-00006
The FAA is seeking information from potential vendors capable of supplying ASR-8 and ASR-9 encoders, critical components used in radar antenna systems for azimuth position tracking within the National Airspace System. These encoders, identified by specific part numbers and NSNs, are currently manufactured exclusively by Sensor Systems LLC and are formally approved under FAA configuration management control. Due to the lack of alternative suppliers, qualifying a new source would involve extensive engineering, testing, and production delays that risk prolonged outages at multiple FAA facilities. This market survey is not a request for proposals but rather a tool to assess the availability of qualified competitors and determine if set-asides for small businesses, service-disabled veteran-owned small businesses, or 8(a) certified firms are feasible. The NAICS code is 334511 with a small business size standard of 1,350 employees. Interested vendors must submit a detailed capability statement including proof of rights to use OEM data, evidence of qualification and manufacturing capability, past performance details, and a copy of ISO 9001:2015 certification. Proof of active registration in SAM.gov is mandatory, and vendors claiming 8(a) or SDVOSB status must provide applicable certification letters. Responses must be emailed to the designated point of contact by August 14, 2026, at 2:00 pm CT and must be clearly marked with the solicitation number 6973GH-26-MS-00006. The FAA will not compensate vendors for costs incurred in preparing submissions. This initiative supports the FAA’s acquisition planning process and aims to identify viable sources to ensure continuity of critical radar system components. Additional support through the DOT Short Term Lending Program is available for eligible small and disadvantaged businesses seeking working capital for transportation-related contracts.
6973GH Franchise Acquisition Svcs

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334511
New
Federal
Notice of Intent to Sole Source –USAFADS F16 Helmets
Solicitation # F3GHDA6133AG01
The United States Air Force, through the 99th Contracting Squadron at Nellis Air Force Base, Nevada, is conducting market research via a sources sought synopsis for custom HGU-55/P Thunderbird helmets to support the USAF Air Demonstration Squadron’s training and airshow missions. The requirement calls for helmets with custom-molded liners, integrated communication components, oxygen mask fittings, aerodynamic exterior shaping, and Thunderbird-specific paint and finishing, fully compatible with F-16C/D avionics and current USAFADS communication systems. This effort involves procuring ten each of large, medium, and extra-large fiberglass liners, with all items subject to strict export controls under ITAR or EAR, prohibiting any transfer to non-U.S. persons without explicit government authorization. All respondents must be registered in the System for Award Management and must clarify their socio-economic status as a small business, 8(a), HUBZone, or service-disabled veteran-owned business, along with any foreign ownership or planned use of foreign national employees. The NAICS code is listed as 334511 for avionics and other instruments manufacturing, though the narrative references 315990 for apparel manufacturing; respondents must also self-certify their size under a 600-person standard. The government intends to evaluate responses to determine whether the subsequent solicitation will be a total small business set-aside under FAR 19.5, with small business prime contractors required to perform at least 50 percent of the work. Responses are voluntary and will not form a binding contract; they are strictly for market research to inform future acquisition decisions. Submissions must be sent via email to sedrina.welches@us.af.mil with the exact subject line “F3GHDA6133AG01 - USAFADS F16 Helmets,” limited to one or more PDF, DOC, DOCX, XLS, or XLSX files totaling less than 10 MB, with no ZIP or EXE attachments permitted. All responses are due no later than 10:00 AM Pacific Time on July 6, 2026, and respondents are responsible for confirming receipt with the point of contact before the deadline. No formal solicitation, pricing, or evaluation criteria exist at this time, and no reimbursement will be provided for submission costs.
FA4861 99 Cons Lgc

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
Federal
58--TRANSMITTER,COUNTER, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QMA76
The contract solicitation pertains to the repair or modification of a transmitter, counter, identified by NSN 7R-5865-014980544-QF, with a quantity of six units required. The technical data package version is VER 001 and the reference number is 2680605G001. Delivery is specified as FOB origin, meaning the buyer assumes responsibility for transportation costs and risks once the items leave the seller’s location. The solicitation, numbered N0038326QMA76, was posted on July 16, 2026, with a response deadline of August 31, 2026. It is classified as a presolicitation, indicating it is for informational purposes prior to formal bidding. There is no set-aside designation, and no NAICS code is provided. The contracting activity is managed by the Naval Supply Systems Command Weapon Systems Support under the Department of Defense, with the office located in Philadelphia, Pennsylvania. Primary point of contact is Autumn M. Rau, reachable via email and phone, and all correspondence should be directed through the provided contact details. The place of performance is unspecified.
Navsup Weapon Systems Support

POSTED

about 18 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
Federal
58--RECEIVER,COUNTERMEA, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QMA78
The contract pertains to the repair or modification of a receiver for countermeasures, identified by NSN 7R-5865-015490474-QF and referenced under TDP VER 001 and REF NR 2680377G002, with a quantity of four units required. Delivery is specified as FOB origin, meaning the buyer assumes responsibility for the goods once they leave the supplier’s location. The solicitation, numbered N0038326QMA78, was posted on July 16, 2026, with a response deadline of August 31, 2026, at 4:00 a.m. Eastern Time. It is classified as a presolicitation, indicating that formal bidding has not yet commenced and further details may be forthcoming. The contracting office is the Naval Supply Systems Command Weapon Systems Support, part of the Department of Defense, located in Philadelphia, Pennsylvania. The primary point of contact for inquiries is Autumn M. Rau, reachable via email at AUTUMN.M.RAU2.CIV@US.NAVY.MIL, with phone and fax numbers provided. No set-aside type or NAICS code is specified, and the place of performance has not been defined beyond the overarching agency jurisdiction.
Navsup Weapon Systems Support

POSTED

about 18 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → W071 Endist Omaha

Same awarding agency

NAICS: 531120
New
Federal
Lease for office space - 3,635 Sq Ft Required
Solicitation # DACA455270013300
The U.S. Government is seeking new office space in Omaha, Nebraska, to replace its current leased premises that are set to expire. The requirement is for 3,635 square feet of office and related space, with the need to evaluate economically viable alternatives that meet operational needs. Consideration will be given to factors such as the availability of suitable alternatives, the inclusion of janitorial services in the lease terms, and the total cost of relocation, including physical move expenses, replication of tenant improvements, telecommunications infrastructure upgrades, and potential downtime that could impact agency productivity. The solicitation, issued under number DACA455270013300, is classified under NAICS code 531120 and is being managed by the Department of Defense through the W071 Endist Omaha office. Proposals are due by August 5, 2026, and the space must be available in the 68114 zip code area of Omaha. Primary contact for inquiries is Amy Cirivello, reachable via email at amy.l.cirivello@usace.army.mil.
Lessors of Nonresidential Buildings (except Miniwarehouses)

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details
NAICS: 236220
New
Federal
Renovate AERO Lab at USAFA
Solicitation # W9128F26SM021
The project, titled Renovate AERO Lab at USAFA, is a market research initiative led by the Department of Defense through W071 Endist Omaha to gather industry input for a future construction solicitation at the United States Air Force Academy in Colorado Springs, Colorado. The scope involves a comprehensive interior modernization of the facility to transform it into a state-of-the-art research environment while preserving its historic exterior. Key work includes upgrading interior finishes, repairing walls and ceilings, and modernizing mechanical, electrical, and plumbing systems to support increased workstation capacity for researchers and improved Cadet study areas. The renovation will also incorporate updates to existing classrooms aligned with the Classroom and the Future concept, enhance Cadet workshop spaces with dedicated infrastructure for 3D printing and rapid prototyping, and replace exterior glazing to comply with current anti-terrorism/force protection regulations. The estimated project value ranges between $10 million and $25 million, with a NAICS code of 236220 for commercial and institutional building construction. The solicitation number is W9128F26SM021, and responses to this sources sought notice are due by 1400 MDT on June 22, 2026, submitted via email to the designated point of contact, Shayna Zeleznik. Respondents must be potential prime construction contractors with a demonstrated single-job bonding capability of at least $20 million and must specify their performance and payment bond capacity. All submissions must include company identification, CAGE Code, Unique Entity Identifier, SAM registration status, and SBA socioeconomic classifications, such as Small Business, SDVOSB, WOSB, HUBZone, or Large Business status. Submissions are limited to five-page narratives detailing similar past projects, including start and end dates, project costs, complexity, and references with owner contact information. The notice explicitly states this is not a request for proposal and will not accept unsolicited bids; rather, it is an early market assessment to inform a future solicitation scheduled for issuance around September 2026, with an estimated award date in January 2027. Contractors must also acknowledge that if a formal contract is awarded, limitations on subcontracting under FAR 52.219-14 will apply, and all work must be performed at the designated location without disruption to the building’s historic facade.
Commercial and Institutional Building Construction

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 237120
New
Federal
Los Alamitos AASF Tank Repair Maintenance
Solicitation # W9128F26RA060
The U.S. Army Corps of Engineers, Omaha District, intends to solicit proposals for the repair and maintenance of a vertical above-ground tank at Los Alamitos AASF in California under solicitation number W9128F26RA060, with the Request for Proposal scheduled for issuance on or about July 28, 2026, and closing on or about August 25, 2026, at 2:00 PM CT. The work is classified under NAICS code 237120, Oil and Gas Pipeline and Related Structures Construction, with a small business size standard of $45 million, and the acquisition is set aside exclusively for small businesses. The scope of work, detailed in a draft statement of work and drawings, encompasses necessary repairs and maintenance activities for the designated tank, and a site visit is tentatively planned for ten days after the solicitation is posted on SAM.gov, with full details to be provided in the official solicitation. All prospective offerors must maintain an active registration in the System for Award Management (SAM.gov) and ensure their electronic annual representations and certifications are current, as these are mandatory for access to solicitation documents and bid eligibility. The electronic certifications must be updated at least annually to remain valid, with validity lasting one year from the date of submission or last update. Proposals must be submitted through SAM.gov, and all communication regarding the pre-solicitation should be directed to Contract Specialist Tony Manna at tony.j.manna@usace.army.mil or by phone at 402-995-2907. The contract office is located at 1616 Capital Ave, Omaha, NE 68102-4901, and performance will take place entirely at the Los Alamitos AASF facility in Orange County, California.
Oil and Gas Pipeline and Related Structures Construction

POSTED

about 18 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 331420
New
Federal
Recyclable Materials Processing (Copper/Steel Recovery)The contract involves processing stator sections to recover copper windings and steel laminations, with financial reimbursement tied to prevailing commodity market prices for these scrap materials. The work is classified as a small business set aside under SBA guidelines, specifically designated for total small business participation, and falls under NAICS code 331420 for primary metal manufacturing. Performance of the contract is required at Pickstown, with all processing activities expected to occur at this location. The solicitation was posted on July 30, 2026, and responses must be submitted by August 14, 2026. The contracting agency is the Department of Defense through W071 Endist Omaha, and the procurement is structured as a subcontract under the federal acquisition system. Financial recovery is contingent on the market value of the recovered copper and steel, making profit dependent on timely processing and market fluctuations during the contract term.
Copper Rolling, Drawing, Extruding, and Alloying

POSTED

2 days ago

DEADLINE

in 14 days
View Details
NAICS: 562910
New
Federal
Hazardous and Industrial Waste Disposal ServicesThe contract titled Hazardous and Industrial Waste Disposal Services is a subcontract under a Small Business Set Aside designation, aimed at ensuring the compliant disposal of stator sections containing regulated materials such as insulating compounds or oils. The work must adhere strictly to all applicable federal, state, and local environmental regulations, with particular attention to the safe handling and disposal of hazardous substances to prevent environmental contamination and ensure regulatory compliance. The performance location is specified as Pickstown, and the solicitation falls under NAICS code 562910, which corresponds to hazardous waste collection and treatment services. The opportunity was posted on July 30, 2026, with a response deadline of August 14, 2026, at 7:00 PM. It is managed by the W071 Endist Omaha office under the Department of Defense and is restricted to small businesses as defined by the SBA. Although no point of contact or specific address details are provided, the procurement is accessible through the SAM.gov portal. Contractors are expected to demonstrate proven expertise in the handling and disposal of industrial hazardous waste, particularly within defense-related contexts, and must possess the necessary permits, certifications, and operational protocols to conduct work in full compliance with environmental laws.
Remediation Services

POSTED

2 days ago

DEADLINE

in 14 days
View Details
NAICS: 484220
New
Federal
Flatbed Transportation and Hauling ServicesThe contract requires the safe and compliant transport of twenty-one stator sections from the Fort Randall Powerhouse in Pickstown, South Dakota, to off-site disposal or recycling facilities using DOT-compliant flatbed trucks capable of handling oversized and heavy industrial loads. All transportation must adhere to federal regulations for oversized cargo, including proper permitting, escort services if required, load securing protocols, and adherence to weight and dimensional restrictions on public roadways. The vendor must ensure the integrity of the components during transit and coordinate logistics to minimize disruptions and environmental impact. This is a Small Business Set Aside subcontract under NAICS code 484220, issued by the Department of Defense through W071 Endist Omaha, with a response deadline of August 14, 2026, and a posting date of July 30, 2026. The place of performance is Pickstown, South Dakota, and the solicitation is open exclusively to small businesses as defined by the SBA. Bidders are expected to demonstrate proven experience in transporting large-scale power generation components and possess the necessary equipment, insurance, and operational capacity to execute the move safely and on schedule.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

2 days ago

DEADLINE

in 14 days
View Details
NAICS: 238990
New
Federal
Stator Cutting and Dismantling ServicesThe contract entails the precise cutting and dismantling of seven generator stators at the Fort Randall Powerhouse, with each stator divided into three sections for a total of 21 segments, requiring specialized expertise in handling large, complex electrical components under strict safety protocols. This work demands meticulous planning and execution to ensure structural integrity during disassembly, minimal risk to personnel and equipment, and compliance with all safety and environmental standards applicable to hazardous industrial operations. The contract is identified as a Small Business Set Aside under the NAICS code 238990, reserved exclusively for small businesses, with an expected deadline for proposals on August 14, 2026. Work will be performed exclusively at the Pickstown location associated with the Department of Defense's W071 Endist Omaha agency, and the opportunity is posted as a subcontract under a federal procurement vehicle. All interested parties must submit responses by the stated deadline to be considered, with no further details on pricing, timeline, or technical specifications provided beyond the scope of cutting and dismantling services.
All Other Specialty Trade Contractors

POSTED

2 days ago

DEADLINE

in 14 days
View Details
NAICS: 423930
New
Federal
Fort Randall Logistical Support and Stator Custody Transfer of Remaining Stators
Solicitation # W9128F26QA089
The US Army Corps of Engineers, Omaha District, is conducting market research through a sources sought notice to identify qualified small businesses capable of handling the logistical support and custody transfer of seven remaining generator unit stators located at Fort Randall Dam in Pickstown, South Dakota. This effort is designated as a Small Business Set Aside, total, under NAICS code 423930, ensuring priority consideration for small businesses with the capacity to manage the disposition of these large, specialized components. The solicitation, issued under number W9128F26QA089, was posted on July 30, 2026, with responses due by August 14, 2026, and is being managed by the Department of Defense through the Omaha District office located in Omaha, Nebraska. Point of contact for inquiries includes Brandie Murphy as the primary representative and Sara Edwards as the secondary contact, both reachable via their official USACE email addresses. All activities related to the custody transfer, transportation, and final disposition of the stators must be performed in coordination with the agency, with performance centered at the Fort Randall Dam site. Interested parties are directed to review the attached sources sought document for detailed requirements and submit responses through the SAM.gov portal linked in the posting. This action is strictly for market research purposes and does not constitute a solicitation for proposals or a commitment to award a contract.
Recyclable Material Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 14 days
View Details
NAICS: 541990
New
Federal
SP-POL-CMP-INSPECT-NVL-PO 35
Solicitation # W9128F26QA062
This contract is for non-personnel services to conduct inspections and maintenance on Department of Defense aboveground storage tanks located at Fort Rucker, Alabama. The work includes the removal and proper disposal of remaining fuel, thorough cleaning of the tanks, replacement of wiper seals, and completion of an API-compliant internal inspection for six designated tanks. All tasks must be performed in accordance with established industry standards and safety protocols to ensure operational readiness and environmental compliance. The contract is specifically set aside for Service-Disabled Veteran-Owned Small Businesses under FAR 19.14, and the North American Industry Classification System code 541990 applies to this procurement. The solicitation is identified as SP-POL-CMP-INSPECT-NVL-PO 35 with solicitation number W9128F26QA062, posted on July 30, 2026, with responses due by August 31, 2026. The contracting office is the W071 Endist Omaha under the Department of Defense, with the physical office located in Omaha, Nebraska, and performance anticipated at a zip code area of 36362 in Alabama. Timothy Boyte serves as the primary point of contact, reachable via email and phone provided in the contract data. The opportunity is available for bidding through the SAM.gov portal.
All Other Professional, Scientific, and Technical Services

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
Federal
Mackall AAF Obstruction Survey
Solicitation # W9128F26RA138
The contract seeks architectural and engineering services to conduct an airfield obstruction survey at Mackall Army Airfield located at Fort Bragg, North Carolina, focusing on one Class A IFR runway and one UAS runway. The selected firm will be responsible for identifying, documenting, and analyzing any obstructions that could impact flight safety and navigational accuracy, ensuring compliance with federal aviation standards. The solicitation, numbered W9128F26RA138, was posted on July 28, 2026, with responses due by August 5, 2026, and falls under NAICS code 541330 for architectural and engineering services. The contracting office is the U.S. Army Corps of Engineers, Omaha District, located in Omaha, Nebraska, and the point of contact is Brian Reynolds, reachable by phone or email for inquiries. The work will be performed on-site at the airfield, and no set-aside status has been designated for this opportunity.
Engineering Services

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 541330
New
Federal
Wheeler AAF Obstruction Survey
Solicitation # W9128F26RA137
The contract solicits architectural and engineering services to conduct an airfield obstruction survey at Wheeler Army Airfield in Schofield Barracks, Hawaii, specifically targeting a Class A IFR Runway. The selected firm must deliver precise survey data to identify and document any obstructions that could impact aviation safety and navigational compliance under federal aviation standards. This work is critical for ensuring the airfield remains fully operational and meets all regulatory requirements for instrument flight operations. The solicitation, identified by number W9128F26RA137, was posted on July 28, 2026, with proposals due by August 5, 2026. It falls under NAICS code 541330 for architectural and engineering services and is managed by the Department of Defense through the Office of the U.S. Army Corps of Engineers in Omaha, Nebraska. All technical inquiries and communications should be directed to Brian Reynolds, the primary point of contact, via email or phone. The place of performance is located in Hawaii, and the contract requires on-site execution of the survey with no specified set-asides for small or disadvantaged businesses.
Engineering Services

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 237110
New
Federal
Gavins Point Raw Water Intake Zebra Mussel Mitigation
Solicitation # W9128F26QA074
The U.S. Army Corps of Engineers, Omaha District, is soliciting proposals for the design and installation of a zebra mussel mitigation system at the Gavins Point Project in Crofton, Nebraska, with the solicitation closing on August 31, 2026. This effort is exclusively open to small businesses as defined by the SBA, with a size standard of $45 million in annual receipts under NAICS code 237110 for water and sewer line construction. The project requires the contractor to supply all labor, equipment, and materials necessary to install a comprehensive abatement system safeguarding the powerhouse’s raw water intakes and associated piping, including two local tank skids with integral spill containment, two pump skids for distribution, electrical power connections to distribution equipment, and integration with existing raw water flow meters. A mandatory site visit is scheduled for August 5, 2026, with further details outlined in the solicitation under FAR Clause 52.236-27. The contractor must begin work immediately upon contract award and complete all work within 210 calendar days of receiving the Notice to Proceed, though this timeline remains subject to adjustment after solicitation issuance. Project costs are estimated between $250,000 and $500,000. All inquiries must be submitted through ProjNet, as specified in the solicitation, and the performance location is Gavins Point Project at Crofton, Nebraska 68730. The contracting office is located at 616 Capital Ave, Omaha, NE 68102, with Brianna Wohlers listed as the primary point of contact for technical and procedural questions regarding the solicitation.
Water and Sewer Line and Related Structures Construction

POSTED

4 days ago

DEADLINE

in about 1 month
View Details